Owners manual Mode demploi Manual de instrucciones
AM/FM CD/MD PLAYER WITH CD/MD CHANGER CONTROL RADIO AM/FM-LECTEUR CD/MD AVEC PILOTAGE DE CHANGEUR CD/MD RADIO DE AM/FM Y REPRODUCTOR DE CD/MD CON CONTROL DE CAMBIADOR DE CD/MD

Clarion Co., Ltd.

1999/3 (ToK)
All Rights Reserved. Copyright 1999: Clarion Co., Ltd. Printed in Japan / Imprim en Japon / Inpreso en Japn

PE-4018B 280-7323-00

Thank you for purchasing the Clarion DMX5555z. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer and TV connected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals, but no explanations for operating them are described.

Contents

1. FEATURES..... 2 2. PRECAUTIONS.... 3 Handling Compact Discs..... 4 Handling Mini Discs.... 4 3. CONTROLS.... 5 4. NOMENCLATURE.... 6 Names of Buttons.... 6 Display Items..... 6 5. REMOTE CONTROL..... 7 Inserting the Batteries.... 7 Functions of Remote Control Unit Buttons... 8 6. OPERATIONS.... 9 Basic Operations..... 9 Radio Operations.... 11 CD Operations.... 13 MD Operations.... 14 Other Handy Functions..... 16 7. OPERATIONS OF ACCESSORIES... 18 CD Changer Operations.... 18 MD Changer Operations.... 20 TV Operations.... 21 8. TROUBLESHOOTING.... 23 9. ERROR DISPLAYS.... 24 10. SPECIFICATIONS.... 25

1. FEATURES

s s s s s s s s s s s s 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters Zero-Bit DetectorTM Mute Circuit 4M Bit Read Ahead Memory (Approximately 10 Seconds) for Shock and Vibration FM Reception System Controller for Optional TV Tuner Modules Capability to Read CD TEXT Data from Clarion Compatible CD Changer Z-Enhancer with 3 Adjustment Modes Repeat / Random Play / Intro Music Scan CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling Bass Control Center Frequency : 30Hz / Boost Level : 15dB 4V/4-Channel RCA Line Level Output with Fader Control 160W(40W4) Maximum Power Output

DMX5555z

Functions of Remote Control Unit Buttons

Mode Button

FUNC BAND DISC UP PROG TOP

2. PRECAUTIONS

Switches reception band.

Handling Compact Discs

Use only compact discs bearing the 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs.

CD changer MD changer

Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, CD, MD, CD changer, MD changer and TV. Switches reception band. Plays the first track. Top play. Plays the first track. Top play. Moves the next disc in increasing order.

; VOLUME

SEARCH
Increases and decreases volume (in all modes). Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. Switches between playback and pause. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. Switches between playback and pause. Moves tracks up Moves preset channels up and down. and down. When pressed and held for 1 second: Fast-forward/ fast-backward. Switches between playback and pause. No function.
1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.

Handling

New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.

Ball-point pen

To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Storage

CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. INFORMATION FOR USERS:. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

Roughness

PLAY/PAUSE

No function.

MUTE ISR
Turns mute on and off. Recalls ISR radio station in memory. Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only). Switches among main display, sub display and clock display. Preset scan. When pressed and held for 2 seconds: Auto store. No function. Scan play. Scan play. Scan play. When pressed and held for 1 seconds: Disc scan play. Repeat play. When pressed and held for 1 seconds: Disc repeat play. Random play. When pressed and held for 1 seconds: Disc random play. Preset scan. When pressed and held for 2 seconds: Auto store. No function.

DISP SCN PS/AS

Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.
Do not expose compact discs to direct sunlight or any heat source. Do not expose compact discs to excess humidity or dust. Do not expose compact discs to direct heat from heaters.

Cleaning

To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. Do not use any solvents, such as commercially available cleaners, anti-static spray or thinner to clean compact discs. After using special compact disc cleaner, let the compact disc dry off well before playing it.

Handling Mini Discs

Use only MDs bearing the mark. If you try to play such a minidisc, you may not be able to get it back out of the MD player or it may damage the MD player.

RPT BLS

Repeat play.
12V GROUND AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. US AND FOREIGN PATENTS LICENSED FROM DOLBY LABORATORIES LICENSING CORPORATION CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN

MANUFACTURED:

Never open the shutter on the MD cartridge.

RDM DOLBY NR MONI

Random play.
Switches between TV and VTR.
Do not expose minidiscs to direct sunlight or any heat source. Do not expose minidiscs to excess humidity or dust. Do not expose minidiscs to direct heat from heaters.

Radio Operations Manual tuning
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press BAND button ! and select the desired band (FM or AM).
If MANU is not lit in the display, press and hold BAND button ! for 1 second or longer. MANU lights in the display and manual tuning is now available.

CD Operations

Recalling a preset station
Pressing the corresponding preset button recalls the stored radio frequency automatically. 1. Press BAND button ! and select the desired band (FM1, FM2, FM3 or AM). 2. Press the corresponding Preset button 1 to recall the stored station.
Press and hold one of the Preset buttons 1 for 2 seconds or longer to store that station into preset memory.

Loading a CD

Insert a CD into the center of the insertion slot with the label side facing up. The CD plays automatically after loading. Notes: Never insert foreign objects into the CD insertion slot. When a CD is loaded in the unit, CD IN indication 1 lights in the display. Never try to insert another CD in this case. Discs not bearing the mark and CD-ROMs cannot be played by this unit. Loading 3" (8 cm) compact discs
No adapter is required to play a 3" CD. Insert the 3" CD into the center of the insertion slot. When a 3" CD is loaded, SINGLE lights in the display.
Notes: If you force a CD into before auto reloading, this can damage the CD. The radio mode is selected automatically 4 seconds after CD EJECT button ) is pressed.

Selecting a track

q Track-up 1. Press Right button to move ahead to the beginning of the next track. 2. Each time you press Right button , the track advances ahead to the beginning of the next track. q Track-down 1. Press Left button % to move back to the beginning of the current track. 2. Press Left button % twice to move to the beginning of the previous track.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press PS button 5. 2. When a desired station is tuned in, press PS button 5 again to continue receiving that station. Note: Be careful not to press and hold PS button 5 for 2 seconds or longer, otherwise the auto store function engages and the unit starts storing stations.

The scan play is useful when you want to select a desired track.

Auto store

Auto store selects up to 6 stations and automatically stores them into preset memory. If auto store cannot tune in all six stations, then it stores the strongest stations into memory and the other presets untouched. 1. Press BAND button ! and select the desired band (FM or AM). 2. Press and hold AS button 5 for 2 seconds or longer. The stations with good reception are stored automatically to the preset buttons.

Ejecting a CD

Press CD EJECT button ) to eject the CD. Take it out from the ejected position. If a 5" CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded (Auto reload). 3" CDs (8 cm) are not auto reloaded. Be sure to remove it when ejected.
1. Press SCN button 5 to start track scanning. SCN lights in the display. 2. To cancel the scan play, press SCN button 5 again. SCN goes off from the display and the current track continues to play.
CD Operations Repeat play
The repeat play continuously plays the current track. This function continues automatically until it is canceled. 1. Press RPT button 6. RPT lights in the display and the current track is repeated. 2. To cancel the repeat play, press RPT button 6 again. RPT goes off from the display and normal play resumes.

MD Operations

Loading an MD
After confirming the orientation of an MD, insert the MD into the insertion slot. Notes: Never insert foreign objects into the MD insertion slot. When an MD is loaded in the unit, MD IN indication 0 lights in the display. Never try to insert another MD in this case. mark cannot An MD that does not carry the be used with this unit.
MD Operations Selecting a track

Random play

The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is canceled. 1. Press RDM button 8. RDM lights in the display, an individual track is selected randomly and play begins. 2. To cancel the random play, press RDM button 8 again. RDM goes off and normal play resumes.
The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is canceled. 1. Press RDM button 8. RDM lights in the display, an individual track is selected randomly and play begins. 2. To cancel the random play, press RDM button 8 again. RDM goes off from the display and normal play resumes.

Adjusting the display contrast
You can adjust the display contrast according to the angle of installation of the unit.
The factory default setting is LEVEL 6. (Adjustment level: 1 to 11)
Setting the speed of the spectrum analyzer display
The factory default setting is HIGH.
6. Press ENT button @ to store the time into memory. 7. Press ADJ button # to return to the previous mode. Note: You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the cars battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select ANA SPD. 3. Press Up button & or Down button * to set the speed of the spectrum analyzer display. You can choose one of LOW, MID or HIGH for the speed of the spectrum analyzer display. 4. Press ADJ button # to return to the previous mode.

Clearing titles

1. Play a CD or a CD in a CD changer, or tune a radio station or TV station that you want to clear the title for. 2. Press DISP button 3 and display the subtitle. 3. Press TITLE button #. TITL appears in the display and the display switches to the title input display. 4. Press BAND button !. 5. Press and hold ENT button @ for 2 seconds or longer to clear the title and cancel the title input mode.
1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select CONTRAST. 3. Press Up button & or Down button * to adjust the contrast. 4. Press ADJ button # to return to the previous mode.

Message display

When the unit is powered on or off, a message is displayed. The user can turn this message display on or off.
The factory default setting is ON.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for radio or TV stations and CDs. The numbers of titles that can be entered for each mode are as follows. Mode Radio mode CD mode TV mode CD changer mode CDC655z connected CDC655Tz connected CDC1255z connected Number of titles 30 titles 100 titles 15 titles Number of titles 60 titles 100 titles 50 titles

Switching the spectrum analyzer display patterns
You can select one out of 4 patterns or set it to off.
The factory default setting is PATTERN 1.
Adjusting the way of title scrolling
There are 3 ways for scrolling a title in the display. You can select the way you prefer.
The factory default setting is AUTO.
Each time you press SPE-ANA button 4, the spectrum analyzer display pattern changes in the following order: PATTERN 1 PATTERN 2 PATTERN 3 PATTERN 4 OFF PATTERN 1. Note: The spectrum analyzer display is unavailable during these operations below; Seek tuning and auto store in radio mode. Mute or pause. When NO DISC or an error message appears in the display.
1. Press FUNC button 7 to select the mode you want to enter a title. (radio, CD, CD changer or TV)
Setting the sensitivity of the spectrum analyzer
The factory default setting is MID.
1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select ANA SENS. 3. Press Up button & or Down button * to set the sensitivity of the spectrum analyzer. You can choose one of LOW, MID or HIGH for the sensitivity of the spectrum analyzer.
2. Select and play a CD or a CD in the CD changer, or tune to an appropriate TV or radio station. 3. Press DISP button 3 and display the title. 4. Press TITLE button #. TITL appears in the display and the cursor position flashes. 5. Press Right button or Left button % to move the cursor. 6. Press DISP button 3 to select a character. Each time you press DISP button 3, the character changes in the following order: Capital letters Small letters Numbers/ Symbols Capital letters.
1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select SCROLL. 3. Press Up button & or Down button * to change the display. Each time Up button & or Down button * is pressed, the display changes among the 3 display methods available. AUTO: The title automatically scrolls over and over again. 1-TIME: A title scrolls once. To have title scroll again, press TITLE button #. MANUAL: You must press TITLE button # to scroll the display. 4. Press ADJ button # to return to the previous mode.

1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select MESSAGE. 3. Press Up button & to set the message display to ON; press Down button * to set the message display to OFF. 5. Press ADJ button # to return to the previous mode.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
7. OPERATIONS OF ACCESSORIES

CD Changer Operations

CD changer functions
When an optional CD changer is connected through the CeNET cable, this unit controls all the CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FUNC button 7 and select the CD changer mode to star t play. If 2 CD changers are connected, press FUNC button 7 to select the CD changer for play.
If NO MAGA appears in the display, insert the magazine into the CD changer. CHECK appears in the display while the player loads (checks) the magazine. If NO DISC appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.
CD Changer Operations Top function
The top function plays from the first track (track No. 1) of the disc. q When playing a disc 1 to 6 Press the Direct button 1 (1 to 6) with the same number as the CD playing. q When playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press and hold for 1 second or longer the Direct button 1 (7 to 12) with the same number as the CD playing.
If a CD is not loaded in a slot of the magazine, pressing the Direct button 1 corresponding to its disc number is invalid.

Selecting a CD

Each of the Direct button 1 corresponds to a disc loaded into the magazine. q Selecting a disc from 1 to 6 Press the corresponding Direct button 1 (1 to 6) to select the desired disc. q Selecting a disc from 7 to 12 (only when a 12 disc CD changer is used.) Press and hold the corresponding Direct button 1 (7 to 12) for 1 second or longer to select the desired disc.

Disc repeat play

After all the tracks on the current disc have been played, the disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is canceled. 1. Press and hold RPT button 6 for 1 second or longer. DISC indication & and RPT light in the display and the disc repeat play starts. 2. To cancel the disc repeat play, press and hold RPT button 6 again. DISC indication & and RPT go off from the display and normal play resumes on the current track.

CD-ROM discs cannot be played in the CD changer.
1. Press Play/pause button @ to pause play. PAUSE appears in the display. 2. To resume play, press Play/pause button @ again.
The random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is canceled. 1. Press RDM button 8. RDM lights in the display and the random play begins. 2. To cancel the random play, press RDM button 8 again. RDM goes off from the display and normal play resumes.

Disc scan play

The disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer. This function continues automatically until it is canceled.
The disc scan play is useful when you want to select a desired CD.
This unit can display title data for CD-text CDs and user titles input with this unit.
Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz.
q When connected to CDC655z or CDC1255z Press DISP button 3 to display the title. q When connected to CDC655Tz 1. Press DISP button 3 to display the title. 2. Each time you press and hold DISP button 3 for 1 second or longer, the title display changes in the following order: User title (disc) CD-text title (disc) CDtext title (track) user title (disc). Notes: If the CD playing is not a CD-text CD or no user title has been input, USER TTL appears in the display. If a CD-text CD is not input its disc title or a track title, TEXTDTTL or TEXTTTTL appears in the display.
1. Press and hold SCN button 5 for 1 second or longer. DISC indication & and SCN light in the display and the disc scan play starts. 2. To cancel the disc scan play, press SCN button 5 again. DISC indication & and SCN go off from the display and the current track continues to play.

Disc random play

The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is canceled. 1. Press and hold RDM button 8 for 1 second or longer. DISC indication & and RDM light in the display and the disc random play starts. 2. To cancel the disc random play, press and hold RDM button 8 again. DISC indication & and RDM go off from the display and normal play resumes from the current track.

MD Changer Operations

MD changer functions
When an optional MD changer is connected through the CeNET cable, this unit controls all the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FUNC button 7 and select the MD changer mode to start play. If 2 MD changers are connected, press FUNC button 7 to select the MD changer for play.

If NO DISC appears in the display, load MDs into the MD changer.
q Track-down 1. Press Left button % to move back to the beginning of the current track. 2. Press Left button % twice to move to the beginning of the previous track.

TV Operations

TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.

Watching a TV

1. Press FUNC button 7 and select the TV mode. 2. Press BAND button ! to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2. 3. Press Right button or Left button % to tune in the desired TV station.
The top function plays from the first track (track No. 1) of the disc. Press the Direct button 1 (1 to 6) with the same number as the MD playing.
If an MD is not loaded in a slot of the MD changer, pressing the Direct button 1 corresponding to its disc number is invalid.

Watching a video

The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press RDM button 8 to select VTR. 2. To return to the TV broadcast, press RDM button 8.
Switching disc titles and track titles
This unit can display disc titles and track titles already entered on MDs.
1. Press DISP button 3 to display the title. The disc title or track title is displayed. 2. Each time you press and hold DISP button 3 for 1 second or longer, the display toggles between the disc title and the track title. Note: If an MD is not input its disc title or a track title, D TITLE or T TITLE appears in the display.

Tuning

Selecting an MD
Each of the Direct button 1 corresponds to an MD loaded into the MD changer. Press the corresponding Direct button 1 (1 to 6) to select the desired disc.
1. Press BAND button ! and select the desired TV band (TV1 or TV2).
The disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected MD changer. This function continues automatically until it is canceled.
The disc scan play is useful when you want to select a desired MD.
q Track-up 1. Press Right button to move ahead to the beginning of the next track. 2. Each time you press Right button , the track advances ahead to the beginning of the next track.
1. Press and hold SCN button 5 for 1 second or longer. DISC indication & and SCN light in the display and the disc scan play starts. 2. To cancel the disc scan play, press and hold SCN button 5 again. DISC indication & and SCN go off from the display and the current track continues to play.

Press and hold one of the Preset buttons 1 for 2 seconds or longer to store the current station into the preset memory.
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. 1. Press PS button 5. 2. When a desired station is found, press PS button 5 again to remain tuned to that station. Note: Do not press and hold PS button 5 for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.

General

Nothing happens when buttons are pressed. Display is not accurate.
The microprocessor has malfunctioned due to noise, etc.
Setting the receiver for Diversity tuning
CD cannot be loaded. Sound skips or is noisy.
Another CD is already loaded. CD is dirty. CD is heavily scratched or warped.
Eject the CD before loading the new one. Clean the CD with a soft cloth. Replace with a CD with no scratches or no warped. Let it dry for about 1 hour with the power on.
You can change the reception setting for the TV antenna connected to the TV tuner. 1. Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display. 2. Press Right button or Left button % to select TV DIVER. 3. Press Up button & to set to ON or Down button * to set to OFF. ON: In the ON position, the TV tuner emphasizes the visual signal by choosing the antenna with the best signal strength. This requires more than one antenna on the vehicle. OFF: Set the TV Diver adjustment to the OFF position when only using one antenna on the vehicle. 4. Press ADJ button # to return to the previous mode.
Sound is bad directly after power is turned on. MD cannot be loaded.
Water droplets may form on the internal lens when the car is parked in a humid place. Another MD is already loaded.
Eject the MD before loading the new one. Insert correctly. Replace with a pre-recorded MD. Replace with an MD with no scratches or no warped. Let it dry for about 1 hour with the power on.
1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the Preset buttons 1 for 2 seconds or longer to store the current station to that preset memory.
MD is immediately MD inserted wrongly. ejected. Non-recorded MD is loaded.
Sound skips or is noisy. Sound is bad directly after power is turned on.
MD is heavily scratched or warped. Water droplets may form on the internal lens when the car is parked in a humid place.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.
Error Display ERROR 2 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. An MD is caught inside the MD deck and is not ejected. An MD cannot be played due to scratches, etc. A CD inside the CD changer is not loaded. A CD inside the CD changer cannot be played due to scratches, etc. A CD inside the CD changer cannot be played because it is loaded upside-down. Displayed when the temperature in the MD changer is too high and playback has been stopped automatically. An MD inside the MD changer is not loaded. An MD inside the MD changer cannot be played due to scratches, etc. Displayed when a non-recorded MD is loaded in the MD changer. Measure This is a failure of CD decks mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. This is a failure of MD decks mechanism and consult your store of purchase. Replace with a non-scratched, non-warped-disc. This is a failure of CD changers mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. Eject the disc then reload it properly. Lower the surrounding temperature and wait for a while to cool off MD changer. This is a failure of MD changers mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. Load a pre-recorded MD in the MD changer.

10. SPECIFICATIONS

FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response (3 dB): 30 Hz to 15 kHz
Maximum Power Output: 160 W (40 W 4 ch) (EIAJ) Continuous Average Power Output: 14 W 4, into 4 , 20 Hz to 20 kHz, 1%THD Bass Control Action (30 Hz): 15 dB Treble Control Action (10 kHz): 10 dB Line Output Level (MD 1 kHz): 4V

ERROR 3 ERROR 2

Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 (4 to 8 allowable) Weight / Source unit: 5.5 lb. (2.5 kg) Weight / Remote control unit: 1 oz. (30 g) (including battery) Dimensions / Source unit: 7" (Width) 3-15/16" (Height) 6-1/8" (Depth) [178 (W) 100 (H) 155 (D) mm] Dimensions / Remote control unit: 1-3/4" (Width) 4-5/16" (Height) 1-1/8" (Depth) [44 (W) 110 (H) 27 (D) mm]

CD changer

AM Tuner
Frequency Range: 530 kHz to 1710 kHz Usable Sensitivity: 25 V

ERROR 3 ERROR 6 ERROR H

CD Player
Frequency Response (1 dB): 10 Hz to 20 kHz Signal to Noise Ratio (1 kHz): 100 dB Dynamic Range (1 kHz): 95 dB Harmonic Distortion: 0.01%

MD changer

ERROR 2 ERROR 3 ERROR 6
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

MD Player

Frequency Response (2 dB): 20 Hz to 20 kHz Signal to Noise Ratio (1 kHz): 90 dB Dynamic Range (1 kHz): 85 dB Harmonic Distortion: 0.01%
Notes: Specifications comply with EIA Standards. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Specifications and design are subject to change without notice for further improvement.

Slave Units

DXZ925 DXZ825 DXZ815MP DXZ715 MXZ715 DMZ825MP/DMZ815MP DMZ725LP DMZ616LP/TM DMZ615 ADZ615 DMZ525LP ADZ525 DMZ415 ADZ415 MRX960Z DMX960Z DMX7655z VRX925VD VRX825 MAX625/MAX615 MAX6655z MAX420VD DMX7555z DMX6655z/ADX6655z DMX5655z/ADX5655z DMX5555z/ADX5555z MRX8675z/8575z MRX4555z HX-D1 HX-D10 DRX8675z/8575z ARX6570z DRX740Z DMX740Z/740ZII VRX740Z MAX450ZF/440Z MAX4555z
CDS8655z MSZ715 CDS960Z MDS740Z CDS8555z
DCZ625 CDR655z CDC640z CDR1255z DPH910 VCZ625 MDC640Z CDR640Z CDR1240Z

DVH920 DPH7500z JCH540Z

RVH4500z NAX940ZF

NAX950DV

NAX010VD TSZ720 TVS7650z TTX7500z NAX960DV TSZ710 TVS7550z NAX960DVD