Motor Lifts / Trim Tabs

To Order Call: 204-222-3782 ~ Toll Free: 888-376-7359 ~ Fax: 204-224-2826

Motor Lifts

Integral Trim and Tilt - 55-0025
The Panther Integral Trim and Tilt is designed for use with Johnson and Evinrude, 20HP to 35HP two-stroke outboard motors, made since 1976. Made to provide trim and tilt features on motors that dont have factory trim and tilt. In a matter of minutes the Panther Integral Trim and Tilt fastens directly to your existing motor bracket without modication. The Panther Integral Trim and Tilt offers a patent-pending break-away safety feature, that releases the motor in the event of striking a log or any underwater stationary object.

Model 35 - 55-0035

The heavy-duty bracket easily handles auxiliary outboards up to 35hp or 150 pounds. Kicker motors are supported in any position with this durable design. In addition to its ruggedness, the Model 35 is the only kicker motor lift with a convertible setback. This unit can be adjusted from 7 to 13 inches of setback, making it ideal for inboards, I/Os, jet-drives, and outboards when over the transom mounting is unavailable.

(7 Setback)

Model 35 LE - 55-0350
(for use with Rangers and Lund Pro V) The Auxiliary Motor Lift 35LE is the same rugged design as the powerful Model 35. The specially designed transom plate is made to t the contoured transom of Ranger and Lund Pro V boats.

(13 Setback)

Manual Version of Model 35 - 55-0435
This xed Motor Bracket is designed for those who prefer to use their own strength to lift up their motors. It comes with the adjustable 13 setback feature and is made of 713-alloy aluminum.
Trim and Tilt - Model 40 - 550040
This trim and tilt is designed specically for the weekend sherman. The Model 40 is a heavy duty fabricated aluminum bracket. It will hold 2 and 4 strokes motors up to 150lbs. Its powerful electro-mechanical actuator provides automatic trim and tilt with the push of a button. Bracket comes with electrical relay and 2 button switch (12ft cord). 8 setback - weighs 21lbs

55-0040

Outboard Motor Bracket SS Max 10hp - 55-0010
The Adjustable Outboard Motor Bracket is designed for motors up to 10hp or 80lbs max weight and is constructed of stainless steel. Manual operation means no power required to raise and lower your auxiliary outboard motor. Unit is spring loaded.
Outboard Motor Bracket SS Max 20hp - 55-0020
This adjustable outboard motor bracket is designed for motors up to 20hp or 115lbs. It has the same stainless steel construction as the 10hp model. Unit is spring loaded.

55-0020

Outboard Motor Bracket Aluminum Max 20hp - 55-0021
Similar to the 55-0020, this adjustable outboard motor bracket is also designed for motors up to 20hp or 115 lbs. Its heavy duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats. Unit is spring loaded.

55-0021

Outboard Motor Bracket Aluminum 10hp - 55-0022
Same design as the 55-0021, this heavy duty, lightweight aluminum bracket is designed for motors up to 10hp or 80lbs. Unit is not spring loaded.
Transom Adapter - 55-0023
For use with the 55-0021 and 55-0022, this adapter plate allows you to easily install and remove your outboard motor bracket within seconds. Solid construction makes sure your motor is as secure to your boat as if it were bolted directly. *Features hole for padlock.boat manufacturers.

55-0023

Static Motor Mount Plate - 55-0405
If trolling motors are your thing then our static plate is a must. It offers a sturdy and at mounting area for your trolling motor clamps. When direct to transom motor mounting is difcult, Panthers Static Motor Mount Plate provides a at secure mounting surface for clamp-on or bolt-on kicker motors up to 40hp or 150lbs.

55-0405

Trim and Tilts

Model 55 - 55-0055

The compact Trim and Tilt Model 55 conveniently matches outboards from 15 to 55hp, weighing up to 250lbs. Perfectly designed for pontoons, shing or pleasure boats. Adapts to clamp on or bolt-through outboards.

55-0055

Model 135 - 55-0135
This heavy-duty bracket is designed for outboards up to 135hp or 350 lbs.

Jack Plates

Model 250 Manual Jack Plate - 55-0250
For easy adjustment, a stainless steel threaded rod moves the whole unit to maximize the boat and motors optimum performance levels. The Manual Jack Plate adapts to any transom conguration for easy installation. The Model 55-0250 features a 6 setback. The Model 55-0251 features a 10 setback. The Model 55-0252 features a 12 setback.
Model 300 Dual Action Jack Lift - 55-0300
The Panther Dual Action Jack Lift Model 300 provides up to 10 of prop travel, 5-1/2 of vertical lift, seven degrees of tuck in the lowest position and features 8 inches of outboard setback for improved handling. Designed for outboards up to 300hp or 550lbs, the powerful electro-mechanical actuator responds immediately to the push button switch.
6 Powered Jack Plate - 55-0450
Designed for outboards up to 550 lbs, the powerful electromechanical actuator responds immediately to the push button switch. The Jack Lift is constructed of 713-cast aluminum. It has 5-1/2 of vertical lift on aircraft reinforced guide bars. A 6-inch setback meets restrictions on setback distance provided by many boat manufacturers.
Set Back Brackets and Wedge Plate
2 Setback Plate - 55-0220
This cast aluminum spacer provides two inches of setback for bolt-on motors. This solid spacer installs directly to the transom, or adds additional setback to an existing jack plate. A standard BIA bolt pattern makes mounting a snap, but is drillable for non-standard patterns.

55-0220

4 Setback Plate - 55-0240
An innovative ared shape allows this four-inch setback bracket more transom contact area to reduce stress and improve the motors stability. The pre-drilled hole patterns allow for an extensive range of motor installations.

5 Degree Reversible Wedge Plate - 55-0420
The Reversible Wedge Plate provides ve degrees of trim or truck. Its one piece cast aluminum design provides a stable platform for the largest of todays outboards.

55-0240

Fixed Outboard Motor Bracket - 55-0026
Heavy duty carbon steel bracket is designed to hold 2 and 4 stroke motors weighing up to 150lbs. 10 1/2 setback - weighs 13.5lbs
Fixed Outboard Motor Bracket - 55-0027
Heavy duty aluminum bracket is designed to hold 2 and 4 stroke motors weighing up to 150lbs. In addition, the model 27 has a 5 height adjustment to accommodate short shaft motors. 8 1/2 setback - weighs 13lbs.

55-0420

55-0027

55-0026

Steering
Auxiliary Motor Steering Kit Zinc - 55-2400
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horsepower. The model 55-2400 is constructed of Zinc plated steel.
Auxiliary Motor Steering Kit Stainless- 55-2600
Same as the model 55-2400, however, this auxiliary motor steering kit is constructed of stainless steel.
Trolling Motor Tie Bar Kit - 55-2700
This Trolling Motor Tie Bar kit is constructed entirely of stainless steel. Included in the kit are a 1/2 thick tie rod bar and a drive bracket designed to attached directly to your motors SeaStar Hydraulic Steering. Simple to set up and very rugged, this kit will handle up to a 40hp kicker motor. * SeaStar Hydraulic Steering is a registered trademark of Teleex Canada Limited Partnership.
Drive Bracket Stainless - 55-2750
For those who would just like the rugged stainless steel drive bracket, Panther offers the 55-2750. Designed specically for use with SeaStar Hydraulic Steering. Can also be used with 55-2400 and 55-2600 Steering Kits. * SeaStar Hydraulic Steering is a registered trademark of Teleex Canada Limited Partnership.

55-2400

55-2700

55-2750

Electro Steer - 55-0100
Trolling made easySteer your kicker from anywhere in the boat. The Panther 100 Electro Steer is easy to install anywhere in the transom area. It operates the motor with the push of a button. The Electro Steer will move from full right to left in only 4 seconds, with fast, precision kicker control, necessary for contour trolling. The connecting rod between the Steer and the kicker easily disconnects, allowing versatile applications.

55-0101

Same great features as the model 100. Recommended for saltwater use.

55-0100

Panther T4 - Through Tilt Tube Electro Steer - Freshwater - 550102
24 cable allows you to steer your kicker motor from anywhere in the boat. Mounts to your kicker motor in minutes. Does not take up any space on your transom. Wireless Option now available!

Panther T4 - Through Tilt Tube Electro Steer -Saltwater - 550103
Miscellaneous Accessories

Lift Gauge - 55-1100

This unit will t all the Panther jack plates and trim and tilts, providing an accurate indication of the trim and tilt that is occurring. The 2 1/8 gauge matches most factory installation gauges. Will also work with many other lifts and plates other than Panther.
Pro Strap Kicker Tie Down - 55-1500

(used with Model 35)

The Panther Pro-Strap provides hands-free, heavy duty retention for the Model 35. As the engine is tilted, the strap tightens and secures the motor for extreme, rough water conditions. As the motor is lowered, the two inch diving belt strap stays secured and tucks to the side. Will t any auxiliary outboard with a Panther Model 35. Adjustable buckles and stainless clevis are included.
Push Button Trim Switch - 55-1200
12 feet of cable allows each user easy and custom installation of this remote push button switch. This splices into existing applications or can be plugged directly to any Panther product.
Wireless Remote Control - 550105
50 Ft Range Operates on 12v Battery Universal Design For all 2 bullet molded connectors Adapted for all Panther Steering and Trim & Tilt units Lanyard included
Model 3500 Model 5200 Model 5500
Model 3500 - 35 lb Thrust - 12V Model 5200 - 52 lb Thrust - 12V Model 5500 - 55 lb Thrust - 24V