Reviews & Opinions
Independent and trusted. Read before buy Clarion DXZ668RMP!

Clarion DXZ668RMP

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Clarion DXZ668RMP, size: 2.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Clarion DXZ668RMPAbout Clarion DXZ668RMP
Here you can find all about Clarion DXZ668RMP like manual and other informations. For example: review.

Clarion DXZ668RMP manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Clarion DXZ668RMP please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Clarion DXZ668RMP photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

[TA] button

Use the button to set the TA (Traffic Announce-ment) standby mode in the DAB mode. (This function is only DAB tuner.)

1. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate. 2. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 3. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.

] button

Sloping Console
This unit uses sloping console to make largescreen displays possible. When you use the sloping console, be sure to close it.

Storage

Do not expose compact discs to direct sunlight or any heat source. Do not expose compact discs to excess humidity or dust. Do not expose compact discs to direct heat from heaters.
Perform preset scan while in the TV mode. When the button is pressed and held, auto store is performed. (This function is only TV tuner.) Perform service scan while in the DAB mode.

[, ] lever

Select a station.

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE. 1. For safetys sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key. If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close. 2. Before the SLOPING CONSOLE closes, there may be a braking sound from the safety mechanism. This is normal.

Cleaning

Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. After using special compact disc cleaner, let the compact disc dry off well before playing it.
INFORMATION FOR USERS:. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Be sure to unfold and read the next page. / Veuillez dplier et vous rfrer la page suivante. Bitte ausbreiten und die nchste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva. Volgende pagina uitvouwen en doorlezen a.u.b. / Cercirese de desplegar y de leer la pgina siguiente. Glm inte att vika ut och lsa nsta sida. / No deixe de abrir e ler a prxima pgina.

+DXZ668RMP-003-8

06.1.11, 20:32
CONTROLS / LES COMMANDES / REGLER / CONTROLLI REGELAARS / CONTROLES / KONTROLLER / CONTROLOS

3. NOMENCLATURE

Note: Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 5 (unfold).
Names of the Buttons and Their Functions
English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus

[SRC] button

Press the button to turn on the power. Press and hold the button for 1 second or longer to turn off the power. Switch the operation mode among the radio mode, etc.
Select a station while in the radio mode or select a track while in the CD/MP3/WMA mode. This lever is used to make various settings. Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.
Main unit / Appareil principal / Hauptgert / Apparecchio principale Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
[ADJ] [RELEASE] [ROTARY] [ ] [PHOTO SENSOR] [ ]

[RELEASE] button

Deeply push in the button to unlock the DCP.

[D] button

Switch the display indication (Main display, Spectrum analyzer display and CT (clock time) display). Press and hold the button for 1 second or longer (do not over 4 seconds) to enter the display adjust mode. Press and hold the button for 4 seconds or longer to turn off the display while in the usual play.

Perform random play while in the CD/MP3/ WMA mode. Press and hold the button for 1 second or longer to perform folder random play while in the MP3/WMA mode.

[RPT] button

Perform repeat play. When this button is pressed and held, disc repeat play is performed.
Play or pause a CD, DVD or iPod BB.

[T] button

Press the button, switches the user titles or track titles, etc. while in the CD changer mode. Use the button to input a title in the CD changer mode. Use the button to scroll the title during CD-text play.

[Z] button

Use the button to select one of the 3 types of sound characteristics already stored in memory.

[SCN] button

Perform scan play for 10 seconds of each track. Disc scan play is performed when the button is pressed and held.
Repeat play while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3/WMA mode.

[C] button

Buttons color change to multicolor. Press and hold the button for 1 second or longer to go into the user color adjustment.
Select a track when listening to a disc. Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez dplier cette page et vous rfrer aux schmas quand vous lisez chaque chapitre. Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten. Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo. Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken. Nota: Cuando lea los captulos, despliegue esta pgina y consulte los diagramas. Observera: Vik ut denna sida fr att kunna se figurerna ver bilstereons framsida medan du lser de olika kapitlen. Nota: Certifique-se de abrir esta pgina e consulte os diagramas frontais conforme realiza a leitura de cada captulo.
Perform scan play for 10 seconds of each track while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer to perform folder scan play while in the MP3/WMA mode.
Use the button to input a title in the CD mode. Use the button to switch the user titles or track titles, etc. while in the CD/MP3/WMA mode. Use the button to scroll the title during the CD-text play, while in the CD/MP3/WMA mode.

2 280-8330-00

Display Items
Background indication Motion image (1 pattern), wallpaper (5 patterns) (Page 25) Demo mode with screen saver (Page 25)
Operation status indication Titles, Spectrum analyzer, CT (clock time) are displayed.
Displayed when changing source

The factory default setting is 0. (Adjustment range: F12 to R12)

Adjusting the bass

1. Press the [A-M] button and select BASS 0. 2. Turn the [ROTARY] knob to adjust the bass. BASS : 6 to 7 (The factory default setting is 0) 3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached.
3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. Note: During A-M adjustment mode, if no operation is performed for more than 7 seconds, this mode can be cancelled and return to previous mode.

Radio Operations

Listening to the radio
1. Press the [SRC] button and select the radio mode. The frequency or PS and PTY appears in the display.
PS: Programme service name PTY: Programme type
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. 1. Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. 2. Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect.
The factory default setting is off.
2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: F1 (FM1) F2 (FM2) F3 (FM3) A (MW/ LW) F1 (FM1). 3. Press the [, ] lever upward or downward to tune in the desired station.

CT (Clock Time) function

The CT function receives CT data sent from an RDS station and displays the time.
If a CT data is not being received, : CT appears in the display. Note: CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT may not display accurately.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

There are 2 types of seek tuning: DX SEEK and LOCAL SEEK. DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity. 1. Press the [BND] button and select the desired band (FM or AM (MW, LW)). 2. Tune into a station.
If MANU is lit in the display, press and hold the [BND] button for 1 second or longer. MANU in the display goes off and seek tuning is now available. If TA is lit in the display, TP stations are automatically sought.

DX SEEK Press the [, ] lever upward or downward to start automatic station tuning. When the lever is pressed upward, search will be performing in the direction of higher frequencies. When the lever is pressed downward, search will be performed in the direction of lower frequencies.
When seek tuning starts, DX SEEK appears in the display.
LOCAL SEEK If the lever is pressed upward or downward and held in position for 1 second or longer, local seek tuning will be enabled. Broadcast stations with good reception sensitivity are selected.
When local seeking starts, LO SEEK appears in the display.

Manual memory

1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Manual tuning

There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
If MANU is not lit in the display, press and hold the [BND] button for 1 second or longer. MANU is lit in the display and manual tuning is now available.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)). 2. Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
2. Tune into a station. Quick tuning: Press the [, ] lever upward or downward and hold in position for 1 second or longer to begin station tuning. Step tuning: Press the [, ] lever upward or downward to perform manual tuning.
If no operation is performed for more than 7 seconds, manual tuning is cancelled and the display returns to the previous mode.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [ ] button. 2. When a desired station is tuned in, press the [ ] button again to continue receiving that station. Note: Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.

Even if you select FM1 or FM2, a TP station is stored into memory for FM3.
This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. The factory default setting is OFF.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.
This function can only be used when TP is lit in the display. When TP is lit, this means that the RDS broadcast station being received has traffic announcement programmes.
Setting the TA standby mode If you press the [TA] button when only TP is lit in the display, TP and TA light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, TRA INFO appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Cancelling the TA standby mode As TP and TA lit in the display, press the [TA] button. The TA in the display goes off and the TA standby mode is cancelled.
If TP is not lit, pressing the [TA] button searches for a TP station.
1. Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display. 2. Press the [, ] lever upward or downward to select PTY. 3. Turn the [ROTARY] knob to select ON or OFF. ON: PTY in the display lights and PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display. OFF: PTY in the display goes off and PTY standby mode is cancelled. 4. Press the [ADJ] button to return to the previous mode. Cancelling a PTY interrupt broadcast Press the [TA] button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode.
Searching for a TP station When TP is not lit, if you press the [TA] button, TA in the display lights and the unit automatically receives a TP station. Note: If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off TA in the display and stops TP station searching.

RDS Operations Switching the PTY display language
You can select one of 4 languages (English, German, Swedish or French) for the PTY displayed in the display.
The factory default setting is ENGLISH.

CD/MP3/WMA Operations

MP3/WMA

What is MP3?

MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CDR disc or CD-RW disc to allow a long listening time without having to change CDs.
1. Press the [ADJ] button to switch to the adjustment selection display. 2. Press the [, ] lever upward or downward to select LANGUAGE. 3. Turn the [ROTARY] knob to select the desired language. 4. Press the [ADJ] button to return to the previous mode.
What is WMA? Volume setting of TA, emergency broadcast (Alarm) and PTY
The volume for TA, Alarm and PTY interrupts can be set during TA, Alarm or PTY interrupt.
The factory default setting is 15.
During a TA, Alarm or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33).
When the TA, Alarm or PTY interrupt ends, the volume returns to the level it had before the interrupt.
WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft Corporation. Notes: If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output. (The WMA indicator blinks.) Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. To disable DRM (Digital Rights Management): 1. When using Windows Media Player 8, click on TOOLS OPTIONS COPY MUSIC tab, then under COPY SETTINGS, unclick the check box for PROTECT CONTENT. Then, reconstruct files. 2. When using Windows Media Player 9, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility.
Precautions when creating MP3/ WMA disc
Usable sampling rates and bit rates: 1. MP3: Sampling rate 11.025 kHz-48 kHz, Bit rate: 8 kbps-320 kbps / VBR 2. WMA: Bit rate 48 kbps-192 kbps File extensions 1. Always add a file extension.MP3 or.WMA to MP3 or WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension , the file cannot be played.
2. Files without MP3/WMA data will not play. The indication : appears in the play time display if you attempt to play files without MP3/WMA data. Logical format (File system) 1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select ISO9660 level 1, 2 or JOLIET or Romeo as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 3. Do not affix a name to a file inside a folder having the same name. Folder structure 1. A disc with a folder having more than 8 hierarchical levels will be impossible. Number of files or folders 1. Up to 255 files can be recognized per folder. Up to 500 files can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording.

2. After making these settings, remove the disc and then reinsert it. 3. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard. Note: When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WMA type, the CD cannot be played normally in some cases.

Backup Eject function

1. Press the [Q] button. The SLOPING CONSOLE opens and a CD ejects. EJECT appears in the display.
Be careful not to get your fingers caught when opening and closing the SLOPING CONSOLE. 2. Remove the CD and press the [Q] button to close the SLOPING CONSOLE. Notes: Be sure to close the SLOPING CONSOLE after removing the CD. The SLOPING CONSOLE closes automatically 30 seconds after removing the CD. If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload) 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. If you force a CD into before auto reloading, this can damage the CD.

Multisession function

When a disc contains both normal CD type tracks and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play. Default value is CD. Each time you press and hold the [BND] button for 1 second or longer, the mixed mode is switched between CD type or MP3/WMA type. The following indication appears in the title display when switching the track type to be played.
Display when CD type track is selected:
Listening to a disc already loaded in the unit
Press the [SRC] button to select the CD/MP3/ WMA mode. When the unit enters the CD/MP3/WMA mode, play starts automatically. If there is no disc loaded, the indication NO DISC appears in the title display.
The mode changes each time the [SRC] button is pressed. (Modes are not displayed for equipment that is not connected.)

M-SESS CD

Display when MP3/WMA M-SESS MP3 type track is selected: 1. Types of recording that can be played are as follows.

Setting Set to CD

Set to MP3/WMA
Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA
Radio (DAB) CD/MP3/WMA (CD changer (iPod BB)) (CD changer) (DVD changer) (TV) AUX Radio.

Loading a CD

1. Press the [Q] button. The SLOPING CONSOLE opens. 2. Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading. Notes: Never insert foreign objects into the CD SLOT. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.
Discs not bearing the or mark and CD-ROMs cannot be played by this unit. Some CDs recorded in CD-R/CD-RW mode may not be usable. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the center of the insertion slot.

Note: If the CD playing is not a CD-text CD or no user title has been input, appears in the display. If MP3/WMA disc is not input TAG, A appears in the display. For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. Tag displays give priority to V2.3 / 2.2 In the case of album Tags for WMA, the information written into the extension header is displayed. Only ASCII characters can be displayed in Tags.

Selecting a track

Track-up 1. Press the [, ] lever upward to move to the beginning of the next track. 2. Each time the [, ] lever is pressed upward, playback proceeds to another track in the advancing direction. Track-down 1. Press the [, ] lever downward to move the beginning of the current track. 2. Press the [, ] lever downward twice to move to the beginning of the previous track.
Be careful not to catch your hand or fingers while closing the SLOPING CONSOLE. 3. After loading a CD, the SLOPING CONSOLE closes automatically. Notes: Note that SLOPING CONSOLE closes immediately after a CD is inserted into CD insertion slot. If no CD is loaded in the SLOPING CONSOLE, it closes after 30 seconds.
Fast-forward/fast-backward
Fast-forward Press the [, ] lever upward and hold in position for 1 second or longer. Fast-backward Press the [, ] lever downward and hold in position for 1 second or longer.
For MP3/WMA disc, it takes some time until the start of searching and between tracks. In addition, the playing time may have a margin of error.

Pausing play

1. Press the [ ] button to pause play. PAUSE appears in the display. 2. To resume CD play, press the [ again. ] button
Folder Select Displaying CD titles
This unit can display title data for CD-text/MP3/ WMA disc and user titles input with this unit. 1. Press the [D] button to display the title. 2. Each time you press the [T] button, the title display changes in the following order: CD-TEXT disc User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc). MP3/WMA disc Folder Track Album TAG Artist TAG Title TAG Folder. This function allows you to select a folder containing MP3/WMA files and start playing from the first track in the folder. 1. Press the [DN] or [UP] button. Press the [DN] button to move the previous folder. Press the [UP] button to move the next folder.

Root folder

Folder repeat play
This function allows you to play a track currently being played in the MP3/WMA folder repeatedly. 1. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. F.RPT appears in the display.

Random play

This function allows you to play all tracks recorded on a disc in a random order. 1. Press the [RDM] button to perform random play. RDM appears in the display.

Folder random play

Press the [UP] button while in the final folder to shift to the first folder. Folder without an MP3/WMA file is not selectable.

Setting the speed of the spectrum analyzer
This function allows you to adjust the speed of the spectrum analyzer.
The factory default setting is HIGH
2-1. Select S-A SPEED. 3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: HIGH MID LOW
Setting the power message display
When the unit is powered on or off, a message is displayed. The user can turn this message display ON or OFF.
Setting the background vision
The background vision includes 5 wallpaper images and 1 motion pictures. Choose SCAN to automatically display all the wallpaper.
The factory default setting is SCAN.
2-1. Select POWER MSG 3-1. Turn the [ROTARY] knob to select ON or OFF.
2-1. Select BGV. 3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: SCAN MOVIE WALL 1 WALL 2 WALL 3 WALL 4 WALL 5 OFF
Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
The factory default setting is DEMO.
Setting the spectrum analyzer pattern
The factory default setting is PTN 1
2-1. Select S-A PTN. 3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: PTN 1 PTN 2
Setting the sensitivity of the spectrum analyzer
This function allows you to adjust the sensitivity of the spectrum analyzer.
The factory default setting is MID
2-1. Select SCRN SVR. 3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: OFF MSG INFO DEMO
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored in memory and displayed for any mode.
The factory default setting is Welcome to Clarion.

2-1. Select

S-A SENS.

MSG INPUT ] button.

Setting the dimmer control
You can set the dimmer control ON or OFF.

3-1. Press the [

3-2. Press the [, ] lever upward or downward to move the cursor. 3-3. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders: Capital letters Small letters Numbers/ Symbols Umlaut Capital letters 3-4. Turn the [ROTARY] knob to select the desired character. 3-5. Repeat step 3-2 to 3-4 to enter up to 30 characters for message. 3-6. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message mode.

Press and hold the [BND] button for 1 second or longer to cancel the input message. Then press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.
2-1. Select DIMMER. 3-1. Turn the [ROTARY] knob to select ON or OFF.

To change other settings

1. Press the [ADJ] button to switch to the adjustment selection display. 2. Press the [, ] lever upward or downward to select the item name. Each time the [, ] lever is pressed up/down, the item display changes in the following order: BLINK LED AMP CANCEL LINK ACT LANGUAGE AUX/TEL AUX SENS TELSP TEL-SW CALIBRATE A-VOL SYSTEM 3. Turn the [ROTARY] knob to select the desired setting item.
After completing settings, press the [ADJ] button to return to the previous mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
2-1. Select AUTO SCRL. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON: To scroll automatically. OFF: To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer. Note: User title cant scroll.

Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.
2-1. Select BLINK LED. 3-1. Turn the [ROTARY] knob to select ON or OFF.
Setting the external amplifier

Setting the auto-dimmer

This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your vehicle.
The factory default setting is AUTO.
2-1. Select DIMMER IN. 3-1. Turn the [ROTARY] knob to select AUTO or ILLUMI. AUTO: Interlocked to the brightness inside your vehicle. ILLUMI: Interlocked to the illumination inside your vehicle.
2-1. Select AMP CANCEL. 3-1. Turn the [ROTARY] knob to select ON or OFF. ON: Use with connected AMP. OFF: Use with inside AMP.

Selecting AUX/TEL

You can listen to sounds and music from external devices or your telephone calls from the speakers when connected to this unit. When TEL INT or External device is connected to this unit, you can select TEL mode or AUX mode.
The factory default setting is AUX.
2-1. Select AUX/TEL. 3-1. Turn the [ROTARY] knob to select AUX or TEL. AUX : AUX/TEL input cable is for external Audio input. TEL : AUX/TEL input cable is for cellular phone audio input.
ON: You can listen to your telephone calls from the speakers connected to this unit.
When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob.
MUTE: The sound from this unit is muted during telephone calls.
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

Procedure to scroll a title
Set AUTO SCROLL to ON or OFF. (The factory default setting is ON. Refer to the subsection Setting the method for title scroll in section Operations Common to Each Mode.) When set to ON The title is automatically kept scrolling. When set to OFF To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer. Note: User title cant scroll.

CD changer functions

When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [SRC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [SRC] button to select the CD changer for play.
If NO MAG appears in the display, insert the magazine into the CD changer. DISC CHECK appears in the display while the player loads (checks) the magazine. If NO DISC appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. Note: Some CDs recorded in CD-R/CD-RW mode may not be usable.

Selecting a CD

The [DN] or [UP] button correspond to a disc load in the magazine. Press the [DN] or [UP] button to select the desired disc.
If a CD is not loaded in a slot of magazine, NO DISC appears in the display.

Disc scan play

Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer. This function continues automatically until it is cancelled.
Disc scan play is useful when you want to select a desired CD.
CD-ROM discs cannot be played from every CD changer, its depended on the model.

Displaying CD titles

This unit can display title data for CD-text CDs and user titles input with this unit. 1. Press the [D] button to display the title. 2. Each time you press the [T] button, the title display changes in the following order: User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc)
1. Press and hold the [SCN] button for 1 second or longer. D.SCAN appears in the display and disc scan play starts.

TV Operations

CD player section

System: Compact disc digital audio system Frequency Response: 5 Hz to 20 kHz ( 1 dB) Signal to Noise Ratio: 100 dB (1 kHz) Dynamic Range: 95 dB (1 kHz) Distortion: 0.01%
Note: Specifications and design are subject to change without notice for further improvement.

Clarion Co., Ltd.

2005/12
All Rights Reserved. Copyright 2005: Clarion Co., Ltd. Printed in China / Imprim en Chine / Gedruckt in China / Stampato in Cina Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China

PE-2789E 280-8330-00

 

Tags

CDX-397 PT-L759U Nakamichi ZX9 PSR-7000 2 2 Kidizoom AX-X1 Kxtg1100G Zapbox Easy Review EOB302 28PT4523 CW-29Z68P PS-5105 KDL-40HX705 VPL-CX3 FDA-FM1AM V8705DS PDX-600 FX-870 Roadwin C3000B 32PF9966 HP 1050 LE32R51BD Supertorque A34XP 3 0 Navman M300 SA-AX530 Ngage 9000 N1000C Automatic Crossfire Flatbed LN-118 Psl33 Premier 3 DR-670 Strip KRF-X9060D DVS7905B Motorokr E6 83200 MX200 Compustar System HDJ-2000 RH4810V SGH-G400 Mamiya 6MF Casio 2632 Manager Headset MZ36-U-024-UK UE-37C6000RW P330M WD-80160NUP 9-5 2003 VPH7090- FLM-0711M PSR-275-PSR-273 B2712HDS-1 BBT500H VRX745VD 9 0 HS-4W 1202FX Chartplotter Dragonfly E-link Premiere 5 57162 Pursuit 2 Daikin RKS NWZ-B153F Yamaha MD8 Lexmark Z645 LE26B450 PDS4221 KX444 Dect180 KDL-32S4000E MCD289 12 V534-2 DMP460 SPP-D900 Ex-invisible WAR DV-S733A SW-508ES LDA-530 HR1810 Becker DTM Ethernet MW123ST-XSA UE-46C6500 MF-FM37s2K 2F2607 28PT4475 58 AY62 Ay82

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101