CATEYE TOMO XC

CYCLOCOMPUTER Model CC-ST200

[with Heavy Duty Wire]

Setting Values Cross Reference Table
(The tire size is marked on both sides of the tire.) TIRE SIZE 20 x 1.x x 3/4 Tubular 24 x 1-1/8 Tubular 24 x 1-1/x 1.x 2.x 2.x 1(559mm) 26 x 1(650c) 26 x 1.x 1-1/8 Tubular 26 x 1-3/x 1-1/2 L(cm) TIRE SIZE 26 x 1.x 1.x 1.x 1.x 2.x 2.x 2.x 2.x x 1-1/x 1-1/x 1-3/x 35A 650 x 38A L(cm) TIRE SIZE 650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 44C L(cm) 222
U.S. Pat. Nos. 4636769/4642606/5236759/5226340 and Design Patented

MOUNTING TO BIKE

Copyright 1999 CATEYE Co., Ltd. CCMSTxch1-991124 Printed in Malaysia 066600035

SPECIFICATIONS

Controller ----------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display -------------------------------------- Liquid Crystal Display Sensor -------------------------------------- No Contact Magnetic Sensor Operating Temperature Range ------- 0C - 40C (32F - 104F) Applicable Cycle Sizes ------------------ 130cm - 229cm The length of the wire ------------------- 70cm Applicable Fork Diameter -------------- 11 - 40 (S:11 - 26 L:21 - 40) Power Supply ----------------------------- Lithium Battery (CR1620 or CR1616) x 1 Battery Life --------------------------------- Approx. 3 years(The life of the first factory-loaded battery may be shorter than this period.) Dimension/Weight ------------------------ 1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g) * The specifications and design are subject to change without notice.

LIMITED WARRANTY

1-Year Warranty for Main Unit Only
(Accessories/Attachments and Battery Consumption excluded) If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and transportation charges to our service shall be borne by person desiring service.

1. 2. 3. 4. 5. 6.

Bracket 7. Sensor Band Rubber Pad Wire 8. Bracket Rubber Pad (2 pcs.) Sensor 9. Nylon Tie (3 pcs.) Sensor Bands-A (S)(L) 10. Sensor Band Screw (S)(L) Sensor Bands-B 11. Spiral Tube Magnet

(Address for service)

The spokes must run correctly through the inside the magnet as in fig.1. Attach the sensor with Sensor Bands-A-B to the right fork. Choose a band that fits the fork sporkes diameter (S size for up to 24, L for oversize). If the front fork is thick, use the longer screw. 1. Insert the band-B into the slit of the bandFig.1 A, and put the rubber pad inside of the sensor band B band-A(fig. 2). Adjust the length in order that the screw-fastening part of the bands are parallel when mounted to the fork(fig. rubber pad sensor band B 3). *To pull out the band B from band A, tug strongly. sensor band A 2. Mount the adjusted bands to the fork along Fig.2 rubber pad with the sensor, by temporarily tightening the screw(fig. 4). sensor band A sensor band A 3. Align the magnet's center and the sensor's Fig.3 parallel marking line(fig. 5), and make sure of 2mm clearance between the magnet and sensor (fig. 6). Then tighten the screw screw securely. Cut the excess of the band-B with a nipper or the like. sensor fork Secure the wire with nylon ties as shown in markingline Fig.4 fig. 7. Wind the wire round the outer cable of sensor and wrap these wires with the spiral tube. Adjust the length of the wire. Loosen the wire in the area marked with the arrow so that the center of sensor magnet wire does not hinder handlebar operation. Use either 1mm- or 2 mm-thick pads if necessary, according to handlebar diameter. Fig.5 Attach the bracket close to the handlebar stem (fig. 8). about 2mm Slide main unit onto the bracket from front until it clicks into position. To remove, pull it Fig.6 magnet off forward while pushing down the lever. (fig. outer cable 9)

magnet spiral tube

CO.,LTD. 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CAT EYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone : 303-443-4595 Toll Free: 800-5CATEYE Fax : 303-473-0006 e-mail: CatEyeUSA@aol.com

#169-9731

Heavy Duty Wire and Bracket Sensor Kit

#169-9771

Bracket Sensor Kit for Extra Large Fork

#169-6168

Bracket Sensor Kit for Aero Bar

#169-6167

Center Mount Bracket Kit

#169-6169

Stem Mount Bracket Kit

nyron ties wire Fig.7

Test Mount main unit. If main display does not show any figures, press either M button or S/S button to release from power saving function. Spin the wheel to check if sensor pulse symbol flashes. If not, adjust relative positions of magnet and sensor following the instructions.

#169-9750

Attachment Kit (For Heavy Duty Wire)

#169-9751

Attachment Kit (For TOMO XC)

#166-5120

#169-6180

Lithium Battery(CR1620)

Wheel Magnet

bracket

rubber pad
Slide the main unit onto the bracket from front until it clicks into position. To remove it, pull it off forward while pushing down the lever. (Fig.9)
MEASURING AND DISPLAY FUNCTIONS

OPERATING INSTRUCTIONS

Current Speed
0.0(3.0) - 65 mile/h(27inch) 1 mile/h under31 miles/h
This is always displayed on the main display and updated once a second.

TOMO XC

A. B. C. D. E. F. G. H. I. J. K.
Main Display (Speed) Sensor Pulse Symbol Mode Symbol Speed Scale Symbol Auto Mode Symbol Sub-Display (Selected Function) M (Mode) Button S/S (Start/Stop) Button Set Button Battery Case Cover Contact
ODO Total Distance (Odometer)
0.0 - 9999.9 mile 0.1 mile
This is continuously measured until battery wears down or all clear operation is done. At 10,000 miles(km), it returns to zero and counting begins anew. DST Trip Distance
0.00 - 999.99 mile 0.01 mile
The trip distance from start to current point is displayed. With Reset operation, it returns to zero. TM Elapsed Time

0:00'00" - 9:59'59" 0.003 %

BUTTON FUNCTION

MXS ODO DST TM AVS
M button (Fig.1) Changes the display in the order shown in fig. 1, and data is displayed on the sub-display. *If held over 2 seconds, 12-hour clock appears. S/S button Starts and stops the measurement of trip distance and elapsed time. During operation, speed scale symbol flashes. In Auto Function, this button is invalid.
Elapsed time is measured from start to current point, in units of hours, minutes and seconds. At 10 hours, it returns to zero and counting begins anew. With Reset operation, it returns to zero. AVS Average Speed
0.0 - 65.0mile/h 0.3 mile/h
The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99 miles (km). If either is exceeded, (.E) is displayed and calculation ceases. MXS Maximum Speed
0.0(3.0) - 65 mile/h(27inch) 1 mile/h
SET Button This is for setting the wheel circumference and clock time, switching on/off Auto Function and to clear all present data and any irregularity. When pressed in stop state in each mode, the following can be revised. In ODO mode ------------------ Wheel circumference In mode -------------------- 12-hour clock In TM, DST or AVS mode --- On/off the Auto function Reset Operation: (Fig.2) Select any mode except ODO, then press M button and S/S button simultaneously. MXS, AVS, DST and TM will become zero. (When done in ODO, registered wheel circumference will be displayed.) All Clear Operation: (Fig.3) When M button, S/S and set buttons are pressed simultaneously, all data stored (ODO, speed scale, Wheel circumference and clock time) is erased. All displays illuminate, then mile/h symbol illuminates. This should only be executed after replacing battery or when irregular display occurs due to static electricity, etc. Since all memories are erased, set necessary data again according to "Main Unit Preparation".
With Reset operation, it returns to zero and counting begins anew.
12-hour clock time The current time is displayed by a 12-hour clock.

0:00' - 11:59' 0.003 %

AUTO (AUTOMATIC START/STOP) FUNCTION

Reset Operation

All Clear Operation
This function switches the main unit to start or stop automatically, in which AUTO symbol appears on the screen, and you are free from pressing S/S button each time. How to switch on/off the Auto Function. In TM, DST or AVS, this function switches on/off with each press of SET button. When on, AUTO symbol appears. *With this function, it ceases measuring elapsed time during a stop. * 2 seconds may be elapsed if mount the main unit to the bracket with this function on.

POWER SAVING FUNCTION

When main unit is left without receiving any signal for 60-70 minutes continuously, power supply is shut down and main unit will display ( ) only as the figure. By pressing M button or S/S button, or by receiving signal, this function is released.

MAIN UNIT PREPARATION

The following must be completed before operating. (1) How to measure wheel circumference (L) of your bike (Fig.4) Put a mark on the tire tread and ride the bike one full wheel revolution. Mark the start and the end of the revolution on the ground and then measure the distance between the two marks. This is your actual circumference. Or, the "Setting Values Cross Reference Table" tells you an approximate circumference according to tire size. (2) Setting Speed Scale Preform all clear operation. All displays will illuminate. Then mile/h alone will be displayed as illustrated in fig.5. Km/h and mile/h are alternately displayed with each press of S/S button. Press M button to set desired speed scale. The display will change as fig. 6. (3) Setting the wheel circumference (Fig.6) The standard wheel circumference of 216 cm for 27" wheel is displayed. When using 216 cm without revision, press M button. ODO will be displayed and 216 cm is set. For revision, press S/S button to increase the number by one. To increase rapidly, hold down the button. When the desired number appears, press M button. ODO will be displayed, and the desired number is set. (4) Resetting or changing the wheel circumference Set main unit in ODO with M button, and stop it with S/S button. Press SET button. The stored number will flicker on the sub-display. Revise the number as desired according to the instructions in (3). Setting the clock time (Fig.7) Press M button over 2 seconds to select , and stop it with S/S button. Then press SET button, and minutes flash. Press S/S button to advance minutes by one. To advance rapidly, hold down the button. Set the time one or two minutes ahead of the current time. Then press M button, and hours will flash. Use S/S button the same way. Press SET button to complete time setting. *When you press the SET button, the undisplayed seconds will turn to zero. For accuracy, set by the radio time signal.

TROUBLE SHOOTING

The following situations do not indicate malfunction of the cyclocomputer. Check the following before taking to repair. * When current speed does not appear, short-circuit the contact on the back with metal. The unit will function normally if the speed display appears. Display response is slow. ----- Is it at a low temperature under 32F(0C)? ----- It returns to normal state when temperature rises. No display. ----- Has the Lithium Battery in the main unit worn out? ----- Replace the Lithium Battery with a new one. Incorrect data appear. ----- Execute "All Clear" operation. Current speed does not appear. ----- Is there anything on the contact of the main unit or of the bracket? ----- Wipe the contact clean. ----- Is the distance between sensor and magnet too far? ----- Are the marking line of the sensor and the center of magnet matched each other? ----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly. ----- Is the wire broken? ----- Replace the Bracket & Sensor part with a new one. Transmission signal loss in damp or wet conditions. ----- Water or condensation may collect between the bracket sensor and the computer causing an interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use industrial water repellent; it may damage the bracket. When the S/S button is pressed, the unit doesn't activate or stop. ----- Is the unit in the Auto function? ----- The S/S button doesn't function in the Auto function.

MAINTENANCE/PRECAUTIONS

Do not leave the main unit exposed to direct sunlight when the unit is not in use. Do not disassemble the main unit, sensor and magnet. Don't pay too much attention to your computer's functions while riding! Keep your eyes on the road and duly consider to traffic safety. Check relative position of sensor and magnet periodically. For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply paint thinner, benzine, or alcohol, to avoid damages on the surface. If there is mud, sand or the like clogs between the button and the body, the movement of the button may be disturbed. Softly wash away such objects with water.

close open

HOW TO REPLACE THE BATTERY
Turn main unit over, remove battery case cover with coin and insert a new lithium battery properly (CR1620 or CR1616) with the (+) pole upward (fig.8), and close the cover securely.
* Please make sure to do the All Clear operation after replacing battery, and to set the unit again.

XS850 L,S TDM 900 XJ900 Seca
XJ900S Divesion XVS 950 V-Star
XV920 M/R Virago RS90 Snowmobile All Models FX 1000 Waverunner FZR1000RA (EXUP) FZR1000 FZ1/FZS1000 Fazer FZ1/FZS1000 Fazer GTS 1000 RX10 Snowmobile All Models XV1000 Virago All Models YZF1000 (Thunderace)
VK10 Snowmobile All Models
BT 1100 Bulldog FX 1100 Waverunner VX1100 Waverunner XJ 1100 Maxim XJ 1100 J

10-79100 10-20300

10-28500 10-28500 10-79110 10-79100 10-79100 10-20300 10-20300 10-28500

YFUIW Prohauler

XV1100 Virago All Models XVS 1100 V-Star FJ 1200 XJR1200, SP
89-91 86-99 99-09 86-95 95-98 85-95 96-10

VMX12 V-Max

XVZ1200 Venture

FJR1300 All Models

83-85 01-10 07-09 96-09 88-93 97-00 86-93 99-08 99-04 05-09 04-10 06-10 08-10 07-10

10-28500

XVS1300 V-Star/ V-Star Tour XVX1300 Royal Star All Models
10-28410 10-82250 10-82220 10-82230 10-82222
XVZ13 DB, DBC, DE, T, DN, DS, DT, TC, DU, DUC XVZ13 Tour Classic XJR 1300 XVZ1300 Venture All Models XV1600 Road Star All Models MTO1 (Non US) XV1700 Road Star All Models XV 1900 Roadliner XV 1900 Raider (Flames) C
10-28500 10-28401 10-20300 10-82220 10-82230 10-82222
10-82220 10-82220 10-82220 10-82220 10-82220 10-82220
10-82230 10-82230 10-82230 10-82230 10-82230 10-82230
10-82222 10-82222 10-82222 10-82222 10-82222 10-82222
10-82232 10-82232 10-82232 10-82232 10-82232 10-82232
XV1900 Stratoliner all Models

RACE-PROVEN

Microglass Filters

HORSEPOWER IN A BOX!

EMGOS MICROGLASS OIL FILTERS STOP ALMOST 100%OF THE HARMFUL OUR SYNTHETIC MICROGLASS MEDIA TRAPS PARTICLES OVER 10 MICRONS IN SIZE AVAILABLE TO FIT A WIDE VARIETY OF APPLICATIONS INCLUDING HARLEY DAVIDSON, OUR RESEARCH AND TESTING IS DONE BY MOTORCYCLE PEOPLE AND RACERS, SUCH AS TEAM EMGO TAIWAN AND MANY OTHERS. ARCTIC CAT, HONDA, KAWASAKI, POLARIS, SUZUKI & YAMAHA. FILTRATION AND OIL FLOW. OUR DYNO TESTING HAS SHOWN A HORSEPOWER GAIN! DEAD IN THEIR TRACKS! WHILE OFFERING SUPERIOR REGULAR FILTER MEDIA TRAPS PARTICLES OVER 20 MICRONS IN SIZE. PARTICLES INSIDE YOUR ENGINE!

EN400 Vulcan EX400 Ninja KLE400 ZX400 EN450 LTD VN700 VN750
90-92 94-95 91-96 94-96 85-86-91, 93-98

KAWASAKI Contd.

VN750 Vulcan ZX750 (ZXR, ZX-7RR, R) ZX750H1 VN800 Drifter/Vulcan Vulcan Classic/LT VN900 Vulcan Custom VN900 ZX900 (ZX-9R) ZX10R Ninja ZX14 ZG 1400 Concourse Z/ZR1000 VN1500 Classic VN1600 Nomad VN1700 VN2000 Vulcan STX-15F
WATERCRAFT (KAWASAKI) FOR POLARIS
04-Sportsman Hawkeye 4X4, 2X325 Magnum, Trail Boss, Xpedition 2X4, 4X4 00-Trail Blazer Magnum 4X4, 2X4 03-Hawkeye 2X4, 4X330 ATP 04-Trail Boss 03-Sportsman 99-Sportsman 4X4 01-05 400L Xplorer 96-Xpedition 00-Magnum 6X6 96-Magnum 4X4 95-Magnum 2X4 96-Sportsman 06-Xplorer ATP HO 04-Magnum 00-Ranger 2X4, 4X4, EFI 06-Scrambler 96-Sportsman HO 00-Sportsman HO Mossy Oak Sportsman EFI 06-Sportsman 6X6 00-Sportsman X2 06-Sportsman Twin+10/2/3 04-Sportsman +2/Twin 07-Sportsman 05-Ranger RZR 08-09 07-09 91-94 04-06 90-94 92-98 00-06 00-08 03-05 06-09 99-05 94-07 99-08 04-08
99-03 91-95-02 06-09 07-08 94-01 07-10 06-10 08-10 07-10 07-08 07-08 07-10 07-09
Yamaha 3FV-13440-10/00 5GH-13440-00/10/20
ZXR250 KVF300 Prairie KLF 400 Bayou VN400 ZR400 ZXR400R KVF400 Prairie KAF450 Mule 1000 EX500 KLE 500 EN500 A1-B4 EN500 Vulcan Ltd ZZR500 ER500 KAF540 Mule 2010-30 EX500 (GPZ500) ZX600 (ZZR600) ZX600(ZX6-R) KLE650 Versys EX650 Ninja EX650 ER-6F,N LTV-V700F
YFM350 Wolverine Sport 2WD FZR250 YFM350Auto. Bruin Hunter FZR400RR XJR400 YFM400 Kodiak Auto YFM400 Big Bear ( All Models) YFM450 Kodiak Hunter4wd YXR450 Rhino/Auto YZF-R6 S YZF600 R6YZF/S FZ6600/ABS/Fazer

YAMAHA Contd next page

10-82230 10-82222 10-82232

FZR600 FZR600 Euro.

XJS600S SECA II

91-99 94-95 92-99

XJ600 Diversion XS600 YZF600 Thundercat YFM660 Grizzly/4X4 Auto YFM660 Grizzly 4X4 Wetlands/ Limited YXR660 Rhino FXR750 OWO1 YZF750R, SP YZFR7 OWO2 XJ900 Diversion FZ1 FZS1000 Fazer FZR1000 GTS1000
92-03 92,95 95-07 02-04-06 90-92 93-98 99-01 94-03 01-05 91-94 93-00
YZF1000 (Thunderace) YZF-R1 V-MAX XVZ1300AH Royal Star All Models XV1600 Road Star All Models XV1700 Warrior, All Models XV1700Road Star All Models XV1900 All Models MTO1 (Non US)

96-02 98-06 96-10 96-08

WATERCRAFT
FX1000 Waverunner FX1100 Waverunner VX1100 Waverunner RX10 Snowmobile
99-04 02-08 04-10 06-08 05-09 02-08 04-06 05-08 03-04

SNOWMOBILE

600 4x4/LE 650 V-2 Auto./LE 650 V-2 LE/TS
Artic Cat 3201044 Honda 15410-MCJ-003/00 15410-MF-JD01 Kawasaki 16097-0002/3 16096-1068 16097-1070/72 Triumph T1210444 Yamaha 5GH-13440-2000

12-94010

13780-00A00

13780-27A00 13780-45500 13780-49000 13780-49200

GSX1100E GS1150

82-87 84-86 92-93 93-95 93-98 96-99 97-00 88-89 88-93

12-94080

13780-17E00
GSX-R600 GSX-R750 GSX-R1100 GSF600S Bandit GSF1200S Bandit GSX600F Katana GSX1100F Katana GSXR600 GSXR750 GSXR1000 GSR 600 RF600 RF900
12-93746 12-93820 12-93710 12-93740 12-93770 12-94040 12-94086 12-94082 12-93830 12-93730
13780-48E00 13780-45C10 113780-31D00 13781-45010
VZ800 Front & Rear 98-03 VX800 (Rear) DR800 GS850 GLT/X/Z GS1000 G TL1000R 90-93 92-95 79-82 80-81 98-03
12-94060 12-94084 12-93742 12-94090 12-93842
13780-48B10 13780-19C00 13780-35fOO
01-03 01-03 01-03, 05-06 06-09 94-96 94-97
13780-44GOO 13780-36E00 13780-31FOO 13780-06GOO 13780-20C00 13780-04F00 13780-24B01 13780-38A00 13780-38A01 13780-38A50 13780-38A51 13780-20F00
13780-02FA0 13780-02F00 13780-06B00 13780-06300 13780-24F02 13780-10F00

12-93860 12-93890

GSF600/1200 Bandit 01-05 DL650 V-Strom DL1000 V-Strom GSX600F Katana GSX750 Katana XF650 Freewind LS650 Savage SV650 VS700 Intruder VS750 Intruder VS800 Intruder VS700 Intruder VS750 Intruder VS800 Intruder 04-06 02-07 89-04 88-03 97-02 86-05 86-87 88-91 92-06 99-03

TL1000S

97-00 86-88 86-88 99-07
GSXR1100E/H/J GSXR1100G/H/J GSXR1300 VL1500 Intruder
12-93780 12-93760 12-93762

Front Filter

12-93831 12-93832
12-94206 12-94200 12-94204 12-94210

Triumph

Center Mount w/ Filter Triumph 376/600 Series Element only Triumph 600/900 Series

Rear Filter

86-87 88-91 92-06
Offset Mount w/ Filter Triumph 900 Series 60-and UP Twins

Yamaha

12-95510

12-95570

3BN-14451-00 4XM-14451-00
DT125 YZ125 YZ250 YZ400F YZ426F YZ450
91-00 93-04 97-09 99-00 01-02 03-09 73-79 78-79
12-94400 12-94384 12-95820 12-95826 12-95824 12-94480

4H7-14451-00

20-26311 20-26325 20-26331 20-26341

Right Hand

20-26312 20-26326 20-26332 20-26342

Left Hand

B. D. C.

Mirrors for Honda

Available OE style or with Chevron Deco lights. Chrome or Carbon finish. 10mm screw in. point of sale display packaged. Replaces Honda OEM: R/H 88210-MBZ-KOO L/H 88220-MBZ-KOO Fits: Shadow 125, CBF500/600F/600N/600 CB400/750/1300F, Hornet 250, CB600 Hornet A. B. C. D.
Replacement Mirror for CBR1000RR 08-09
20-37361 20-37363 20-37365 20-37367
Left Hand 20-37362 Chrome w/o light 20-37364 Carbon w/o light 20-37366 Chrome w/light 20-37368 Carbon w/light
Available in Matte Black or Carbon finish. Fits Honda CBR 1000RR 08-09 Replaces OEM 88110-MFL-003(R), 88120-MFL-003(L). Comes in point of sale slide pack R L Black 20-35261 20-35262 Carbon

20-35263

20-35264

MIRR ORS FOR HONDA

Replacement Mirror for VFR 800 2000-2001 Replacement Mirror for VFR 800 2002-2009 Replacement Mirror for VTR1000 1998-2005
Available in Matte Black or Carbon finish. Fits Honda VFR 800 2000-2001 Replaces OEM 88110-MBG-D01(R), 88120-MBG-D01(L). Comes in point of sale slide pack R L Black 20-37341 20-37342 Carbon

20-37343

20-37344
Available in Matte Black or Carbon finish. Fits Honda VFR 800 2002-2008 Replaces OEM 88110-MCW-D01(R), 88120-MCW-D01(L). Comes in point of sale slide pack R L 20-37351 20-37352 Black Carbon
Replacement Mirror for CBF600S 2004-2006
Each mirror in a point of sale slide pack Both available in Black or Carbon Finish
CBR600F4/RC-51 Replacement Mirrors Available in Standard and with Amber Safety Lights.

20-37353

20-37354
Available in Matte Black or Carbon finish. VTR1000 1998-2005 Replaces OEM 88110-MBB-000(R), 88120-MBB-003(L). Comes in point of sale slide pack R L 20-35251 20-35252 Black Carbon

20-35253

20-35254

PHOTO NOT AVAILABLE

Available in Matte Black and Carbon Finish. Fits Honda CBF 600S 2004-2006 NON US MODEL Replaces OEM 88110-MER-D00(R), 88120-MER-D00(L). Comes in point of sale slide pack R L Black 20-37311 20-37312 Carbon

20-37313

20-37314
Replaces OEM 88110-MBW-023(R) 88120-MBW-013(L) STANDARD MIRROR Black OEM Carbon Right 20-87021 20-87023 Left
Fits: CBR600F4 99-06, RVT1000 00-06

20-87022

20-87024
WITH AMBER SAFETY LIGHTS Black OEM Carbon Right 20-87025 20-87027 Left

20-87026

20-87028

CB400SB Super Bol Dor

Not a U.S. Model

CB1300SB Super Bol Dor

Replacement Mirror for CBR600RR-AC/A CBR1000RR-A
Fits: 05 CB400SB Replaces OEM 88110-MCE-7900 (R) 88120-MCE-7900 (L). Sold one per Black Only Left 20-30602 Right 20-30601
Fits: 05 CB1300SB Replaces OEM 88110-MEJ-J000 (R) 88120-MEJ-7900 (L) Sold one per Black Only Right 20-30691 Left 20-30692

mounting studs RH common mount and Yam RH 20-34864A Chrome split stem LH 10mm Models LH

Maltese Cross Mirrors

Universal Application single function amber LED running light
20-34865A R/L Harley 20-34866A R/L Yamaha

Universal

Die-Cast Scrolled Mirror

Universal Replicas

Fits almost any motorcycle (except Yamaha) Comes with both 8mm & 10mm Euro mounting bracket. Slide pack two per 20-30650 Fits LH or RH
Fits right or left side. 10mm thread mounting. Slide pack one per 20-21715 Scrolled no name brands

20-21750 Scrolled V-Twin

Replicas for late model Hondas. Fits any make or model with 10mm threads. Slide pack one per 20-30610 LH

20-30620 RH

Clamp-On Tinted Mirror Clamp-On Mirror Bar-End Mirror
Three clamp sizes in each box. Fits 3/4, 7/8 and 1 handlebars. Slide pack one per 20-stem

Chopper Mirrors

20-stem 20-stem
Two styles oval and classic Die-Cast or Stamped steel, Clamp-On. Slide pack one per 20-34812 Metal-Classic
Buffalo 3 Inch Custom Mirror
20-34822 Die-Cast-Classic 20-34832 Metal-Oval
Fits left or right, 7/8 handlebar, Black or Chrome. Slide pack one per 20-34000 Chrome

20-34010 Black

Buffalo Style Mirror

Billet Mirrors

2 styles, oval and classic. 2 x 4 1/2 dieCast or Stamped steel. Fits left or right side. Slide pack one per 20-34814 Steel 10mm Classic 20-34824 Die-Cast 10mm Classic 20-34834 Steel 10mm Oval
Chrome 3 inch die-cast body comes in Rail Back design. Fits left or right. Slide pack one per 20-06845 Fits RH and LH

20-06846 Yamaha RH only

Harley)
Chrome finish, 10mm mount for Japanese applications. Each have a 10mm stem on the left and right sides and come with a replaceable 10mm and stud for Yamaha right side. Slide pack one per 20-inch stem
3 Chrome Stamped Steel Mirrors (Black available for

20-inch stem

Universal oval billet mirrors. Each have a 10mm stem on the left and right sides and come with a replaceable 10mm and stud for Yamaha right side. Slide pack one per 20-26305 Short stem

20-26307 Long stem

20-stem with 3 size clamp 20-stem with 3 size clamp 20-06817 Bolt thru stem for Harley 20-06817B For Harley in black 20-06818 10mm screw-on stem 20-06819 Right hand stem for Yamaha
Matte Black finish, 10mm threads. Fits LH or RH. Slide pack one per 20-64551 LH & RH
20-64552 RH for MBK/Yamaha Booster
We now offer a wider range of Chrome Die-Cast mirrors for imported cruisers. The head design comes in 5 different styles. Each style comes with a 6 stem and a diamond shape on the back of each head. They each have a 10mm stem on the left and right sides and come with a replaceable 10mm and stud for Yamaha right side. Slide pack one per 20-26343 RH 20-26344 LH 20-26333 RH 20-26334 LH

GOGGLES , REPLA CEMENT LENS
Roadhawk One-Piece Bandito Classic Split Lens
Durable, affordable 1-piece Goggles with Anti-Fog Lenses. Black 76-50140 Description Leather 76-50142 Chrome

76-50110

Young Rider Goggles & Replacement Lenses
76-50150 76-50151 76-50152 76-50153

Goggles

Americas Biker goggles. Anti-fog, easy to change replacement lenses in your choice of 4 color tints. Description Clear Blue Amber Smoke 76-50160 76-50161 76-50162 76-50163

76-50150

Lens Sets
With UV400 eye protection, adjustable strap. Description Leather Vinyl

76-50122

76-50120 76-50100

76-50122 76-50101

Available Now. Yamaha Blue
2-Piece Mask 76-49501 76-49502 76-49503 76-49504 76-49505 76-49506
76-49570 Clear Lens 76-49571 SmokeLens

Replaceable Lenses

White Black Blue Red Yellow Green Yamaha Blue
76-49551 76-49552 76-49553 76-49554 76-49555 76-49556 76-49557
Good looking, correct fit for riders requiring a smaller size goggle. Excellent for younger aged riders.

76-49575 Clear Lens

76-49576 Smoke Lens
EMGO # 76-49580 76-49581 76-49582 76-49583 76-49584 76-49585 76-49586 76-49587
Description Pur ple W hite Black Blue Red Yellow Green Yamaha Blue

A CCESSORIES , L OCKS

Disc Locks
Our Disc Locks have a 5mm pin and are available in two lengths: 100mm or 72mm. They feature a round key for added security and a simple mounting kit that can be attached somewhere out of the way on just about any motorcycle. The smaller pin diameter will fit Harley-Davidson Rotors! Each lock includes a bright yellow warning label to remind riders to remove before operation. EMGO # 81-95465 81-95466 81-95468 Red Black Chrome Description 81-95414 81-95416 81-95418
These red disc locks are available in two lengths: 95mm or 72mm. They feature a round key for added security. Each lock includes a bright yellow warning label to remind riders to remove before operation. EMGO # Description

81-95411 81-95451

72mm/Slot 6mm x 45mm 95mm/ Slot 8mm x

Shackle Locks

U Locks
Security Cable/ Lock Sets
This heat treated steel lock resists files, saws, or bolt cutters. Vinyl covered to prevent scratching and comes complete with high security tubular keys. Available in two sizes. EMGO # Description 81-95482 81-95483 110mm x 270mm 133mm x 343mm
A laminated slot lock with a 10mm diameter hardened U-rod. Vinyl covered to prevent scratching. EMGO # Description

81-95401

81-95490

100mm x 340mm

Header Pipe Bracket (Chrome) Replaces OEM 70-6857 Muffler Bracket (Black) Rplcs OEM 70-4951

10pcs each per Bag

80-78912
These Muffler Insert Silencers come complete w/ Mounting Bolt and Nut 80-78912 1-1/2 (38mm) x 4 long 80-78921 1-1/2 (38mm) x 8 long 80-78934 1-3/4 (44mm) x 4 long 80-78943 1-3/4 (44mm) x 8 long The 4 long inserts are the most popular

Exhaust System Reducers

Cut your Muffler inventory with our Insert Reducers. This three piece sleve kit reduces 1 3/4 to 1 1/2

80-47310

Universal Chrome Brackets

Chrome Exhaust Clamps

"A" Straight 6" Stem

Heat Shields

80-03200
Chrome Plated Bracket to Mount Muffler. Available in 2 types 80-w/ Pre-Drilled hole at one end and other end blank 80-same as above 80-same as above 80-with six Pre-Drilled holes 80-with six Pre-Drilled holes
1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 3"

80-62320 80-62321

"B" Short Clamp
80-62322 80-62323 80-62324

80-03201

Exhaust Clamps for Triumph
80-62342 80-62343 80-62344 80-62372

80-62340 80-62341

Heat Shield-Chrome available in 7 short or 12 long. These left protectors will help keep boots/pants from melting on your chrome exhaust pipes. Complete with mounting hardware.Fits: 1-1/2 to 2 OD pipes 80-80-long 80-long
EMGO # 1. 80-62390 1. 80-62391 2. 80-62397 3. 80-62398
Description/Fits 1-5/8", T90, T100 1-3/4", T120 Clamp Bolt
New Aluminum Exhaust Ring. For mid 1972 and up 650s

80-62393

Hemispherical Washer OE# 70-8860
Replaces OE# 70-4947 OE# 70-4501 OE# 70-0409

MAKE HONDA

EMGO # 13-87801
OEM REFERENCE 18291-216-00 18291-MN5-650
Gaskets are sold in 10 pcs per bag
NJ50M/D TC50 CB100 CL100 SL100 XL100 CG100 ATC125 CB125 CB125T CT125 NX125 TL125S TRX125 XL125 XL125S CRF150F ATC125S CM185T XL185S XR185 ATC200 CM200T TLR200 TR200 TRX200 XL200 XR200 FTR223 CRF230F SL230 XR230 CA250 CB250 CB250F CBR250RR CD250U CL250SC CMX250 CMX250C GB250 NAS250 TRX250 XL250R XR250R TRX350 XL/XR350 CB400SS CL400 RVF400R TRX400EX VFR400R XR400/R GB500 VF500C VF500F XL500S FITTINGS 99-04 99-04 70-73 72-74 70-73 76-78 77-79 86-87 76-77 88-87-88 76-78 76-85 03-09 81-79-81-87 80-82 86-88 86-87 84--97 83-84 81-02 00-05 03-09 97-90, 92 91-95 96-96-06 85-09 90, 93, 01-06 82-83 81-82 87-89 83-85 02, 04, 94 99-05 86-92 96-05 89-90 84-85 84-86 79-81 YEARS

MAKE HONDA EMGO # 13-87801

EXHAUST GASKETS

XR500/R CB550 CB550F XL600R XR600R NX650 XR650L/R VF700 VFR700F2 RVF750R VF750C VF750F VF750S VFR750F/R VFR800 GL1500/A GL1800/A NRX1800 FITTINGS ATC250 CM250 TRX250/X VT250C VT250F VTR250 VTR250 TRX300 TRX300EX TRX300FW TRX350FE/M TRX350TE/M CB400 CB400A CB400II/III CB400SF CB400T CB400C/E/T FJS400 NT400 NV400C TRX400F CB450 CM450 CMX450C TRX450E/F/S TRX500F VT500C/FT

FITTINGS

79-76-77 83-87 85-00 88-89 93-06 84-87 86-82-83, 88 83-84 82-83 86-97 98-05 ALL 01-YEARS 85-85-92 96-88-90 98, 00, 03 88-00 93-05 88, 90-00 00-06 00-06 99-02 78-81 94-97 99-04 79-81 79-81 03-05 88-90 92-01 95-06 82-86 82-83 86-87 98-04 01-09 83-86

EMGO # 13-87802

OEM REFERENCE 18291-236-000 18291-MN4-920
NOTICE: These Exhaust Gaskets are non-asbestos.
FITTINGS YEARS 83-04 87-02 03-96 01-05 02-09 88-06 89-90 79-82 80-85 88-94-03 01-07 93-99 84-86 91-02 83-86 02-09 VT500C/FT CB550SC CB600F CBR600F CBR600RR CBR600SE CBR600SJR FJS600A/D FSC600 VT600C/D XL600V CB650 CB650C/SC NT650 NSA700 VF750C/CD CB900F CBR900RR VF1000F/R ST1100 VF1100C/S ST1300/A
MAKE HONDA EMGO # 13-87805
OEM REFERENCE 18291-254-000 18291-286-000 18291-MM5-860

13-87811

18291-MM8-880
CB900C/F CBR900RR CBR945RR CB1000 CBR1000RR CB11000C CBR1000F CB1100F CBR1100XX GL1200 CB1300DC/F XL350/K1 CB500 VT700C VT750C PC800 VT800C VTR1000F VT1100C2/3 VTX1300C/R VTX1800R/S KV75 KD80 KD100 KM100 BN125 KLT160 KLF185 KLT200 KZ200 Z200 KLF220 BJ250 EL250 EX250 KL250 KLE250 KLF250 KLT250 KLX250 KZ250 KEF300 KLF300 KVF300 EX305 KZ305 KZ305 KLF400 KVF400 Z400 ZL400 ZR400 ZX400 KZ550 Z550 ZR550 ZX550 ZL600 ZX600 KZ650E,F,H Z650 ZN700 KZ750H,L,N ZR750C,D,F ZX750A,E KZ1300A,B
81-82 00-01 02-08-09 83, 94-95 87-97-04 86-87 97-05 75-78 75-78 84-94-98, 89-03-05 95-06 03-06 02-05 76-80 75-81 76-79 76-81 00-85-88 81-84 78-88-02 96-05 88-92 90-04 78-84 93-94 03-09 82-85 79-80 81-83 95-03 88-05 99-81-82 82, 87-88 93-99 99-88-95 91-05 91-95, 99 81-83 81-91 90-93 84-86 86-97 85-97 80-84-85 80-83 82-05 79-85 79-88

66-84184

66-84181
4.5 Bullet shaped bottom mount headlamp. Hooded rim. Clear lens with diamond cut reflector 12V 60/55W H4 bulb

66-84196

Aris Replica Headlight
Popular back in the late 60s to early 70s this new replica now has a reflector and a 60/65 Halogen bulb

66-84164

Good looking chrome plated steel body lights with slotted side design for that custom look. Available in 3 sizes A. 66-65082 6.5 headlight with H4 60/55 watt P43T halogen bulb (48-67700 B. 66-84142 5.75 headlight with H4 60/55 watt P43T halogen bulb (48-67700) C. 66-84192 4.5 spotlight with Hwatt halogen bulb (48-67730)

Buffalo Lights

7 Replacement Headlights
6-1/4 Replacement Headlights
These Good Looking, inexpensive replacement headlight units are available in Chrome or Gloss Black w/ Chrome rims. 6-1/2 between fork ears mounting holes. Replacement H4 bulb: 48-67700 Standard bulb: 48-65802 Chrome: 66-64310 w/ Quartz unit no bulb 66-64312 w/ Quartz unit plus H4 bulb 66-64314 w/ Standard bulb/glass Light Unit: 66-64313 Quartz use w/ H4 bulb 66-64343 Standard bulb
3 Good Looking Finishes! Matte Black, Chrome, & Carbon

Finish Black

Universal Fit 66-65040 66-65010
Our 7 headlight is available in 2 styles and 3 finishes. Each unit comes w/ Rim and Retainer so you only have to add the light unit. Our universal mount has 13.5mm side mounting holes, while our Kawasaki style mount has OE oblong side mounting holes. Replaces Kawasaki OEM# 230051016/23006-038
Kawasaki Fit 66-65042 66-65012

Chrome Carbon

66-65050

66-65052

New Black Shell

41/2 Buffalo Headlight

4.5 Headlight with H4 60/65 Halogen Bulb
66-64313 w/h4 bulb 66-64315 Standard bulb

5-3/4 Chrome Headlights

60/55 High low H4 halogen bulb. Clear Lens, Diamond cut reflector bottom mount.

66-84194

Universal application 4.5 headlight, bottom mount with H4 60/55 watt halogen bulb. 16 wire lead and high beam indicator

Rplcs. OEM: 33702-MBB-671 Kawasaki ZX12R 00-05

62-84750

62-84751

62-84752

Rplcs. OEM: 23025-1316

Rplcs. OEM: 23025-1301

Rplcs. OEM: 23025-1290

Rplcs. OEM: 23025-1246

Kawasaki ZX750 96-03 ZX1100 95-96

62-84753

Suzuki GSXR600 01-03 GSXR750 00-03 GSXR1000 01-02

62-84760

Suzuki GSXR1300R 99-07 GSXR600 98-06 GSXR750 98-06

62-84761

Rplcs. OEM: 35710-35F31 Suzuki SV650 99-02 TL1000R 98-03 TL1000S 97-01
Rplcs. OEM: 35710-24F30 Suzuki GSF600 Bandit 9699 GSF1200 Bandit 97-00
Suzuki GSX600 97-00 GSX750 96-99

62-84762

62-84763

62-84764

Rplcs. OEM: 35710-33E30

Rplcs. OEM: 35710-02F30

Rplcs. OEM: 35710-26E30
CL E A R TA IL L I GH TS WIT H RE D L IG HT B UL B S , R EP L A CE M E N T BU L BS

Yamaha FZ6/Fazer 03-08

62-84774

25 per case 62-84770

Yamaha FZ1 02-05 YZFR1 00-01
Rplcs. OEM: 5EB-84710-00 Yamaha YZFR6 99-00
Rplcs. OEM: 5JJ-84710-11 Yamaha YZF600 97-07 XVS650 98-06 XVS1100 99-06

62-84772

62-84773
Yamaha YZFR1 98-99 Rplcs. OEM: 4XV-84710-10

62-84771

Rplcs. OEM: 5EB-84710-00
L.E.D. Tail/Stoplight Bulbs

RE PL ACE ME NT BU LB S

Direct, Drop-in replacements for 12V 1157 or European P21/5W bulbs. Increase Brightness with these LED bulbs. depending on the bulb, check for enough space inside the light unit.
EMGO# A. 48-67741 B. 48-67742 C. 48-67744

D. 48-67745 48-67746

Description laser style strobe style smaller version of 48-67742 with a different light pattern bright clear led glow bright red led glow
The above bulbs, 48-67741/42/46, have a dancing light patter n. 48-67745/46 have a standard 2 filament light pattern, but with an extra bright led glow. Note: For off-road or show use only. not for highway use in USA. T h e s e b u l b s a r e N O T D. O. T. c e r t i f i e d. Check State Laws re gar ding the use of led replacement bulbs.

D. 113

RE PL AC EM EN T B U LB S
Bulb For Suzuki GSXR with turn signal/mirrors. Available in Clear and Amber. 48-68882 Clear Bulb 48-68882A Amber Bulb Replaces OEM: 0947-12186 Fits: GSXR600 06-07 GSXR750 06-07 GSXR1000 05-07 see below H7 Type Halogen Bulb

Replacement Bulbs

48-68882
Mirrors For GSXR Available in black or carbon finish

PX26D BASE

For more info on these mirrors and a complete line of GSXR mirrors, See our mirror section.
R L Black: 20-69791 20-69792 Carbon: 20-69793 20-69794
This bulb replaces Honda OEM# 34901MAT-611 and fits many 02 sport models plus GL1800A for 01-02. Also used on many 02 Suzukis and other brands.

EMGO# 48-67755 48-67756

Description H7 12V 55W H7 12V 100W

Base/Type PX26D PX26D

H4 Type Halogen Bulb

H3 Type Halogen Bulb

P43T BASE

P45T BASE

48-67700 H4 12V 60/55W P43T Base/Type 48-67701 H4 12V 100/90W P43T Base/Type 48-67710 + H4 12V 60/55W P45T Base/Type
Super Blue Tint Xenon Halogen 48-67705 H4 12V 60/55W P43T Base/Type += Special Orders Note: 48-67705/06 Blue Tint H4 bulb from Atlanta (USA) warehouse only
48-67706 H4 12V 100/90W P43T Base/Type

48-67705 48-67700

This commonly used bulb fits Cibie, Hella, and other rectangular headlights. Also used for many European motorcycles with rectangular headlights.

48-67730

H3 12V 55W

Base/Type

H1157 Type Halogen Bulb

Gas Filled Bulb

Wedge Bulb 13mm
H1157 - This halogen bulb replaces the standard USA#1157 offset pin tail/stop light bulb, also EMGO 48-66612 and Stanley# 4829A GAS FILLED, Special bulb for our 61-756 style mini winker lights.

EMGO# 48-67720

Description Base/Type H1157 12V 60/50W BAY15D
Note: 48-67720 Available from Atlanta (USA) w/h only

EMGO# 48-63524 48-63525

Description 12V 23W Clear 12V 23W Amber

Base/Type: BA9S

12V 21W for cateye flush mount lights 48-64222 Clear 48-64223 Amber
RE PL A CE ME NT BU LB S, TU RN S I GN AL S TE MS
Fig A B C D E F 48-66606 48-66612 48-66812 48-66412 48-66513 48-66712 48-66713 48-66724 48-66922 48-66806 48-66406 EMGO # USA # Stanley # 4527 62B 72A 4513 6V 20/5CP Offset Pin 12V 32/4CP Offset Pin 12V 32CP (25 Watts) 12V 3W 6V 3W 12V 21/6CP Double Filament 12V 23W Single Filament 12V 45/45W 6V 21CP (18 Watts) Description Taillight/stop Taillight/stop Intrument lights Application

Turn Signal

48-66512 48-66723 48-65812 48-66912
Amber Bulb Amber Bulb Amber Bulb Lucas# 303 Lucas# 302 Lucas# 360 -
12V 21/6CP Double Filament 12V Single filament 12V Single Filament 12V 23W Single Filament 12V 48/48W 12V 48/48W

Bullet/Marker light

Bullet/Marker light 66-81900 series lights Bullet/Marker light

Intrument lights

Bullet/Marker light 66-81900 series lights
Headlight, Right side traffic Headlight, Left side traffic 4.5" spotlights 66-84125/28 series lights
Headlight, for Honda ATV's

48-65902

48-66932
Replacement Early Turn Signal Stems
68-77925 Short 68-77940 Medium 68-77960 Long 68-77965 Short 68-77912 Long 68-77910 Long 68-77919 Honda GL 68-77930 Short 68-77995 Long 68-77968 Yamaha

48-65912

12V 45/35W Hooded Filament Headlight 12V 25/25W 12V 35W

Length

25mm 40mm 60mm 65mm 125mm 100mm 19mm 30mm 95mm 68mm

OEM Ref.

A B C D E F
90154-341-670 33607-323-670
23078-001 4X7-83328-00 5A8-83318-00
Replacement Early Turn Signal Stems contd. next page
R E PL AC E ME NT T U R N S IG N A L S T EM S, F U S ES

G H I J K L M N O

68-77900 68-77901 68-77902

Hon Hon Hon Hon Hon Hon

OEM Reference Fig. Post Application
33690-KR3-672 33692-KE7-000 33490-MK3-000 33490-MB1-003 G H I J K L Rr Fr Fr Fr Fr Rr Rr F/R Rr Fr Fr/Rr
68-77903 68-77904 68-77905
33690-MK3-000 33690-MB1-003 33691-MJO-003 33690-MB2-003
68-77908 Yam 68-77931 Kaw 68-77970 Suz
4G0-83318-00 23051-1165 35619-38A01
Inline Fuse Holder w/ 30 AMP Fuse

RE P LA CE ME NT F US ES

Snap In Blade Fuses
Load penning Time: 110% 4 hours 135% 0.75 to 1,800 seconds 200% 0.15 to 5 seconds 32V DC
Rebel 250/450 VF500F 84-86 CB550SC 83, CX650C 83, VF700C/S 84-86 VT700C 84-85, VF750C 82-83, VT750C 83 CB1000C 83, VF1100 83-86 VF700C 84, VT700C 84-85, VF750C 82-83 VT750C 83, VF750C 82-83, CB1000C 83 CB400F CBVF500F 84-86, VFR700F 86-87 VF1100S 84-85 CBR900RR 93, VF700F 84-85, VF750F 83-84 VF1000F 84, VF1000R 85-86, VFR750F90-92/F2 86-87 VFR750F 86, VFR 86, VFR750F 86, VFR750F 90-92 VFR750R 90 RC-30 Fr/Rr XZ550RK,XJ 550RH, RJ, RK Rr XJ650LJ, LK, XJ750 Fr/Rr FJ1100L, LCN, NC, XJ900RK Rr EX250 86-87, EX500 90-96, ZX600 85-96 ZR750 00-01, ZG1000 86-00 Fr VS750GLPJ/FJGLPK GLPL GLPM, VS800GLN

Max Blade

48-05057 48-05058 48-05050 48-05051 48-05052 48-05053 48-05054 48-05055 48-05056
3A 4A 5A 7.5A 10A 15A 20A 25A 30A

48-93321

Violet Pink Tan Brown Red Blue Yellow Clear Green

Mini Blade

48-05067 48-05068 48-05060 48-05061 48-05062 48-05063 48-05064 48-05065 48-05066
Max= 80s style Big size Mini= 90s + Smaller size as used on current Motorcycle models
TU BE TY P E F US ES , I N- L I NE FU SE HO LD ER UN I VE R SA L H OR NS
Universal inline fuse holder Early Harley Style Electric Horn

Universal Horns

Universal 12V Horn w/ Snap-On Cover
Univer sal in-line fuse holder for tube type fuses. Includes 16 gauge wire and a 20 amp fuse.
Available in 2 sizes, Chrome face w/ dual hole mount. Large size (135mm) replaces HAR OEM# 69001-42. Small size (120mm) Replaces HAR OEM: 69005-85T 6Volt 86-87216 Large

86-87226 Small

40-80642
Replaces Kawasaki OEM: 27005-1180 Fits: ZX6 93-00
Replaces Kawasaki OEM: 27005-1103 Fits: KMX125

40-80644

40-71082
Replaces Kawasaki OEM: 27005-094 Fits: Z200/250, Z400

40-71010

Replaces Kawasaki OEM: 27005-1071 Fits: GPZ305, ER250 B1/B2
Replaces Suzuki OEM: 37100-46E21, 37100-33E01, 37100-33E20 Fits: GZ250 99-01, GSF600 Bandit 96-99, GSF1200 Bandit 97-05, GSX600/750 Katana 98-03, GSXR600 97-00, GSXR 750 93-99, GSXR1100 95-98, TL1000R 98-03, TL1000S 97-01
Replaces Suzuki OEM: 27005-1071 Fits: GS450 '80-'82, GS650 '78-82, GS750 '78-'81, GS850 '79-'80, GS1000 '79-'80, GS1100 '80

40-71030

40-71060

40-71066

Replaces Suzuki OEM: 37110-28655 Fits: GP100/125, GT200 X5, GT250 X7, SP370, GT500 Replaces Suzuki OEM: 37100-17C02 Fits: GSF400 Bandit 91-92, GS500 89-92, GSX600F Katana 88-91, GSX750R 89-92, GSXR750G 86-92, GSXR1100 86-92, GSX1100F Katana 88-92, RF600R 94-96, RF900R 94-97, VX800 91-93 Replaces Suzuki OEM: 37110-13611 Fits: TS50X
Photos Not Available for the Following Numbers

40-71000

Replaces Suzuki OEM: 37110-25318 Fits: All TC/TS models '73-'79, SP models '78-'83
Y AM AH A I G NI T I ON S WI T CH E S
40-71340 40-71360* 40-71410
Replaces Yamaha OEM: 3JV-82501-00-00 Fits: SRX250 '87, XV500 '83, XJ550/R '81'83, FJ600 '84-'85, FZ600 '86-'88, XJ650 '80-'83, XJ650LH/RJ '81-'82, XZ650M '78'83, GZ700 '87, FZ750 '85-'86, FZR750 '87'88, XJ750/M '83, XS750S '78-'79, XV750/M '81-'83, XS850 '80-'81, XJ900R '83, XV920R '81-'82, FZR1000 '87-'93, FJ1100 '84-'85, FJ1200 '86-'89, FZR600 89-99, XJ600 92-96
Replaces Yamaha OEM: 3Y6/41Y-82501-81 & 2K1-8258-80. Fits: XS250C/400 DOHC, XJ550/XJ600 '84'85, FZ600 '87-'88, XJ650, XS650SE, XV750SE, Z750 '85-'88, XJ900, FJ1100, XS-XV 1100, FJ1200 *European Models

40-71436

40-71450
Replaces Yamaha OEM: 5Y3-82508-80 Fits: XT250, 500, 550, 600

40-71460

Replaces Yamaha OEM: 34Y-82501-00 Fits: DT 125LCMK3, XT350 '85-'86
Replaces Yamaha OEM: 2A6-82508-80 Fits: DT125/175MX

40-71470

40-71456 40-71462
Replaces Yamaha OEM: 3VL-H2121-11 Fits: RX100 Replaces Yamaha OEM: 5R2-82501-00 Fits: XT250L, LC, XT350N, NC, S, SC