Reviews & Opinions
Independent and trusted. Read before buy Clarion DXZ545MP!

Clarion DXZ545MP

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Clarion DXZ545MP, size: 893 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Clarion DXZ545MPAbout Clarion DXZ545MP
Here you can find all about Clarion DXZ545MP like manual and other informations. For example: installation manual, wiring, wiring diagram.

Clarion DXZ545MP manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Clarion DXZ545MP please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Clarion DXZ545MP photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.
Bottom View of Source Unit
Be sure to unfold and read the next page. / Veuillez dplier et vous rfrer la page suivante. Cercirese de desplegar y de leer la pgina siguiente.

+DXZ545MP-003-8

11/5/03, 5:01 PM
3.CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente

[ROTARY] [RELEASE]

4. NOMENCLATURE
Note: Be sure to read this chapter referring to the front diagrams of chapter 3. CONTROLS on page 5 (unfold).
Major button operations when external equipment is connected to this unit
When the CD/DVD changer is connected
For details, see the section CD changer operations. For the DVD changer, refer to the Owners Manual provided with the DVD changer.

English Franais Espaol

When the Sirius Satellite Radio is connected

[P/A] button

Names of the Buttons and their Functions

[CD SLOT]

For details, refer to the Owners Manual provided with the Sirius Satellite Radio.

[RELEASE] button

[PLAY LIST] button
Press and hold for 1 second or longer to turn on or off the play list mode. (MP3/WMA disc only)
Deeply push in [RELEASE] button to unlock DCP.

[DISP] button

When the button is pressed and held, switches the user titles or track titles, etc. while in the CD changer mode.
Performs category scan while in the SIRIUS mode. When the button is pressed and held, preset scan is performed.

[ROTARY] knob

[ [FNC] [A-M] [BND] ] [Z+] [ISR] [DISP]

[DIRECT] buttons

Stores a station into memory or recall it directly while in the SIRIUS mode.
Adjust the volume by turning the knob clockwise or counterclockwise. Use the knob to perform various settings.

[RDM] button

Perform random play while in the CD mode. Press and hold the button for 1 second or longer to perform folder random play while in the MP3/WMA mode.

[T] button

Use the button to input a title in the CD changer mode. Use the button to scroll the title during CD-text play.

] button

CD insertion slot.

Select a category.

[a], [d] button
Press the button to selects a station.

[Q] button

Eject a CD when it is loaded into the unit.
[a], [d] [ ] [SCN] [RPT] [RDM] [PLAY LIST] [DIRECT] [DN], [UP] [T] [P/A]

[RPT] button

Repeat play while in the CD mode. Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3/WMA mode.

[ISR] button

Recall ISR radio station in memory. Press and hold for 2 seconds or longer: Store current station into ISR memory (radio mode only). Press and hold the button for 1 second or longer to switch the main and sub zone sound source. (only while 2-ZONE mode on)
Play or pause a CD while in the CD mode.

[a], [d] buttons

Select a station while in the radio mode or select a track when listening to a CD. These buttons are used to make various settings. Press and hold the button for 1 second or longer to switch the fast-forward/fast-backward.

[BND] button

Move the next disc in increasing order.
Play or pause a CD or DVD.
Select a track when listening to a disc. Press and hold the button for 1 second or longer to switch the fast-forward/fast-backward.
Switch the display indication (Main display, Clock display).
Switch the band, or seek tuning or manual tuning while in the radio mode. Play a first track while in the CD mode.

When the TV is connected

For details, see the section TV operations.
Use the button to input a title in the Tuner, CD mode. Press and hold the button for 1 second or longer to enter the adjust mode.

[A-M] button

Use the button to switch to the audio mode (bass/treble, balance/fader Z-Enhancer Plus) Press and hold for 1 second or longer to turn on or off the MAGNA BASS EXTENED.
Perform preset scan while in the TV mode. When the button is pressed and held, auto store is performed.
Perform preset scan while in the radio mode. When the button is pressed and held, auto store is performed.
Store a station into memory or recall it directly.
Press the button to turn on the power. Press and hold the button for 1second or longer to turn off the power. Switches the operation mode among the radio mode, etc.
Switch the TV picture mode or VTR (external) picture mode.
Select the Folder. (MP3/WMA disc only)

Select a station.

Store a station into memory or recall it directly while in the radio mode.

Note:Be sure to read this chapter referring to the front diagrams of chapter 3. CONTROLS on page 5 (unfold).

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
The volume level is from 0 (minimum) to 33 (maximum).

Switching the display

Press the [DISP] button to select the desired display. Each time you press the [DISP] button, the display switches in the following order: Main display Clock display Main display.
Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functions display, then revert back to the preferred display several seconds after the adjustment. When you have entered a title in a CD, it appears in the main display. If you have not entered a title, NO TITLE appears in the title display instead. For information on how to enter a title, refer to the subsection Entering titles in section Operations Common to Each Mode.

Turning on/off the power

Note: Be careful about using this unit for a long time without running the engine. If you drain the cars battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [FNC] button.
2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode. 3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit. Note: System check The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, SYSTEM CHK and Push POWER appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.
Setting the Z-Enhancer Plus
This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.
The factory default setting is Z+ OFF.

Selecting a mode

1. Press the [FNC] button to change the operation mode. 2. Each time you press the [FNC] button, the operation mode changes in the following order: Radio mode SIRIUS mode CD/MP3/ WMA mode CD changer mode DVD changer mode TV mode AUX mode Radio mode.
External equipment not connected with CeNET is not displayed.
Each time you press the [Z+] button, the tone effect changes in the following order: Z+ OFF BASS BOOST IMPACT EXCITE CUSTOM Z+ OFF. BASS BOOST : bass emphasized IMPACT : bass and treble emphasized EXCITE : bass and treble emphasized mid de-emphasized CUSTOM : user custom Z+ OFF : no sound effect

Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot. Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.
Notes: Never insert foreign objects into the CD SLOT. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the or mark and CD-ROMs cannot be played by this unit. Some CDs recorded in CD-R/CD-RW mode may not be usable. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the center of the insertion slot.

Backup Eject function

Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on. Press the [Q] button, then the CD will be ejected. Note: If the ejected CD is left as it is, it will be reloaded after 15 seconds. However, single CDs will not be reloaded, so make sure to remove them.

Pausing play

1. Press the [ ] button to pause play. PAUSE appears in the display. 2. To resume CD play, press the [ again. ] button

Displaying CD titles

This unit can display title data for CD-text/MP3/ WMA disc and user titles input with this unit. 1. Press the [DISP] button to display the title. 2. Each time you press and hold the [DISP] button for 1 second or longer, the title display changes in the following order:
Listening to a disc already loaded in the unit
Press the [FNC] button to select the CD/MP3/ WMA mode. When the unit enters the CD/MP3/WMA mode, play starts automatically.
CD-TEXT disc User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc). MP3/WMA disc Folder File Album TAG Artist TAG Title TAG Folder. Notes: If the CD playing is not a CD-text CD or no user title has been input, NO TITLE appears in the display. If MP3/WMA disc is not input TAG, NO TAG appears in the display. For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. Tag displays give priority to V2.3 / 2.2 In the case of album Tags for WMA, the information written into the extension header is displayed. Only ASCII characters can be displayed in Tags.

This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc. 1. Press and hold the [PLAY LIST] button for 1 second or longer to turn on or off the play list mode.
Play list play is possible only when there is a file whose extension is.M3U or.ASX on the CDR-RW. Up to 5 play lists can be recognized, and up to 255 files can be recognized per play list.
2. Press the [a] or [d] button to change the track. 3. Press the [DN] button to move to the previous play list.
Press the [UP] button to move to the next play list. Notes: The SCN/RPT/RDM functions cannot be used while in the play list mode. The title display changes from folder name to play list name.
Different pieces of music heard by plural listeners (2-ZONE function)
About the 2-ZONE function
The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural listeners to enjoy separate music sources. This unit can control its internal sources (radio, CD, MP3, etc.) to play back them, and further, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.). The sources of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone systems (WH104/WH204). Notes: Except AUX, the MAIN and SUB zones cannot simultaneously use sources inside this unit. Also, external equipment connected via CeNET cannot simultaneously be used. The TV mode while the 2-ZONE function is tuned on is forced to change to VTR playback. The ISR function cannot be operated when the 2ZONE function is turned on. The Audio mode and Z-enhancer function cannot be set for the sources of the SUB zone. If any of following external equipment is connected, this function is disenabled.
5.1 channel surround decoder (DVC920)

Making a play list

1. Write desired tracks to a CD-R/RW, etc. Be sure to use alphanumeric/ASCII characters for all file names. 2. Make a play list by using a multimedia player, etc. and save the data. The file format must be M3U or ASX. 3. Again, write this play list to the CD-R/RW, etc. Notes: When writing to a CD-R/RW, etc., be sure to use alphanumeric/ASCII characters. Up to 5 layers can be recognized as a list. For written play lists, latest 5 lists are recognized in the order in which they are written. When writing to a CD-R/RW, etc., turn off the Disc At Once function. When adding a play list, it is recommended to write it in the Root folder.
Setting the 2-ZONE function

1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select SCRN SVR. ] button. 3. Press the [ 4. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: SS OFF SS ON SS MESSAGE 5. Press the [ ] button to store the setting. 6. Press the [T] button to return to the previous mode.

2-ZONE turned on

Entering MESSAGE INFORMATION
When the use of the message is selected for the screen saver setting, you can change the contents of the message.
Up to 30 characters can be entered. The factory default setting is Welcome to Clarion.
Adjusting the sound level for the MAIN zone
You can adjust the sound level only for the MAIN zone. To adjust the sound level for the SUB zone, adjust it in the headphone (WH104/WH204) side. Turning the [ROTARY] knob to adjust the sound level for the MAIN zone.
Counterchanging the sources of the MAIN and SUB zones
You can supersede the music sources of the MAIN and SUB zones. Press and hold the [ISR] button for 1 second or longer to counterchange the sources of the MAIN and SUB zones. REVERSE is displayed for 2 seconds on the display.
1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select MSG INPUT. 3. Press the [ ] button. 4. Press the [BND] button to clear the old message. 5. Press the [a] or [d] button to move the cursor. 6. Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following orders: Capital letters Small letters Numbers and Symbols Umlaut Capital letters.
7. Turn the [ROTARY] knob to select the desired character. 8. Repeat step 5 to 7 to enter up to 30 characters for message. 9. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message. 10.Press the [T] button to return to the previous mode.
2. Press the [a] or [d] button to select DIMMER. 3. Turn the [ROTARY] knob clockwise to ON or counterclockwise to OFF. 4. Press the [T] button to return to the previous mode.

The factory default setting is MID.

Dimmer control

You can setting the dimmer control ON or OFF.
1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select AUX SENS.
3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from HIGH, MID or LOW. 4. Press the [T] button to return to the previous mode.

Setting the clock

1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select CLOCK. 3. Press the [ ] button. 4. Press the [a] or [d] button to select the hour or the minute. 5. Turn the [ROTARY] knob clockwise or counterclockwise to set the correct time.
The clock is displayed in 12-hour format.
3. Press the [DISP] button and display the main. 4. Press the [T] button. 5. Press the [a] or [d] button to move the cursor. 6. Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order: Capital letters Small letters Numbers and Symbols Umlaut Capital letters. 7. Turn the [ROTARY] knob to select the desired character. 8. Repeat steps 5 to 7 to enter up to 10 characters for the title. 9. Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode.
6. Press the [ ] button to store the time into memory. 7. Press the [T] button to return to the previous mode. Note: You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the cars battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

Clearing titles

1. Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to clear the title. 2. Press the [DISP] button and display the main. 3. Press the [T] button. The display switches to the title input display. 4. Press the [BND] button. ] button for 2 sec5. Press and hold the [ ond or longer to clear the title and cancel title input mode.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows. Mode CD mode TV mode Tuner mode CD changer mode DCZ625 connected CDC655Tz connected CDC1255z connected Number of titles 50 titles 20 titles 30 titles Number of titles 100 titles 100 titles 50 titles

This unit can display title data for CD-text CDs and user titles input with this unit.
Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz.
When connected to DCZ625 or CDC1255z Press the [DISP] button to display the title. When connected to CDC655Tz 1. Press the [DISP] button to display the title. 2. Each time you press and hold the [DISP] button for 1 second or longer, the title display changes in the following order: User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc) Notes: If the CD playing is not a CD-text CD or no user title has been input, NO TITLE appears in the display.
Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled.
The scan play is useful when you want to select a desired track.
Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. RDM lights in the display and random play begins. 2. To cancel random play, press the [RDM] button again. RDM goes off from the display and normal play resumes.
1. Press the [SCN] button to start track scanning. SCN lights in the display. 2. To cancel the scan play, press the [SCN] button again. SCN goes off from the display and the current track continues to play.

Disc random play

The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press and hold the [RDM] button for 1 second or longer. DISC and RDM light in the display and disc random play starts. 2. To cancel disc random play, press the [RDM] button again. DISC and RDM go off from the display and normal play resumes from the current track.

Disc scan play

Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer. This function continues automatically until it is cancelled.
Disc scan play is useful when you want to select a desired CD.
1. Press and hold the [SCN] button for 1 second or longer. DISC and SCN light in the display and disc scan play starts. 2. To cancel disc scan play, press the [SCN] button again. DISC and SCN go off from the display and the current track continues to play.
Repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RPT] button. RPT lights in the display and the current track is repeated. 2. To cancel repeat play, press the [RPT] button again. RPT goes off from the display and normal play resumes.

Disc repeat play

After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [RPT] button for 1 second or longer. DISC and RPT light in the display and disc repeat play starts. 2. To cancel disc repeat play, press the [RPT] button again. DISC and RPT go off from the display and normal play resumes on the current track.

TV Operations

TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. 1. Press the [BND] button and select the desired band (TV1 or TV2).
If MANU is not lit in the display, press and hold the [BND] button for 1 second or longer. MANU lights in the display and manual tuning is now available.

Watching a TV

1. Press the [FNC] button and select the TV mode. 2. Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2. 3. Press the [a] or [d] button to tune in the desired TV station.
2. Tune into a station. Quick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. Step tuning: Press the [a] or [d] button to manually tune in a station.
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). 2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Watching a video

The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [ ] button to select VTR. 2. To return to the TV broadcast, press the [ ] button.

There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning.
1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). 2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
2. Press the [a] or [d] button to automatically seek a station. Press the [d] button to automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down.
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. 1. Press the [P/A] button. 2. When the desired station is found, press the [P/A] button again to remain tuned to that station. Note: Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.

Setting the TV diver

You can change the reception setting for the TV antenna connected to the TV tuner. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select TV DIVER. 3. Turn the [ROTARY] knob clockwise to set to ON or counterclockwise to set to OFF. ON: Sets the diver setting to ON. OFF: Sets the diver setting to OFF. 4. Press the [T] button to return to the previous mode.

9. IN CASE OF DIFFICULTY

Problem Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Fuse is blown. Incorrect wiring. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn the unit back on. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required). Turn off the power, then press the [RELEASE] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod.

Reset button

General
Nothing happens when buttons are pressed. Display is not accurate.
The microprocessor has malfunctioned due to noise, etc.
DCP or source unit connectors are dirty. No sound heard The speaker protection circuit is operating.
Wipe the dirt off with a soft cloth moistened with cleaning alcohol. 1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). 2. If the sound is muted again, consult our service department. Write MP3/WMA files onto the disc properly. Use MP3/WMA files encoded properly. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Clean the compact disc with a soft cloth. Replace with a compact disc with no scratches. Use MP3/WMA files encoded properly.

No sound heard

MP3/WMA files are absent in a disc. Files are not recognized as an MP3/WMA file. File system is not correct.

Sound skips or is noisy.

Compact disc is dirty. Compact disc is heavily scratched or warped.
Sound is cut or skipped. Noise is generated or noise is mixed with sound. Sound is bad directly after power is turned on. Wrong filename Play list play is not performed.
MP3/WMA files are not encoded properly.
Water droplets may form on the internal lens when the car is parked in a humid place. File system is not correct. File name or extension is not correct.
Let dry for about 1 hour with the power on.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Use alphanumeric/ASCII characters for MP3/WMA file name. Use.M3U or.ASX for the file extension of a play list.

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.
Error Display ERROR 2 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. A CD inside the CD changer is not loaded. Measure This is a failure of CD decks mechanism and consult your store of purchase. Replace with a non-scratched, non-warped-disc. Eject the disc then reload it properly.

ERROR 3

ERROR 6

ERROR 2

CD changer
This is a failure of CD changers mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. Eject the disc then reload it properly.
A CD inside the CD changer cannot be played due to scratches, etc. A CD inside the CD changer cannot be played because it is loaded upside-down. A DISC inside the DVD changer cannot be played. A DISC cannot be played due to scratches, etc. A DISC inside the DVD changer cannot be played because it is loaded upside-down. Parental level error Region code error
This is a failure of DVD mechanism and consult your store of purchase. Retry or replace with a non-scratched, nonwarped-disc. Eject the disc then reload it properly

DVD changer

ERROR P ERROR R
Set the correct Parental level. Eject the disc and replace correct region code disc. 1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). 2. If the sound is muted again, consult our service department.

AMP GUARD

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.
The speaker protection circuit is operating. During this operation, if any volume operation is performed, the display shows AMP GUARD.

11. SPECIFICATIONS

FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (3 dB): 30 Hz to 15 kHz
Maximum Power Output: 208 W (52 W 4 ch) Continuous Average Power Output: 17 W 4, into 4 , 20 Hz to 20 kHz, 1%THD Bass Control Action (50 Hz/80 Hz/120 Hz): +16 dB, -12dB Treble Control Action (8 kHz/12 kHz): 12 dB Line Output Level (CD 1 kHz): 1.8 V
Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Current Consumption: Less than 15 A, 3A Speaker Impedance: 4 (4 to 8 allowable) Weight / Source unit: 2.86 lb. (1.3 kg) Weight / Remote control unit: 1 oz. (30 g) (including battery) Dimensions / Source unit: 7" (Width) 2" (Height) 6-1/8" (Depth) [178 (W) 50 (H) 155 (D) mm] Dimensions / Remote control unit: 1-3/4" (Width) 4-5/16" (Height) 1-1/8" (Depth) [44 (W) 110 (H) 27 (D) mm]

AM Tuner

 

Tags

VGN-FW21Z B8971-5-M ZHC9454X MX-D302 66331K-MN 74R Sdrh90 Reflexes Grandprix 2000 42PF3331 VSX-D514 Commander III Hotels TSR12 ASD-1R Photosmart 850 Monitor Mexico PRO Mozaic Dvd 8 DPF-E75 VPC-HD1000EX Ultra66 FAX4410L SCX-4828FN XIP 150 II FC8264 2018I Installation Manual KA68030A SGH-Z400 TDM-BT10 Pentax ZX60 Adapter RT-44NA10T SBG900 CDC-312 Proshade 6093 DVD 5 LE23T51B Wiring MP3135 Cavalier 2001 H1 Ztrs ICF-R100MT System Tyros2 TX-32LX70P Iden I560 Radeon X850 Macbook 4000TN EMX5000 KX-T7533NE Captureview 8X22 Verna SL605 42AD5E 953900165 KDG220J-kd-g220 KDC-W6641U XL-280 29GX1899-78R CDP-CX450 GC2227HEK5 Timex 76 DMV-PRO Advantix F600 Voiture XV-N55SL VPH1001Q DTC-790 SCD498 Desktop Printer Model 103 Highspeed 7934 RS23fcms VCE-160 Reader SMS-2P MH070fxea4B RPD552 WV-SW1 HD-FOX TDS370T BCO110 DV4100 DVD-P248A DCR-SR52E B2230H Wiring Diagram Heracles Travelmate-4150 Grill KX-TG2422 72600 DJM-700-S RSH1fbpe 200 B200 Profil Aspire 5530 7145I Gev2 Cayenne

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101