FITTING INSTRUCTION

Clamp mark in acc. with ISO PN 1 L 2 + 4 R 5 58R 7 58L Cables joining Left directional lights Rear fog lights Ground Right directional lights Right side parking lights Stoplights Left side parking lights
3. Assemble cover plate, before install cut out his fragments according to figure 2. 4. Put main bar of the towbar pos. 1 between fixed side brackets and twist on bolts M12x35mm (pos. 6). 5. Tighten all bolts according to the torque shown in the table. 6. Assemble the bumper, before assemble cut out his fragments according to figure 3. 7. Fix the socket plate (pos. 18) as shown on the drawing. 8. Fix body of the automat (pos. 19) using bolts M12x25mm (pos. 5) from accessories. Place tow-ball (pos. 2) according to supplied instruction. 9. Connect electric wires of 7-poles socket according to the instruction of the car. (Recommend to make at authorized service station) 10. Complete paint layer damaged during installation.

cover plate

Rys. 1
This towbar is designed to assembly in following car: CITROEN C5 II 5 doors, produced since 10.2004, catalogue no. P27A and is prepared to tow trailers max total weight 1600 kg and max vertical load 75 kg. From manufacturer
Thank you for buying our product. Their reliability has been confirmed in many tests. Reliability of towbar depends also on correct assembly and right operation. For this reasons we kindly ask to read carefully this instruction and apply to hints. The towbar should be install in points described by a car producer.

195 255

Fig. 2 Cover plate cut
Fitting instructions 1. Disassemble the bumper and plastic cover plate. 2. In factory prepared places fix side brackets (pos. 3 and 4) using bolts M10x35mm pos. 7 (loosely).

Fig. 3 Bumper cut.

Towbar accessories:
PPUH AUTO-HAK S. J. Produkcja Hakw Holowniczych Henryk & Zbigniew Nejman 76-200 SUPSK ul. Soneczna 16K tel/fax (059) 8-414-414; 8-414-413 E-mail: office@autohak.com.pl www.autohak.com.pl
Towing hitch (without electrical set)

Class: A50-X

Cat. no. P 27A
Designed for: Manufacturer: CITROEN Model: C5 II Type: 5 doors produced since 10.2004
Technical data: D-value: 9,17 kN maximum trailer weight: 1600 kg maximum vertical cup load: 75 kg
Approval number acc. to regulations EKG/ONZ 55.01:

E20 55R-01 1608

Torque settings for nuts and bolts (8,8):

M Nm M Nm

M Nm M Nm Foreword
This towbar is designed according to rules of safety traffic regulations. The towing hitch is a safety component and must be installed only by qualified personnel. Any alteration or conversion to the towinh hitch is prohibited and would lead to cancellation of design certification. Remove insulating compound and underseal from vehicle (if present) in the area of the matting surfaces of the towing hitch. The vehicle manufacturers specifications regarding trailer load and max. vertical cup load are decisive for driving, and values for the towing hitch must not be exceeded. D-value formula: Max trailer weight [kg] x Max vehicle weight [kg] Max vehicle weight [kg] X 9,81 = 1000
Max trailer weight [kg] +

D [kN]