Reviews & Opinions
Independent and trusted. Read before buy Cateye CC St200!

Cateye CC St200

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Cateye CC St200, size: 243 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Cateye CC St200About Cateye CC St200
Here you can find all about Cateye CC St200 like manual and other informations. For example: review.

Cateye CC St200 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Cateye CC St200 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Cateye CC St200 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
pilatu 6:16pm on Thursday, November 4th, 2010 
i just recently bought this laptop when i try to find a good laptop to play online games. from the appearance.
jonny-flash 3:20am on Tuesday, November 2nd, 2010 
That laps rocks... Good Speakers For HD Sound ; The Fingerprint Sensor is cool The screen has no TFT!!!compared to Dell and Sony Have had my A200 for over twelve months and it has performed great in every way, all the time.
alexwren 9:12am on Monday, September 27th, 2010 
Toshiba Laptop(s) We ordered two of these laptops - infact I first recommended to my daughter - so we actually have 3 in the family they ... A good little Laptop, no probems at all with it. I bought this laptop in the spring of 2008, to use mainly for the internet.
Snip 12:23am on Monday, September 13th, 2010 
Does what it says on the tin Good quality keyboard at a reasonable price. Toshiba Laptop(s) We ordered two of these laptops - infact I first recommended to my daughter - so we actually have 3 in the family they both arrived...
alan.chesterman@yahoo.co. 10:17am on Monday, August 23rd, 2010 
Handles well , gives much better balance when shooting vertically ,doubles your shooting time when another battery is added
VeniVidi 7:14pm on Monday, August 2nd, 2010 
Love it. Just as good now as the day we got it a year and 2 months ago. Excellent value and really enjoyable to use.
speener 12:03pm on Thursday, July 1st, 2010 
Handles well , gives much better balance when shooting vertically ,doubles your shooting time when another battery is added
Dyyryath 10:26pm on Sunday, April 18th, 2010 
had this machine for just over 12 months, no problems except for 1 day when i opened the top, the inside of my screen had blew up, lcd...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

CATEYE TOMO

CYCLOCOMPUTER Model CC-ST200
Setting Values Cross Reference Table (The tire size is marked on both sides of the tire.)
TIRE SIZE TIRE SIZE TIRE SIZE
20 x 1.x x 3/4 Tubular 24 x 1-1/8 Tubular 24 x 1-1/x 1.x 2.x 2.x 1(559mm) 26 x 1(650c) 26 x 1.x 1-1/8 Tubular 26 x 1-3/x 1-1/2

207 210

26 x 1.x 1.x 1.x 1.x 2.x 2.x 2.x 2.x x 1-1/x 1-1/x 1-3/x 35A 650 x 38A

209 212

650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 44C
U.S. Pat. Nos. 4636769/4642606/5236759/5226340/5264791 and Design Patented Copyright 1996 CATEYE Co., Ltd. CCMST2-970214 Printed in Japan 0687261

TROUBLE SHOOTING

The following situations do not indicate malfunction of the cyclocomputer. Check the following before taking to repair. * When current speed does not appear, short-circuit the contact on the back with metal. The unit will function normally if the speed display appears. Display response is slow. ----- Is it at a low temperature under 32F(0C)? ----- It returns to normal state when temperature rises. No display. ----- Has the Lithium Battery in the main unit worn out? ----- Replace the Lithium Battery with a new one. Incorrect data appear. ----- Execute "All Clear" operation. Current speed does not appear. ----- Is there anything on the contact of the main unit or of the bracket? ----- Wipe the contact clean. ----- Is the distance between sensor and magnet too far? ----- Are the marking line of the sensor and the center of magnet matched each other? ----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly. ----- Is the wire broken? ----- Replace the Bracket & Sensor part with a new one. Transmission signal loss in damp or wet conditions. ----- Water or condensation may collect between the bracket sensor and the computer causing an interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use industrial water repellent; it may damage the bracket. When the S/S button is pressed, the unit doesn't activate or stop. ----- Is the unit in the Auto function? ----- The S/S button doesn't function in the Auto function.

#169-6160/#169-6165

Bracket Sensor Kit/(Long)

#169-6168

Bracket Sensor Kit for Aero Bar

#169-6167

Center Mount Bracket Kit

MAINTENANCE/PRECAUTIONS

Do not leave the main unit exposed to direct sunlight when the unit is not in use. Do not disassemble the main unit, sensor and magnet. Don't pay too much attention to your computer's functions while riding! Keep your eyes on the road and duly consider to traffic safety. Check relative position of sensor and magnet periodically. For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply paint thinner, benzine, or alcohol, to avoid damages on the surface. If there is mud, sand or the like clogs between the button and the body, the movement of the button may be disturbed. Softly wash away such objects with water.

#169-6169

SPECIFICATIONS
Applicable Cycle Sizes Applicable Fork Diameter The length of the wire Power Supply Battery Life 130cm - 229cm 11 - 36 (S:11 - 26 L:21 - 36) 70cm Lithium Battery (CR1620/CR1616) x 1 Approx. 3 years(The life of the first factory-loaded battery may be shorter than this period.) Dimension/Weight 1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g) Controller 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display Liquid Crystal Display Sensor No Contakt Magnetic Sensor Operating Temperature Range 0C - 40C(32F - 104F) * The specifications and design are subject to change without notice.

#169-9731

Heavy Duty Wire and Bracket Sensor Kit

#169-6170

Attachment Kit

LIMITED WARRANTY

1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded)
If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and transportation charges to our service shall be borne by person desiring service.

#169-6280

Universal Sensor Band

(Address for service)

CO.,LTD. 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CATEYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone: 303-443-4595 Toll Free: 800-5CATEYE Fax: 303-473-0006 e-mail: CatEyeUSA@aol.com

#166-5120

Wheel Magnet

#169-6180

Lithium Battery (CR1620)

OPERATING INSTRUCTIONS

A. B. C. D. E. F. G. Main Display (Speed) Sensor Pulse Symbol Mode Symbol Speed Scale Symbol Auto Mode Symbol Sub-Display (Selected Function) M (Mode) Button H. I. J. K. S/S (Start/Stop) Button Set Button Battery Case Cover Contact 1. 2. 3. 4. 5. 6. 7. Bracket 8. Bracket Rubber Pad (2 pcs.) Wire 9. Wire Securing Tape Sensor 10. Sensor Band Screw Sensor Bands-A (S)(L) Sensor Bands-B Magnet Sensor Band Rubber Pad

CA T EY E

MOUNTING TO BIKE
The spokes must run correctly through the inside the magnet as in fig.8. Attach the sensor with Sensor Bands-A-B to the right fork. Choose a band that fits the fork diameter (S size for up to 24, L for oversize). 1. Insert the band-B into the slit of the band-A, and put the rubber pad inside of the band-A(fig. 9). Adjust the length in order that the screw-fastening part of the bands are parallel when mounted to the fork(fig. 10). *To pull out the band B from band A, tug strongly. 2. Mount the adjusted bands to the fork along with the sensor, by temporarily tightening the screw(fig. 11). 3. Align the magnet's center and the sensor's marking line(fig. 12), and make sure of 2mm clearance between the magnet and sensor (fig. 13). Then tighten the screw securely. Cut the excess of the band-B with a nipper or the like. Secure the wire with tape as fig. 14. Wind the wire round the outer cable and adjust length. Loosen the wire in the area marked with the arrow so that the wire does not hinder handlebar operation. Use either 1mm- or 2 mm-thick pads if necessary, according to handlebar diameter. Attach the bracket close to the handlebar stem (fig. 15). Slide main unit onto the bracket from front until it clicks into position. To remove, pull it off forward while pushing down the lever. (fig. 16)

MAIN UNIT PREPARATION

The following must be completed before operating. (1) How to measure wheel circumference (L) of your bike (Fig.4)
Put a mark on the tire tread and ride the bike one full wheel revolution. Mark the start and the end of the revolution on the ground and then measure the distance between the two marks. This is your actual circumference. Or, the "Selecting Values Cross Reference Table" tells you an approximate circumference according to tire size.

(2) Setting Speed Scale

Preform all clear operation. All displays will illuminate. Then mile/h alone will be displayed as illustrated in fig.5. Km/h and mile/h are alternately displayed with each press of S/S button. Press M button to set desired speed scale. The display will change as fig. 6.
(3) Setting the wheel circumference (Fig.6)
The standard wheel circumference of 216 cm for 27" wheel is displayed. When using 216 cm without revision, press M button. ODO will be displayed and 216 cm is set. For revision, press S/S button to increase the number by one. To increase rapidly, hold down the button. When the desired number appears, press M button. ODO will be displayed, and the desired number is set.

Test (Fig.16)

Mount main unit. If main display does not show any figures, press either M button or S/S button to release from power saving function. Spin the wheel to check if sensor pulse symbol flashes. If not, adjust relative positions of magnet and sensor following the instructions.
sensor band A sporkes sensor band B
(4) Resetting or changing the wheel circumference
Set main unit in ODO with M button, and stop it with S/S button. Press SET button. The stored number will flicker on the sub-display. Revise the number as desired according to the instructions in (3).
sensor band B rubber pad screw sensor band A parallel Fig.10 sensor fork Fig.11 bracket outer cable
Setting the clock time (Fig.7)
Press M button over 2 seconds to select , and stop it with S/S button. Then press SET button, and minutes flash. Press S/S button to advance minutes by one. To advance rapidly, hold down the button. Set the time one or two minutes ahead of the current time. Then press M button, and hours will flash. Use S/S button the same way. Press SET button to complete time setting. *When you press the SET button, the undisplayed seconds will turn to zero. For accuracy, set by the radio time signal.

rubber pad magnet Fig.8 sensor band A Fig.9

markingline of sensor

magnet

sensor rubber pad

MEASURING AND DISPLAY FUNCTIONS

screw cap Fig.15 lever

ODO DST
Current Speed 0.0(3.0) - 65 mile/h(27inch) 1 mile/h under31 miles/h This is always displayed on the main display and updated once a second. SPD
0.0 - 9999.9 mile 0.1 mile This is continuously measured until battery wears down or all clear operation is done. At 10,000 miles(km), it returns to zero and counting begins anew.
center of magnet about 2mm Fig.13 Fig.12
wire securing tape wire Fig.14
ODO Total Distance (Odometer)
HOW TO REPLACE THE BATTERY
Turn main unit over, remove battery case cover with coin and insert a new lithium battery properly (CR1620 or CR1616) with the (+) pole upward (fig.17), and close the cover securely. * Please make sure to do the All Clear operation after replacing battery, and to set the unit again.

Fig.16

Trip Distance 0.00 - 999.99 mile 0.01 mile The trip distance from start to current point is displayed. With Reset operation, it returns to zero. DST Elapsed Time 0:00'00" - 9:59'59" 0.003 % Elapsed time is measured from start to current point, in units of hours, minutes and seconds. At 10 hours, it returns to zero and counting begins anew. With Reset operation, it returns to zero. TM AVS Average Speed 0.0 - 65.0mile/h 0.3 mile/h The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99 miles (km). If either is exceeded, (.E) is displayed and calculation ceases.
0.0(3.0) - 65 mile/h(27inch) 1 mile/h With Reset operation, it returns to zero and counting begins anew.

Fig.17

BUTTON FUNCTION

M button (Fig.1)

Changes the display in the order shown in fig. 1, and data is displayed on the subdisplay. *If held over 2 seconds, 12-hour clock appears.

MXS ODO DST TM AVS

S/S button
Starts and stops the measurement of trip distance and elapsed time. During operation, speed scale symbol flashes. In Auto Function, this button is invalid.

MXS Maximum Speed

12-hour clock time
The current time is displayed by a 12-hour clock.

0:00' - 11:59' 0.003 %

SET Button
This is for setting the wheel circumference and clock time, switching on/off Auto Function and to clear all present data and any irregularity. When pressed in stop state in each mode, the following can be revised. In ODO mode --------------------- Wheel circumference In mode ----------------------- 12-hour clock In TM, DST or AVS mode ----- On/off the Auto function
AUTO (AUTOMATIC START/STOP) FUNCTION

Reset Operation: (Fig.2)

Select any mode except ODO, then press M button and S/S button simultaneously. MXS, AVS, DST and TM will become zero. (When done in ODO, registered wheel circumference will be displayed.) RESET
All Clear Operation: (Fig.3)
When M button, S/S and set buttons are pressed simultaneously, all data stored (ODO, speed scale, Wheel circumference and clock time) is erased. All displays illuminate, then mile/h symbol illuminates. This should only be executed after replacing battery or when irregular display occurs due to static electricity, etc. Since all memories are erased, set necessary data again according to "Main Unit Preparation". ALL CLEAR
This function switches the main unit to start or stop automatically, in which AUTO symbol appears on the screen, and you are free from pressing S/S button each time. How to switch on/off the Auto Function. In TM, DST or AVS, this function switches on/off with each press of SET button. When on, AUTO symbol appears. *With this function, it ceases measuring elapsed time during a stop. * 2 seconds may be elapsed if mount the main unit to the bracket with this function on.

POWER SAVING FUNCTION

When main unit is left without receiving any signal for 60-70 minutes continuously, power supply is shut down and main unit will display ( ) only as the figure. By pressing M button or S/S button, or by receiving signal, this function is released.

doc1

CATEYE TOMO XC

CYCLOCOMPUTER Model CC-ST200

[with Heavy Duty Wire]

Setting Values Cross Reference Table
(The tire size is marked on both sides of the tire.) TIRE SIZE 20 x 1.x x 3/4 Tubular 24 x 1-1/8 Tubular 24 x 1-1/x 1.x 2.x 2.x 1(559mm) 26 x 1(650c) 26 x 1.x 1-1/8 Tubular 26 x 1-3/x 1-1/2 L(cm) TIRE SIZE 26 x 1.x 1.x 1.x 1.x 2.x 2.x 2.x 2.x x 1-1/x 1-1/x 1-3/x 35A 650 x 38A L(cm) TIRE SIZE 650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 44C L(cm) 222
U.S. Pat. Nos. 4636769/4642606/5236759/5226340 and Design Patented

MOUNTING TO BIKE

Copyright 1999 CATEYE Co., Ltd. CCMSTxch1-991124 Printed in Malaysia 066600035

SPECIFICATIONS

Controller ----------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display -------------------------------------- Liquid Crystal Display Sensor -------------------------------------- No Contact Magnetic Sensor Operating Temperature Range ------- 0C - 40C (32F - 104F) Applicable Cycle Sizes ------------------ 130cm - 229cm The length of the wire ------------------- 70cm Applicable Fork Diameter -------------- 11 - 40 (S:11 - 26 L:21 - 40) Power Supply ----------------------------- Lithium Battery (CR1620 or CR1616) x 1 Battery Life --------------------------------- Approx. 3 years(The life of the first factory-loaded battery may be shorter than this period.) Dimension/Weight ------------------------ 1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g) * The specifications and design are subject to change without notice.

LIMITED WARRANTY

1-Year Warranty for Main Unit Only
(Accessories/Attachments and Battery Consumption excluded) If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and transportation charges to our service shall be borne by person desiring service.

1. 2. 3. 4. 5. 6.

Bracket 7. Sensor Band Rubber Pad Wire 8. Bracket Rubber Pad (2 pcs.) Sensor 9. Nylon Tie (3 pcs.) Sensor Bands-A (S)(L) 10. Sensor Band Screw (S)(L) Sensor Bands-B 11. Spiral Tube Magnet

(Address for service)

The spokes must run correctly through the inside the magnet as in fig.1. Attach the sensor with Sensor Bands-A-B to the right fork. Choose a band that fits the fork sporkes diameter (S size for up to 24, L for oversize). If the front fork is thick, use the longer screw. 1. Insert the band-B into the slit of the bandFig.1 A, and put the rubber pad inside of the sensor band B band-A(fig. 2). Adjust the length in order that the screw-fastening part of the bands are parallel when mounted to the fork(fig. rubber pad sensor band B 3). *To pull out the band B from band A, tug strongly. sensor band A 2. Mount the adjusted bands to the fork along Fig.2 rubber pad with the sensor, by temporarily tightening the screw(fig. 4). sensor band A sensor band A 3. Align the magnet's center and the sensor's Fig.3 parallel marking line(fig. 5), and make sure of 2mm clearance between the magnet and sensor (fig. 6). Then tighten the screw screw securely. Cut the excess of the band-B with a nipper or the like. sensor fork Secure the wire with nylon ties as shown in markingline Fig.4 fig. 7. Wind the wire round the outer cable of sensor and wrap these wires with the spiral tube. Adjust the length of the wire. Loosen the wire in the area marked with the arrow so that the center of sensor magnet wire does not hinder handlebar operation. Use either 1mm- or 2 mm-thick pads if necessary, according to handlebar diameter. Fig.5 Attach the bracket close to the handlebar stem (fig. 8). about 2mm Slide main unit onto the bracket from front until it clicks into position. To remove, pull it Fig.6 magnet off forward while pushing down the lever. (fig. outer cable 9)

magnet spiral tube

CO.,LTD. 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CAT EYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone : 303-443-4595 Toll Free: 800-5CATEYE Fax : 303-473-0006 e-mail: CatEyeUSA@aol.com

#169-9731

Heavy Duty Wire and Bracket Sensor Kit

#169-9771

Bracket Sensor Kit for Extra Large Fork

#169-6168

Bracket Sensor Kit for Aero Bar

#169-6167

Center Mount Bracket Kit

#169-6169

Stem Mount Bracket Kit

nyron ties wire Fig.7

Test Mount main unit. If main display does not show any figures, press either M button or S/S button to release from power saving function. Spin the wheel to check if sensor pulse symbol flashes. If not, adjust relative positions of magnet and sensor following the instructions.

#169-9750

Attachment Kit (For Heavy Duty Wire)

#169-9751

Attachment Kit (For TOMO XC)

#166-5120

#169-6180

Lithium Battery(CR1620)

Wheel Magnet

bracket

rubber pad
Slide the main unit onto the bracket from front until it clicks into position. To remove it, pull it off forward while pushing down the lever. (Fig.9)
MEASURING AND DISPLAY FUNCTIONS

OPERATING INSTRUCTIONS

Current Speed
0.0(3.0) - 65 mile/h(27inch) 1 mile/h under31 miles/h
This is always displayed on the main display and updated once a second.

TOMO XC

A. B. C. D. E. F. G. H. I. J. K.
Main Display (Speed) Sensor Pulse Symbol Mode Symbol Speed Scale Symbol Auto Mode Symbol Sub-Display (Selected Function) M (Mode) Button S/S (Start/Stop) Button Set Button Battery Case Cover Contact
ODO Total Distance (Odometer)
0.0 - 9999.9 mile 0.1 mile
This is continuously measured until battery wears down or all clear operation is done. At 10,000 miles(km), it returns to zero and counting begins anew. DST Trip Distance
0.00 - 999.99 mile 0.01 mile
The trip distance from start to current point is displayed. With Reset operation, it returns to zero. TM Elapsed Time
0:00'00" - 9:59'59" 0.003 %

BUTTON FUNCTION

MXS ODO DST TM AVS
M button (Fig.1) Changes the display in the order shown in fig. 1, and data is displayed on the sub-display. *If held over 2 seconds, 12-hour clock appears. S/S button Starts and stops the measurement of trip distance and elapsed time. During operation, speed scale symbol flashes. In Auto Function, this button is invalid.
Elapsed time is measured from start to current point, in units of hours, minutes and seconds. At 10 hours, it returns to zero and counting begins anew. With Reset operation, it returns to zero. AVS Average Speed
0.0 - 65.0mile/h 0.3 mile/h
The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99 miles (km). If either is exceeded, (.E) is displayed and calculation ceases. MXS Maximum Speed
0.0(3.0) - 65 mile/h(27inch) 1 mile/h
SET Button This is for setting the wheel circumference and clock time, switching on/off Auto Function and to clear all present data and any irregularity. When pressed in stop state in each mode, the following can be revised. In ODO mode ------------------ Wheel circumference In mode -------------------- 12-hour clock In TM, DST or AVS mode --- On/off the Auto function Reset Operation: (Fig.2) Select any mode except ODO, then press M button and S/S button simultaneously. MXS, AVS, DST and TM will become zero. (When done in ODO, registered wheel circumference will be displayed.) All Clear Operation: (Fig.3) When M button, S/S and set buttons are pressed simultaneously, all data stored (ODO, speed scale, Wheel circumference and clock time) is erased. All displays illuminate, then mile/h symbol illuminates. This should only be executed after replacing battery or when irregular display occurs due to static electricity, etc. Since all memories are erased, set necessary data again according to "Main Unit Preparation".
With Reset operation, it returns to zero and counting begins anew.
12-hour clock time The current time is displayed by a 12-hour clock.

0:00' - 11:59' 0.003 %

AUTO (AUTOMATIC START/STOP) FUNCTION

Reset Operation

All Clear Operation
This function switches the main unit to start or stop automatically, in which AUTO symbol appears on the screen, and you are free from pressing S/S button each time. How to switch on/off the Auto Function. In TM, DST or AVS, this function switches on/off with each press of SET button. When on, AUTO symbol appears. *With this function, it ceases measuring elapsed time during a stop. * 2 seconds may be elapsed if mount the main unit to the bracket with this function on.

POWER SAVING FUNCTION

When main unit is left without receiving any signal for 60-70 minutes continuously, power supply is shut down and main unit will display ( ) only as the figure. By pressing M button or S/S button, or by receiving signal, this function is released.

MAIN UNIT PREPARATION

The following must be completed before operating. (1) How to measure wheel circumference (L) of your bike (Fig.4) Put a mark on the tire tread and ride the bike one full wheel revolution. Mark the start and the end of the revolution on the ground and then measure the distance between the two marks. This is your actual circumference. Or, the "Setting Values Cross Reference Table" tells you an approximate circumference according to tire size. (2) Setting Speed Scale Preform all clear operation. All displays will illuminate. Then mile/h alone will be displayed as illustrated in fig.5. Km/h and mile/h are alternately displayed with each press of S/S button. Press M button to set desired speed scale. The display will change as fig. 6. (3) Setting the wheel circumference (Fig.6) The standard wheel circumference of 216 cm for 27" wheel is displayed. When using 216 cm without revision, press M button. ODO will be displayed and 216 cm is set. For revision, press S/S button to increase the number by one. To increase rapidly, hold down the button. When the desired number appears, press M button. ODO will be displayed, and the desired number is set. (4) Resetting or changing the wheel circumference Set main unit in ODO with M button, and stop it with S/S button. Press SET button. The stored number will flicker on the sub-display. Revise the number as desired according to the instructions in (3). Setting the clock time (Fig.7) Press M button over 2 seconds to select , and stop it with S/S button. Then press SET button, and minutes flash. Press S/S button to advance minutes by one. To advance rapidly, hold down the button. Set the time one or two minutes ahead of the current time. Then press M button, and hours will flash. Use S/S button the same way. Press SET button to complete time setting. *When you press the SET button, the undisplayed seconds will turn to zero. For accuracy, set by the radio time signal.

TROUBLE SHOOTING

The following situations do not indicate malfunction of the cyclocomputer. Check the following before taking to repair. * When current speed does not appear, short-circuit the contact on the back with metal. The unit will function normally if the speed display appears. Display response is slow. ----- Is it at a low temperature under 32F(0C)? ----- It returns to normal state when temperature rises. No display. ----- Has the Lithium Battery in the main unit worn out? ----- Replace the Lithium Battery with a new one. Incorrect data appear. ----- Execute "All Clear" operation. Current speed does not appear. ----- Is there anything on the contact of the main unit or of the bracket? ----- Wipe the contact clean. ----- Is the distance between sensor and magnet too far? ----- Are the marking line of the sensor and the center of magnet matched each other? ----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly. ----- Is the wire broken? ----- Replace the Bracket & Sensor part with a new one. Transmission signal loss in damp or wet conditions. ----- Water or condensation may collect between the bracket sensor and the computer causing an interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use industrial water repellent; it may damage the bracket. When the S/S button is pressed, the unit doesn't activate or stop. ----- Is the unit in the Auto function? ----- The S/S button doesn't function in the Auto function.

MAINTENANCE/PRECAUTIONS

Do not leave the main unit exposed to direct sunlight when the unit is not in use. Do not disassemble the main unit, sensor and magnet. Don't pay too much attention to your computer's functions while riding! Keep your eyes on the road and duly consider to traffic safety. Check relative position of sensor and magnet periodically. For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply paint thinner, benzine, or alcohol, to avoid damages on the surface. If there is mud, sand or the like clogs between the button and the body, the movement of the button may be disturbed. Softly wash away such objects with water.

close open

HOW TO REPLACE THE BATTERY
Turn main unit over, remove battery case cover with coin and insert a new lithium battery properly (CR1620 or CR1616) with the (+) pole upward (fig.8), and close the cover securely.
* Please make sure to do the All Clear operation after replacing battery, and to set the unit again.

 

Tags

CDC-645 Attack T813V PR6Y22CHB Thinkpad A22E Maximus GR-L247STB LE32R71W CDX-636 Glide SGH-I900L 32LG5500 KV-29LS30E CVP-202 HS020GB Lifeplus EW1266F Finedrive 400 WTC1061K Cookbook Timex W-15 RLT5031AH 18 A1 Mark-S 712 I-mate JAM Caffe Solo 40C6900 R-X300 DVH-P5050MP Mediaimprerssion Powerpod K16 Purifier XE3L-GF LTV-2701 19LS4R EWD2204 C 303 MH035fnea CD-450 X-970T Kompernass 9149 Yeti S Touch PRO AJ3231 AMP CAN 37LF65 Samsung L83T NP-X60 Infiny X-240 P4S800d-X Lowrance X71 CRW2200UX SDM-S93 HR1364 Dresden C31 YDP-S30 WD-D84S Minolta 7075 C188-05D-19-02 ST110 TLP 680U LE37A450c2 DLE6977S PV-GS29 XSU-00850B KLX 140 TA-FB930R S12AW Se0 Review DP-760 Officejet 4300 C-460 Zoom DV-HRD2 CFD-E95L VT 9152 SC-AK280 ST100 Lide 600F YST-SW1500 EX-S2 CD-BA2010H Server Mark II EMP-TW980 96-10 Ultra-DR Piano Pearl 2000 USA-19HS VP-D230 PV-4C G41D3 Deere 6010 Powershot G6 TX-28PL10P Voyage 200 Canon EOS1 Cake 2003 Nissan Note PLR 50

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101