Reviews & Opinions
Independent and trusted. Read before buy Clarion DB178RMP!

Clarion DB178RMP

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Clarion DB178RMP, size: 5.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Clarion DB178RMPAbout Clarion DB178RMP
Here you can find all about Clarion DB178RMP like manual and other informations. For example: review.

Clarion DB178RMP manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Clarion DB178RMP please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Clarion DB178RMP photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

DB178RMP

CD/MP3/WMA model

DISPLAY & DESIGN

Rotary volume control White LCD display (13 x 8 seg) White button illumination Screen saver Dimmer

CD-MECHANISM

CD mechanism CD-R / CD-RW play back MP3 / WMA compatible ID3-Tag compatible

TUNER AUDIO FEATURES

2V / 2ch RCA line out Z-Enhancer (B-Boost, Excite, Impact) Magna BASS EX (50Hz +10 dB boost) 4 x 50 W high power output Front AUX input via 3,5mm mini jack connector with sense adjustment RDS / PTY -Tuner (FM/MW/LW) FM noise blanker 24 stations memory (18FM / 6AM) Auto store, Preset scan, Seek manual

GENERAL

Phone mute input OEM steering remote control input (mini jack on chassis)
ClarionProduct Planning1Europe - Hessenring 19-21 - 64546 Mrfelden-Walldorf - GERMANY GB Ltd, Unit Marshall Road, Hillmead, Swindon, Wiltshire, SN5 5YU. Tel.: +Fax: +44 (0)E-mail: amsales@clarion.co.uk Telephone: +44 (0)1793 (0) 6105 977-0 FAX: -201 - www.clarion.com - msakalli@clarion.de

doc1

Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instrues

Clarion Co., Ltd.

All Rights Reserved. Copyright 2007: Clarion Co., Ltd. Printed in Malaysia / Imprim en Malaisie / Gedruckt in Malaysia / Stampato in Malaysia Gedrukt in Maleisi / Impreso en Malasia / Tryckt i Malaysia / Impresso na Malsia
CD/MP3/WMA RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-RECEIVER RICEVITORE PER CD/MP3/WMA CD/MP3/WMA-RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-LSARE RECEPTOR CD/MP3/WMA
PE-2934E PE-2935E 280-8458-00

280-8346-00

Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
This appliance contains a laser system and is classied as a CLASS 1 LASER PRODUCT. To use this model properly, read this Owners Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest AUTHORIZED service station. To prevent direct exposure to the laser beam, do not try to open the enclosure.

CAUTIONS:

Apparaten innehller laserkomponenten som avger laserstrlning verstigande grnsen fr laserklass 1.
Suojakoteloa si saa avata. Laite sislt laserdiodin, joka lhett nkymtnt silmille vaarallista lasersteily.

VAROITUS

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNERS MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

!CAUTION

Denne mrking er anbragt udvendigt p apparatet og indikerer, at apparatet arbejder med laserstrler af klasse 1, hvilket betyder, at der anvendes laserstrler af svageste klasse, og at man ikke p apparatets yderside kan blive udsat for utilladelig kraftig strling. APPARATET BR KUN BNES AF FAGFOLK MED SRLIGT KENDSKAB TIL APPARATER MED LASERSTRLER! Indvendigt i apparatet er anbragt den her gengivne advarselsmkning, som advarer imod at foretage sdanne indgreb i apparatet, at man kan komme til at udsatte sig for laserstrling.

ADVARSEL.

DB178RMP / DB179RMP / DB179RGMP
4. DCP (Detachable Control Panel)
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (Detachable Control Panel) case to prevent scratches. We recommend taking the DCP with you when leaving the car.

Contents

1. PRECAUTIONS.... 3 Handling Compact Discs.... 4 2. CONTROLS.... 5 MAIN UNIT..... 5 3. NOMENCLATURE.... 6 Names of the Buttons and Their Functions... 6 Display Items..... 7 LCD Screen..... 7 4. DCP (Detachable Control Panel)... 8 5. OPERATIONS.... 9 Basic Operations..... 9 Radio Mode Operations..... 12 RDS Operations..... 13 CD/MP3/WMA Mode Operations.... 15 6. OTHER OPERATIONS..... 21 7. TROUBLESHOOTING.... 24 8. ERROR DISPLAYS..... 25 9. SPECIFICATIONS.... 26

Handling Compact Discs

This unit has been designed specifically for playback of compact discs bearing the mark. No other discs can be played. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.

English

Storing the DCP in the DCP case

Note on compact discs

Hold the DCP, in the orientation as shown in the gure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.)

Removing the DCP

1. Press the [SRC] button for 1 second or longer to switch off the power. 2. Press in the [RELEASE] button.
Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. Always handle the compact disc by the edges. Never touch the surface. To remove ngermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference.

! CAUTION

The DCP can easily be damaged by impact. After removing it, be careful not to drop it or subject it to strong shocks.

The DCP is unlocked

3. Remove the DCP.
When the Release button is pressed and the DCP is unlocked, the cars vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it. (See gure above.) The connector connecting the main unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with ngernails, pens, screwdrivers, etc.

1. PRECAUTIONS

1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc.
Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage.

Attaching the DCP

1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP to attach into the main unit.
Note: If the DCP connector is dirty, wipe off the dirt with a soft, dry cloth only.
Do not expose compact discs to direct sunlight or any heat source.
INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Note: Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc.
Be sure to unfold and read the next page. / Veuillez dplier et vous rfrer la page suivante. Bitte ausbreiten und die nchste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva. Volgende pagina uitvouwen en doorlezen a.u.b. / Cercirese de desplegar y de leer la pgina siguiente. Glm inte att vika ut och lsa nsta sida. / No deixe de abrir e ler a prxima pgina.
2. / CONTROLLI / REGELAARS / CONTROLES

/ KONTROLLER / CONTROLOS

MAIN UNIT / APPAREIL PRINCIPAL / HAUPTGERT / APPARECCHIO PRINCIPALE / HOOFDTOESTEL / UNIDAD PRINCIPAL / HUVUDENHET / UNIDADE PRINCIPAL
CONTROLS / LES COMMANDES / REGLER
Note: Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 5 (unfold).

[DIRECT] buttons [SCN] button
Store a station into memory or recall it directly while in the Radio mode. Perform scan play for 10 seconds of each track while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to perform all scan play while in the MP3/WMA mode. Repeat play while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to perform all repeat play while in the MP3/WMA mode.

[BND] button

Switch the band, or seek tuning or manual tuning while in the Radio mode. Play the rst track while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to select CD-DA or MP3/WMA on a Multisession disc. Adjust the volume by turning the knob clockwise or counterclockwise. Use the knob to perform various settings.

[RPT] button

[ROTARY] knob

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.

5. OPERATIONS

Basic Operations
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Main Display Clock Display Main Display. Main Display (Track No., Play Time) Clock Display Main Display. Main-1 Display (Track No., Play Time) Main-2 Display (Folder No., Play Time) Track Folder Title Album Artist Clock Display Main-1 Display. Main Display

Radio mode

CD mode

MP3/WMA mode

Turning on/off the power
Note: Be careful about using this unit for a long time without running the engine. If you drain the cars battery too much, you may not be able to start the engine and this can reduce the service life of the battery.

AUX mode

Clock Display

Main Display.

1. Press the [SRC] button. 2. The illumination and display on the unit light up. The unit automatically remembers its last Operation mode and will automatically switch to display that mode. 3. Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functions display, then revert back to the preferred display several seconds after the adjustment.

Selecting a mode

1. Press the [SRC] button to change the Operation mode. 2. Each time you press the [SRC] button, the Operation mode changes in the following order: Radio mode AUX mode CD/MP3/WMA mode Radio mode.
Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. VOL XX will be displayed where XX is the volume level from 0 (minimum) to 33 (maximum).
The factory default setting for volume is VOL 13.

Adjusting the volume

Sound mode adjustments
2. Press the [ item name. Z-EHCR BASS TREBLE BALANCE FADER ,
Note: If the CD mode is selected when no disc is inserted, the display shows NO DISC.
1. Press the [ ] button to enter the Sound Adjustment mode. ] button to select the

Switching the display

Press the [D] button to select the desired display. Each time you press the [D] button, the display switches in the following order:
3. Turning the [ROTARY] knob to adjust the selected Sound mode. Z-EHCR : Selection type : OFF B-BOOST IMPACT EXCITE OFF. BASS : Adjustment range : -7 to +7 TREBLE : Adjustment range : -7 to +7 BALANCE : Adjustment range : LEFT 12 to RIGHT 12 FADER : Adjustment range : FRONT 12 to REAR 12
Notes: If no operation is performed for more than 10 seconds, the Audio mode is cancelled and returns to the previous mode. Bass and Treble can only be adjusted when the Z-EHCR is off.

Adjusting the bass

2-1. Press the [ BASS. ,

] button and select

3-1. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. BASS XX will be displayed where XX is the value from -7 to +7.
Note: The factory default setting is BASS 0.

Adjusting the treble

2-1. Press the [ TREBLE. ,
3-1. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. TREB XX will be displayed where XX is the value from -7 to +7.
Note: The factory default setting is TREB 0.

Setting the Z-Enhancer

This unit is provided with 3 types of sound tone effects stored in memory. Select the one you prefer. 2-1. Press the [ EHCR. , ] button and select Z-

Adjusting the balance

2-1. Press the [ BALANCE. ,
3-1. Turning the [ROTARY] knob to change to the following sound tone effect.
OFF B-BOOST IMPACT EXCITE
3-1. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The display changes as follows: RIGHT XX will be displayed where XX is the value from 1 to 12. LEFT XX will be displayed where XX is the value from 1 to 12.
Notes: When Balance is 0, CENTER will be displayed instead. The factory default setting is CENTER.

: no sound effect

B-BOOST : bass emphasized ( indicator lights in the display) IMPACT EXCITE : bass and treble emphasized ( indicator lights in the display) : bass and treble emphasized mid de-emphasized ( indicator lights in the display)
Note: The factory default setting is OFF.
Basic Operations Adjusting the fader
2-1. Press the [ FADER. , ] button and select

AUX function

3-1. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The display changes as follows: FRONT XX will be displayed where XX is the value from 1 to 12. REAR XX will be displayed where XX is the value from 1 to 12.
Notes: When Fader is 0, CENTER will be displayed instead. The factory default setting is CENTER.
This system has an external jack input in the front panel where you can listen to sounds and music from external devices connected to this unit. 1. Connect the external music player to the [AUX] input. 2. Press the [SRC] button and select the AUX mode to activate the AUX function.
Notes: Use only the 3.5mm stereo jack for the AUX jack input. Volume can be adjusted through the unit. If you face difculties of hearing sound even after volume has been adjusted, please refer section Selecting AUX IN sensitivity on page 23 for details.

Adjusting MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. ] button for 1 second 1. Press and hold the [ or longer to turn on the MAGNA BASS EX effect. indicator lights in the display. ] button for 1 second 2. Press and hold the [ or longer to turn off the MAGNA BASS EX effect.

When seek tuning starts, DX appears in the display.

DX SEEK

Manual memory function
2. Press the [ , desired station.
1. Press the [BND] button and to select a band you want to store in the memory. ] button to tune into a
If the button is pressed and held in position for 1 second or longer, local seek tuning will be enabled. Broadcast stations with good reception sensitivity are selected.
When local seeking starts, LO appears in the display.

LOCAL SEEK

3. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Radio Mode Operations Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains un-overwritten at the memory position. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)). ] button for 2 seconds 2. Press and hold the [ or longer. The stations with good reception are stored automatically to the preset channels. A-STORE will be displayed.
If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.

RDS Operations

RDS (Radio Data System)
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching). Also, if a trafc announcement or programme type is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic switching of other preset stations on the same network and interruption of the station being received with trafc information from other stations (TP). This function is not available in some areas. When using the RDS function, always set the radio to FM mode. AF PS PTY TP : Alternative Frequency : Programme Service Name : Programme Type : Trafc Programme

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [ ] button. 2. When a desired station is tuned in, press the [ ] button again to continue receiving that station. P-SCN will be displayed and SCN indicator lights in the display.
Note: ] button Be careful not to press and hold the [ for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
EON : Enhanced Other Network
RDS interrupt does not function during AM radio reception. When set receives RDS signal, and can read PS data, PS appears in the display.

A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)). 2. Press the corresponding [DIRECT] button to recall the stored station.
Recalling a preset station

TA (Trafc Announcement)

In the TA standby mode, when a trafc announcement broadcast starts, the trafc announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Trafc programme (TP) automatic tuning is also possible.
This function can only be used when TP is lit in the display. When TP is lit, this means that the RDS broadcast station being received has trafc announcement programmes.
If you press the [TA] button when only TP is lit in the display, TP and TA light in the display and the unit is set into the TA standby mode until a trafc announcement is broadcast. When a trafc announcement broadcast starts, TRA INFO appears in the display. If you press the [TA] button while a trafc announcement broadcast is being received, the trafc announcement broadcast reception is cancelled and the unit goes into the TA standby mode. As TP and TA lit in the display, press the [TA] button. The TA in the display goes off and the TA standby mode is cancelled.
If TP is not lit, pressing the [TA] button searches for a TP station.
Setting the TA standby mode
If you press the [SRC] button, emergency broadcast reception is cancelled.
Cancelling an emergency broadcast
Volume setting of TA, emergency broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt.
The factory default setting for this volume is VOL 15.
Cancelling the TA standby mode
During a TA, ALARM or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33).
When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt.
When TP is not lit, if you press the [TA] button, TA in the display lights and the unit automatically receives a TP station.
Note: If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off TA in the display and stops TP station searching.
Searching for a TP station

RDS Mode adjustment

RDS Mode is one of the Adjustment mode. Please refer chapter 6. OTHER OPERATIONS on page 21 for details.
Auto store function for TP stations
You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. ] As TA lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.

Precautions when creating MP3/WMA disc
Usable sampling rates and bit rates:

Folder structure

1. Up to 254 les can be recognized per folder. Up to 254 les can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording.

Number of les or folders

7. When a Mixed mode CD is loaded and CD is set, the track to be played rst is MP3/WMA le data and no sound is heard.
Note: When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WMA type, the CD cannot be played normally in some cases.
CD-DA/MP3/WMA selection on multi-session CD
Do not try to put your hand or ngers in the disc insertion slot. Also never insert foreign objects into the slot. Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down. This unit is designed for play of 12cm compact disc only. Do not attempt to use 8cm CD singles in this unit, either with or without an adaptor, as damage to the player and/or disc can occur. Such damage will not be covered by the warranty on this product.
1. If a multi-session CD which contains CD-DA and MP3/WMA les is being inserted, user can select either CD-DA or MP3/WMA les to be played. 2. Default setting for les to be played on multisession CD is CD-DA les. 3. Press the [BND] button for more than 1 second will toggle between selection of CD-DA and MP3/WMA les to be played. 4. When CD-DA type is selected, display will show M-SESS then CD. When MP3/WMA type is selected, display will show M-SESS then MP3. 5. CD-DA/MP3/WMA selection function can only be performed in CD/MP3/WMA mode. It will only activate after re-insert CD. For example, current setting is CD-DA type. Press [BND] button for more than 1 second to set MP3/WMA type. User has to eject CD and re-insert again as to play MP3/WMA les. 6. Types of recording that can be played are as follows.
Setting Set to CD Set to MP3/WMA Disc Mixed with CD-DA Play CD- Play MP3/WMA and MP3/WMA DA type tracks CD-DA type track only MP3/WMA type track only Play CDDA Play CD-DA

Backup eject function

] button ejects the disc even if Pressing the [ the power to the unit was not turned on. Remove the disc after it is ejected.
Notes: If you force a CD into before auto reloading, this can damage the CD. If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

Play MP3/ Play MP3/WMA WMA
Press the [SRC] button to select the CD/MP3/ WMA mode. CD/MP3 will be displayed. When the unit enters CD/MP3/WMA mode, play starts automatically. Radio CD/MP3/WMA AUX Radio.
Note: The default display is Main Display (Track No./ Play Time).
Listening to a disc already loaded in the unit
CD/MP3/WMA Mode Operations Loading a CD
The arrangement is shown below. Main-1 Display (Track No., Play Time) Clock Display Main-1 Display. Insert a CD into the center of the CD SLOT with the labeled side facing up. LOADING appears in the display, the CD plays automatically after loading.
Notes: When the unit enters the CD/MP3/WMA mode, FILEREAD will be displayed to check the disc type and its contents. If the inserted disc is a CD-DA format, CD will be displayed for a while. However, if the inserted disc is a MP3/WMA format, MP3 will be displayed for a while. MP3/WMA indicator will be lit on according to type of le detected. indicator will be lit on if MP3 le is detected. indicator will be lit on if WMA le is detected. Then, the rst track will be played automatically. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the by this unit. mark cannot be played

CD-DA disc

Main-1 Display (Track No., Play Time) Main-2 Display (Folder No., Play Time) Track Folder Title Tag Album Tag Artist Tag Clock Display Main-1 Display. where Track, Folder, Title Tag, Album Tag and Artist Tag are called Title Display.

MP3/WMA disc

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Ejecting the CD

Press the [ ed.
] button, then the CD will be eject-
Notes: If there is no disc loaded, the indication "NO DISC" appears in the display and return to Radio mode after 4 seconds. If the CD is not removed after ejecting, CD will be automatically reloaded after 15 seconds and this will not automatically switch to CD/MP3/WMA mode.

Pausing play

] button to pause play. PAUSE 1. Press the [ appears in the display. 2. To resume CD play, press the [ again. ] button

Display selection

1. You can choose the display type for CD-DA or MP3/WMA disc by pressing the [D] button. To select the next type, press the [D] button again.
Note: Each of the items in Title Display will display TRACK, FOLDER, TITLE, ALBUM or ARTIST respectively for 2 seconds before showing related title information.

] button to select a track.

Top function

The top function resets the CD player to the rst track of the disc. Press the [BND] button to play the rst track (Track No. 1) on the disc.
In case of MP3/WMA, the rst track of a folder being played will be returned.
Other various play functions
CD-DA: This function allows you to locate and play the rst 10 seconds of all the tracks recorded on a disc. MP3/WMA: This function allows you to locate and play the rst 10 seconds of all the tracks in all the folders.

Scan play

Folder select
This function allows you to select a folder containing MP3/WMA les and start playing from the rst track in the folder. 1. Press the [DN] or the [UP] button. Press the [DN] button to move the previous folder. Press the [UP] button to move the next folder.
1. Press the [SCN] button to perform scan play. TRK SCN appears in the display while the SCN indicator lights in the display.
Scan play starts from the next track after the track currently being played. Scan play will proceed to next folder after all the tracks in the current folder have been scanned.
MP3/WMA: This function allows you to locate and play the rst 10 seconds of the rst track of all the folders on an MP3/WMA disc. 1. Press and hold the [SCN] button for 1 second or longer to perform folder scan play. ALL SCN appears in the display while the ALL and SCN indicators light in the display.
All scan play starts from the rst track of next folder after the track currently being played.

All scan play

CD-DA, MP3/WMA: This function allows you to play the current track repeatedly. 1. Press the [RPT] button to perform repeat play. TRK RPT appears in the display while the RPT indicator lights in the display. MP3/WMA: This function allows you to play all tracks in the MP3/WMA folder repeatedly. 1. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. ALL RPT appears in the display while the ALL and RPT indicators light in the display. CD-DA: This function allows you to play all tracks recorded on a disc in a random order. MP3/WMA: This function allows you to play all tracks of current folder in a random order. 1. Press the [RDM] button to perform random play. TRK RDM appears in the display while the RDM indicator lights in the display.
Random play will proceed to next folder after all the tracks in the current folder have been played.

If no station with the selected PTY broadcast can be received, the unit returns to the previous receiving station.
OFF: REG in the display goes off and REG function turns off.
Manually tuning a regional station in the same network
1. This function is valid when the AF function is ON and the REG function is OFF.
Note: This function can be used when a regional broadcast of the same network is received.
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
The factory default setting is ON.

AF function

2. Press any one of the [DIRECT] buttons to call out the regional station. 3. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network.
2-1. Select AF. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON: AF in the display lights and AF function turns on. OFF: AF in the display goes off and AF function turns off.
If the reception of the current broadcast station deteriorates, SEARCH appears in the display and the radio searches for the same programme on another frequency.
This unit is provided with the screen saver function which allows you to show screen saver in the operation status indication area of the display. You can turn on and off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
Turning the screen saver function on or off
When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received.
The factory default setting is OFF. Notes: This function is disabled when a national station such as BBC R2 is being received. The REG function ON/OFF setting is valid when the AF function is ON.
REG (Regional programme) function
2-1. Select SCRN SVR. 3-1. Turn the [ROTARY] knob to select "ON" or "OFF". ON: Screen saver is enabled. OFF: Screen saver is disabled.
Set auto scroll function for MP3/WMA title.
Setting the method for title scroll

2-1. Select REG. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON: REG in the display lights and REG function turns on.
2-1. Select SCROLL. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON: To scroll automatically. OFF: To scroll just 1 time when the title was changed.

Other Operations

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difcult to hear even after adjusting the volume.
The factory default setting is MID.
Selecting AUX IN sensitivity
OFF: This unit continues normal operation even when the cellular phone is used. ON: You can listen to your telephone calls from the speakers connected to this unit. MUTE: The sound from this unit is muted during telephone calls.
Notes: This unit requires hands-free kit that supports [AUX] input as a source of cellular phone audio input. Please consult your local authorized Clarion dealer for more information on the handsfree kit offered. If connecting a hands-free kit, please ensure the setting is ON to receive the telephone audio through the system. When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob, it will be memorized as new telephone volume. The factory default setting for this volume is VOL 15. This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telephones. Please contact your local authorized Clarion dealer for information on proper installation and compatibility.
2-1. Select AUX SENS. 3-1. Turn the [ROTARY] knob to select LOW, MID or HIGH.
Note: For telephone interrupt, AUX SENS is always "MID".
The factory default setting is RIGHT.
Setting the car speaker output for the cellular phone
To output the telephone calls, set the cellular phone interrupt to ON.
2-1. Select TEL-SP. 3-1. Turn the [ROTARY] knob to select RIGHT or LEFT. RIGHT Telephone calls can be heard on the front right speaker connected to this unit. LEFT Telephone calls can be heard on the front left speaker connected to this unit. If you connect this unit and your cellular phone with a separately sold unit, you can listen to your telephone calls on your car speakers.

 

Tags

Inspiron 500M 959NF Stomp Centro Touch 93ST-A MZ-RH710 New York Yzea 500 MC-806BLR IC-M810 HR2000 Montana 2002 CS-30L-cs-30-cs-10 LS-Q076ABL EE410-R ER-A320 B3031A Stylus T26 Dell 922 CM 200 DTH615 Pspice Servers CK2320-60 Canoscan-4200F VN-480 DXI8560 2 USA DSR8121 MZ-EH70 PRO 25 Review V1233 NAS-M7HD FW-1082 42PF5331-10 TH-50PX7E Speaky Color 580 DW12-EFM MD-R2 Sa-sttl CUC 7301 FTM-10R EC460 37PFL9603D Rising FS726TP XL-UR5H GX-70HD M45-S165 MYX-3 TXP46G15E PSR-310-PSR-210 L-400 WD-1018C Premium VX724 EL-1750piii Dreamweaver R-5000 RH389H AG-HVX200 Sens W SC-HT75 L600V Palmtop PC Series R200-DB11Z GA-7ZXE DMC-LZ1 DSC-T700 P Optio M85 KX-T7350 GI100 CW-29Z418P HDR-SR8 KX-TD208E RZ-32LZ55 016 E Asus P2V KX-FT982FX XL400 Galeo 5250 A1200I DPF-A710 JBL ES90 SC-HT990 Samsung PL60 Dangerous 2 F50672 EQA-20 XES-M50 Nespresso M300 2300C DSC-T700 R TDM-IP1 Vectis 300 DD-6200 LE40R86WD

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101