GAS BOILERS

HEATING AND INSTANT HOT WATER

Elexia Comfort

w w w. c h a f f o t e a u x - m a u r y. c o m
Comfort, simplicity and performance
Elexia the instant solution
The Elexia comfort range has been designed to respond to modern household demands at the flick of a switch.
Hot water for the bathroom
The Elexia comfort heats water instantaneously, to provide a limitless supply of hot water around the home. With no need for header tanks or hot water cylinders it saves energy and permits an easy installation.

Heating around the home

Full electronic control provides a stable temperature output for heating systems. Clear controls make it easy to maintain the perfect temperature. From installation to daily use, the Elexia comfort range has been developed to make life easier: - Easy to use temperature controls for both heating and hot water give precise adjustment at the owners finger tips. - Optional room thermostats have been chosen for clarity and adjustability.

The Intelligent solution

An on-board computer and state of the art controls protect the owner, the system and boiler from harm. The Elexia comfort constantly monitors its own systems to warn of component failure or problems in the system such as blockages. The computer also works to protect the boiler from frost damage and the pump from seizing during the summer months. Should a fault occur, the unit indicates the type of failure, helping the service engineer to fix the problem quickly.

Designed for simplicity

Simple to install
The Elexia comfort comes factory set ready for installation, with many features to assist the heating engineer and save time and money on site. A complete package includes pre-installation jig, copper tails, power fly lead, easy fit flue and optional pipework changeover kits and simple plug-in time clock. The Elexia comfort can be used with 5 flue options, providing flexibility in choice of location. Pipework can be run up behind the boiler without the need for a separate spacer kit, allowing pipes to be hidden from view. All components can be reached from the front of the unit for maintenance, allowing the unit to be easily installed between kitchen cabinets. As no compartment ventilation is required the Elexia comfort is also perfect for locating inside cupboards.

Maximum reliability

The key areas of the boiler have been designed to provide maximum reliability. With fewer moving parts and no restrictions in waterways, reduced stress on key components ensures an extended working life. Advanced composites are used to construct key areas of the boiler, to avoid joints and allow for a compact design.
Model FF with full modulating valve

1 - Exhaust fan

2 - Main heat exchanger covered by aluminium paint 3 - Overheat sensor
4 - Multigas burner equipped with a flame supervision device 5 - Manifold with injectors
6 - Gas section equipped with modulating valve
7 - Electrical adjustments rubber cap 8 - Easy opening electrical box 9 - Pump with air separator 10 - Water pressure switch
11 - Hydraulic assembly including the change over valve 12 - Combustion chamber

13 - Air pressure switch

Technical specification

Model* Ignition Heating output Domestic hot water output Sedbuk rating Efficiency Net C.V. DHW flow rate (T = 30K) Central heating maximum temperature DHW maximum temperature range Gas type UFT weight 7.75 kW to 20 kW 20 kW B 500 90% 9.6 l/min 85C 40-60C 34 kg Elexia 20 CF Elexia Elexia Elexia Comfort Comfort Comfort 24 CF 24 FF 28 CF Electronic Ignition (with flame detection electrode) 9.5 kW 7.75 kW 7.75 kW 7.75 kW to 20 kW to 24 kW to 24 kW to 26.5 kW 20 kW 24 kW 24 kW 26,5 kW B 300 B 500 B 300 B 500 90% 90% 90% 90% 9.6 l/min 11.4 l/min 11.4 l/min 13.4 l/min 85C 85C 85C 85C 40-60C 40-60C 40-60C 40-60C Natural Gas / LPG 45 kg 34 kg 45 kg 34 kg Elexia 20 FF Extraction type CF : open flue FF : fanned flue Elexia Comfort 28 FF 7.75 kW to 28 kW 28 kW B 300 90% 13.4 l/min 85C 40-60C 45 kg
* Model Elexia : two steps modulating gas valve Elexia comfort : full modulating gas valve*

Connections

Tails provided I J K L M N Safety valve outlet Heating flow (3/4" M) Hot water outlet (3/4" M) Gas supply (3/4" M) Mains water supply (3/4" M) Heating return (3/4" M) 18x20 14x16 18x20 14x16 18x20

FF Version

CF Version

245 67

232 L JK MN

850 721

235 232

L JKMN

380 valve axle 88

380 valve axle

J K L M N
CHAFFOTEAUX & MAURY S.A.S.
47, rue Aristide Briand 92532 Levallois-Perret CEDEX Tel: +Fax Export Area: +80 04
Conception/ralisation : Eurographics +- Rf. : 92710179 11/03 Chaffoteaux & Maury reserves the right to change specification without prior notice
1.80 m mini from the floor