Owners manual Mode demploi Manual de instrucciones

DRX8675z

AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL COMBIN RADIO/CD AM/FM AVEC PILOTE DE CHANGEUR CD/MD RADIO DE AM/FM Y REPRODUCTOR DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DISCOS COMPACTOS/MINIDISCOS

Clarion Co., Ltd.

1999/8 (CLC)
All Rights Reserved. Copyright 1999: Clarion Co., Ltd. Printed in China / Imprim en Chine / Inpreso en China

PE-2332B 280-7401-00

Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer, TV tuner and digital sound processor (DSP) connected via the CeNET cable. The CD changer, MD changer, TV tuner and DSP have their own manuals, but no explanations for operating them are described.

Contents

1. FEATURES..... 2 2. PRECAUTIONS.... 3 Handling Compact Discs..... 4 Flip Down Panel.... 4 3. CONTROLS.... 5 4. NOMENCLATURE.... 6 Names of Buttons.... 6 Display Items..... 6 5. DCP..... 7 6. REMOTE CONTROL..... 8 Inserting the Batteries.... 8 Functions of Remote Control Unit Buttons... 9 7. OPERATIONS.... 10 Basic Operations..... 10 Radio Operations.... 13 CD Operations.... 14 Other Handy Functions..... 16 8. OPERATIONS OF ACCESSORIES... 18 CD Changer Operations.... 18 MD Changer Operations.... 20 TV Operations.... 21 DSP Operations.... 23 9. TROUBLESHOOTING.... 27 10. ERROR DISPLAYS.... 28 11. SPECIFICATIONS.... 29

1. FEATURES

s s s s s s s s s s s s Rotary Encoder Volume Control with Multi-Color Prism Key Touch-n-Go Flip Down Detachable Face Controller for Optional DSP/EQ & TV Tuner Modules Built-In CD TEXT, Also Reads CD TEXT Data from Clarion Compatible CD Changer Z-Enhancer with 3 Adjustment Modes CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling FM Reception System 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters Zero-Bit Detector Mute Circuit 4V/4-Channel RCA Line Level Output with Fader Control 4V/2-Channel Non-Fade RCA Line Level Output with Volume Control 180W (45W4) Maximum Power Output

6. REMOTE CONTROL

Receiver for remote control unit

2. PRECAUTIONS

DRX8675z

Handling Compact Discs

Use only compact discs bearing the 3. When the auto antenna cord is connected to the car auto antenna cord, when the unit is switched to the radio mode (or the TV mode), the antenna is extended automatically. If the car is in a narrow space, the antenna may strike something, so be careful. 4. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs.
Operating range: 30 in all directions

Remote control unit

Signal transmitter
1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.

Handling

New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.

Ball-point pen Roughness

To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Storage

Do not expose compact discs to direct sunlight or any heat source. Do not expose compact discs to excess humidity or dust. Do not expose compact discs to direct heat from heaters.

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. INFORMATION FOR USERS:. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.

Cleaning

To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. Do not use any solvents, such as commercially available cleaners, anti-static spray or thinner to clean compact discs. After using special compact disc cleaner, let the compact disc dry off well before playing it.

Flip Down Panel

This unit uses a flip-down structure that makes possible large-size displays.

Inserting the Batteries

1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (UM-3/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.

AA (UM-3/1.5V) Batteries

12V GROUND AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE TAHT MAY CAUSE UNDESIRED OPERATION.
When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured. 1. Always use this unit with the FLIP DOWN PANEL closed. 2. Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL.
Bottom View of Source Unit
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN

Notes:

Using batteries improperly can cause them to explode. Take note of the following points: When replacing batteries, replace both batteries with new ones. Do not short-circuit, disassemble or heat batteries. Do not dispose of batteries into fire or water. Dispose of spent batteries properly.

Rear cover

MANUFACTURED:
SERIAL No. PE286Clarion Co.,Ltd. MADE IN
3. Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open. 4. When closing the FLIP DOWN PANEL, do not press OPEN button 1. 5. Strong impacts to the operating or display section can cause damage or deformation. 6. If the FLIP DOWN PANEL does not open fully, gently open it with your hand.

Rear side

Be sure to unfold and read the next page. Veuillez dplier et vous rfrer la page suivante. Cercirese de desplegar y de leer la pgina siguiente.
3. CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente

4. NOMENCLATURE

Note: Be sure to read this chapter referring to the front diagrams of chapter 3. CONTROLS on page 5 (unfold).

5. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car.

Names of Buttons

1 OPEN button
9 Preset buttons (1 to 6) Direct buttons (1 to 6) (7 to 12) ! DISP (display) button " ISR (instant station recall) button # BND (band) button TOP button $ A-M (audio mode) button LOUD (loudness) button % SEARCH button & Rotary knob ( CD insertion slot ) Eject button

Removing the DCP

1. Hold down POWER button 3 for 1 second or longer to turn off the power.

Attaching the DCP

1. Insert the right side of the DCP into the source unit. 2. Insert the left side of the DCP into the source unit.

2 ENT (enter) button

Play/pause button 3 POWER button FNC (function) button
4 TITLE button ADJ (adjust) button 5 PS/AS (preset scan/auto store) button SCN (scan) button 6 RPT (repeat) button 7 RDM (random) button 8 Z-EHCR (z-enhancer) button
With the FLIP DOWN PANEL opened / Ouverture du PANNEAU RABATTABLE / Apertura del PANEL ABATIBLE
2. Deeply push in OPEN button 1 to unlock the FLIP DOWN PANEL.
If the FLIP DOWN PANEL does not open fully, gently open it with your hand.

Display Items

1 Single disc indication 2 Disc in indication 3 EASY mode indication 4 G.EQ indication 5 DSP indication 6 PRO (professional) mode indication 7 P.EQ indication 8 S.EQ indication 9 Preset channel indication (1 to 6) Disc number indication (1 to 12)
The disc numbers corresponding to the discs in the CD or MD changer light.
$ A-M (audio mode) indication % LD (loudness) indication & Graphic indication
Levels are displayed in adjusting the volume, etc.
3. Pull the DCP toward you and remove it.

( Long title indication

When the texts for CD or MD are more than 11 characters, this indication lights.
Display / Afficheur / Visualizador
) Operation status indication
The frequency, play time, clock, etc. are displayed.
The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks. If the FLIP DOWN PANEL is kept open, the DCP may drop due to vibration of the car. This results in damage to the DCP. So close the FLIP DOWN PANEL or remove the DCP to store into the case. The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc. Note: If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

4. Close the HOLD FLAP.

~ RDM (random) indication + RPT (repeat) indication , SCN (scan) indication - DISC indication. Z-EHCR (z-enhancer) indication

HOLD FLAP

! ST (stereo) indication " MANU (manual) indication # Function mode indication
The names of modes being selected, etc. are displayed.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez dplier cette page et vous rfrer aux schmas quand vous lisez chaque chapitre. Nota: Cuando lea los captulos, despliegue esta pgina y consulte los diagramas.

Be sure to close the HOLD FLAP for safety when removing the DCP.