Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the iPod interface, CD/DVD changer, DAB and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer and TV tuner have their own manuals, but no explanations for operating them are described. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus

Contents

CONTROLS.....ii 1. PRECAUTIONS.....3 Flip Down Panel.... 3 Handling Compact Discs.... 4 2. NOMENCLATURE.....5 Names of the Buttons and Their Functions... 5 Display Items.... 6 LCD Screen..... 6 3. DCP.....7

[OPEN]

[TA] [DIRECT] (4-6) [ [DISP]

[ROTARY] [BND] ] (SOUND)

4. REMOTE CONTROL....8 Functions of Remote Control Unit Buttons.... 8 Inserting the Battery.... 10 5. OPERATIONS.....11 Basic Operations.... 11 Radio Operations..... 14 RDS Operations.... 16 CD/MP3/WMA Operations.... 20 Operations Common to Each Mode... 24 6. OPERATIONS OF ACCESSORIES...27 iPod BB Operations.... 27 CD Changer Operations.... 29 DVD Changer Operations.... 30 TV Operations..... 31 Digital Radio / DAB Operations.... 32 7. IN CASE OF DIFFICULTY....35 8. ERROR DISPLAYS....36 9. SPECIFICATIONS....37
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU INCLINABLE Bei geffnetem KLAPPBILDSCHIRM / A CONSOLE APRIBILE aperta Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura del PANEL ABATIBLE Med den NEDFLLBARA KONSOLEN ppen / Com a CONSOLA RECLINVEL aberta

[ ] (EJECT)

[CD SLOT]
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez dplier cette page et vous rfrer aux schmas quand vous lisez chaque chapitre. Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten. Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo. Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken. Nota: Cuando lea los captulos, despliegue esta pgina y consulte los diagramas. Observera: Vik ut denna sida fr att kunna se bilderna ver bilstereons framsida, medan du lser de olika kapitlen. Nota: Certifique-se de abrir esta pgina e consulte os diagramas frontais conforme realiza a leitura de cada captulo.

DXZ378RMP_EN.book 3

1. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate. 2. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 3. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.

Flip Down Panel

This unit uses a flip-down structure that makes possible large-size displays.

CAUTION

When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured. 1. Always use this unit with the FLIP DOWN PANEL closed. 2. Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL. 3. Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open. 4. When closing the FLIP DOWN PANEL, do not press the [OPEN] button. 5. Strong impacts to the operating or display section can cause damage or deformation. 6. If the FLIP DOWN PANEL does not open fully, gently open it with your hand.

DXZ378RMP_EN.book 4

Handling Compact Discs
Use only compact discs bearing the mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. or

Storage

Do not expose compact discs to direct sunlight or any heat source. Do not expose compact discs to excess humidity or dust. Do not expose compact discs to direct heat from heaters.

Handling

Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. New discs may Ball-point pen have some roughness Roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage. To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Cleaning

To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. After using special compact disc cleaner, let the compact disc dry off well before playing it.

DXZ378RMP_EN.book 5

2. NOMENCLATURE
Note: Be sure to read this chapter referring to the front diagrams of chapter CONTROLS on page ii (unfold).
Names of the Buttons and Their Functions

[OPEN] button

Deeply push in [OPEN] button to unlock the flip down panel.

[ROTARY] knob

Adjust the volume by turning the knob clockwise or counterclockwise.

[DIRECT] buttons

Store a station into memory or recall it directly while in the radio mode.

[BND] button

Switch the band, or seek tuning or manual tuning while in the radio mode. Play a first track while in the CD/MP3/WMA mode. Press the button to change the character.

[SCN] button

Perform scan play for 10 seconds of each track while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to perform folder scan play while in the MP3/WMA mode.

] (SOUND) button

[RPT] button
Perform repeat play while in the CD/MP3/ WMA mode. Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3/WMA mode.
Use the button to switch to the sound adjust mode. Press and hold the button for 1 second or longer to turn on or off the MAGNA BASS EXTEND mode.

[DISP] button

Switch the display indication. Press and hold the button for 1 second or longer to enter the adjust mode.

[RDM] button

Perform random play while in the CD/MP3/ WMA mode. Press and hold the button for 1 second or longer to perform folder random play while in the MP3/WMA mode.

[TA] button

Use the button to set the TA (Traffic Announcement) standby mode.

[x], [v] buttons

Select a station while in the radio mode or select a track while in the CD/MP3/WMA mode. This button is used to make various settings. Press and hold the button for 1 second or longer to enter the fast-forward or fastbackward mode.

DXZ378RMP_EN.book 12

Sound Adjustment
You can adjust a sound effect or tone quality to your preference.
When IMPACT is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to 3.
The factory default setting is 0.

To change sound setting

1. Press the [ ] button to switch to the sound adjustment selection display.
The factory default sound setting is ZEHCR.
2. Then press the [x] or [v] button to select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order: Z-EHCR BASS TREBLE BALANCE FADER
In the case of display blinking ENT, you can press the [ ] button to adjust the setting value.
3-4. Press the [ ] button to return to previous mode. When B-BOOST is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass in the range of +3 to 3.

3-4. Press the [ mode.

] button to return to previous

Adjusting the bass

This adjustment can be performed only when the Z-Enhancer is set to OFF. 2-1. Select BASS. 3-1. Press the [w] or [z] button to adjust the bass.
The factory default setting is 0. (Adjustment range: +8 to 8)
3. Press the [w] or [z] button to adjust the selected audio mode. 4. After completing settings, press the [ ] button to return to the previous mode.

Adjusting the treble

This adjustment can be performed only when the Z-Enhancer is set to OFF. 2-1. Select TREBLE. 3-1. Press the [w] or [z] button to adjust the treble.
The factory default setting is 0. (Adjustment range: +7 to 7)

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.
The factory default setting is OFF.
2-1. Select Z-EHCR. 3-1. Each time you press the [w] or [z] button, the tone effect changes in the following order: EXCITE IMPACT B-BOOST OFF EXCITE : bass and treble emphasized mid deemphasized IMPACT : bass and treble emphasized B-BOOST : bass emphasized OFF : no sound effect When EXCITE is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to 3.

Adjusting the balance

2-1. Select BALANCE. 3-1. Press the [w] or [z] button to adjust the balance of the right and left speakers.

The factory default setting is CENTER (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))

Adjusting the fader

2-1. Select FADER. 3-1. Press the [w] or [z] button to adjust the balance of the rear and front speakers.
The factory default setting is CENTER (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12)) Note: During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.

DXZ378RMP_EN.book 13

Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.
The factory default setting is OFF (off).

CT (Clock Time) function

The CT function receives CT data sent from an RDS station and displays the time.
If a CT data is not being received, CT : appears in the display. Note: CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT may not display accurately.
1. Press and hold the [ ] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. M-B EX lights in the display. 2. Press and hold the [ ] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. M-B EX goes off.

DXZ378RMP_EN.book 14

Radio Operations

Listening to the radio

1. Press the [SRC] button and select the radio mode. The frequency or PS and PTY appears in the display.
PS: Programme service name PTY: Programme type
LOCAL SEEK If the [x] or [v] button is pressed and held in position for 1 second or longer, local seek tuning will be enabled. Broadcast stations with good reception sensitivity are selected.
When local seeking starts, LO SEEK appears in the display.
2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 FM2 FM3 AM (MW/LW) FM1. 3. Press the [x] or [v] button to tune in the desired station.

Manual tuning

There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).

The factory default setting is ON.
1. Press and hold the [DISP] button for 1 second or longer to switch to the RDS adjustment selection display. 2. Press the [x] or [v] button to select REG. 3. Press the [w] or [z] button to select ON or OFF. ON: REG in the display lights and REG function turns on. OFF: REG in the display goes off and REG function turns off. 4. Press the [DISP] button to return to the previous mode.
1. Press and hold the [DISP] button for 1 second or longer to switch to the RDS adjustment selection display. 2. Press the [x] or [v] button to select AF. 3. Press the [w] or [z] button to select ON or OFF. ON: AF in the display lights and AF function turns on. OFF: AF in the display goes off and AF function turns off.

DXZ378RMP_EN.book 17

Manually tuning a regional station in the same network
1. This function is valid when the AF function is ON and the REG function is OFF.
Note: This function can be used when a regional broadcast of the same network is received.
Auto store function for TP stations
You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. As TA lit in the display, press and hold the [ ] button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.
Even if you select FM1 or FM2, a TP station is stored into memory for FM3.
2. Press any one of the [DIRECT] buttons to call out the regional station. 3. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network.

PTY (Programme Type)

This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. The factory default setting is OFF.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.
This function can only be used when TP is lit in the display. When TP is lit, this means that the RDS broadcast station being received has traffic announcement programmes.
Setting the TA standby mode If you press the [TA] button when only TP is lit in the display, TP and TA light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, TRA INFO appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Cancelling the TA standby mode As TP and TA lit in the display, press the [TA] button. The TA in the display goes off and the TA standby mode is cancelled.

If no station with the selected PTY broadcast can be received, the unit returns to the PTY select mode.

PTY preset memory

1. Press and hold the [DISP] button for 1 second or longer to switch to the RDS adjustment selection display. 2. Press the [x] or [v] button to select PTY SELECT. 3. Press the [ ] button.

DXZ378RMP_EN.book 19

Emergency broadcast
If an emergency broadcast is received, all the function mode operations are stopped. ALARM ! appears in the display and the emergency broadcast can be heard. Cancelling an emergency broadcast If you press the [TA] button, emergency broadcast reception is cancelled.
Volume setting of TA, emergency broadcast (Alarm) and PTY
The volume for TA, Alarm and PTY interrupts can be set during TA, Alarm or PTY interrupt.
The factory default setting is 15.
During a TA, Alarm or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33).
When the TA, Alarm or PTY interrupt ends, the volume returns to the level it had before the interrupt.
Switching the PTY display language
You can select one of 4 languages (English, German, Swedish or French) for the PTY displayed in the display.
The factory default setting is ENGLISH.
1. Press the [DISP] button to switch to the adjustment selection display. 2. Press the [x] or [v] button to select LANGUAGE. 3. Press the [w] or [z] button to select the desired language. 4. Press the [DISP] button to return to the previous mode.

DXZ378RMP_EN.book 20

CD/MP3/WMA Operations

English MP3/WMA

What is MP3?
MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CDR disc or CD-RW disc to allow a long listening time without having to change CDs.
Precautions when creating MP3/ WMA disc
Usable sampling rates and bit rates 1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR 2. WMA: Bit rate 48 kbps-192 kbps File extensions 1. Always add a file extension.MP3 or.WMA to MP3 or WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. 2. Files without MP3/WMA data will not play. The indication : appears in the play time display if you attempt to play files without MP3/WMA data. Logical format (File system) 1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select ISO9660 level 1, 2 or JOLIET or Romeo as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 3. Do not affix a name to a file inside a folder having the same name. Folder structure 1. A disc with a folder having more than 8 hierarchical levels will be impossible. Number of files or folders 1. Up to 255 files can be recognized per folder. Up to 510 files can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording.

Notes: Never insert foreign objects into the CD SLOT. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the or mark and CD-ROMs cannot be played by this unit. Some CDs recorded in CD-R/CD-RW mode may not be usable.

Backup Eject function

Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on. 1. Press the [OPEN] button to open the FLIP DOWN PANEL.
Note: If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.
3. Close the FLIP DOWN PANEL.
2. Press the [Q] button. Remove the disc after it is ejected. 3. Close the FLIP DOWN PANEL.
Notes: Always close the FLIP DOWN PANEL once you take out the disc. If you force a CD into before auto reloading, this can damage the CD. If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).
Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.
Notes: If the FLIP DOWN PANEL does not open fully, gently open with your hand. After loading a CD, always close the FLIP DOWN PANEL.

DXZ378RMP_EN.book 22

Pausing play
1. Press the [ ] button to pause play. PAUSE appears in the display. 2. To resume CD play, press the [ ] button again.
Fast-forward/fast-backward
Fast-forward 1. Press and hold the [v] button for 1 second or longer. Fast-backward 1. Press and hold the [x] button for 1 second or longer.
For MP3/WMA discs, it takes some time until the start of searching and between tracks. In addition, the playing time may have a margin of error.

Displaying CD titles

This unit can display title data for CD-text/MP3/ WMA disc and user titles input with this unit. 1. Each time you press the [DISP] button to change the title display. CD-TEXT disc User Track Disc (Artist) User. MP3/WMA disc Track Folder Title (Album) Artist Track.
Notes: If the CD playing is not a CD-text CD or no user title has been input, NO TITLE appears in the display. If MP3/WMA disc is not input TAG, NO TAG appears in the display. For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. Tag displays give priority to V2.3 / 2.2. In the case of album Tags for WMA, the information written into the extension header is displayed. Only ASCII characters can be displayed in Tags.

second or longer to cancel the input message. Then press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.
2-1. Select ILLUMI. 3-1. Press the [w] or [z] button to select GREEN or AMBER.
Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
2-1. Select SCROLL. 3-1. Press the [w] or [z] button to select ON or OFF. ON: To scroll automatically. OFF: To scroll just 1 time.
2-1. Select SCRN SVR. 3-1. Press the [w] or [z] button to select the setting.

DXZ378RMP_EN.book 25

Setting the dimmer control
You can set the dimmer control ON or OFF.
Setting the car speaker output for the cellular phone
The factory default setting is RIGHT. To output the telephone calls, set the cellular phone interrupt to ON.
2-1. Select DIMMER. 3-1. Press the [w] or [z] button to select ON or OFF.

Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.
2-1. Select BLINK LED. 3-1. Press the [w] or [z] button to select ON or OFF.
2-1. Select TEL-SP. 3-1. Press the [w] or [z] button to select RIGHT or LEFT. RIGHT: Telephone calls can be heard on the front right speaker connected to this unit. LEFT: Telephone calls can be heard on the front left speaker connected to this unit.
Setting the external amplifier
Cellular phone interrupt setting
If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.
2-1. Select A-CANCEL. 3-1. Press the [w] or [z] button to select ON or OFF. ON: Use with connected AMP. OFF: Use with inside AMP.

Set the cellular phone connection mode (AUX/CeNET)
You can listen to your telephone calls from the speakers connected to this unit.
The factory default setting is AUX.
2-1. Select TEL-SW. 3-1. Press the [w] or [z] button to select the setting. Each time you press the [w] or [z] button, the setting changes in the following order: ON OFF MUTE ON: You can listen to your telephone calls from the speakers connected to this unit.
When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob.
2-1. Select TEL-SEL. 3-1. Press the [w] or [z] button to select AUX or CENET. AUX: AUX input jack in front panel is for cellular phone audio input, when the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT373) (sold separately). CENET: CENET input cable is for cellular phone audio input, when a CeNET cable is used to connect a cellular phone (BLT433 or TEL-002) (sold separately).
OFF: This unit continues normal operation even when the cellular phone is used. MUTE: The sound from this unit is muted during telephone calls.
Note: If connecting a hands-free kit, please ensure the setting is ON to receive the telephone audio through the system.

DXZ378RMP_EN.book 26

Performing a system check
This function allows you to perform a system check from the adjust mode when required. 2-1. Select SYSTEM CHECK. 3-1. Press and hold the [ ] button for 1 second or longer. SYSTEM CHECK appears in the display, then the unit returns to the previous operation mode.

Clearing titles

1. Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title. 2. Press and hold the [DISP] button for 1 second or longer. 3. Press the [x] or [v] button to select TITLE INPUT. 4. Press the [ ] button. The display switches to the title input display. 5. Press and hold the [BND] button for 1 second or longer. All characters in the title disappear. 6. Press and hold the [ ] button for 2 seconds or longer to store the setting.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.
Mode CD mode TV mode CD changer mode DCZ628 connected Number of titles 50 titles 20 titles Number of titles 100 titles

AUX function

This system has an external input jack on the front panel so you can listen to sounds and music from external devices connected to this unit.
1. Press the [SRC] button to select the mode you want to enter a title (CD, CD changer or TV). 2. Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title. 3. Press and hold the [DISP] button for 1 second or longer. 4. Press the [x] or [v] button to select TITLE INPUT. 5. Press the [ ] button. The display switches to the title input display. 6. Press the [x] or [v] button to move the cursor. 7. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order: Capital letters Numbers Symbols Umlaut Capital letters 8. Press the [w] or [z] button to select the desired character. 9. Repeat steps 6 to 8 to enter up to 10 characters for the title. 10.Press and hold the [ ] button for 2 seconds or longer to store the title into memory.

Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.
The factory default setting is MID.
1. Press and hold the [DISP] button for 1 second or longer. 2. Select AUX SENS. 3. Press the [w] or [z] button to select LOW, MID or HIGH.

DXZ378RMP_EN.book 27

6. OPERATIONS OF ACCESSORIES

iPod BB Operations

iPod BB
This section describes operations when connected to a CeNET iPod Interface (EA1276E). (Hereinafter, iPod Interface (EA1276E) is abbreviated as iPod BB.)
Note: See the iPod BB Owners Manual for details regarding iPod BB connections and operation conditions.
Other various play functions (in Play mode)
Notes: These functions are not supported when in the iPod menu mode. The Random function set on the iPod or when connected to iPod BB, remains the same after attachment/ detachment of the iPod. The iPod BB can be set simultaneously for All repeat and All random. The display will appear as follows:

(Function)

Connecting an iPod
When an iPod is connected to the iPod BB interface, the Repeat set on the iPod will become All repeat play instead. Likewise, Shuffle set on the iPod will become as follows: Shuffle (Albums) play Random play Shuffle (Songs) play All random play The iPod BB interface has two modes, the Play mode and the iPod menu mode for selecting tracks. Switch between these modes by pressing the [BND] button.

All random + All repeat

Random + All repeat

(Display)

Play back one track repeatedly. 1. Press the [RPT] button.

Select iPod BB Interface

1. Press the [SRC] button. Playback will begin from the last file that was played on the iPod alone or through the iPod BB.
Note: The following operations in Play mode operate the same as in CD mode: Track selection: [x], [v] Fast-forward/fast-backward: [x], [v] Pause: [ ] See CD/MP3/WMA Operations (page 20-23) for details.

All repeat play

Repeatedly play all tracks within a selected category. 1. Press and hold the [RPT] button for 1 second or longer.
Play all albums within a selected category, in random order. (Corresponds to Shuffle (Albums) command on iPod.) 1. Press the [RDM] button.

All random play

Play all tracks within a selected category, in random order. (Corresponds to Shuffle (Songs) command on iPod.) 1. Press and hold the [RDM] button for 1 second or longer.

1. Press the same play button once again.
Note: When the all repeat play mode is canceled, playback will stop when all tracks have been played.

DXZ378RMP_EN.book 28

Selecting category from the iPod menu
1. Press the [BND] button to select the iPod menu mode. The iPod menu categories will be displayed.
Note: Repeat and Random mode operations are not supported when in the iPod menu mode.
Selecting category using preset memory
1. Press the [BND] button to select the iPod menu mode. The category can be set as follows in the [DIRECT] (1-6) buttons. [1] : PLAY LISTS [2] : ARTISTS [3] : ALBUMS [4] : SONGS [5] : GENRES [6] : COMPOSERS 2. Press the desired [DIRECT] (1-6) button to select the category.
Subfolders may be displayed, depending on the category. In this case, use the [w] and [z] buttons to switch between subfolders, then use the [v] button to select the desired subfolder.
2. Press the [w] or [z] button to switch between categories. The iPod menu categories alternate in the following order: PLAY LISTS COMPOSERS GENRES SONGS ALBUMS ARTISTS .
Note: The iPod menu mode can be canceled by performing one of the following operations: Press the [BND] button. When the category select screen is displayed, press the [v] button.
3. Press the [v] button to select the category. 4. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled.
Subfolders may be displayed, depending on the category. In this case, use the [w] and [z] buttons to switch between subfolders, then use the [v] button to select the desired subfolder. When the track name display is showing, pressing the [x] button will return to the currently playing folder name display.
3. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled.
Use the [w] and [z] buttons to select a track within a category.

About title display

This unit supports the display of title information transmitted from a connected iPod. Character code information is UTF-8; displayable characters include English alphanumerics, some symbols, and some umlaut characters. Unsupported characters will be replaced by asterisks (*).
5. Use the [w] and [z] buttons to select a track within a category.

DXZ378RMP_cover.fm 1

CAUTIONS:
This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT. To use this model properly, read this Owners Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest AUTHORIZED service station. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Apparaten innehller laserkomponenten som avger laserstrlning verstigande grnsen fr laserklass 1.

ADVARSEL.

Denne mrking er anbragt udvendigt p apparatet og indikerer, at apparatet arbejder med laserstrler af klasse 1, hvilket betyder, at der anvendes laserstrler af svageste klasse, og at man ikke p apparatets yderside kan blive udsat for utilladelig kraftig strling. APPARATET BR KUN BNES AF FAGFOLK MED SRLIGT KENDSKAB TIL APPARATER MED LASERSTRLER! Indvendigt i apparatet er anbragt den her gengivne advarselsmkning, som advarer imod at foretage sdanne indgreb i apparatet, at man kan komme til at udsatte sig for laserstrling.

Clarion Co., Ltd.

2006/12
All Rights Reserved. Copyright 2006: Clarion Co., Ltd. Printed in China / Imprim en Chine / Gedruckt in China / Stampato in Cina Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
CD/MP3/WMA RECEIVER WITH CeNET CONTROL AUTORADIO CD/MP3/WMA / AVEC COMMANDE CeNET CD/MP3/WMA-RECEIVER MIT CeNET-STEUERUNG SINTOLETTORE CD/MP3/WMA CON CONTROLLO CeNET CD/MP3/WMA-RADIO-COMBINATIE MET CeNET-BEDIENING RECEPTOR CD/MP3/WMA CON CONTROL CeNET CD/MP3/WMA-RADIO MED CeNET-KONTROLL RECEPTOR CD/MP3/WMA COM CONTROLO CeNET

PE-2906E 280-8454-00

Be sure to unfold and read the next page. / Veuillez dplier et vous rfrer la page suivante. Bitte ausbreiten und die nchste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva. Volgende pagina uitvouwen en doorlezen a.u.b. / Cercirese de desplegar y de leer la pgina siguiente. Glm inte att vika ut och lsa nsta sida. / No deixe de abrir e ler a prxima pgina.

DXZ378RMP/DXZ379RMP

Portugus Svenska Espaol Nederlands

DXZ378RMP DXZ379RMP

Italiano
Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instrues

VAROITUS

Suojakoteloa si saa avata. Laite sislt laserdiodin, joka lhett nkymtnt silmille vaarallista lasersteily.

!CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNERS MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Deutsch Franais

English

DXZ378RMP_cover.fm 2

CONTROLS/LES COMMANDES/BEDIENELEMENTE/CONTROLLI BEDIENINGSORGANEN/CONTROLES/KONTROLLER/CONTROLOS
Main unit / Appareil principal / Hauptgert / Apparecchio principale Hoofdapparaat / Unidad principal / Huvudenhet / Unidade principal
[DIRECT] (1-3) [SCN], [RPT], [RDM] [SRC] [ ] [IR RECEIVER] [AUX]
Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the iPod interface, CD/DVD changer, DAB and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer and TV tuner have their own manuals, but no explanations for operating them are described. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus

Contents

CONTROLS.....ii 1. PRECAUTIONS.....3 Flip Down Panel.... 3 Handling Compact Discs.... 4 2. NOMENCLATURE.....5 Names of the Buttons and Their Functions... 5 Display Items.... 6 LCD Screen..... 6 3. DCP.....7

[OPEN]

[TA] [DIRECT] (4-6) [ [DISP]

[ROTARY] [BND] ] (SOUND)

4. REMOTE CONTROL....8 Functions of Remote Control Unit Buttons.... 8 Inserting the Battery.... 10 5. OPERATIONS.....11 Basic Operations.... 11 Radio Operations..... 14 RDS Operations.... 16 CD/MP3/WMA Operations.... 20 Operations Common to Each Mode... 24 6. OPERATIONS OF ACCESSORIES...27 iPod BB Operations.... 27 CD Changer Operations.... 29 DVD Changer Operations.... 30 TV Operations..... 31 Digital Radio / DAB Operations.... 32 7. IN CASE OF DIFFICULTY....35 8. ERROR DISPLAYS....36 9. SPECIFICATIONS....37
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU INCLINABLE Bei geffnetem KLAPPBILDSCHIRM / A CONSOLE APRIBILE aperta Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura del PANEL ABATIBLE Med den NEDFLLBARA KONSOLEN ppen / Com a CONSOLA RECLINVEL aberta

[ ] (EJECT)