Seite 129-160_2005_GB_o_PR

04.01.2005

12:43 Uhr

Seite 148

Torque Tools
HAZET Torque Tools high-precision tools up to the last detail

System 5000 CT

Accuracy 4% of scale value Accuracy 4% of scale value Safe torque value locking at handle Safe torque value locking at handle Exact precise scale graduation Exact precise scale graduation Individal serial number Individal serial number Ratchet with sliding square tang Ratchet with sliding square tang Tested with certificate Tested with certificate Ergonomic Ergonomic

System 6000 CT

Accuracy 2% of scale value Accuracy 2% of scale value Tested with certificate Tested with certificate Safe torque value locking at handle Safe torque value locking at handle Exact precise scale graduation Exact precise scale graduation Individal serial number Individal serial number Reversible ratchet Reversible ratchet Ergonomic Ergonomic Safety: Safety: Haptic (close-gap release) Haptic (close-gap release) Audible (click point) Audible (click point) Visible (signal transmitter, Visible (signal transmitter, depending on the Torque Wrench) depending on the Torque Wrench)
and who will be checking your HAZET Torque Wrench?
Examination and Calibration Service for HAZET Torque Wrenches
Our Examination and Calibration Service offers:
Good preconditions for functional Torque Wrenches Regular working quality, provable in the long term Indication of Torque Wrenches with examination badge Examination certificates indicating the test values
Component and Spare Parts see pages 161 to 170

Seite 149

Torque Wrenches SYSTEM 5000 CT Release accuracy 4%
SYSTEM 5000 CT Release accuracy tolerance 4% of scale value (in direction of actuation) Tightening at torque setting is possible both to the right and the left With automatic close-gap release, palpable and audible when torque setting is reached Turn handle to adjust the desired torque value easily and safely With lock at the handle Fine scale graduation With serial number and certificate Ratchet with sliding square tang (according to DIN 3120 A, ISO 1174-1 A) with plastic turn-knob for manual pre-tightening Reversible sliding square tang allows changement of direction of actuation DIN EN ISO 6789 DBGM German registered utility model, EP + = Safe Box available, to be ordered separately

5000 5000

5110-1 CT + 5121-1 CT + 5122-1 CT + 5123-1 CT
10,5 = 38 12,5 = 12 12,5 = 12 12,5 = 12
10- 60 20-120 40-200 60-320

498 615

022472 022588
Torque Wrenches Graduation Range 10 - 120 cNm 1 - 6 Nm 2 - 10 Nm 4 - 40 Nm 5 - 60 Nm 10 - 60 Nm 20 - 120 Nm Graduation e 1 cNm 6002 CT 0,1 Nm 0,2 Nm 0,4 Nm 0,5 Nm 0,5 Nm 1 Nm 6003 CT 6108-1 CT 6280-1 CT 6109-2 CT 6282-1 CT 5110-1 CT 6290-1 CT 6110-1 CT 6290-1 CT 5121-1 CT, 5121-2 CLT, 6111-1 CT, 6121-1 CT, 6191-2 CT, 6291-1 CT 5122-1 CT, 5122-2 CLT, 6122-1 CT, 6292-1 CT 5123-1 CT, 5123-2 CLT, 6123-1 CT, 6293-1 CT 6143-1 CT, 6294-1 CT 6144-1 CT, 6295-1 CT 6145-1 CT, 6296-1 CT
Torque Wrenches Graduation Range 5 - 40 lbf.ft Graduation e 0,5 lbf.ft 6114-1 CT 6115-1 CT 6127-1 CT 6128-1 CT 6123-1 CT
(6,8 - 54,2 Nm) (0,7 Nm) 20 - 100 lbf.ft 0,5 lbf.ft (27,1 -135,6 Nm) (0,7 Nm) 40 - 200 lbf.ft 1 lbf.ft (67,8 -339 Nm) (1,4 Nm) 50 - 250 lbf.ft 2 lbf.ft (67,8 - 339 Nm) (2,7 Nm) 120 - 600 lbf.ft 2 lbf.ft (162,7 - 813,5 Nm)(2,7 Nm)

40 - 200 Nm

Sliding square tang 10 = 38 for 5110-1 CT

60 - 320 Nm

5110-01 5121-01

049691 022410

Sliding square tang 12.5 = 12 for 5121-1 CT, 5122-1 CT 5123-1 CT
100 - 400 Nm 200 - 500 Nm 300 - 800 Nm

2,5 Nm 2,5 Nm 2,5 Nm

Torque Wrenches SYSTEM 5000 CLT Release accuracy 4%
Click-Lens-Type Large digits for exact and easy-to-read torque setting Easy and safe adjusting of the desired torque value Exact and easy reading of the torque value Triple-digit optomechanical value readout with large digits on the display Torque release palpable by close-gap release audible by click-sound Release accuracy 4% of the preset value Large, convex display (exchangeable) simplifies reading The desired torque value is adjusted easily and safely by turning the handle Reversible ratchet Ergonomically shaped handle Safety lock at the handle With serial number and certificate DBGM German registered utility model, EP

&!

5121-2 CLT 5122-2 CLT 5123-2 CLT 5128-2 CLT
12,5 = 2 12,5 = 12 12,5 = 12 12,5 = 12

20-120 40-200 60-320

lbf. ft.

660 660

104222 112296

50-250

Repair Sets see page 152

Seite 150

Dynamometric Screwdrivers SYSTEM 6000 CT Release accuracy 5%
Release accuracy tolerance 5% of scale value (in direction of actuation) For Screwdriver Bits with 6.3 = 14 outside hexagon drive Application of Sockets ( drive 6.3 = 14) in conjunction with Adapter HAZET 2304 Application on plastic screwed connections and connections on switch cabinets and model making

6002 CT 6003 CT

6,3 = 6,3 = 14

10-120

170 230

023004 023011

Torque Wrenches SYSTEM 6000 CT Release accuracy 2%
With automatic close-gap release, palpable, audible and visible when the torque setting is reached Easy and safe adjustment of the desired torque value by turning the handle Release accuracy tolerance 2% of scale value (in direction of actuation) For application on engines, gearboxes, machines, in industry and model making DIN EN ISO 6789 Square according to DIN 3120 A, ISO 1174-1 A

6108-1 CT 6109-2 CT

6,3 = 14 6,3 = 14

2-10 4-40

198 256

062218 080564

Release accuracy tolerance 2% of scale value (in direction of actuation) With reversible ratchet With turning knob for supplementary torque value locking DIN EN ISO 6789 Square drive according to DIN 3120 A, ISO 1174-1 A 6110-1 CT up to 6123-1 CT = German Patent + = in Safe Box o = without signal transmitter

6110-1 CT 6111-1 CT 6121-1 CT 6122-1 CT 6123-1 CT 6143-1 CT 6144-1 CT 6145-1 CT + + + + o o o
10,5 = 8 10,5 = 38 12,5 = 12 12,5 = 12 12,5 = 12 20,5 = 34 20,5 = 34 20,5 = 34
5- 60 20-120 20-120 40-200 60-320 100-400 200-500 300-800

1040 1280

025541 025565
Torque Wrenches SYSTEM 6000 CT
US-Standard Release accuracy 3%
According to US standards Scale graduation in lbf.ft Release accuracy tolerance 3% of scale value (in direction of actuation) With reversible ratchet With turning knob for additional torque value locking Square drive according to DIN 3120 A, ISO 1174-1 A + = in Safe Box o = without signal transmitter

GERMANY

Nm 270

6127-1

lbf.ft 36,9 44,3 51,6 59,0 66,4 73,8 81,1 88,5 95,9 103,3 110,6 118,0 125,4 132,8 140,1 147,5 154,9 162,3 169,6 177,0 184,4 191,8 199,1

lbf.ft

6114-1 CT 6115-1 CT + 6127-1 CT + 6128-1 CT 6132-1 CT o
10,5 = 38 10,5 = 38 12,5 = 12 12,5 = 12 20,5 = 34
6,8- 54,2 27,1-135,6 54,2-271,2 67,8-339 162,7-813,5

078455

5- 40 20-100 40-200 50-250 120-600

Seite 151

Torque Wrenches SYSTEM 6000 CT

6108 6296

Serien Nr. XXXXXXX
With plug-and-socket connection to accommodate insert tools Release accuracy tolerance in direction of actuation 2% of scale value DIN EN ISO 6789

6280-1 CT 6282-1 CT

9 x x 12

180 240

026005 080540
With plug-and-socket connection to accommodate insert tools Release accuracy tolerance in direction of actuation 2% of scale value DIN EN ISO 6789 + = in Safe Box
6290-1 CT 6291-2 CT 6291-1 CT 6292-1 CT 6293-1 CT + + + +

9 x x x x x 18

5- 60 20-120 20-120 40-200 60-320

026173

With plug-and-socket connection to accommodate insert tools Release accuracy tolerance in direction of actuation 2% of scale value DIN EN ISO 6789 Without signal transmitter
6294-1 CT 6295-1 CT 6296-1 CT

14 x x x 18

100 - - - 800

026210

Data for effective length
on Torque Wrenches with (different) Insert Tools l2 lw = Gauge dimension of adjusting device = Gauge dimension of extended insert tool (l1 + l2) x MDV l1 + lw
MDE = Torque to be selected MDV = Torque prescribed lj = Standard length adjustment with adjusting device l1 = Effective length of torque wrench
Dimensions of various HAZET Torque Wrenches:

6280-1 CT 6282-1 CT 6290-1 CT 6291-1 CT 6291-2 CT 6292-1 CT

320 440

Adjusted with HAZET-No.

6280-1 CT

19,5 19,38,38,5
6293-1 CT 6294-1 CT 6295-1 CT 6296-1 CT 6391-12 6391-25

85 130

6391- 35 6391- 50 6391- 85 6392-200 6392-320
6401-1 (S) 6401-1 (S) 6402-1 (S) 6404-1 (S) 6402-1 (S) 6404-1 (S)

6404-1 (S) 6406

Seite 152
Repair Sets for Torque Wrenches Repair Sets for Torque Wrenches
Repair Set for optical signal transmitter consisting of: red button, compression spring, black housing, pin, screw for 6021-1 CT, 6022-1 CT, 6023-1 CT, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT, 6121 CT, 6121-1 CT, 6122 CT, 6122-1 CT, 6123 CT, 6123-1 CT, 6127-1 CT, 6128-1 CT, 6191-2 CT, 6290-1 CT, 6291-1 CT, 6292-1 CT, 6293-1 CT

6122-29

025305
Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 6108-1 CT, 6109-1 CT, 6109-2 CT, 6401-1, 6401-1 S, 6408
Reversible ratchet with screw, complete (exchangeable): 20 = 34 until end of 2004 for 6132-1 CT, 6143 CT, 6143-1 CT, 6144 CT, 6144-1 CT, 6145 CT, 6145-1 CT, 6146-1 CT

6143-01 111176

111190

6401/5

Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 S, 8816 ST, 2264-1, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT, 6402-1, 6402-1 S, 6408-1
Reversible ratchet with pin, complete (exchangeable): 20 = 34 since 2005 for 6132-1 CT, 6144 CT, 6144-1 CT, 6145 CT, 6145-1 CT, 6146-1 CT

6145-01 042227

Torque insert lock with screw for 6243-1 CT, 6244-1 CT, 6245-1 CT, 6294-1 CT, 6295-1 CT until end of 2004, 6296-1 CT until end of 2004

111206

8816 P/5
Repair Set for ratchet wheel 10 = 38 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 ST, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT, 6402-1

6294-01

Torque insert lock with pin since 2005 for 6295-1 CT, 6296-1 CT

026180

8816 P/7 N
Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring, spring washer, lockring for 5121-2 CLT, 5121-2 CT, 5122-2 CLT, 5122-2 CT, 5122 ST-1 5123-2 CLT, 5123-2 CT, 6121-1 CT, 6121 CT, 6122-1 CT, 6122 CT, 6123-1 CT, 6123 CT, 6127-1 CT, 6128-1 CT, 6291-2 CT

042234

6296-01

111213

Torque Tool Assortments

025329

6122/7
Repair Set for ratchet wheel 12.5 = 12 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring, spring washer, lockring for 5121-2 CLT, 5121-2 CT, 5122-2 CLT, 5122-2 CT, 5122 ST-1 5123-2 CLT, 5123-2 CT, 6121 CT, 6121-1 CT, 6122-1 CT, 6122 CT, 6123-1 CT, 6123 CT, 6127-1 CT, 6128-1 CT, 6722 TAC

6122/9 N

Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 1016, 1016/2, 6132-1 CT, 6143 CT, 6143-1 CT, 6144 CT, 6144-1 CT, 6145 CT, 6145-1 CT, 6146-1 CT

025343

29 parts, in sheet metal box with plastic insert contents: 6290-1 CT 6450 c- 6612 c-c- 6402-16

1016/6

Repair Set for ratchet wheel 20 = 34 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 1016, 1016/2, 6132-1 CT, 6143 CT, 6143-01, 6143-1 CT, 6144 CT, 6144-01, 6144-1 CT, 6145 CT, 6145-01, 6145-1 CT, 6146-1 CT

001972

026067

6290-1 CT/29

001989

1016/8 N

Repair Set for twist lock consisting of: lock spring, twist lock with 2 headless screws for 6010-1 CT, 6110-1 CT, 6290-1 CT

6110-27

Repair Set for twist lock consisting of: lock spring, twist lock with 2 headless screws for 5121-2 CLT, 5122-2 CLT, 5123-2 CLT 6021-1 CT, 6022-1 CT, 6023-1 CT, 6111-1 CT, 6115-1 CT, 6121-1 CT, 6122-1 CT, 6123-1 CT, 6127-1 CT, 6128-1 CT, 6291-1 CT, 6291-2 CT 6292-1 CT, 6293-1 CT, 6722 TAC, 6792 TAC

025053

20 parts, in sheet metal box with plastic insert

6122-27

Repair Set for twist lock consisting of: twist lock, lock spring and cylinder screw for 6132-1 CT, 6143-1 CT, 6144-1 CT, 6145-1 CT, 6243-1 CT, 6244-1 CT, 6245-1 CT, 6246-1 CT, 6294-1 CT, 6295-1 CT, 6296-1 CT

025299

contents: 6292-1 CT 6450 d-6630 d-13 18

6144-01/3

025527

6404-21

026159

6292-1 CT/20

Seite 153
Torque Tool Assortments Torque Wrenches

6392-200 6392-320

14 x x 18

6290 6404

50-200 60-320

400 630

027118 027125

Special Levers

28 parts, in sheet metal box with plastic insert contents: 6292-1 CT 6450 d-6630 d-6404-24 Forged from solid steel With plug-and-socket-connection to accommodate insert tools For loosening tight screwed connections Without any torque functioning

026166

6292-1 CT/28

6396 6397

9 x x 18

405 635

027132 027149

Dynamometric Screwdriver

Suitable in particular for the application in series production With inside hexagon drive 6.3 = 14 for screwdriver bits Release accuracy tolerance in direction of actuation 5% Tightening at torque setting is possible to the right only Without adjustment scale DIN EN ISO 6789 Adjusting of the desired torque value with enclosed Hex Head Wrench HAZET 2100 A-3/16 in conjunction with the Hydraulic Torque Tester HAZET 6903 or 6905

Adjustment Wrench

for Torque Wrenches HAZET 6391-6392, to adjust and to lock the torque value

026678

027170

Torque Wrenches

Please note.
With lockable torque setting Suitable in particular for application in series production With plug-and-socket connection to accommodate insert tools Release accuracy tolerance in direction of actuation 2% DIN EN ISO 6789 Adjusting the desired torque value with Adjustment Wrench HAZET 6399 in conjunction with Hydraulic Torque Tester HAZET 6903, 6905 or any other suitable Tester. All Torque Wrenches of this line (HAZET 6391-6392) are without scale and without signal transmitter.
that the gauge dimension of the extended insert tool is very important for adjusting Torque Wrenches (see table and formula on page 151)
Insert Reversible Ratchets

6391-12 6391-25 6391-35

9 x x x 12

2-12 2-25 15-35

027057

6391-50 6391-85

Square drive according to DIN 3120 A, ISO 1174-1 A 6401-teeth 6402-teeth 6403-teeth 6404-teeth Chrome-Vanadium Drop-forged Surface chrome-plated

5-50 15-85

240 315

027064 027071

6401-1 6402-1 6403-1 6404-1
6,3 = = 38 12,5 = 12 12,5 = 12

9 x x x x 18

19,5 30,0 38,5 38,5

46,5 61,0 74,5 83,5

027521 027552

Seite 154

Insert Reversible Ratchets Spare Parts for Insert Reversible Ratchets
Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 S, 8816 ST 2264-1, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT 6402-1, 6402-1 S, 6408-1

Fine-tooth, 72 teeth,,rotation angle 5 Square drive according to DIN 3120 A, ISO 1174-1 A Chrome-Vanadium Drop-forged Surface chrome-plated

6404 6406

10 = 38 12,5 = 12 12,5 = = 34

58,5 58,5 70,5 101,0

027545 027576

042227

With locking device and quick release press-button Square drive according to DIN 3120 A, ISO 1174-1 A 6401-1S 20 teeth 6402-1S 30 teeth 6403-1S 32 teeth 6404-1S 32 teeth Chrome-Vanadium Drop-forged Surface chrome-plated
Repair Set for ratchet wheel 10 = 38 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 S, 6402-1 S

8816 S/7

Repair Set for ratchet wheel 6.3 = 14 J consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 2264-1, 6408-1

048465

2264-1/7

015900

21,8 61,0 74,5 83,5

027538 027569

6401-1/5
Repair Set for ratchet wheel 6.3 = 14 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 6108-1 CT, 6109-1 CT, 6109-2 CT, 6401-1

111176

6401-1S 6402-1S 6403-1S 6404-1S

6401/7

Repair Set for ratchet wheel 6.3 = 14 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 6401-1 S

111169

Reversible Ratchets for Bits

6401-1 S/7

Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring, spring washer, lockring for 6403-1, 6403-1 S, 6404-1, 6404-1 S

111152

6403-1/7
Repair Set for ratchet wheel 12.5 = 12 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring, spring washer, lockring for 6403-1, 6404-1

070756

For Screwdriver Bits Chrome-Vanadium Drop-forged Surface chrome-plated

6403-1/9

070749

027583

J drive 6.3 = 20 teeth
Repair Set for ratchet wheel 12.5 = 12 consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring, spring washer, lockring for 6403-1 S, 6404-1 S

6403-1 S/9

070817

9 x 12

J drive 8 = teeth
Repair Set for ratchet wheel 6.3 = 14 J consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 6408

6408-1

8 = 516

027590

6408/7

111145

Spare Parts for Insert Reversible Ratchets
Insert Holder with Square Drives
Set, 4 parts contents: 6413-3 4

6413/4

027651 Component and Spare Parts see pages 161 to 170

Seite 155

Spare Parts Insert Adapter with Universal Joint

6413-1

6402 6430
Holder square insert 9 x 12 drive 10 = 38

027644

Square drives 10 = 38

6413-2 6413-3 6413-4

6,3 = = 38 12,5 = 12

22,0 26,0 30,4

048885

Insert Square Drives

For the operation of screwed connections in areas with restricted access or behind obstacles e.g. with Torque Wrenches or Reversible Ratchets. May be used as extension and adapter 14 x 18 to 9 x 12 Operation with 10 = 38 possible Flat style Chrome-Vanadium Chrome-plated DBGM German registered utility model Note: Tightening with precise torque values is possible only in straight, in-line position

6423 g

14 x 18

096053

Square drive, DIN 3120 A, ISO 1174-1 Chrome-Vanadium Surface chrome-plated

Insert Adapters

6414 6416

12,5 = = 34

63,5 70,0

027668 027682

Bit Holder
With plug-and-socket-connection to accommodate insert tools drive 10 = 38 For the operation of screwed connections in areas with restricted access (engine compartment) Chrome-Vanadium Surface chrome-plated

6424 c

053759

DIN 3126, chrome-plated

6420 b 6420 c 6420 d

9 x x x 18

17,5 17,5 25,0

40,5 41,5 58,0

027927
for Torque Wrenches with plug-and-socket-connection 9 x 12 mm and insert tools (products with lateral insert dovetail guide)

6,3 = = = 516

6425 c

9,6 x 26

027941
Insert Adapters Blank-End Inserts

chrome-plated

6423 c 6423 d

14 x x 12

027934 057559
square insert 14 x 18 to 9 x 12 square insert 9 x 12 to 14 x 18

6430 c 6430 d

027958 027965
** = Note: Welding on tools with a gauge dimension > 45 mm will affect the release values

Seite 156

Open End Insert Tools Flare Nut Insert Tools

chrome-plated

9 x x x x x x x x x x x 12
17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5
42,3 42,8 43,4 43,7 44,4 45,4 45,9 46,1 46,8 48,0 48,8

028825

9 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 18
17,5 17,5 17,5 17,5 17,5 17,5 17,5 20,0 20,0 20,0 20,0 20,0 20,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 32,5 32,5 32,5 32,5 32,5 32,5 40,0
36,5 37,0 37,5 38,0 38,5 38,5 39,0 42,0 42,5 43,0 43,5 44,0 45,0 56,5 57,0 57,5 58,0 58,5 59,0 59,5 60,5 61,0 62,0 68,5 70,0 71,5 73,2 73,3 72,7 79,0

072514 028580

6450 c- c- c- c-c-c-c-c-c-c-c-c-c-d-d-d-d-d-d-d-d-d-d-d-d-d-d-d-d-d-41
6612 c-c-c-c-c-c-c-c-c-c-c-22

Box-End Insert Tools

6630 c-c-c-c-c-c-c-c-c-c-c-c-c-c-d-d-d-d-d-d-d-d-d-d-d-d-d-d-d-d-41
17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 31,0 31,0 31,0 31,0 31,0 31,0
40,0 40,6 42,1 42,8 43,5 43,8 45,0 45,5 46,5 47,0 47,8 48,8 50,0 50,8 60,8 61,5 62,0 62,9 63,6 64,3 65,3 66,5 67,3 68,8 76,8 78,5 79,8 81,3 82,5 85,5

029112 029129

z Box-End Insert Tools

for outside TORX screws

9 x x x x x x x x x x x x x x x x x x x 18
7,52 9,42 10,08 11,17 12,90 14,76 16,70 18,49 20,32 22,16 9,42 10,08 11,17 12,90 14,76 16,70 18,49 20,32 22,16
17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 17,5 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0
39,0 40,0 40,6 42,1 42,8 44,3 45,0 46,5 47,0 48,8 58,0 58,5 59,0 60,0 61,0 62,0 63,5 64,3 65,3

054879

6609 c-E c-E c-E c-E c-E c-E c-E c-E c-E c-E d-E d-E d-E d-E d-E d-E d-E d-E d-E 24

Accessories

Safe Boxes, empty plastic, black, for safe keeping of Torque Wrenches

024629

Flare Nut Insert Tools
for HAZET 5110-1 CT 6110-1 CT 6110 CT 6290-1 CT

6060 BX-2

for HAZET 5121-1 CT 6111-1 CT 6115-1 CT 6121-1 CT 6121 CT 6291-1 CT 6291-2 CT

6060 BX-4

530 635

024636 024643

for HAZET 5122-1 CT 6122-1 CT 6122 CT 6127-1 CT 6292-1 CT

6060 BX-6

Seite 157

Mechanical Angle Dials

For tightening screws as a function of the torsion angle To be used between Torque Wrenches with drive 12.5 = 12 (resp. 20 = 34) and sockets with drive 12.5 = 12 (resp. 20 = 34) With flexible magnetic holder for the fixing point Range 0 360, Graduation 1, 95 mm l
.the right torque is all that matters!

6450 6910

029266 029273

6690 6690-1

Torque Multipliers
The new HAZET Torque Multipliers 6800
For tightening and loosening tight screwed connections and for screwed connections with high torque value Avoids the application of lever arms, impact tools, etc. saves screwed connections No external power source necessary, low maintenance, high accuracy 5%

For tightening and loosening tight screwed connections Avoids the application of impact tools, extensions, lever arms, etc. No external power source necessary, low-maintenance High accuracy 5% For building and agricultural machines, trucks, plant and engine construction and shipbuilding torque ratio: 6800-700 1:3.5 6800-1400 1:3.Lg-1400 1:3.5 6800-2800 1:12
Application e.g. for building and agricultural machines, trucks, busses, plant and engine construction and shipbuilding

12,5 = = = 34

20 = = = 1

062768

6800-700 6800-1400 6800-2800
extra long style e.g. for deeply located screwed connections on commercial vehicles

6800 Lg-1400

20 = 34

25 = 1

062751

Hydraulic Torque Testers

For torque wrench testing and adjustment Tolerance 1% of scale value Low mass acceleration Reduced friction Ball-bearing primary shaft Motion of pointer damped, pointer does not swivel or move upon release of the Torque Wrench Inside 8-point drive 12.5 = 12 additional adapter 10 = 38 and 20 = 34 (included) Space-saving wall fixation with two heavy-duty dowels (included)

6903 6905

10-200 20-400

029310 029327

Seite 158

Electronic Torque Tester

Did you know that.
Enables testing Display Torque Wrenches as well as Click-Type Torque Wrenches For the peak value indication or click point recognition With function keys for the selection of the measuring units Nm and lbf. ft Display either in German or English Measuring range 10 Nm up to 500 Nm, accuracy tolerance 1% Additional torque testing sensors are available for values 10 Nm and 500 Nm With interface for the transmission of data records after each measurement Display with digital bar chart for the indication of the introduced torque value in proportion to the test value With sockets for the connection of drive 6.3 = = 38 12.5 = = 34 Suitable for wall or table fixation
HAZET is the leading manufacturer of specialty tools for the automotive industry in Germany?
the product range comprises about 5000 quality tools for professional application?
HAZET exports tools into 95 countries?

7900 E

072095
Torque Wrenches and Torque Testers are high precision measuring tools. They have to be checked with an appropriate Tester after a certain period of time and adjusted when required. The checking frequency depends on the using frequency. HAZET disposes of the corresponding Torque Testers. After testing and adjustment, the Torque Wrenches and Torque Testers sent to HAZET are supplied with a Test Certificate.

The HAZET Torque Testing Devices are constantly supervised and calibrated by the accredit Calibration Laboratory SCHATZ, German Calibration Service (DKD). This guarantees the existing essential competence in the field of controlled screw tightening as well as the high qualitity of the HAZET Torque Wrenches and Torque Testing Devices.
Conversion Chart Torque Values
lbf.ft Nm 1.4 2.7 4.1 5.4 6.8 8.1 9.5 10.8 12.2 13.6 20.3 27.1 33.9 40.7 lbf.ft Nm 47.5 54.2 61.0 67.8 81.3 94.9 108.5 122.0 135.6 162.7 189.8 216.9 244.0 271.2 Nm 35 lbf.ft 0.7 1.5 2.2 3.0 3.7 4.4 5.2 5.9 6.6 7.4 11.1 14.8 18.4 22.1 25.8

SYSTEM 5000 CT/6000 CT

Nm 200 lbf.ft 29.5 33.2 36.9 40.6 44.3 51.6 59.0 66.4 73.8 81.1 88.5 95.9 103.3 110.6 147.5
1 Nm 6737.0 lbf.ft 1 lbf.ft 8553.1 Nm
1 lbf.ft 21 lbf.in 1 lbf.in 3380.0 lbf.ft
1 Nm 0201.0 kpm 1 kpm 708.9 Nm
Note: During continuous operation with Reversible Ratchets and square drive Insert Tools (HAZET 6401-1 6416) the max. torque values are limited as follows.: 6401-1 = 40 Nm, 6402, 6402-1 = 120 Nm, 6403, 6403-1 = 120 Nm, 6404, 6404-1 = 300 Nm, 6406 = 800 Nm. The max. torque values of Open End-, Flare Nut- and Box Wrenches (HAZET 6450 6630) depend on
respective wrench size (DIN 899) and can be smaller then the max. torque value of the tool in operation. The audible and palpable clicksignal abates when torque value is lower. The release accuracy corresponds to a room temperature of 20 C. Torque Wrench to be reset to smallest value after operation!