English

1. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate. 2. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about 1 hour. The condensation will disappear naturally allowing normal operation. 3. Driving on extremely bumpy roads may cause severe vibration and cause the sound to skip.
INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.

WARNING

For your safety, do not watch or operate the touch panel while driving.

+DXZ858RMP_01-02-Eng.p65

1/21/05, 5:44 PM 280-8188-00

Sloping Console

This unit uses a SLOPING CONSOLE to make large screen displays possible. When you use the SLOPING CONSOLE, be sure to close it. 2. Before the SLOPING CONSOLE closes, there may be a braking sound from the safety mechanism. This is normal. 3. If you move the SLOPING CONSOLE by hand, this may start play. To correct this play, with the power for the unit ON, press the [Q] Q button to close the SLOPING CONSOLE. 4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or closed state. If there is any obstruction when the SLOPING CONSOLE tries to close, the safety mechanism is triggered and the SLOPING CONSOLE returns to the open state. If this happens, remove the obstruction, then press the [Q] button. Q 5. To avoid scratching the compact disc, keep the 12 or 8 cm CD level when loading or removing it.

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE. 1. For safetys sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key. If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close.

+DXZ858RMP_01-13-Eng.p65

1/21/05, 2:31 PM 280-8188-00

Switching the background

1. Touch [DISP].
3. Touch on the left of the display to select [DAY] or [NIGHT].

COLOR SELECT

DARK BLUE
DISPLAY EDIT screen displays. 2. Touch on the left of the display to choose the background.

DISPLAY EDIT

SP/ANA RTN

<<

The background includes 12 wallpaper images and 2 motion pictures. Choose [SCAN] to automatically display all the wallpaper. Background M01: WRC M02: Landscape P01: Car and Checker Flag P02: 307WRC from Two View Points P03: Rally Driver P04: Driving Scene P05: Cube P06: Bubble P07: Speaker P08: Digital Image1 (Disc media) P09: Digital Image2 (Broadcast media such as satellite) P10: Mixer P11: Record Player P12: Meter 3. Touch [RTN].
4. Touch on the right of the display to select the color to set. COLOR DARK BLUE IVORY WINE RED LIGHT BLUE GREEN
Adjusting the spectrum analyzer

t Stop Be

Display edit mode appears. 2. Touch [SP/ANA].

D-BLUE

SP/ANA
The display shows the spectrum analyzer mode. 3. Touch on the right of the display to select the spectrum analyzer to set.
To change wallpaper color
You can change the colors of the wallpaper (from P05 to P12). It can be set to both DAY mode and NIGHT mode. 1. Touch [DISP]. 2. Touch [COLOR].

D-BLUE MID

SPE/ANA
You can choose from four types. When [SCAN] is selected, each of them is displayed for about 10 seconds. 4. Touch [SENS] to select the sensitivity.

D-BLUE AUTO

D-BLUE LOW

SCROLL

The [COLOR] is displayed only when you choose wallpaper from P05 to P12.
You can choose from [HIGH], [MID], or [LOW]. 5. Touch [RTN].

05.1.24, 3:01 PM

Switching the title display
You can display stored information such as disc titles or track titles when playing back music in CD or CD changer mode. 1. Touch [DISP] while a title is shown.

CT (Clock Time) function

The CT allows you to receive CT data sent from an RDS station and display the time. To display the CT screen, touch the centre of the display. If CT data is not being received, --:-- CT appears in the display. Note: CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT data may not display accurately.

02:53 TOP

2:45 CT
Display edit mode appears. 2. Touch [TITLE].
Title edit mode appears. 3. Touch on the right of the display to choose the kind of title to show.
The title you have chosen is displayed. If it is too long to fit into the display, it automatically scrolls. 4. Touch [SCROLL]. Select [AUTO] to scroll the title repeatedly. Select [ONCE] to scroll the title only once. Notes: You cannot set the scroll options in User title. 5. Touch [RTN]. CD mode (MP3/WMA) Folder title (when using a folder) Play list (when using a play list) Track title Album TAG Artist TAG Title TAG Folder title (when using a folder). Notes: MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. Tag displays give priority to V2.3 / 2.2. In the case of album Tags for WMA, the information written into the extension header is displayed. Only ASCII characters can be displayed in Tags.

To set the PTY standby mode
1. Press the [MODE] button. 2. Touch [PTY]. PTY lights in the display and the PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.
To cancel the PTY standby mode
1. Press the [MODE] button. 2. Touch [PTY]. PTY goes off in the display and the PTY standby mode is cancelled.
To cancel a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt broadcast. The PTY interrupt broadcast is cancelled and this unit returns to the PTY standby mode.
ENGLISH News Affairs Info Sport Educate Drama Culture Science Varied Pop M Rock M Easy M Light M Classics Other M Weather Finance Children Social Religion Phone In Travel Leisure Jazz Country Nation M Oldies Folk M Document
DEUTSCH Nachrich Aktuell Service Sport Bildung Hr + Lit Kultur Wissen Unterh Pop Rock U-Musik L-Musik E-Musik - - Musik Wetter Wirtsch Kinder Soziales Religion Anruf Reise Freizeit Jazz Country Landes M Oldies Folklore Feature
PTY item SVENSKA Nyheter Aktuellt Info Sport Utbildn Teater Kultur Vetenskp Underh Pop Rock Lttlyss L klass Klassisk vrig m Vder Ekonomi Fr barn Socialt Andligt Telefon Resor Fritid Jazz Country Nation m Oldies Folkm Dokument
FRANAIS Infos Magazine Services Sport Educatif Fiction Culture Sciences Divers M Pop M Rock Chansons M Cl Lg Classiq Autre M Mto Economie Enfants Socit Religion Forum Voyages Loisirs Jazz Country Ch pays Rtro Folklore Document
Contents News Todays events Information Sports Education Drama Culture Science Variety Pop music Rock music Easy music Light music Classics Other music Weather Finance For children Social Religion Phone in Travel Leisure Jazz Country Nation music Oldies Folk music Documentaries

PTY preset memory

1. Press the [MODE] button. 2. Touch [PTY SELECT]. 3. Touch [PTY-]/[PTY+] to select desired PTY. The 29 PTY types in the table below can be selected. 4. Touch [PRESET]. The PTY memory title list is displayed. 5. Touch and hold the preset No. to be stored for 2 seconds or longer. You will hear a long beep, and the selected PTY is stored to that preset channel memory.

Emergency broadcast

If an emergency broadcast is received, all function mode operations are stopped, ALARM appears in the display, and the emergency broadcast can be heard.
To cancel an emergency broadcast
If you press the [TA] button, emergency broadcast reception is cancelled.

Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks CD-DA Play CD Play CD MP3/WMA disc Play MP3/WMA Play MP3/WMA The multi-session selection setting is reflected the next time you load a CD. Note: When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WMA type, the CD cannot be played normally in some cases.

Loading a CD

1. Press the [Q] button. The control panel opens. 2. Insert the disc into the CD SLOT. When the disc is loaded, the control panel automatically closes after several seconds, and play starts. Notes: Never insert foreign objects into the CD SLOT. If the CD does not insert easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the or mark and CD-ROMs cannot be played by this unit. Some CDs recorded in the CD-R/CD-RW mode may not be usable.
Loading 8 cm compact discs
No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the center of the CD SLOT.

Backup eject function

You can eject a disc by pressing the [Q] button even if the engine key or ACC is at the OFF position.

Selecting a track

When a CD-R/CD-RW recorded with an MP3 file or a WMA file is loaded, you can select only tracks recorded to the same folder by touching on the track display. 1. To listen to the next track, touch track display. on the
When the disc is ejected, press the [Q] button to close the control panel. If the control panel is left open, you will hear a double beep, and the control panel automatically closes. 1. Press the [Q] button. The control panel opens. 2. Press the [Q] button. The disc is ejected. Note: Always close the SLOPING CONSOLE after opening it or ejecting the CD.
Be careful not to catch your hand or fingers while closing the SLOPING CONSOLE. Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot. Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

2. To listen to the previous track, touch twice on the track display. Touching plays the next track. If you touch more times, the track advances ahead to the track for the number of times and that track is played. you touched Touching plays the previous track. If you touch more times, the track moves back to the track for the number of times you touched and that track is played. If you touch twice on the track display while the start of the track is being played, the track 2 tracks back is sometimes played.

To select a folder

To select a different folder, touch folder display on the right. on the

Play list mode

This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc. 1. Press the [MODE] button. 2. Touch []/[] to go to the next page. 3. Touch [PLAY LIST].

MODE MULTI SESS

MP3 WMA
Listening to a disc already loaded in the unit
1. Press the [SRC] button to select the CD/ MP3 mode. Play automatically starts when the mode changes to the CD/MP3 mode.

PLAY LIST

Pausing play

1. Touch [ ].

The operation of selecting the play list or tracks in the play list is the same as that of selecting a folder or tracks in a folder. Play list play is possible only when there is a file whose extension is.M3U on the CD-R/RW. Up to 5 play lists can be recognized, and up to 255 files can be recognized per play list.

To resume play

1. Touch [ ] again.
Stopping play of play list
1. Press the [MODE] button. 2. Touch []/[] to go to the next page. 3. Touch [PLAY LIST].
Notes: The SCN/RPT/RDM functions cannot be used while in the play list mode. The title changes from folder name to play list name.

Scan play

This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. 1. Press the [MODE] button. 2. Touch [TRACK SCAN]. Scan play starts from the next track after the track currently being played.

To cancel scan play

1. Press the [MODE] button.

Making a play list

Folder random play
This function allows you to play all folders on the disc at random. 1. Press the [MODE] button. 2. Touch [FOLDER RDM].
To cancel folder random play

Sound Adjustment

Adjustment items
You can adjust a sound effect or tone quality to your preference. Anti Distortion Filter (ADF).. Page 29 MAGNA BASS EXTEND.. Page 29 Sub-woofer speaker volume (SW VOLUME).. Page 30 Bass setting (BASS).. Page 30 Treble setting (TREBLE).. Page 30 Balance (BALANCE).. Page 30 Fader (FADER).. Page 30 Filter (FILTER).. Page 31
3. Touch on the right of the display to select the ADF mode.

ADF MODE

Select one of USER, 1, 2, 3, or OFF. 4. To change the details of the ADF setting, press the [ADJ] button. 5. Touch on the left of the display to select the desired item. switches the Each touch of adjustment item display as follows: Adjustment item (when USER is selected in step 3) BASS TREBLE COMP BASS. Adjustment item (when 1 to 3 is selected in step 3) LEVEL COMP LEVEL. 6. Touch on the right of the display to adjust the item. BASS and TREBLE can be adjusted within the range 1 to 13. LEVEL can be adjusted within the range 3 to +3. Select either ON or OFF for COMP. 7. Press the [SOUND] button to return to the original mode.

Setting the ADF

ADF is the abbreviation of Anti Distortion Filter. The adopted Liveliness Enhancement Filter and Sound Tone Compensation functions allow well-modulated realistic playback without affecting the characteristics of the original sound tone. This unit is provided with 4 types of sound tone effects stored in memory. Select the one you prefer. ADF-1 : Suitable for genuine speakers ADF-2 : Suitable for separate speakers ADF-3 : Suitable for co-axial speakers USER : This setting can be adjusted by the user to his or her individual preference. OFF : No sound effect The factory default setting is OFF. Notes: As the volume changes when ADF is switched, switch ADF with the volume and SW VOLUME (sub-woofer) turned down as far as possible. 1. Press the [SOUND] button. 2. Touch [ADF].

SOUND ADF

Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound. The factory default setting is "OFF". 1. Press the [SOUND] button. 2. Touch [M-BASS EX] to select "ON" or "OFF". Each time you touch [M-BASS EX], the adjustment item changes as following order: OFF ON OFF. 3. Press the [SOUND] button to return to the original mode.

M-BASS EX

TREBLE

BALANCE

+DXZ858RMP_01-29-Eng.p65
1/21/05, 5:47 PM 280-8188-00
Note: When "1", "2", "3", or "USER" is selected for ADF (Anti Distortion Filter), setting of MAGNA BASS EX cannot be performed.
Adjusting the treble (Gain, Frequency)
This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". 1. Press the [SOUND] button. 2. Touch [TREBLE]. 3. Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY GAIN. on the right of the display to 4. Touch adjust the setting. The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +6) The factory default setting for "FREQUENCY" is "12k". (Adjustment 8kHz/12kHz) 5. When the adjustment is complete, press the [SOUND] button to return to the original mode.

Adjusting the sub-woofer

"SW VOLUME" (sub-woofer) can be adjusted only when the "SUB-WOOFER" is set to "ON" (cf. page 37). The factory default setting for SW VOLUME is 0. 1. Press the [SOUND] button. 2. Touch [SW VOLUME].

SW VOLUME

3. Touch on the right of the display and adjust the item as desired. This item can be adjusted within the range -5 to +5. 4. Press the [SOUND] button to return to the original mode.

Adjusting balance/fader

BALANCE: Adjusts the volume balance between the left and right speakers. FADER: Adjusts the volume balance between the front and rear speakers. The factory default setting for BALANCE is 0 and for FADER is 0. 1. Press the [SOUND] button. 2. Touch [BALANCE] or [FADER].
Adjusting the bass (Gain, Frequency, Q-curve)
This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". 1. Press the [SOUND] button. 2. Touch [BASS]. 3. Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY Q GAIN. 4. Touch on the right of the display to adjust the setting. The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +8) The factory default setting for "FREQUENCY" is "50". (Adjustment 50/ 80/120Hz) The factory default setting for "Q" is "1". (Adjustment 1/1.25/1.5/2) 5. When the adjustment is complete, press the [SOUND] button to return to the original mode.
3. Touch on the right of the display and adjust the item as desired. BALANCE can be adjusted within the range L13 (left side emphasized) and R13 (right side emphasized). FADER can be adjusted within the range R12 (rear side emphasized) and F12 (front side emphasized). 4. Press the [SOUND] button to return to the original mode.

4. Press the [ADJ] button to return to the original mode.
Setting internal amplifier use ON/OFF (AMP CANCEL)
Set internal amplifier use ON/OFF matched to whether or not an external amplifier is used. Set AMP CANCEL to ON (internal amplifier use OFF) when an external amplifier is connected and the internal amplifier is not used. The factory default setting is OFF (internal amplifier used). 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SOUND]. 3. Touch on the left of the display to select AMP CANCEL.
Setting the source icon (SRC ICON)
You can change the source icon on the display. The factory default setting is ICON. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select SRC ICON.

AMP CANCEL

4. Touch on the right of the display to select ICON or SPE/ANA. 5. Press the [ADJ] button to return to the original mode.

AUX function

This system has an external RCA input so you can listen to sounds and music from external devices connected to this unit.
3. Touch on the left of the display to select "AUX SENS".

AUX SENS

Selecting AUX / TEL
You can listen to sound and music from external devices, or your telephone calls from the speakers when connected to this unit. When TEL INT or External device is connected to this unit, you can select the TEL mode or AUX mode. The factory default setting is AUX. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING]. 3. Touch on the left of the display to select AUX/TEL.
4. Touch on the right of the display to set the input level. Select LOW, MID or HIGH. Notes: When the input level is overloaded, OVERLOAD appears. Adjust AUX SENS or the input level so that OVERLOAD disappears. 5. Press the [ADJ] button to return to the original mode.
Setting the car speaker output for the cellular phone (Optional TEL-002)
To output telephone calls, set the cellular phone. The factory default setting is RIGHT. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING]. 3. Touch on the left of the display to select TEL-SP.

AUX/TEL

4. Touch on the right of the display to select AUX or TEL. AUX: The AUX/TEL input cable is for external Audio input. TEL: The AUX/TEL input cable is for cellular phone audio input. 5. Press the [ADJ] button to return to the original mode.

TEL-SP

Setting the input level (AUX SENS) of portable audio (AUX mode)
This function allows you to set the input level of optional external devices connected to this unit. The factory default setting is MID. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING].

SLIDE CONT

4. Touch on the right of the display to select UP + or DOWN +. 5. Press the [ADJ] button to return to the original mode.
7. OPERATIONS OF ACCESSORIES

CD Changer Operations

CD changer
When an optional CD changer is connected through the CeNET cable, this unit can control CD changer operations. This unit can be connected to a total of 2 CeNET-wired CD changers. Playing time display 00:01: The playing time is displayed. Track No. display Touching or allows you to select the track to play, or fast-forward/fast-rewind tracks.
Title display The selected title is displayed. Disc No. display Touching selects discs.
s Touching this pauses or resumes play. DISP The display contents can be changed. a/d (only in the simple operation display) Touching these selects the track to play. Touching and holding these fast-forwards/fastrewinds tracks. / (Only in the simple operation display) Touching these buttons selects the disc to play.
When 2 CD changers are connected
Press the [SRC] button to select the changer connected to this unit. (Each press of the [SRC] button switches the changer.) If the CD changer does not contain a magazine, NO MAGAZINE is displayed, and if the magazine does not contain a CD, NO DISC is displayed. For details on the title display, see Switching the title display (cf. page 15).
Screen displays in the changer mode
Standard operation display The standard operation display appears by pressing the [SRC] button to select changer modes.
Track No. display Title display Disc No. display
CD-ROM discs cannot be played from every CD changer. This depends on the model.

TELL ME

03:09 2:45 CT DISP
Note: Some CDs recorded in the CD-R/CD-RW mode may not be usable.

Playing time display

Selecting the changer mode
1. Press the [SRC] button to select the changer mode. Each time you press the [SRC] button, the display switches as follows: Radio (DAB) CD/MP3 (CD changer) (DVD changer) (TV) AUX Radio. The mode of equipment that is not connected is not displayed. Play starts automatically when the mode changes to the changer mode.

Simple operation display Pressing and holding [MODE] button for 2 seconds or longer switches the simple operation display.

TRACK DISC

+DXZ858RMP_01-41-Eng.p65

05.1.24, 3:03 PM

1. Touch [s].
2. Touch [TRACK-SCAN]. Scan play starts from the next track after the track currently being played.

1. Touch [s] again.

Selecting a CD
1. Touch on the disc No. display to select a disc. Play starts. If magazine does not contain the disc you selected, the No. for that disc is not displayed.

Disc scan play

Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected changer. This function continues automatically until it is canceled. Disc scan play is useful when you want to select a desired disc. 1. Press the [MODE] button. 2. Touch [DISC SCAN]. Disc scan play starts from the next disc after the disc currently being played.
1. To listen to the next track, touch track display. on the 2. To listen to the previous track, touch twice on the track display. Touching plays the next track. If you more times, the track advances touch ahead to the track for the number of times you touched and that track is played. plays the previous track. If you Touching touch more times, the track moves back to the track for the number of times you touched and that track is played. If you touch twice on the track display while the start of the track is being played, the track 2 tracks back is sometimes played.

To cancel disc scan play

Repeat play continuously plays the current track. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [TRACK RPT].

Disc repeat play

After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [DISC RPT].
Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is canceled. The scan play function is useful when you want to select a desired track. 1. Press the [MODE] button.
To cancel disc repeat play
Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [TRACK RDM].

Disc random play

The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [DISC RDM].

1. Touch on the channel display again.
There are 2 ways available: quick tuning and step tuning. In the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Touch and hold [BAND] for 1 second or longer if SEEK is displayed. Manual tuning is possible when MANU is displayed. 2. Operate the channel display to tune to a channel on which there is a broadcast. Step tuning Touch on the channel display. Quick tuning Touch on the channel display. Tuning stops when you take your finger away from the panel.
Auto store selects 6 TV stations automatically and stores each one into preset memory. 1. Touch and hold [PS/AS] for 2 seconds or longer. A-STORE appears on the display. Stations with good reception are automatically searched, and are stored to preset memory (No.1 to No.6) in order from the station having the lowest frequency. Notes: When auto store is performed, stations stored to memory so far are cleared. When there are fewer than 6 stations with good reception, low frequencies are automatically returned to, and auto store is performed again. If there are fewer than 6 stations even after auto store is performed twice, stations stored so far remain in memory.
This function allows the user to select a preset station. 1. Touch [PRESET]. The preset memory No. list is displayed. 2. Touch the preset memory No. The station can also be tuned by touching in the standard operation display.
Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked. 1. Touch [PS/AS]. P-SCAN appears on the display. The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received.
To cancel the preset scan
1. Touch [PS/AS]. P-SCAN disappears, and the stations that were being received when [PS/AS] was touched are received next.
3. Touch on the left of the display to select [TV DIVER].

TV D I V E R

Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [MODE] button. 2. Touch [TV/VTR]. Every time you touch this, the function switches between TV and VTR.
4. Touch on the right of the display to select [ON] or [OFF]. 5. Press the [ADJ] button to return to the original mode.
Setting the TV area (TV AREA)
When you select the TV area (TV reception area), the TV tuner area setting changes. The factory default setting is GERMANY. 1. Press the [ADJ] button to set the adjust mode. 2. Touch [TUNER]. 3. Touch on the left of the display to select TV AREA.

Recalling a preset programme
1. Press the [SRC] button to select the DAB mode. 2. Touch [BAND]. Each touch of [BAND] changes the display in the following order: M1 M2 M3 M1. 3. Touch on the right of the display to recall a preset programme.
Notes: If a TP station is not received, the main unit stops the search operation. TP may be lit in the display when a TP broadcast is transmitted from an RDS station. In this case, press the [TA] button to perform TP seek tuning. Press the [TA] button again to return to the previous mode.

INFO (Announcement)

In the INFO standby mode, when the selected announcement programme starts, the main unit automatically switches to the selected announcement programme. To set the INFO standby mode If you press and hold the [TA] button for 1 second or longer, INFO lights in the display and the main unit is set to the INFO standby mode until the selected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold the [TA] button for 1 second or longer while the selected announcement broadcast is being received, reception of the selected announcement broadcast is cancelled and the main unit enters the INFO standby mode. To cancel the INFO standby mode To cancel the INFO standby mode, press and hold the [TA] button for 1 second or longer. Information select This is a function for selecting INFORMATION ON or OFF in the Information interrupt mode. You can set ON for up to 6 information items. You can select any of the 6 items below: ENGLISH Travel Warning News Weather Event Special INFORMATION item Contents Transport flash Warning / Service News flash Area weather flash Event announcement Special event
The AF function switches to a different frequency on the same network in order to maintain optimum reception. The factory default setting is ON. If the reception of the current broadcast station deteriorates, SEARCH appears in the display and the radio searches for the same programme on another frequency. For details on the AF function(cf. page 19) , refer to the section RDS operation of the respective owner's manual. To switch the AF function ON To switch the AF function OFF AF function between RDS and DAB When the same programme is broadcast by both RDS and DAB, and this function is ON, the main unit automatically switches to receive the broadcast with the better reception.

Note: Specifications and design are subject to change without notice for further improvement.
05.1.24, 3:03 PM 280-8188-00