[A-M] button

Press the button to switch to the audio mode. (bass/treble, balance/fader) Press and hold for 1 second or longer to turn on or off the M-B EX mode. Select a station while in the radio mode or select a track when listening to a CD. This lever is used to make various settings. Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.

] lever

Eject a CD when it is loaded into the unit.

] button

[CD SLOT]

CD insertion slot.

Major Button Operations when external equipment is connected to this unit
For details, see the section CD changer operations. For the DVD changer, refer to the Owners Manual provided with the DVD changer.
When the CD/DVD changer is connected
Perform scan play for 10 seconds of each track. Press and hold the button for 1 second or longer to perform disc scan play.

Play or pause a CD, DVD.

Select a track when listening to a disc. Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.
Press the button to display the title (Main display, Title display, Clock display). Press and hold the button for 1 second or longer to enter the display adjust mode.

When the TV is connected

[ ] button
For details, see the section TV Operations.
Press the button switches the user titles or track titles, etc. while in the CD changer mode. Press and hold the button for 1 second or longer to input a title in the CD changer mode. Press the button to scroll the title during CD-text play.
Perform preset scan while in the TV mode. Press and hold the button for 2 seconds or longer to perform auto store.
Switch the band. Press and hold the button for 1 second or longer to switch to the seek tuning or manual mode.
Move the next disc in increasing order.

[ADJ] button

[UP], [DN] buttons

Select the disc.

Store a station into memory or recall it directly.
Press the button to switch to the ADJ mode. Press and hold the button for 1 second or longer to switch to the TV picture mode or VTR (external) picture mode.

[RDM] button

Perform random play. Press and hold the button for 1 second or longer to perform disc random play.
Perform repeat play. Press and hold the button for 1 second or longer to perform disc repeat play.

Select a station.

Display Items

English 6

LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.

4. PRECAUTIONS

1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

! CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
5. HANDLING COMPACT DISCS
This unit has been designed specically for playback of compact discs bearing the or mark. No other discs can be played. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.

English 8

Note on compact discs
Always handle the compact disc by the edges. Never touch the surface. To remove ngermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference.
Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.
Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage.

Turning on/off the power

Main display
Note: Be careful about using this unit for a long time without running the engine. If you drain the cars battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1. Press the [SRC] button. 2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode. 3. Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Note: System check The rst time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the SYSTEM CHECK appears in the display, then the unit returns to the clock display mode. The system check starts within the unit. When the system check is complete, press the [SRC] button again.

Title display

In the case of a user title, only the top level is displayed. In the case of radio/TV/AUX/DVD changer, the display cannot be switched to Title Display. Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functions display, then revert back to the preferred display several seconds after the adjustment. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. For details, refer to the subsection Turning the screen saver function on or off in section Operations Common to Each Mode. When you have entered a title in a CD/MP3/WMA, it appears in the title display. If you have not entered a title, NO TITLE appears in the title display instead. For information on how to enter a title, refer to the subsection Entering titles in section Operations Common to Each Mode.

Selecting a mode

1. Press the [SRC] button to change the operation mode. 2. Each time you press the [SRC] button, the operation mode changes in the following order: Radio mode CD/MP3/WMA mode CD changer mode DVD changer mode TV mode AUX mode Radio mode.
External equipment not connected with CeNET is not displayed.
Basic Operations Adjusting the volume
1. Press the front part of the [ROTARY] knob. The knob will pop up. 2. Turning the [ ROTARY ] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
The volume level is from 0 (minimum) to 33 (maximum).

Adjusting the balance

1. Press the [A-M] button and select BALANCE 0. 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.
The factory default setting is 0. (Adjustment range: L13 to R13)

Audio mode adjustments

1. Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed: BASS TREBLE BALANCE FADER Previous mode 2. Turning the [ROTARY] knob to adjust the selected audio mode. : BASS (Bass) Adjustment range : -6 to +7 TREBLE (Treble) : Adjustment range : -6 to +6 BALANCE (Balance) : Adjustment range : L13 to R13 FADER (Fader) : Adjustment range : F12 to R12
The display returns to the previous mode 7 seconds after the adjustment.
3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1. Press the [A-M] button and select FADER 0. 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.
The factory default setting is 0. (Adjustment range: F12 to R12)

Setting the Z-Enhancer

Adjusting the bass
This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.
The factory default setting is Z-ENHANCER OFF.
1. Press the [A-M] button and select BASS 0. 2. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass.
The factory default setting is 0. (Adjustment range: -6 to +7)
Each time you press the [Z] button, the tone effect changes in the following order: OFF BASS BOOST IMPACT EXCITE OFF. BASS BOOST : bass emphasized IMPACT : bass and treble emphasized EXCITE : bass and treble emphasized mid de-emphasized OFF : no sound effect

Adjusting the treble

1. Press the [A-M] button and select TREBLE 0. 2. Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble.
The factory default setting is 0. (Adjustment range: -6 to +6)

Radio Mode Operations

Listening to the radio
1. Press the [SRC] button and select the radio mode, then the radio will be on. 2. To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as: FM1 FM2 FM3 AM FM1. ] lever upward or downward , 3. Press the [ to tune in the desired station.

Adjusting MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
The factory default setting is off.
1. Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EX effect. M-BASS EX ON lights in the display. 2. Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX effect. M-BASS EX OFF lights in the display.

Seek tuning

1. Press the [BND] button and select the desired band (FM or AM).
If MANU is lit in the display, press and hold the [BND] button for 1 second or longer. MANU in the display goes off and seek tuning is now available.
, ] lever upward or downward 2. Press the [ to start automatic station tuning. When the lever is pressed upward, search will be performing in the direction of higher frequencies. When the lever is pressed downward, search will be performed in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (FM or AM).
If MANU is not lit in the display, press and hold the [BND] button for 1 second or longer. MANU is lit in the display and manual tuning is now available.

2. Tune into a station.

] lever upward or downward , Press the [ and hold in position for 1 second or longer to begin station tuning.

Quick tuning:

Step tuning:
] lever upward or downward , Press the [ to perform manual tuning.
A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station.
Recalling a preset station

Preset memory function

Preset memory function can store up to 24 stations: six stations for each of FM1, FM2, FM3 and AM.
Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.

Manual memory function

2. Press the [ station. ,
1. Press the [BND] button, to select a band you want to store in the memory. ] lever to tune into a desired
Instant station recall (ISR)

Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.
3. Press and hold one of the [DIRECT] button for 2 seconds or longer to store the current station into preset memory.

ISR memory

1. Select the station that you wish to store in ISR memory. 2. Press and hold the [ISR] button for 2 seconds or longer. In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. ISR and its frequency appear in the display. Press the [ISR] button again to return to the previous mode.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press and hold the [ PS/AS ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
Recalling a station with ISR

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [PS/AS] button. 2. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station.
Note: Be careful not to press and hold the [PS/AS] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
CD/MP3/WMA Mode Operations

What is MP3?

MP3 is an audio compression method and classied into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 12 percent of its initial size with a high quality sound. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
Logical format (File system)
1. When writing MP3/WMA le on a CD-R disc or CD-RW disc, please select ISO9660 level 1, 2 or JOLIET or Romeo as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 3. Do not afx a name to a le inside a folder having the same name.

What is WMA?

MP3/WMA disc

CD/MP3/WMA Mode Operations Selecting a track

Track-up

] lever upward to move to the 1. Press the [ beginning of the next track. ] lever is pressed upward, 2. Each time the [ playback proceeds to another track in the advancing direction.
Example of a mediums folder/le hierarchy

Track-down

] lever downward to move the 1. Press the [ beginning of the current track. ] lever downward twice to move 2. Press the [ to the beginning of the previous track.
Fast-forward/fast-backward
] lever upward and hold in position for Press the [ 1 second or longer.

Fast-forward

Fast-backward
] lever downward and hold in posiPress the [ tion for 1 second or longer.
For MP3/WMA discs, it takes some time until the start of searching and between tracks. In addition, the playing time may have a margin of error.

Folder select

When selected for play folder up down functions, les and folders are accessed in the order in which they were written by the CD-ROM writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA are to be played by writing them onto a medium such as a CD-R with their le names beginning with play sequence numbers such as 01 to 99, depending on your CD writer. For example, a medium with the following folder/ le hierarchy is shown below.

MP3/WMA playing order

This function allows you to select a folder containing MP3/WMA les and start playing from the rst track in the folder. 1. Press the [DN] or the [UP] button. Press the [DN] button to move the previous folder. Press the [UP] button to move the next folder.
Press the [UP] button while in the nal folder to shift to the rst folder. Folder without an MP3/WMA file is not selectable.

Random play

This function allows you to play all tracks recorded on a disc in a random order. 1. Press the [RDM] button to perform random play. RDM appears in the display.
2. To select a track, press the [ upward or downward.
The top function resets the CD player to the rst track of the disc. Press the [BND] button to play the rst track (Track No. 1) on the disc.
In case of MP3/WMA, the rst track of a folder being played will be returned.

Top function

Folder random play
This function allows you to play all the tracks of all the folders recorded on an MP3/WMA disc in a random order. 1. Press and hold the [RDM] button for 1 second or longer to perform folder random play. RDM appears in the display.

Other various play functions

Scan play

This function allows you to locate and play the rst 10 seconds of all the tracks recorded on a disc. 1. Press the [SCN] button to perform scan play. SCN appears in the display.
Scan play starts from the next track after the track currently being played.

To cancel play

1. Press the operating button previously selected.

Folder scan play

This function allows you to locate and play the rst 10 seconds of the rst track of all the folders on an MP3/WMA disc. 1. Press and hold the [SCN] button for 1 second or longer to perform folder scan play. SCN appears in the display.
Folder scan play starts from the next track after the track currently being played.

Repeat play

This function allows you to play the current track repeatedly. 1. Press the [RPT] button to perform repeat play. RPT appears in the display.

Folder repeat play

This function allows you to play a track currently being played in the MP3/WMA folder repeatedly. 1. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. RPT appears in the display.
Operations Common to Each Mode
To change display setting
1. Press and hold the [D] button for 1 second or longer to switch to the adjustment selection display. , ] lever upward or downward 2. Press the [ to select the item name. CLOCK Push ENT SCREEN SVR Push ENT MSG INPUT Push ENT AUTO SCROLL DIMMER CONTRAST 3. Turn the [ROTARY] knob to select the desired setting value.
After completing settings, press the [D] button to return to the previous mode.
3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ ROTARY ] knob, the setting changes in the following order: Pattern OFF MESSAGE Pattern SS Pattern
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.
The factory default setting is WELCOME TO CLARION.

Setting the clock

2-1. Select 3-1. Press the [
CLOCK Push ENT. ] button.
] lever upward or , 3-2. Press the [ downward to select the hour or the minute. 3-3. Turn the [ROTARY] knob to set the correct time.
The clock is displayed in 12-hour format.
2-1. Select MSG INPUT Push ENT. 3-1. Press the [ ] button. 3-2. Press and hold [BND] button for 1 second or longer to clear the old message. ] lever upward or down3-3. Press the [ , ward to move the cursor. 3-4. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders: Capital letters Small letters Numbers/ Symbols Umlaut Capital letters. 3-5. Turn the [ROTARY] knob to select the desired character. 3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message. 3-7. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message mode.

Press and hold the [BND] button for 1 second or longer to cancel the input message. Then ] button for 2 seconds press and hold the [ or longer to store the message and the message return to default setting.

3-4. Press the [ memory.

] button to store the time into
Note: You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the cars battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on and off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
The factory default setting is Pattern SS.
Setting the method for title scroll
The factory default setting is ON.
Set how to scroll in CD-TEXT, MP3/WMA title. 2-1. Select AUTO SCROLL. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON:

To scroll automatically.

2-1. Select

SCREEN SVR Push ENT.

To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer.
This feature allows you to slow down the scroll speed when the scroll speed is too fast, making it difcult to view the screen.
The factory default setting is SPEED 3
Adjusting the display scroll speed
The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.
The factory default setting is OFF.

Anti-theft indicator

SCRL SPEED.

BLINK LED.

3-1.Turn the [ROTARY] knob to select the setting.
This setting item can be adjusted within the range SPEED 1 to SPEED 6. Adjust this setting item while viewing how the appearance of the display changes.
3-1. Turn the [ROTARY] knob to select ON or OFF.
Setting the external amplier

AMP CANCEL.

Dimmer control
You can setting the dimmer control ON or OFF.
3-1. Turn the [ROTARY] knob to select ON or OFF. ON:

Use with connected AMP.

DIMMER.

Use with inside AMP.

Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
The factory default setting is 08. (Adjustment level: 01 to 16)
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difcult to hear even after adjusting the volume.

The factory default setting is MID.
Selecting AUX IN sensitivity

CONTRAST.

3-1. Turn the [ ROTARY ] knob to adjust the contrast.
2-1. Select AUX SENS. 3-1. Turn the [ROTARY] knob to select LOW, MID or HIGH.

To change other settings

Triggered audio mute for cellular telephones
1. Press the [ ADJ ] button to switch to the adjustment selection display. , ] lever upward or down2. Press the [ ward to select the item name. , ] lever is pressed Each time the [ up/down, the item display changes in the following order: BLINK LED AUX SENS AMP CANCEL SYSTEM CHECK Push ENT
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
Performing a system check
3. Turn the [ROTARY] knob to select the desired setting item.
After completing settings, press the [ADJ] button to return to the previous mode.
This function allows you to perform a system check from the adjust mode when required. 2-1. Select SYSTEM CHECK Push ENT. ] button for 1 second 3-1. Press and hold the [ or longer.
SYSTEM CHECK appears in the display, then the unit returns to the previous operation mode.
Operations Common to Each Mode Entering titles
Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.

Clearing titles

1. Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to clear the title. 2. Press the [ D ] button and display the title display. 3. Press and hold the [T] button for 1 second or longer. The display switches to the title input display. 4. Press and hold the [BND] button for 1 second or longer. All characters in the title disappear. 5. Press and hold the [ ] button for 2 seconds or longer to clear the title and cancel title input mode.
CD mode TV mode Tuner mode

Number of titles

50 titles 20 titles 30 titles

CD changer mode

DCZ625 connected CDC655Tz connected

100 titles 100 titles

1. Press the [SRC] button to select the mode you want to enter a title (TUNER, CD, CD changer or TV). 2. Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to enter the title. 3. Press the [ D ] button and display the title display. 4. Press and hold the [T] button for 1 second or longer. The display switches to the title input display. ] lever upward or downward 5. Press the [ , to move the cursor. 6. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following order: Capital letters Small letters Numbers/ Symbols Umlaut Capital letters. 7. Turn the [ROTARY] knob to select the desired character. 8. Repeat steps 5 to 7 to enter up to 10 characters for the title. ] button for 2 seconds 9. Press and hold the [ or longer to store the title into memory and cancel title input mode.

AUX function

This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.
9. OPERATIONS OF ACCESSORIES

CD Changer Operations

Note: The following operations are the same as for CD mode: Pause Track selection Fast-forward/fast-backward Scan play Repeat play Random play See CD/MP3/WMA Mode Operations (page 1620) for details.
This unit can display title data for CD-text CDs and user titles input with this unit.
Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz.
1. Press the [D] button to display the title. 2. Each time you press the [T] button, the title display changes in the following order:
When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [SRC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [SRC] button to select the CD changer for play. If NO MAGAZINE appears in the display, insert the magazine into the CD changer. DISC CHECK appears in the display while the player loads (checks) the magazine. If NO DISC appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.
Note: Some CDs recorded in CD-R/CD-RW mode may not be usable.

CD changer functions

Notes: If the CD playing is not a CD-text CD or no user title has been input, U NO TITLE appears in the display. If a CD-text CD is not input its disc title or a track title, O NO TITLE or NO TITLE appears in the display.
Procedure to scroll a title
Set AUTO SCROLL to ON or OFF. (The factory default setting is ON. Refer to the subsection Turning the screen saver function on or off in section Operation common to each mode.) When set to ON
The title is automatically kept scrolling.
CD-ROM discs cannot be played from every CD changer, its depended on the model.

When set to OFF

Selecting a CD
Press the [UP] or [DN] button to select the desired disc.
If a CD is not loaded in a slot of magazine, pressing the [UP] or [DN] button can not work.

4. Turn the [ROTARY] knob to select the reception area. 5. Press the [ ] button. 6. Press the [ADJ] button to return to the previous mode.

Setting the TV diver

You can change the reception setting for the TV antenna connected to the TV tuner. 1. Press the [ ADJ ] button to switch to the adjustment selection display. , ] lever upward or downward 2. Press the [ to select TV DIVER. 3. Turn the [ROTARY] knob clockwise to set to ON or counterclockwise to set to OFF.
Sets the diver setting to ON.
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the previous mode.

10. TROUBLESHOOTING

Problem Power does not turn on. (No sound is produced) Cause Fuse is blown. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn the unit back on. 4. Reconnect each amplier remote wire to the power antenna lead one by one. If the ampliers turn off before all wires are attached, use an external relay to provide remote-on voltage ( excessive current required). Turn off the power, then press the [OPEN] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. 1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). 2. If the sound is muted again, consult our service department.
Incorrect wiring. No sound output when operating the unit with ampliers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the ampliers or power antenna.

General

Nothing happens when button are pressed. Display is not accurate.
The microprocessor has malfunctioned due to noise, etc. DCP or main unit connectors are dirty.

No sound heard.

The speaker protection circuit is operating.

Troubleshooting

CD/MP3/WMA

English 28

Problem No sound heard.
Cause MP3/WMA les are absent in a disc. Files are not recognized as an MP3/WMA le. File system is not correct.
Measure Write MP3/WMA les onto the disc properly. Use MP3/WMA les encoded properly. Use ISO9660 level 1, 2 or JOLIET or Romeo le system. Clean the disc with a soft cloth. Replace with a disc with no scratches. Use MP3/WMA les encoded properly.

Sound skips or is noisy.

Disc is dirty. Disc is heavily scratched or warped.

AM tuner

Frequency Range: AM 531 kHz to 1629 kHz Usable Sensitivity: 25 V

CD player

System: Compact disc audio system Usable Discs: Compact disc Frequency Response: 10 Hz to 20 kHz (1 dB) Signal-to-Noise Ratio: 85 dB (1 kHz) IHF-A Dynamic Range: 80 dB (1 kHz) Harmonic Distortion: 0.01%
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 (4 to 8 allowable) Weight: 2.42 lb. (1.1 kg) Dimensions: 178 mm Width X 50 mm Height X 152 mm Depth
Decode Format: MPEG 1,2 and 2.5 -Layer 3 Sampling rate (kHz): MPEG-1: 32,44.1,48 MPEG-2: 16,22.05,24 MPEG-2.5: 8,11.025,12 Bit-rate (kbps): 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, 320, VBR CD-ROM Format: ISO9660 Level 1, 2, Romeo and Joliet Folder Level Limit: 8 Level Folder Support: 255 File Support: 512 Folder Name: Maximum 64 bytes File Name: Maximum 64 bytes
Notes: Specications comply with JEITA Standards. Specications and design are subject to change without notice for further improvement. Please make sure when connecting external power amplier, that you properly, to the car chassis, ground the amplier. If this is not done, severe damage to the source unit may happen.

Main Units

Experience this sound, witness the future.
The latest in audio technology, together with our commitment to usability and safety, are condensed into mere 1-DIN dimensions. Clarion units are the ultimate, offering everything wanted in a next-generation main unit; from the unwavering commitment to high fidelity sound, as well as compatibility with new media and mobile tools. Optimedia Display defines conventional wisdom. Clarions 2006 main unit lineup will appeal to the drivers sense of superiority, offering next-generation functions and performance to reshape the in-car musical experience of a new generation of users.
True Sound Technology Allows Accurate Sonic Reproduction that Re-creates the Excitement of a Concert
In 1996, Clarions DRX9255 source unit became legendary because it faithfully reproduced the digital signals encoded on CDs. The new high-end HXD2 carries on the tradition of the DRX9255; it is equally capable of faithfully reproducing the original digital sound. The foundation of the HXD2s high-definition sound is its Digital-to-Analog converter, which operates at a sampling rate of 96 kHz. This double oversampling allows reproduction of the subtle details and depth
Leading-edge intelligent functions transform the car into the ultimate acoustic space.
Optimedia Display is a new style of GUI (graphical user interface) offering vastly improved usability and safety. Keeping the number of buttons and knobs at a bare minimum, control is gained via the display panel. The panel responds
Compatibility with a wide range of media & devices extends the possibilities of future car audio
It goes without saying that disc media such as audio CD and CD-R/RW are supported, but smart collaboration with a wide range of compressed audio media such as MP3/WMA, as well as compatibility with the portable audio standard-setter iPod opens up whole new possibilities for driving enjoyment. Furthermore, the
immediately and accurately to your commands you just touch or slide your finger across the panel for intuitive control of various modes and functions. High-end main units feature a black faceplate that adds a cool look to the touch-activated intelligent functions.
2006 lineup can connect to SD cards or USB devices, and supports playback of MP3/WMA files directly from USB memory or USB players as well as standard MP3/WMA playback. You can now enjoy the flexibility and wide ranging possibilities that the latest music devices and media formats can provide, both inside and outside your car.
contained in upper-frequency harmonics. These details produce the expressiveness and resonance of real sound that cannot be done at a sampling rate of 44.1 kHz. In addition, the HXD2 uses only high-quality components such as a copper-coated chassis, wiring, output cables, and a glass-epoxy four-layer circuit board. These components prevent signal degradation and ensure superior performance. The HXD2 is the pinnacle of car-audio excellence; it reproduces the atmosphere and nuances of recordings so clearly and accurately you can hear the musicians breathing.
Redefining the term digitally remastered: Optimedia display
Offering a 24-bit D/A converter, a high-power MOS-FET amplifier, Clarions Optimedia display technology, a 4.2-inch Multicolour TFT display, and an attractive metal tone faceplate, the DXZ866MP really does look as good as it sounds. Loaded with sound-enhancement features, such as Clarions Anti Distortion Filter and 2-band parametric EQ, the DXZ866MP puts you in control of your sound. This is a main unit that truly does it all.

DXZ866MP

CD/MP3/WMA RECEIVER / CeNET & TOUCH PANEL CONTROL

OPTIMEDIA

DISPLAY
Optimedia display: 4.2-inch 256-colour full dot TFT LCD DF(Anti Distortion Filter) A Touch panel control 2-band parametric equaliser Low-pass filter 4-bit D/A converter FM, 6 AM station presets DSP tuner with variable bandwidth 4-channel 53 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready Auto dimmer with sensor Adjustable display contrast Wallpaper and screensaver Spectrum analyser CeNET Control of: DVD changer(easy), TV tuner, 6-disc CD changer 4-volt/6-channel RCA output 2-channel AUX input with level control CeNET iPod interface compatible
CEA 2006 Power Ratings 22W x 4RMS [4@14.4V 1% THD+N] S/N 88dB (Ref:1W into 4)

Detachable control panel

Motorised sloping console

Rotary volume control

Optimedia display
The DXZ866MP offers Clarions next-generation Optimedia display technology a feature that blends impeccable graphics with touch-screen control. Remastered, Optimedia display has evolved from its firstgeneration monochrome look to full colour in 2006. We didnt stop there, however. The motion graphics this technology offers are vastly improved, and the revamped onscreen layouts make navigating through the units menu screens easy. For unparalleled looks and control. Optimedia display.

Normal filter

Sound enhancement but original wave form feature was changed
Anti-Distortion Filter (ADF)
Sound enhancement with maintained original wave form feature
ADF (Anti Distortion Filter)

Normal Filter

Input Output
Dont let sound-hindering factors such as road noise and rushing wind get in the way of great sound. Because the vehicle tends to make it difficult to hear high and low frequencies, Clarion outfits its highend main units with an Anti Distortion Filter. This filter eliminates mutual phase distortion that can occur, and emphasises the natural frequency characteristics of the sound. The result is crystal clear, high-quality sound reproduction.

+10 +0 -10

AP Full

LPF (Low-Pass Filter)

-20 -30 -40 -50 -60 24dB 200 12dB 500 Freq.Hz 1K 24dB 2K 5K 12dB 10K 20k

L.Pass

For optimal subwoofer performance, Clarion equips its DXZ866MP with a built-in Low-Pass Filter. Offering users selectable frequencies at 50 Hz, 80 Hz, and 120 Hz, Clarions Low-Pass Filter stops mid- and highrange frequencies from entering the subwoofer output. This allows users to really dial in the bass so it hits harder, tighter and cleaner.
Around the MOS-FETs centrally located S-GND, the power and GND are both separated into L-ch and R-ch, and the Power IC is driven separately.
Separate power IC MOS-FET structure image

MOS-FET power amplifier

Theres only one way for Clarions DXZ866MP to deliver W of unyielding power output and superior linearity: MOS-FET amplification, also known as Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, this MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. So crank it up, or turn it down for easy listening. Either way, with MOS-FET amplification, your music has never sounded quite like this.

CD format quantisation

24-bit DAC quantisation

24-bit D/A converter

A key component in the transfer of digital data from a CD into analogue sound is Clarions 24-bit D/A converter. Because the digital realm is made up of unnaturally square sound waves, as opposed to the smoothly undulating sound waves characteristic of the real-world environment, Clarions embedded 24-bit D/A converter recreates the natural nuances and expressions lost during the sound reproduction process.

Screensaver

Day & Night

DXZ866MP System Plan

Wallpaper

SRS1686

APX4360 SRR6986

Spectrum analyser

PXW1552 RCA line Speaker line

APX2180

Overwhelming power of expression set free by the super-high definition display
Equipped with the industrys first fully Integrated full-dot high-definition 16-grade greyscale VFD, the DXZ766MP expresses both text and moving pictures in super-high definition. The fashionable radiance of the unit combined with high-definition sound creates a sophisticated car audio-visual space. The unit is fully equipped with a 24-bit D/A converter, which faithfully expresses every nuance of the digital source sounds on recorded CDs, Z-Enhancer, which you can use to alter the sounds to suit your favourite taste in music, and 4V 6-channel output terminals, which extend the realms of in-car entertainment excellence.

DXZ766MP

CD/MP3/WMA RECEIVER/CeNET CONTROL
Z-Enhancer sound customisation Low-pass filter 18 FM/6 AM station presets 4-channel x 53 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready FI VFD (Fully Integrated 16-gradation full dot VF display) (256 x 64 dot) 728-variable colour illuminated keys Screensaver CeNET control of: DVD changer (easy), TV tuner, 6-disc CD changer 4-volt/6channel RCA output 2-channel AUX input with level control CeNET iPod interface compatible
CEA 2006 Power Ratings 19W x 4RMS [4@14.4V 1% THD+N] S/N 81dB (Ref:1W into 4)
FI VFD (Fully Integrated full dot vacuum fluorescent display)
Equipped with a high-definition full-dot display that clearly and distinctly displays letters, numbers and graphics. Text display and advanced motion picture displays are speedily and beautifully projected thanks to the easy-to-see 16-grade greyscale and warm graphic expression.

Smart control & retractable rotary volume control
Much more ergonomic and intuitive than buttons,this control lets you adjust the volume with analogue type flexibility. Its just another way Clarion helps you keep your eyes on the road while keeping your ears entertained.
For optimal subwoofer performance, Clarion equips its DXZ766MP with a built-in Low-Pass Filter. Offering users selectable frequencies at 50 Hz, 80 Hz, and 120 Hz, Clarions Low-Pass Filter stops mid- and high-range frequencies from entering the subwoofer output. This allows users to really dial in the bass so it hits harder, tighter and cleaner.
Stylish collaboration of sound and light
Thanks to the high-definition 16-tone scale full-dot VFD and 728-variable colour brilliant key illumination, text and graphics are vividly projected onto the DXZ666MP. The motorised sloping console is designed in consideration of space-saving and overall car interior design. Along with the smart control, which allows volume control or track changing, the DXZ666MP features added fashion and operability and crystal clear high-definition sounds.
Z-Enhancer sound customisation 18 FM/6 AM station presets 4-channel x 53 watts of MOS-FET amplification MP3 and WMA compatible with ID3TAG display CD-R/RW ready 16-gradation Full dot VF display (114 x 32 dot + 88 icon) 728-variable colour illuminated keys Spectrum analyser Screensaver CeNET control of: DVD changer (easy), TV tuner, 6-disc CD changer 4-channel RCA output 2-channel AUX input with level control CeNET iPod interface compatible

DXZ666MP

Multicolour buttons
The 2006 Clarion range offers three main units with which you can adjust the RGB levels to cosmetically harmonise the colour design of keys with your cars dashboard illumination. You can choose between 728 different colour possibilities to perfectly match your preferences.

Smart control key

Whether its a regular CD or a hefty collection of MP3/WMA songs, this function lets you quickly and easily access the exact song you want to hear r egardless of the recorded media.
212 watts MOS-FET power amplifier
Theres only one way for Clarions DXZ666MP to deliver 4-channel x 53 watts of unyielding power output and superior linearity: MOS-FET amplification, or, otherwise known as Metal Oxide Semiconductor Field Effect Transmitter amplification. Smaller and more efficient than conventional power supplies, this MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. So crank it up, or turn it down for easy listening. Either way, with MOS-FET amplification, your music has never sounded quite like this.

Equipped with a USB port for extended musical style and expression
The DB566USB features intrepid design and sharp impression wrapped up in a single main unit. You can now enjoy your favourite MP3/WMA format music files played directly from USB memory players thanks to the incorporation of a USB port. Compatibility with a wide range of media seamlessly extends your enjoyment of music. Furthermore, the employment of amazing audio technology such as the Z-Enhancer, which allows you to choose your favourite type of sounds to suit your musical tastes, and Magna Bass EX, which delivers profound, clear bass, helps the DB566USB to achieve a truly impressive quality of sound.

DB566USB

CD/USB/MP3/WMA RECEIVER
USB slot on front escutcheon Z-Enhancer sound customisation 18 FM, 6 AM station presets 4-channel x 50 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready High contrast white negative display (13 x 8 digits) with screensaver 4-channel RCA output 2-channel AUX input Detachable control panel

USB interface

You can now connect all kinds of peripheral equipment using the common USB (Universal Serial Bus) standard interface. By connecting a mobile audio player directly to the USB connector, you can enjoy all of your MP3/WMA format music files through the car audio system. The system supports a maximum of 255 files, 255 folders, 28 character file names and 16character folder names.
Rotary volume control Magna Bass's centre Frequency is 60 Hz 100 Hz - 200 Hz

USB slot

Magna Bass EX

M-Bass EX

0 -10000
X Bass boost/M-Bass On Normal M-Bass On
Compared to conventional loudness features,which boost the low frequency range of 100 Hz, Magna Bass boosts the ultra-low frequency range with a centre frequency of around 60 Hz. For additional bass response, Clarion has added Magna Bass EX, which goes beyond Magna Bass by boosting the ultra-low frequency range centered around 60 Hz. This feature also reduces noise thanks to its automatic compensation function, which produces well-balanced, dynamic bass sound no matter how loud you play the music.

Z-Enhancer

TREBLE

Pattern1

Pattern2
Three types of sound quality patterns are pre-set for easy selection. Boost the bass only, the treble only, or both, with the level of boost adjustable by the user.

Pattern3

Bold black face equipped with a high-detail full dot LCD
The flip-down panel on the DXZ466MP features a sophisticated black face design. It has an exceptionally bright, high-definition full-dot LCD to enable reading in any situation. It displays valuable information, such as playback status, artist name and various other information. Moreover, the unit offers outstanding sound quality thanks to features such as the Z-Enhancer, which is used to adjust the sound to suit your own personal taste, Magna Bass EX, which powerfully and faithfully reproduces clear bass, and an internal high-power MOS-FET amplifier with an output of watts. Whats more, it has 4-channel RCA (2 front channels + 2 rear channels) output, making it a truly versatile main unit with lots of possibilities for system expansion.

DXZ466MP

Z-Enhancer sound customisation 18 FM, 6 AM station presets 4-channel x 52 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready Full dot LCD (160 x 48 dot) Adjustable display contrast Screensaver CeNET Control of: TV tuner, 6-disc CD changer 4-channel RCA output 2-channel AUX input with level control CeNET iPod interface compatible
208W MOS-FET power amplifier

Flip down console

Theres only one way for Clarions DXZ466MP to deliver 4-channel x 52 watts of unyielding power output and superior linearity: MOS-FET amplification, or, otherwise known as Metal Oxide Semiconductor Field Effect Transmitter amplification. Smaller and more efficient than conventional power supplies, this MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. So crank it up, or turn it down for easy listening. Either way, with MOS-FET amplification, your music has never sounded quite like this.
Retractable rotary volume and smart control
Negative 2-line LCD 2-line-display supports MP3 and WMA audio formats
A stylish, easy-to-view 2-line LC display with a blue background and source icons placed on the left side provides the ultimate, easy-to-use and easy-to-read experience. Furthermore, support for MP3 and WMA audio formats enables you to store and listen to more than 100 tunes on a single CD-R/RW disc, thus making long drives enjoyable and comfortable.

Message Information

Personalize your main units display screen by adding your own text message. For added effect, this feature also allows your message to scroll across the screen. Use this feature as a bulletin board for your vehicle, or utilize it as a memo pad.
Intense black form that sets the energy of the original sound free
The DB266MP, and DB166 main units give you the feeling of a solid, intense black form presence in the cockpit that is combined with high performance. Both models are equipped with the Z-Enhancer, which allows you to set 3 equalizing patterns that emphasize the full range of bass and treble tones while still maintaining a good balance of sound. The units also incorporate Magna Bass EX, which compensates for high volume by applying a weaker boost and low volume by applying a stronger boost, delivering dynamic bass to your favourite music. Clarion has accumulated unique technology that is able to break through the barriers that the in-car environment presents to produce the finest high-quality sound.

DB266MP

CD/MP3 RECEIVER

MP3, WMA and ID3-TAG

Both models handle MP3 and WMA digital audio files, and both support ID3-TAG coding for display of title info. Because both MP3 and WMA files are compressed, each CD-R or CD-RW can hold up to 12 hours of music with CD sound quality.
Z-Enhancer sound customisation 18 FM, 6 AM station presets 4-channel x 45 watts amplification MP3 compatible with ID3-TAG display CD-R/RW ready High contrast blue negative display (13 x 8 digits) with Screensaver 2-channel RCA output
CEA 2006 Power Ratings 19W x 4RMS [4@14.4V 1% THD+N] S/N 80dB (Ref:1W into 4)
Z-Enhancer acts as a super loudness compensation EQ, providing users with three selectable listening patterns.The first adds more bass, the second adds more treble, and third does both.

Rotary Volume Control

Detachable Control Panel
Z-Enhancer sound customisation 18 FM, 6 AM station presets 4-channel x 45 watts amplification CD-R/RW ready High contrast blue negative display (13 x 8 digits) with Screensaver 2-channel RCA output

CD RECEIVER

System example based on DB266MP or DB166
This simple audio system delivers plenty of bang for buck. Phaze One speakers deliver full-range audio to your vehicles interior, while the combined power of the APX1300 & SB series woofer produce clean, punchy bass.

DB266MP System Plan

SRR1616

SRR6946

RCA line Speaker line

APX1300

SB12XB
With brushed metal finish, the boldly noticeable faceplate is divided into five sections, with control knobs that offer superior usability laid out on its surface. Clarions WXZ466MP offers unprecedented presence as a high quality audio component. The graphical image offered by the 23-band spectrum analyser puts a finishing touch on this powerful 6 CD unit. Design is made to satisfy sense expectation. Enjoy double sized design with this original product. More and more cars offer large installation space in their dashboard.

The essence of audio is alive in its design

WXZ466MP

2-DIN 6-DISC CD/MP3/WMA RECEIVER / CeNET CONTROL

setting

Listening Position Optimiser (LPO)
The WXZ466MPs Listening Position Optimiser uses digital processing to virtually adjust the speaker distance, enabling sound stage settings to accommodate a wide variety of different types of vehicles. So no matter what type of car you drive, you can count on Clarion to drive your sound with high precision and realistic presence.
Right Distance Sample 10cm 13 40cm 52 10cm 13 80cm 104 10cm 13 160cm 208 Left Distance Sample 40cm 52 10cm 13 80cm 104 10cm 13 160cm 208 10cm 13
18FM, 6AM station presets 4-channel x 50 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready VF display with Spectrum analyser and Screensaver CATS: Theft prevention system with personal code CeNET Control of: DVD changer (easy), TV tuner, 6-disc CD changer 4channel RCA output 2-channel AUX input with level control CeNET iPod interface compatible
LPO 1 for compact car seat position LPO 2 for sedan LPO 3 for 1box car

R L R L R L

Digital Z-Enhancer
Built-in 6-disc CD changer & MP3/WMA file playback
Clarions Digital-Z Enhancer controls P-EQ, HPF, and LPF through the DSP, allowing you to select from three equalising patterns that emphasise the range of tones in the upper/base regions respectively while maintaining perfect acoustic balance. Furthermore, by adding gain adjustment (HI, MID, LOW) to the 3 equalising patterns, it is now possible to choose from 9 different equalising patterns to customise the sound quality pattern so that it matches your speaker system or music source perfectly.
You can load up to 6 discs in the units internal CD changer so youll probably never run out of music on your drives. In addition to music CDs and MP3 files, the changer also supports WMA files which offer superior compression while maintaining high quality, making it possible to fit the equivalent of full CD library on a single CD-R at comparable quality. ID3/WMA tags are supported to display a wide range of information on the tunes being played.
DZE1- High DZE1- Mid DZE1- Low DZE - Off
DZE2- High DZE2- Mid DZE2- Low DZE - Off
DZE3- High DZE3- Mid DZE3- Low DZE - Off
An image of urban nights through the refinement of light and form
Furnished with a sharp, strikingly designed front panel. Vivid brightness and lustre created by the 728 variable colour LED creates an image of city illuminations at night. Moreover, as the DFZ667MC is equipped with an SD card slot enabling smooth compatibility with mobile music players, it is fully capable of seamlessly supporting your musical life in the digital age. And with the inclusion of the highly anticipated Music Catcher II, which gives you 4X high speed recording and the ability to select from four different tone quality presets, you can enjoy all the benefits of a CD changer long play function at your fingertips without having to carry around a clumsy CD storage case.

728-variable colour Screen saver Music Catcher II CD recorder and SD slot Digital Z-Enhancer Magna Bass EX dynamic bass enhancement 18FM/6AM presets 4-channel x 50 watts of MOS-FET amplification MP3 and WMA compatible with ID3-TAG display CD-R/RW ready CeNET Control of: DVD changer (easy), TV tuner, 6-disc CD changer 4-channel RCA output Front-panel auxiliary input Rotary volume control iPod ready via EA1276B (sold seperately)
Front-panel auxiliary input

DFZ667MC

2-DIN CD/SD/MP3/WMA RECEIVER/ CeNET CONTROL
Compatibility with a wide range of media
DFZ667MC can connect to SD cards devices, and supports playback of MP3/WMA files directly from memory or players as well as standard MP3/WMA playback. You can now enjoy the flexibility and wide ranging possibilities that the latest music devices and media formats can provide both inside and outside your car.
Music Catcher II 4 Times Speed digital recording
Clarions Digital Z-Enhancer controls P-EQ, and through the DSP, allowing you to select from three equalizing patterns that emphasize the range of tones in the upper/bass regions respectively while maintaining perfect acoustic balance. Furthermore, by adding gain adjustment (HI, MID, LOW) to the 3 equalizing patterns, it is now possible to choose from 9 different equalizing patterns to customize the sound quality pattern so that it matches your speaker system or music source perfectly. 30
LP Mode : About 650 minutes /13CDs STD Mode : About 500 minutes /10CDs HQ Mode : About 350 minutes / 7CDs SHQ Mode : About 250 minutes / 5CDs *1 album 50 minutes conversion
CEA 2006 Power Ratings 18W x 4RMS [4@14.4V 1% THD+N] S/N 75dB (Ref:1W into 4)
Clarions leading-edge Music Catcher II lets you record, play and erase data files holding as much music as six of your favourite CDs. Say goodbye to CD changers and storage cases. Dont drop your valuable CDs when you try to load those clumsy cartridges for your bulky old CD changer; catch on to Music Catcher.
CD & cassette model equipped with EQ and speaker patterns for the mainstream listener

ADB341MP

2-DIN CD/MP3/ CASSETTE RECEIVER

18 FM, 6 AM station presets 4-channel x 50 watts amplification 3-band graphic equaliser MP3 compatible with ID3-TAG display CD-R/RW ready Full logic tape transport Auto programme control (APC) Spectrum analyser Screensaver 2-channel RCA output 2-channel AUX input

CD loading slot

Flip down control panel
Graphic Equalizer Pattern
Spectrum Analyzer Pattern
CASSETTE RECEIVER/ C-BUS CONTROL
C-BUS 6-CD changer control Z-Enhancer Auto reverse 4-channel x 40 watts amplification 20FM, 5AM station presets Green Illumination Rotary volume control
Basic Stacker System Plan

BASS BASS

TREBLE TREBLE

C-Bus Cable

Speaker Line