OHMD74 Final Manual.qxd

6/17/2004

5:32 PM

Page 1

Page 2

Welcome!
Thank you for purchasing the Clarion OHMD74 overhead monitor system. This monitor is engineered with advanced technological designs and components for the best picture quality and convenience.

Warning!

The Clarion OHMD74 overhead monitor system is designed strictly for rear-seat entertainment. Viewing the monitor while operating a motor vehicle can result in serious injury and/or property damage. Clarion is not responsible for any injury and/or property damage as a result of the improper use or viewing of the monitor.

Features:

7 Wide-Screen Flip Down Monitor with TFT Active Matrix Display with 16:9/4:3 format Built-in CD/DVD/MP3 Player Selectable screen modes: Normal, Zoom, Full, and Wide Screen 1 - Audio/Video input Audio/Video Game Port Video output for additional monitors Front panel menu, picture, source, and DVD controls OSD (On-Screen Display) Built-in IR transmitter for WH104 wireless headphones (2 headphones included) FM modulator control (FM200 not included) Built-in dome lights IR remote control Supports both NTSC and PAL video formats

Page 3

Introduction
The Clarion OHMD74 is a full-featured overhead entertainment center featuring DVD, CD, and MP3 playback. This system combines flexibility, reliability, and expandability all in one. Designed primarily for rear seat entertainment, the audio from the OHMD74 can be enjoyed privately through wireless headphones and/or incorporated into any head unit. And with the ability to access all the features and functions through an IR remote control, the rear passengers wont have to leave the comfort and safety of their seats. Since Clarion has always been an innovator in the mobile entertainment industry, a lot of responsibilities follow suit. One of the major emphasizes incorporated into the OHMD74 is reliability. This was achieved by using high-grade electronic components and heightened electronic connections. As the mobile environment is extremely harsh, these technological advances insure years of unrelenting operation. Given that the OHMD74 is the centerpiece of the entertainment center, it features a built-in A/V switcher allowing for multiple A/V sources to be added. Included with the OHMD74, is a Game Port Station, which also can be used for a temporary device, such as a camcorder or game station, to be enjoyed in the vehicle. With everything that Clarion has to offer with the OHMD74, it truly lives up to Clarions motto, BE SEEN, BE HEARD!

Page 4

FCC Approval
The Clarion OHMD74 have been tested and found to comply within the limits of a Class B digital device, pursuant of Part 15 of the FCC rules. These limitations are designed to provide reasonable protection against harmful interference in a vehicle installation. This equipment generates and uses radio frequency energy and if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to a radio or television reception, turn off the equipment and contact a local Clarion dealer for assistance. Changes or modifications to this product not approved by the manufacturer will void the warranty and violate FCC Approval.

Page 5

Table Of Contents Introduction and Precautions. 2-6 Care and Maintenance. 6-8 Operating OHMD74 Monitor. 9-16 About Disc Formats. 17-18 Operating the Remote Control. 19-21 Changing Display Settings. 22-28 Replacing the Remote Battery. 29 Operating the Headphones. 30 Installation Instructions. 31-37 Package Contents. 38 Troubleshooting. 39-40 Specifications. 40 Warranty Information. 41-42

Page 6

Precautions
This overhead monitor system is designed for use in 12V DC negative ground vehicles. Do not operate the overhead monitor system in ways other than described in this manual. Doing so may result in damage to the monitor system and/or the vehicle, voiding the warranty of this product. SAFETY FIRST! This overhead monitor system is designed for rear-seat entertainment only. Do not install in/on dashboard or anywhere else that would allow the operator of the vehicle to view the monitor. Do not disable or modify the overhead monitor system. Doing so may damage the monitor system, and void the warranty. Keep all liquids away from the overhead monitor system. Do not leave the overhead monitor system open when not in use. Direct sunlight can cause the monitor not to function properly. In extreme cold temperatures, the movement of the picture may appear to move slow and dark. The overhead monitor system will function properly once the temperature rises. Do not hang or hang items from overhead monitor system. If you have any questions or problems concerning the monitor that are not cover in this manual, please consult a local Clarion dealer for assistance. Before installing this overhead monitor system, please check your local traffic laws and regulations.

Care And Maintenance

Keep all liquids away from the OHMD74 overhead monitor system. Liquids inside the monitor will damage the electronics, and can result in electrical shock or fire. In the event that the unit should become wet, turn off the power and contact a local Clarion dealer for assistance.

5:33 PM

Page 7
To clean the monitor, use a clean soft cloth and gently wipe the screen. If possible, use specially designed monitor wipes to clean the screen.

Handling Discs

Always handle a disc by its edges. Never touch the surface of the disc directly. To remove inadvertent fingerprints and dust, use a soft cloth and wipe in a straight line from the center of the disc to the outside edge. Never use liquid or aerosol cleaners, anti-static spray, or thinner to clean the disc surface. Do not place discs in the following places: direct sunlight; dirty, dusty and damp areas; near car heaters; on the seats or dashboard. Avoid using adhesive labels on discs.

Servicing the OHMD74 Overhead Monitor System
In the event a problem arises with the OHMD74 overhead monitor system, do not attempt to disassemble or repair the monitor yourself. Opening or attempting to service the monitor will void the warranty; instead, contact a local Clarion dealer for assistance. The internal parts are not serviceable by the user. The OHMD74 is a Class 1 Laser product, using a laser which could cause hazardous radiation exposure if improperly disassembled. All warranty service should be performed by an authorized Clarion service center. CAUTION! Changes or modifications to this product not approved by the manufacturer will void the warranty and will violate FCC approval.

Page 8

Temperature and Moisture
If the player is used while the interior of the vehicle is very cold, condensation may form on the disc or on the internal optical pickup system and prevent proper playing of the disc. If you suspect that condensation is an issue, eject the disc and inspect the playing surface. If necessary, remove the condensation with a clean soft cloth as described above. If you still experience problems with playback, you will need to wait for approximately one hour to allow the OHMD74 to warm up, and for the condensation to evaporate. If playback issues continue, please see your authorized Clarion dealer.
Discs Compatible with OHMD74
The OHMD74 supports and plays DVD (Region 1), VCD, CD, CD-R, and MP3 formats. Although the OHMD74 is designed to play DVDs, DVDs are manufactured to respond to the particular Region Management Information they are created in. The OHMD74 is compatible with Region 1 and ALL Region DVDs. The DVD/CD mechanism can accept both 5 (12cm) and 3 (8 cm) single sided discs. It is recommend when burning your discs; to use CD-Rs versus CD-RWs. The encryption process on the CD-RW is not as deep, which can cause skipping and/or error messages on the OHMD74.

Page 9

Disc Playback
DVD playback will often begin automatically when the disc is inserted. With some DVD discs, you will need to press [ENTER] or [ ] to begin playback. CD-Audio discs will begin playback automatically. CDs with MP3 files may require you to navigate the file structure menu. For more information, see MP3 Playback on CD-R Discs.

Stopping Playback

There are two ways to stop playback: Pressing [ ] once will stop playback, and the OHMD74 will store the location last played on the disc. Playback can be resumed at the same point on the disc by pressing [ ]. Pressing [ ] twice will stop playback and clear the OHMD74 memory of the last point played on the disc. Pressing [ ] at this point will cause the OHMD74 to begin playback from the beginning of the disc.
Selecting a Track or Chapter
Selecting tracks or chapters can be accomplished by either using the IR remote or front mounted controls. These controls allow the operator to skip over undesired tracks or repeat a particular track. Advancing Tracks / Chapter: Press the insert up arrow until desired track / chapter is found. Repeating Previous Tracks / Chapter: Press the insert down arrow until desired track / chapter is found. Note: For some VCD 2.0 discs, the insert up arrow and insert down arrow functions may not be available.

Page 10

Discs Incompatible with OHMD74
The following disc types are incompatible with the OHMD74: DVD-ROM/ DVD-R/DVD-RW/DVD-RAM Photo CD/CD-RW CD-ROM(excluding most CD-Recordable discs using MP3 or CD-A Formats) Any DVD with a region number other than 1 and ALL CD audio manufactured with certain copyright methods Note: 8cm discs are NOT compatible. Please do NOT insert 8cm discs.

DVD Regions

This digital media player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the region number of this player (Region 1), this player will not be able to play the disc. Some DVDs are manufactured to operate in ALL zones, and those discs are compatible with the OHMD74.

Page 11

Searching During Playback
Press [ ] and [ ] during playback to rapidly search for a particular section of a DVD or CD. Each time a fast-search button is pressed, the speed of the fast search changes as follows: Standard Speed - 2X - 4X - 6X - 8X

Pausing Playback

Press [ ] during playback will pause, and the frame displayed at the point pause mode was entered will be displayed on the screen. Press [ ] again to return to normal playback mode.

Repeat Mode

Press the [REPEAT] button to select from the following repeat modes.

DVD Playback Modes:

Repeat 1 - Repeat All- Repeat Off While in DVD playback mode, pressing the [REPEAT] button once causes the current chapter to be replayed. Pressing it twice enables the DVD disc to be continuously replayed.

CD Playback Mode

Pressing the [REPEAT] button once causes the current track to be replayed. Pressing it twice enables the disc to be continuously replayed.

Viewing Angles

The Angle Mark appears during scenes that offer multiple viewing angles. (Not all DVD discs support this function.) Use the [ANGLE] button to select from the various angles available.

Page 12

Monitor Control Panel Layout
1. 2. 3. 4. Power Button Switches the OHMD74 ON/OFF. Play/Pause Button Begins and pauses playback Stop Button Press to stop playback Rewind Button Use for high speed search within a chapter or track. Moves the cursor left and right within the menu. Eject Button Ejects Discs Forward Button Use for high speed search within a chapter or track. Moves the cursor left and right within the menu. Mode Button Press to change the screen format: Normal, Full, Zoom, and Wide. Menu Button Press the menu button to access the monitor adjustments. Source Button Switches Audio/Video Sources

Page 13

10. + Button Selects the items to be adjusted 11. FM ON/OFF Button Press to turn ON/OFF FM Modulator 12. Button Selects the items to be adjusted

Page 14

Opening the Overhead Monitor
Press the OPEN button to release the overhead monitor. Gently push down on the bottom of the monitor until it reaches the desired position. The monitor will turn on automatically when it is fully open.
Note: The vehicles ignition key must be ON or Accessory position for the monitor to have power.

Page 15

Closing the Overhead Monitor
Gently push the backside of the monitor until it clicks into the overhead monitor housing. The monitor will turn off automatically when it is returned to the closed position. Note: Do not place any objects between the monitor and the monitor housing, this can result in serious damage to the monitor.

Setting the Screen Mode

The OHMD74 has 4 different screen modes: NORMAL, FULL, ZOOM, and WIDE. Pressing the MODE button on the front control panel or the remote control can access the different screen modes. The current mode is displayed on the screen first. Each time the MODE button is pressed, the screen mode switches in the following sequence:

Page 16

Note: The screen mode will set after 5 seconds, pending that the MODE button is not pressed. The display image may appear coarse or grainy when viewed in Zoom mode.

Page 17

MP3 Playback On CD
What is MP3? MP3 is an audio compression method. This audio compression method has become a standard format with many PC users. MP3 allows the original digital audio data to be compressed to about 10 percent of its initial file size while still retaining high sound quality. This means that about 10 music CDs can be recorded on a CD-R disc, thus allowing longer listening time without having to change CDs.
Precautions When Creating an MP3 Disc
Supported MP3 File Formats: 1. ISO 9660, 9006 level 1 and level 2 (the most common type of MP3 format) 2. Joliet (a version of ISO 9660, 9006 that supports longer file names) 3. Romeo (a format used by some CD-creating software)

File Extensions

Always add a file extension.MP3 or.mp3 to an MP3 file by using single-byte letters. If you add a different file extension, or forget to add the file extension.MP3 or.mp3, the file cannot be played. In addition, if you use upper case and lower case letters (capital and small letters) mixed together for file extensions, normal play may not be possible.

Page 18

File and Folder Structure
The folder name and file name can be displayed as the title during MP3 play. However, the title must be within 31 and 27 single-byte alphabetical letters and numerals for the folder name and file name, respectively (not including an extension). Entering more letters or numerals than specified may cause an incorrect display. A disc with a folder having more than 8 hierarchical levels will conflict with MP3 system requirements and playback will be impossible. A total of 255 filers and folders are allowed. When the number of and folders is more than 255, playback of tracks in excess of that number is impossible. There is a maximum of 31 files in each folder. File tracks are played in the order that they were recorded onto a disc. (Files might not always be played in the order displayed on the PC.)

Sound Quality

Some noise might be audible - this depends on the type of encoder software used while recording. It is not noise created by the OHMD74.

Bit Rates

The OHMD74 supports the following bit rates: 32kHz, 44.1kHz, 48kHz, and 96kHz. In case of a track recorded at VBR (variable bit rate), the display for the play time of the track may be slightly different from the actual playtime. Also, the recommended value for VBR ranges from 32 kbps to 320 kbps.
ID3V1 and ID3V2 Tags Support
Both ID3V1 and ID3V2 tags are supported. These allow up to 30 characters per song name and 30 characters per artist name.

Page 19

Remote Control
1. Power Button Turns the monitor ON/OFF. 2. 0-9 Buttons Used with various functions 3. ILL/Goto Button Enables direct access to a defined point within a track or chapter during playback. 4. Stop Stops playback. 5. Fast Reverse/Fast Forward Use for high-speed search within a track or chapter. Moves the cursor left and right within the menu. 6. Next/Previous Steps to the next or previous chapter/track. Moves the cursor up and down within the menu. 7. Subtitle Button Accesses the various subtitle functions on the DVD discs with multilingual support. 8. Setup Button Accesses the SETUP menu of the OHMD74 9. Title Button Accesses the TITLE menu of the DVD disc. 10. Display Button Display or conceals the on-screen display status line during playback. 11. Repeat Button Selects among the three repeat modes, 1, all, and off. 12. Play/Pauses Button Begins and pauses playback.

Page 20

13. Input Button Switches between the internal disc player and the auxiliary audio/video input. 14. Enter Button Used to select a highlighted menu item. 15. Audio Button Accesses the various language audio tracks on DVD disc with multilanguage support. 16. Angle Button Selects among the various camera angles on DVD discs with multi-angle support. 17. Menu Button Accesses the MAIN menu of the DVD. 18. FM Button Switches ON/OFF the FM Modulator 19. Mode Button Press to change the Screen Format 20. Eject Button Ejects the Disc 21. Button Selects the items to be adjusted

Page 21

Page 22

Settings and Adjustments

This chapter describes how to setup and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup menu, you can do the initial setup, adjust the picture quality, and set the various outputs. You can also set a language for the on-screen display, the setup display and limit playback by children. 1) Press the SETUP button to display the "setup menu" on the display screen. 2) Select the main item you want using the cursor buttons and then press the ENTER button. To Cancel Using the Setup Display Press the SETUP button on the remote. Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio). Press and then use the cursor buttons to select the appropriate settings. 4:3 / PS (Pan + Scan) This displays the wide picture on the -- GENERAL PAGE -screen with a portion of the left & right side TV DISPLAY NORMAL/PS removed. ANGLE MARK NORMAL/LB OSD LANG WIDE 4:3 / LB (Letter Box) CAPTIONS This displays the wide picture with black MAIN PAGE bands on the upper and lower portions of the screen. 16:9 GENERAL SETUP This displays a picture with black bands on the upper and lower portion of the screen. Then press ENTER to confirm your selection.

Page 23

Setting the Language for On-Screen Display Press the SETUP button and using the cursor buttons select "OSD LANGUAGE". OSD (On-Screen Display) Language Menu The OSD Language Menu allows the -- GENERAL PAGE -user to select the language for the onTV DISPLAY screen display. Press and then use TV TYPE the cursor buttons to select the desired ANGLE MARK ENGLISH OSD LANG language. The user can select either CAPTIONS CHINESE English, Chinese, French, Japanese or FRENCH JAPANESE MAIN PAGE Spanish for the OSD language.

SPANISH SET OSD LANGUAGE

Defaults Settings Press the SETUP button and select Defaults. The DEFAULTS SETUP allows you to reset ALL options to factory defaults. -- PREFERENCES PAGE -Press and then press Enter to implement the reset. AUDIO SUBTITLE Note: This function will not effect the DISC MENU Parental setting. PARENTAL
PASSWORD DEFAULTS SMART NAV RESET

LOAD FACTORY SETTINGS

Page 24
Settings for Parental (Parental Control) This section of the SETUP Menu allows user to control the content of movie playback from G to Adult. The Parental Control function allows you to limit viewing to your preference. 1. Use the cursor buttons to select from: G (Children) -- PREFERENCES PAGE -PG AUDIO 1G PG 13 SUBTITLE 2 R DISC MENU 3 PG PARENTAL 4 PG-13 NC-17 PASSWORD 5 ADULT (Adult) DEFAULTS 6 PG-R SMART NAV 7 NC-17 Note: The lower the value, the more 8 ADULT strict the limitation. SET PARENTAL CONTROL Press the Enter button to confirm the selection. 2. Input a password in 4 digits using the numeric buttons then press the Enter button. The Default password is 3308. Settings for Password (Parental Control Password) Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to change the parental control password. Press and then press Enter. OLD PASSWORD -- PREFERENCES PAGE -Input the old password or the default AUDIO password (3308). SUBTITLE NEW PASSWORD DISC MENU PARENTAL Input a new password (4 digits) using CHANGE PASSWORD numeric buttons. DEFAULTS SMART NAV CONFIRM PWD Confirm the new Ppssword by entering CHANGE PASSWORD the same new password again. Then press Enter to implement it.

Page 25

Playing Audio CDs
When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track and the amount of the time for that track playing, the total amount of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to display the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. Press DISPLAY 1x SINGLE ELAPSED appears along with the current track playing and the time of that track. Press DISPLAY 2x SINGLE REMAIN appears along with the current track playing the and the amount of time left. Press DISPLAY 3x TOTAL ELAPSED appears along with the current track playing the total time playing on the CD. Press DISPLAY 4x TOTAL REMAIN appears along with the current track playing and the amount of time left on the CD. Press DISPLAY 5x Turns off the DISPLAY Banner. Using the REPEAT Feature The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: REP-ONE - repeats the track that is playing. REP-ALL - repeats the disc that is playing. REPEAT OFF As you toggle through the options, the repeat option changes at that time. The tracks, for example, repeats once that tracks has ended. The selected repeat option loops repeatedly until you turn it off.

Note: Headphones are not to be worn by the operator of the vehicle when driving. Do not leave the headphones in a place subject to direct sunlight or extreme temperatures. If the headphones are exposed to direct sunlight for an extended period of time, the sensitivity of the IR receiver maybe affected causing poor sound quality. Allow headphones to cool off before using. Battery Installation 1. Slide the battery cover door downwards. 2. Insert new AAA batteries into battery holder following diagram inside the battery holder. 3. Slide the battery cover door back onto the headphones. Note: When the batteries become weak in the headphones, the audio can sound distorted or cut in and out.

Page 31

Installation
About the Installation The installation of the OHMD74 overhead monitor system requires experience in both mechanical and electrical procedures. If you do not posses the necessary experience or tools to attempt this installation, contact a local Clarion dealer for assistance. Improper installation can result damage to the monitor and/or the vehicle. This manual provides basic installation tips and techniques to aid in the installation of the OHMD74 overhead monitor system. The installation instructions are not vehicle specific, its a guideline on how to perform the installation. Prior to Beginning Installation Verify that all of the functions of the vehicle work properly (i.e.: power windows, power door locks, air conditioning, lights, etc.) Verify the monitor will not interfere with the operation of the sunroof, if applicable. Test fit the location of the overhead monitor system to ensure it will not interfere with the safe operation of the vehicle. Determine the location of the AV source(s). This unit is exclusively for vehicles with a negative ground, 12V power supply. Do not open the case, there are no serviceable parts inside. If you drop anything into the unit during installation, consult with your dealer or an authorized Clarion service center. WARNING! Be sure to disconnect the battery (-) negative terminal before starting. This is to prevent short circuits during the installation.

Page 32

Installation Procedure
1. Identify the polarity of the dome light circuit and set the switch on the bottom of the overhead monitor housing. 2. Test fit the overhead monitor system on the ceiling of the vehicle, verifying it is not going to interfere with the safe operation of the vehicle. 3. Once the mounting location of the overhead monitor system has been determined, carefully mark the location with masking tape. 4. Lower the vehicles headliner down to see if a roof support beam is available to screw the mounting bracket to. If a support beam is not available to screw into, use a piece of plywood cut to the appropriate size. Attach the plywood to the roof of the vehicle using silicone allowing adequate drying time. 5. Screw the mounting bracket in the vehicle. DOUBLE CHECK THE LENGTH OF THE SCREWS PRIOR TO MOUNTING THE BRACKET. 6. Cut a 1 hole in the headliner along the backside of the mounting bracket for the cables to pass through. 7. Route cables through the hole to the predetermined location of the AV source(s). 8. Identify the dome light wires in the vehicle and connect them to the corresponding dome light wires on the overhead monitor system. 9. Plug in the AV cables and power harness into the overhead monitor system.

Page 33

10.Carefully hold the overhead monitor system to the mounting bracket aligning the mounting holes while screwing in the screws. (Make sure the wires and cables are not in the way while mounting the monitor). 11. Connect the Red wire of the power harness to the Accessory wire in the ignition harness. 12.Ground the Black wire of the power harness to a clean ground spot. Note: Make sure you keep the ground wire of the OHMD74 and video source as short as possible to prevent any type of unwanted vehicle noise.

Page 34

Connecting Diagram
If you are uncertain as to what the proper connections are. Please contact a qualified Clarion technician for further installation assistance.
A/V Cable A/V Input Connector Pin Function 1 Audio Left Input 2 NC 3 Audio Right Input 4 NC 5 Video Input 6 NC 7 IR Output 8 NC GND A/V GND Shielding

Page 35

FM Modulator Cable A/V Input 8-Pin Connector Pin Function 1 NC 2 NC 3 NC 4 NC 5 FM Mod ON/OFF 6 Audio Left Output 7 FM Mod Ground 8 Audio Right Output GND A/V GND Shielding

Wiring the OHMD74

Read the following precautions before wiring your system. Disconnect the negative battery terminal before making any wiring connections. Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires. If the fuse blows, make sure all connections are correct and no wires are damaged before replacing the fuse. Always use fuses that are the same amperage value as the original. When replacing a fuse, never let the battery side touch any metal part or any other wire. WARNING! Always use great care when attaching anything to a vehicle! Visually inspect all sides of any potential screw location, to insure no damage will occur. If you have questions about this process, see your authorized Clarion dealer.

Page 36

Complete System Diagram

Page 37

Sample Installation
Warning! Make sure that the screws you use to mount the bracket, monitor, or optional spacers are not to long! If the screws are to long, they will damage the roof of the vehicle. Take great care when planning this part of the installation.

Page 38

Package Contents
1 OHMDAudio Video RCA Accessories 1 Audio Video Din Cables 1 Convenient External Game Port 1 Audio Output Din Cable 1 Three Pin Power Harness 1 Metal Mounting Bracket 4 Screws For Metal Mounting Bracket 1 Soft Black Rubber Gasket 1 Remote Control

Page 39

Troubleshooting
No Picture Press the POWER and SOURCE buttons to make sure the monitor is on and the proper input is selected. If there is still no picture press the PICTURE button. If the menu appears, check the source unit and video connections. If NO MENU appears, check all fuses and power connections to the OHMD74. No Picture and Sound Press the [ A/V ] button to make sure you are not in A/V output. Picture Rolls Check that the T.V. type setting is correct for the monitors and DVDs being used (see changing the Video Output mode). PAL video oftens rolls on NTSC monitors. NOTE: The OHMD74 has an operating temperature of apr. 5 degrees C to 40 degrees C (41 degrees F to 104 degrees F). If the temperature is outside this operating range, the unit will turn on, or the screen may be slow to react to image changes. The monitor will function normally once it returns to its proper operating temperature range. With a DVD player and a widescreen DVD disc, there are black bars on the screen. Change the TV display mode to WIDE in the DVD players setup menu. After changing this setting, if there are still black bars, press the MODE button on the OHMD74 remote control.

Page 40

With a widescreen 16:9 monitor, I have black bars on the screen? Change the T.V. display mode to Wide. Unit does not eject? Make sure the OHMD74 is powered ON

Specifications

Supply: 12V DC (10V-16V) Test Voltage: 12V, Negative Ground Current Consumption: 1.8 Amp Max Current Consumption: 2 Amps Operating Temperature: 0 ~70 C Storage Temperature: -30 ~80 C Video System: NTSC Screen: 7" Diagonal Resolution: 1440(W) x 234(H) Weight: 5.2 lbs Video Signal: 1Vp-p with 75-ohm load

Page 41

WARRANTY INFORMATION
This product is warranted against all defects in material workmanship for a period of one year from the date of original purchase. Clarion ProAudio products, except for speakers, are covered by a two year limited warranty when installed by an authorized Clarion dealer. The conditions of this limited warranty and the extent of responsibility of Clarion Corporation of America (Clarion) under this limited warranty are as follows: 1. PROOF OF DATE OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE OF THIS PRODUCT. IN THE CASE OF THE TWO (2) YEAR LIMITED WARRANTY FOR CLARION PROAUDIO PRODUCT, PROOF OF INSTALLATION BY AN AUTHORIZED DEALER IS REQUIRED. INFORMATION ABOUT CLARION AUTHORIZED WARRANTY SERVICE CENTERS MAY BE OBTAINED BY CONTACTING OR WRITING CLARION AT THE ADDRESS LISTED BELOW. 2. This limited warranty will become void if service performed by anyone other than an approved Clarion Warranty Service Center results in damage to the product. 3. This limited warranty does not apply to any product which has been subject to misuse, neglect or accident, or which has had the serial number altered, defaced or removed, or which has been connected, installed, adjusted or repaired, other than in accordance with the instructions furnished by Clarion. 4. This limited warranty does not cover car static or other electrical interferences, tape head or laser pick-up cleaning or adjustments, or labor costs for the removal or reinstallation of the unit for repair. 5. The sole responsibility of Clarion under this limited warranty shall be limited to the repair of the product or replacement of the product, at the sole discretion of Clarion. 6. Product must be shipped in its original carton or equivalent carton, fully insured, with shipping charges prepaid. Clarion will not assume any responsibility for any loss or damage incurred in shipping.

Page 42

7. ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES SHALL CLARION BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. 8. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 9. Should you have any dificulties with the performance of this product during the warranty period, please call or visit our web site for a listing of Authorized Warranty Service Centers in your area. You may also contact the Clarion Customer Service at the address listed below for any service help you may need with Clarion products.
CLARION CORPORATION OF AMERICA ATTN: CUSTOMER SERVICE MANAGER 661 WEST REDONDO BEACH BLVD. GARDENA, CA - 800 - GO - CLARION (310) 327 - 9100 www.clarion.com

Page 43

Page 44
CLARION CORPORATION OF AMERICA 661 WEST REDONDO BEACH BLVD. GARDENA, CA 90247 www.clarion.com

Multimedia

Multimedia Technologies
Complete Line-up of ProAudio Multimedia Products
VRX935VD 1-DIN In-Dash 7" Fully-Motorized LCD Monitor with DVD Player
A full-featured in-dash multimedia unit with touch-panel control of all main operating features. Enjoy playback of AM/FM, DVD, audio CD, VCD, and MP3 formats. Add a Sirius Satellite Receiver, DVD or CD Changer, TV Tuner, and a 5.1 surround processor for a full in-car surround system. The unit also sports a dedicated camera input for Clarions CK425E Rear Vision Camera Kit. Aesthetically, the unit features Clarions exclusive V-Matrix Graphics.
VCZ625 6-Disc DVD Changer
Load up entertainment for the long haul. Clarions DVD Changer accepts six discs, so you can keep your passengers smiling with up to six movies, or mix in some of your favorite CDs or MP3s for a change of pace.
Comprehensive Rear Entertainment Line-up
Clarions overhead monitors allow rear-seat passengers to enjoy visual entertainment without taking up precious space. The headrest monitors let rear-seat passengers enjoy visual entertainment in the most natural viewing position. Or with a monitor stand or headrest bracket, it is possible to place the screen on an arm rest or other part of the car, increasing viewing possibilities. Clarion also offers a Source Commander A/V switcher and wireless headphones to get the entertainment precisely to the passenger who wants it.
VRX745VD 1-DIN In-Dash 7" Fully-Motorized LCD Monitor with DVD Player
Similar to the VRX935VD, the VRX745VD a flipdown 7" monitor with an integrated DSP tuner and a flip-down, fully detachable faceplate differs in that it boasts a true singleDIN chassis (no hideaway box). The unit also differs aesthetically in that it sports an attractive piano-like finish on the faceplate.
VRX630 1-DIN In-Dash 6.5" Motorized LCD Monitor with Changer Control
A flip-out display with an AM/FM tuner on the units A/V input can be used with a stand-alone DVD player, or can control a 6-disc DVD changer.
Surround Sound Technologies
5.1-Channel Dolby Digital/dts Surround
Dolby Digital and dts provide three channels of front sound, together with two rear surround channels and a dedicated low frequency channel for a subwoofer. This combination can reproduce the dynamic sound field of a movie theater in the confined space of the average vehicle. A built-in 1/3-octave parametric equalizer is also included, allowing for three bands of independent adjustment for the front, rear and center channel speakers. There are settings for frequency, gain, and Q (how the slope of the adjusted frequency is affected). Either pink noise or audio material can be used to set the EQ. Also included are seven different DSP surround settings (such as Club, Theater, etc.) to help create a bigger sound stage, as well as a digital time alignment option to set speaker delays to compensate for sonic discrepancies caused by the vehicles interior. The DVH940 also includes Dolby Pro Logic II decoding. Dolby Pro Logic II is the first processor to produce 5.1 surround sound from ANY stereo source, including FM, CD, MP3 or VHS movie audio tracks. Now you can experience true you are there audio performance. Dolby Pro Logic II in the DVH940 generates front, center, surround, and subwoofer outputs for a true mobile surround sound system. For audiophile sound quality, the DVH940 uses 24bit D/A converters for low distortion audio and delivers the 5.1 surround signals through 4-volt, 6-channel RCA line-level outputs.

Dolby Pro Logic II

While standard Dolby Digital and dts require specially encoded software to reproduce 5.1-channel surround sound, Dolby Pro Logic II can create a complete 5.1-channel surround sound effect from ANY 2-channel source. The sound decoding technology can be found in Clarions DXZ945MP, a high-end source unit featuring Clarions exclusive AC Processor III technology. If your favorite movie is only in stereo, or you are listening to CDs, MP3s or even Sirius Satellite radio, Dolby Pro Logic II will give you a full 5.1channel surround sound effect. It features a phantom center-channel mode that simulates a center channel, creating a quasi 5.1-channel sound field from just the four standard speakers of a car audio system.
The DVH940 Dolby Digital/dts/Dolby Pro Logic II Processor
The DVH940 incorporates Dolby Digital, dts, and Dolby Pro Logic II processors, a parametric equalizer, crossovers, digital sound field settings and digital time alignment adjustments The DVH940 processor has selectable crossovers for the front, center, rear and subwoofer channels at 50/80/120Hz. To aid in setting proper speaker levels, all channel gains are independently adjustable using a built-in pink noise generator for proper level setting. Along with the adjustable gain settings, the center and subwoofer channels volume can also be adjusted separately to allow for different source material.

Expandibility

CeNET Technology
CeNET is an exclusive Clarion feature that easily allows system upgrades and expansion without complicated wiring or programming. Start with the VRX935VD, an in-dash DVD player with motorized 7-inch LCD. CeNET allows for the seamless integration of Clarions VCZ625 DVD changer, DVH940 5.1-channel surround sound processor, TTX7501z TV tuner, and the SIRCL1 Sirius Satellite Receiver. CeNET can run up to two changers (audio and DVD) using the CCA519 Y adapter cable. CeNET components will also display functions on the main viewing screen, such as CD titles, Sirius Satellite Radio channel information, and radio or TV station names that you program into the system, as well as MP3 ID3 tags (on units that read MP3 files). CeNET also has balanced line audio. This results in dynamic noise canceling, making the CeNET system virtually noise free. All audio signals and power/trigger wires are in the CeNET cable, eliminating the need for separate runs of RCA cables or power wires, making the installation much easier.

2-Zone Entertainment

The VRX935VD allows an external video source, such as a DVD player, game station, or a VCR, to be viewed on a rear-seat monitor. In this mode, the front passengers can enjoy the radio, a DVD movie, or MP3s independently from the rear seat passengers. The rear seat passengers can listen to the audio through wireless headphones.
Additional Video Inputs on VRX935VD
The VRX935VD is equipped with two audio/video inputs (i.e., one RCA and one CCA389) and a dedicated Rear Vision Camera input. Clarion has several different audio/video sources to choose from, from TV tuners, single-DIN DVD player, 6-disc DVD changer, rear vision camera, and a videocassette recorder. For those looking for additional entertainment, a video game station can be added as well.

Loop-Back Capability

The VRX935VD has a Loop Back feature that lets you use the above units internal amplifier to power the front and rear speakers. This eliminates the need for outboard power amplifiers when the DVH940 processor module is connected. This feature lets you design a cost-conscious 5.1-channel surround sound system using the new SRK5 powered center-channel speaker, along with a subwoofer amplifier and subwoofer.

Video Performance

High-Resolution LCD Screen
All Clarion display screens use the latest in active matrix LCD technology to give you the brightest, most detailed image available. Thin Film Transistors (TFTs) are attached to each RGB, (red/green/blue) pixel to provide more control over the color being reproduced. This method helps reduce display white-wash associated with a conventional passive-matrix screen, and insures optimal picture quality from any viewing angle. Clarion video monitors utilize high-resolution active matrix screens. By employing a striped pixel configuration to align RGB pixels into columns, we can use more pixels to enhance details and provide better color definition. Having the controls for brightness on the front panel allows easy adjustment of picture quality.

Design and Interface

Touch-Panel Operation
With the VRX935VD and VRX745VD, you can enjoy touch-screen control of all major system functions. Both units control audio, radio, DVD/CD Changer and TV, and add control of Sirius Satellite Radio and even 5.1-surround sound settings when linked to the DVH940. The settings can be adjusted by simply touching the unique honeycomb-shaped (VRX935VD) Touch Buttons on the screen.
Fully Motorized In-Dash 7-Inch Monitor on the VRX935VD and VRX745VD
VRX935VD and VRX745VD feature a large 7-inch monitor with a fully motorized mechanism that opens and closes at a touch of a button. The tilt angle and distance from the dashboard to the screen can be adjusted for maximum visibility. The monitor will also remember the setting when used the next time.
Customizable V-Matrix Graphics
The VRX935VD has eight selectable background colors and several motion display modes. These background colors and motions allow for customization or matching the display to the vehicle interior. This feature can also highlight the music being enjoyed through the source unit as well.
Faceplate Design as Sub-Display When Monitor is Closed
The display panel on the top of the monitor becomes a display for current playback source information while the monitor is retracted. This handy feature displays Play Time during CD playback, and the radio channel during AM/FM tuner reception. It will also display ID3 tags while listening to MP3s and Sirius Satellite Radio channel information when a Sirius receiver is connected. When the monitor is extended, the front display turns off to prevent light from reflecting onto the windshield.

Partial DCP

The control button section can be detached with a release button for your protection against theft. On the VRX935VD and VRX745VD, the screen automatically closes when you detach the face panel and opens again when the faceplate is placed back on.

Audio Performance

Beat EQ for Precision Tone Control

Clarions Pro Audio VRX745VD has a Beat EQ selector. This feature has three preset EQ curves, and a User position which allows a three-band parametric EQ to be used. Each band (Low, Mid and High) has selectable frequencies, adjustable gain and selectable Q (width of frequency adjustment).
Half-DIN Center-Channel Speaker
Last year Clarion introduced a new concept in 5.1 surround center-channel speakers: a half-DIN application that makes installing a center channel speaker a snap. With its included outboard amplifier, the SRK5 can be added to any system with ease. When coupled with the VRX935VD, VRX745VD, DXZ945MP or DXZ745MP, and the DVH940 5.1 processor, you can use the Loop Back Circuit in the above units to power the front and surround channels and the SRK5s amplifier for the center channel, a cost conscious system can be assembled. All thats needed is a subwoofer and a subwoofer amplifier to complete your surround sound system.

Z-Enhancer

The Z-Enhancer in the VRX630 acts as a super loudness compensation EQ. You can choose one of three different EQ curves. The first boosts the low frequencies, the second boosts the high frequencies, and the third boosts both the low and high frequencies.
24-Bit Digital-to-Analog Converter
Clarions 24-bit D/A converter in the VRX935VD eliminates the signal defects of older 16-bit decoding by actually oversampling the digital signal. This greatly improves overall sound quality of the D/A converter, creating a more natural sound, and better imaging. A 24-bit D/A converter greatly reduces linearity errors and notch distortion, which results in superior sound and high signal-to-noise ratios for less reproduced noise.
4-Volt Preamplifier Output
A 4-volt low impedance (less than 300 ohms) output in our ProAudio source units and processors minimizes the possibility of a clipped and distorted output signal. This results in a much cleaner musical signal sent to the power amplifier, so the amplifier reproduces a cleaner high-level signal. The end result is musical reproduction with extended dynamic range and more headroom.

Rear-Seat Entertainment

Wide-Screen Flip-Down Color LCD Monitors
Four new OHM overhead video screens are available this year: the OHM153 (15.3" widescreen monitor), OHM102 (10.2" widescreen monitor), OHMD74 (7" widescreen monitor), and OHM74 (7" wide-screen monitor). Clarion's OHMD74 does go a step further, offering a built-in DVD player that features CD/CD-R/RW/DVD(+/-)R/RW/MP3 playback. Clarion's OHM102 also differs from the other overhead monitors, offering a swivel mechanism that ensures optimal picture viewing. Sharing common features, each overhead monitor offers multi-picture formats (16:9/4:3), and a highresolution TFT (Thin Film Transistors) activematrix display to ensure the cleanest and brightest pictures available. The overheads also offer easy adjustment of color, tint, brightness and dimmer functions, two A/V inputs, one video input, an external A/V game port, and a dual IR audio transmitter for the two included wireless headphones (OHM74 utilizes a single IR audio transmitter for the included wireless headphones). Each monitor also touts a built-in IR receiver, which allows for multi-monitor control using a single remote. The monitors also offer the option of adding a TV Tuner, and an FM modulator, allowing one to achieve a complete standalone rear-seat entertainment package.

Wide-Screen Headrest Color LCD Monitors
New this year are two LCD video monitors for headrest installations. The VMA7194/VMA5894 7" and 5.8" wide-screen 16:9/4:3 monitors also have many of the unique features found in the overhead models, such as a high-resolution, TFT (Thin Film Transistors) active-matrix displays, two A/V inputs, one video output, an included external A/V game port, and two IR audio transmitters for use with the optional WH204 wireless headphones.They both include a slim, easy-fit universal mounting bracket for use in variety of installations.

Multi-Zone Systems

Clarions multi-zone product allows the ultimate in system design and flexibility. The MSS430 Source Commander is a combination audio and video switcher with a built-in video distribution amplifier for excellent video performance on up to three LCD monitors. Its four audio inputs have individual gain to controls to match audio source levels. It can accept up to four different audio/video sources (Example: DVD, VHS, TV tuner, video game, rear vision camera, or video camera) and send the audio and video to any of three monitors and headphones independently. The possibilities are endless. And by using our wireless headphones, installation is a breeze. With multi-source switching, any one of four audio/video sources can be selected independently for each video monitor. For example, each back seat or overhead monitor can have its own audio/video program, controlled from a wired remote control station. The line level output can feed any of our WH104/WH204/WH105 wireless headphones, or the AUX inputs on any source unit or equalizer.

Screen Technology

All Clarion video monitors utilize high-resolution video-grade active matrix screens. By employing a "stripped pixel" configuration to align RGB pixels into columns, more pixels are used to enhance the details and provide better color definition. TFT's are attached to each RGB (red/green/blue) pixel to provide more control over the color being reproduced. This method helps reduce "white wash" associated with conventional passive matrix screens.
Accessories to Make Your Multimedia System Complete
Video Mounting Accessories
Clarion has the video accessories to complete or complement any video system. Since vehicle leasing has often been the excuse why rear seat entertainment is overlooked, Clarion has several optional video mounting accessories. These accessories do not require any modifications to the vehicles interior, and no holes need to be drilled for mounting. The ZMT100 is a pedestal mount that can be attached with double sided tape to the center console or dashboard. The PQE023 attaches to the headrest bars of the seat. And the ZMT009, an adjustable gooseneck mount, can be attached to ant seat bolt. A leased vehicle will no longer be an excuse for not having rear seat entertainment.

Rear Vision Camera

Clarion has thought of it all, including a rear vision camera. This camera can be used to reduce blind spots often associated with SUVs or motorhomes. The camera can be also used to aid in backing up or parallel parking. The cameras iris can make darkness look like daylight, allowing the camera to be used at all times of the day or night. With quality construction of Clarion rear vision camera, it can withstand what ever Mother Nature can throw at it.

TV Tuners and Antennas

To complete the multimedia line-up, Clarion has TV tuners and matching antennas. The antennas offer the best possible reception with glass mount amplified diversity antennas. With the complete line-up of multimedia products and accessories, Clarion has something to satisfy everybody.

Video Amplifier

In video applications when a single video source is used with multiple monitors, the VA700 video amplifier prevents video signal loss. When the video is split to to many monitors using y-cables, the signal is weakened and the picture become dark. The VA700 allows a single video source to be used with up to seven monitors while retaining excellent picture quality.

Multimedia Applications

VRX935VD 5.1 Surround-Sound System Diagram

VRX935VD DVH940

Data Cable SRK5 Amp
Subwoofer Audio Out Preamp Outputs Visual 1 L/R audio in Visual 1 Video in Tuner Visual 1 Video in DVD Visual 2 A/V Speaker out CCD Diversity Antennas

TTX7501z

Front/Rear Audio Out

Tuner/Amp unit

SA200 Antenna

VCZ625

SIRCL1
XW1000 CeNET Line Level Audio Signal Video Signal Fiber Optic Digital Speaker Signal APX640.4 APX320.2 SRR1685 x 4
VRX935VD 5.1 Surround Sound Loop-Back System Diagram
Front/Rear Audio Out from DVH940 Preamp Outputs Visual 1 L/R audio in Visual 1 Video in Tuner Visual 1 Video in DVD Visual 2 A/V Speaker out CCD

Subwoofer Audio Out

NOTE: Set in/out switch on Tuner/Amp unit to IN.
Tuner/Amp unit XW1000 APA2001 SRR1627 x 4
CeNET Line Level Audio Signal Fiber Optic Digital Speaker Signal

VRX935VD Two-Zone System Diagram

VRX935VD

Rear Monitor video out
To send video game video to rear monitor, press Adj. button, then touch Rear Lock to watch video game on rear monitor, while watching a DVD or listening to audio on front screen/unit.
Data Cable Preamp Outputs Visual 1 L/R audio in Visual 1 Video in Tuner Visual 1 Video in DVD Visual 2 A/V Speaker out CCD Video out

Video Output from game

Y-connector SRR1627 x 4 L/R Audio output from video game player

Video Game Player

Line Level Audio Signal OHM74, OHM102, or OHM153 Video Signal Speaker Signal

Headphones

VRX745VD Complete Multimedia System Diagram

VRX745VD DVH940

SRK5 Amp
L/R Line-Level Audio Inputs Video Game Player
Diversity Antennas (ZCP104) SA200 Antenna

CCA519 Y Cable

DCZ625 XW1200
APA4300HX OHM153 XW1200 SRS1685 x 4
APA4300HX CeNET Line Level Audio Signal Video Signal Fiber Optic Digital Speaker Signal
VRX745VD Basic Multimedia System Diagram

VRX745VD

DCZ625
SRR1685 x 4 CeNET Speaker Signal
VRX630 Rear-Seat Entertainment System Diagram

VRX630

RCA Video Input cable on rear of VRX630
CCA389 Cable SRR1627 x 4 TTX7501z
Front Video Out from TTX7501z to Video Input on rear of VRX630
VCZ625 Rear Video Out from TTX7501z to Video 1 Input on OHM74, OHM102, or OHM153
Front Video Out from VCZ625 to video portion of CCA389 Rear Video Out from VCZ625 to Video 1 input on OHM74, OHM102, or OHM153 OHM74, OHM102, or OHM153
CeNET Video Signal Speaker Signal
DXZ945MP/DXZ845MC/DXZ745MP/DXZ645MP Source-Unit 2-Zone A/V System Diagram
DXZ945MP, DXZ845MC, DXZ745MP, or DXZ645MP
Subwoofer line-level output
L/R Rear Zone line-level headphone output

Front Zone

SRR1685 x 4

VCZ625 XW1000 APX640.2

Rear Zone
For 2-Zone Audio/Video Operation: 1. Press Function button to select DVD changer. 2. Press and hold the Dual Zone (DZ) button for 1 second. 3. Audio from changer (on the CeNET) is sent to OHM74/102/153 and then to headphones. Rear seat passengers will watch video from DVD player and listen to audio on headphones. 4. Press Function button to select audio source from DXZ645/DXZ845MC/DXZ945MP/DXZ745MC (Tuner or CD player). Front seat passengers will listen to Tuner, CDs, or MP3s on front, rear, and subwoofer speakers. 5. To reverse audio zones, press the ISR button.

OHM74, OHM102, or OHM153

130 +/- 60 mV (10 kohms) 1.0 +/- 0.2 V (75 ohms) 1.0 +/- 0.2 V (75 ohms)
7" wide 336,950 1,440 x 234 DCP453
Multimedia VRX630 Information
General Specifications Power Requirement: Current Consumption: Weight: Dimensions (w x h x d): FM Tuner Specifications Frequency Range: Useable Sensitivity: 50 dB Quieting: Alternate Channel Selectivity: Stereo Separation: Frequency Response: 14.4 V 4.0 A 3.8 lb 7" x 1-15/16" x 6-3/16"
87.9 to 107.9 MHz 11 dB 17 dB 75 dB 35 dB 30 Hz to 15 kHz
Audio Amplifier Specifications Rated Power Output: 18 W x 4 (20 Hz to 20 kHz, 1 % THD, 4 ohms) Maximum Power Output: 184 W (46 W x 4) Speaker Impedance: 4 ohms (4 to 8 ohms) LCD Screen Specifications Screen Size: Pixels: Resolution: Replacement Faceplate:
VRX630 AM/FM CD CHANGER CONTROLLER,
MOTORIZED, 6.5" WIDE-SCREEN COLOR LCD MONITOR ProAudio Unit Motorized, 6.5" Wide-Screen Color LCD One-DIN Unit, No Hide Away Box Magi-Tune Tuner with 18 FM/6 AM Presets A/V Input with Optional CCA389 Cable CeNET Control of Optional TV Tuner, DVD Changer, and 6-Disc Audio CD Changer Station Titling Z-Enhancer 4-Channel RCA Line Level Output 280,800 Pixels 1,200 x 234 Screen Resolution 184-watt amplifier (46 W x 4) Detachable Faceplate IR Remote Control
6.5" wide 280,800 1,200 x 234 DCP457
Multimedia VCZ625/VS735 Information
VCZ625 6-DISC DVD/CD/CD VIDEO/MP3
CHANGER Slave or Stand Alone Operation CeNET 6-Disc DVD Mechanism Plays: DVD Video, CD Audio, CD Video, MP3 Encoded CD-R/RW, and dts Audio CD 24-Bit D/A Converter CD Text (Audio CD) Fiber-Optic Output for Use with DVH940 5.1 Dolby Digital/ dts Decoder/Processor 2-Channel RCA Line-Level Outputs for Stand Alone Use Automatic 2-Channel Mix Down of 5.1 Dolby Digital, dts, and dts CD Audio RCA Composite-Video Output x 2 Remote IR Eye Includes 16' CeNET Cable and 16' A/V Cable (for stand alone use) IR Remote Control General Specifications Power Requirement: Current Consumption: Weight: Dimensions (w x h x d): DVD Deck Specifications Format: Video System: Audio System: Video Specifications Output Level: Video System:
VS735 1-DIN IN-DASH DVD/CD/MP3 PLAYER
One-DIN In-Dash DVD Player Plays DVD Video, CD Audio, and MP3 Encoded CD-R/RW CD-R/CD-RW Playback Flip-Down Detachable Faceplate Adjustable Audio Gain Controller Vacuum Florescent Display with Illumination Control 24-Bit D/A Converter A/V Output Dolby Digital Optical Output for Use with DVH940 5.1 Surround Processor IR Remote Control ID3 Tag for MP3 Titles General Specifications Power Requirement: Current Consumption: Weight: Dimensions (w x h x d): DVD Deck Specifications Format: Video System: Audio System: Loading System: Mounting Angle: Video Specifications Output Level: Video System: Horizontal Resolution: Video Input Terminal: Audio Specifications Maximum Output: Frequency Response: S/N Ratio (A-wtd): Separation:

14.4 V Less than 3.0 A 3.5 lb 7" x 2" x 6-5/8"
14.4 V Less than 3.0 A 3.5 lb 9 -3/8" x 3-3/8" x 7-1/2"
DVD-Video Disc (Two Layer, Two Side) Standard NTSC MP3 I, MP3 II
DVD-Video Disc (Two Layer, Two Side) Standard NTSC MP3 I, MP3 II 8 cm or 12 cm Disc-Direct Loading 0 to +/- 30 degrees
1.0 V, 75 ohms 16:9 Letter Box, 4:3 Pan Scan
1.0 V, 75 ohms 16:9 Letter Box, 4:3 Pan Scan 500 lines 0.5 - 2.0 V, 75 ohms
Audio Specifications Maximum Output: Frequency Response: S/N Ratio (A-wtd): Separation:
1.8 V 20 Hz to 20 kHz 90 dB 80 dB
308 mV, +/- 3 dB 20 Hz to 20 kHz 90 dB 80 dB
Multimedia DVH940/DVC920 Information
DVH940 5.1 DOLBY DIGITAL/DTS/PRO LOGIC II AUDIO PROCESSOR
DVC920 5.1 AUDIO PROCESSOR CONTROLLER
Connects to DVH940 Processor Controls All Functions of DVH940 Contrast Adjust High-Visibility, Multi-Color Display Screen-Saver Mode
Stand Alone/Slave Hide Away Processor Decodes Dolby Digital, dts, dts Audio CD, and Dolby Pro Logic II Directly Controlled by VRX935VD, VRX745VD, DXZ945MP, and DXZ745MP Six Pre-Programmed Digital Sound Field Memories Individually-Adjustable Speaker Gains (LF, RF, C, LR, RR, and SW) Independent, 3-Band, Parametric EQ for Front, Center, and Rear Channels 50/80/120 Hz Selectable, High-Pass Crossover for Front, Center, and Rear Channels 50/80/120 Hz Selectable, Low-Pass Crossover for Subwoofer Speaker Time-Delay Settings 24-Bit D/A Converters 24-Bit A/D Converters 2-Channel RCA Line-Level Analog Input CeNET Analog Line-Level Input Two Digital Fiber-Optic Inputs Optional DVC920 Controller For Use With Any Source Unit General Specifications Power Requirement: Current Consumption: Dimensions (w x h x d): Audio Specifications Frequency Response: S/N Ratio: Distortion: Separation: Input Sensitivity (RCA): Max Output Voltage: Output Impedance:
14.4 V Less than 1.50 A 6-3/4" x 1" x 9"
20 Hz to 44 kHz, +/- 1 dB 95 dB (Digital Input) 0.01% (THD + N) 80 dB (Digital Input) 2 V (low), 1.2 V (mid), 0.6 V (high) 4V 330 ohms
Multimedia VMA7194/VMA5894 Information
VMA7194 7" WIDE-SCREEN HEADREST COLOR LCD MONITOR
VMA5894 5.8" WIDE-SCREEN HEADREST

COLOR LCD MONITOR

Slim, Easy-Fit Universal Mounting Bracket (Included) TFT Active Matrix Display With 16:9/4:3 Format On-Screen Display (OSD) Two A/V Inputs Convenient External A/V Game Port (Included) Built-In Dual IR Audio Transmitter for (Optional) WH204 Headphones Built-In IR Receiver Front Panel Controls for Power, Source, and Picture Specifications Power Requirement: Current Consumption: Brightness Level: Viewing Angle: Pixels: Resolution: General Specifications LCD Type: Screen Size: Weight: Dimensions (w x h x d): Video System:
12 V 0.8 A 400 L/R 60/60 degrees U/D 30/40 degrees 336,960 1,440 x 234
12 V 0.8 A 360 L/R 50/50 degrees U/D 15/35 degrees 280,x 234

Color TFT, Active-Matrix 7" Wide 1.5 lb 7.21" x 5.04" x 1.41" NTSC/PAL
Color TFT, Active-Matrix 5.8" Wide 1.5 lb 6.33" x 4.53" x 1.41" NTSC/PAL
Multimedia OHMD74/OHM74 Information
OHMD74 THIN, 7" WIDE-SCREEN, FLIP-DOWN,
COLOR LCD MONITOR WITH BUILT-IN DVD PLAYER
OHM74 THIN, 7" WIDE-SCREEN, FLIP-DOWN, COLOR LCD MONITOR
Plays CD, CD-R, CD-RW, DVD +/- R, DVD +/- RW, and MP3 Formats Easy-Fit Universal Metal Mounting Bracket TFT Active Matrix Display With 16:9/4:3 Format On-Screen Display (OSD) Two A/V Inputs One Video Output Convenient External A/V Game Port (Included) Lightweight Plastic Housing IR Audio Transmitter for Wireless Headphones (Two-Piece WH104 Included) Front-Panel Accessible FM Modulator and Picture Adjustment Controls FM Modulator Control Cable (Included for Optional FM200) Remote Control Built-in Dome Lights Specifications Power Requirement: Current Consumption: Brightness Level: Viewing Angle: Pixels: Resolution: General Specifications LCD Type: Screen Size: Weight: Dimensions (w x h x d): Video System:
Easy-Fit Universal Metal Mounting Bracket TFT Active Matrix Display With 16:9/4:3 Format On-Screen Display (OSD) Two A/V Inputs One Video Output Convenient External A/V Game Port (Included) Lightweight Plastic Housing IR Audio Transmitter for Wireless Headphones (Two-Piece WH104 Included) Front-Panel Picture Adjustment Controls FM Modulator Control Cable (Included for Optional FM200) Remote Control Built-in Dome Lights
12 V 1.5 A 350 L/R 60/60 degrees U/D 40/55 degrees 336,960 1,440 x 234
Specifications Power Requirement: Current Consumption: Brightness Level: Viewing Angle: Pixels: Resolution: General Specifications LCD Type: Screen Size: Weight: Dimensions (w x h x d): Video System:
Color TFT, Active-Matrix 7" Wide 2.2 lb 8.86" x 9.65" x 2.24" NTSC/PAL
Color TFT, Active-Matrix 7" Wide 2.1 lb 8.86" x 9.57" x 1.81" NTSC/PAL
Multimedia OHM153/OHM102 Information
OHM102 THIN, 10.2" WIDE-SCREEN, FLIP-DOWN,
OHM153 THIN, 15.3" WIDE-SCREEN, FLIP-DOWN,
COLOR LCD MONITOR Easy-Fit Universal Metal Mounting Bracket TFT Active Matrix Display With 16:9/4:3 Format On-Screen Display (OSD) Swivel Mechanism Picture-In-Picture (PIP) Adjustable Split Screen for Dual IR Audio and Video Viewing Dual IR Audio Output for Two WH204 Wireless Headphones (Included) Two A/V Inputs One Video Output Convenient External A/V Game Port (Included) Lightweight Plastic Housing Remote Control Built-In Wireless Audio Transmitter Built-in Dome Lights

VDH910 VCR HI-FI VIDEO CASSETTE RECORDER W/TUNER
Built-in181-Channel TV Tuner RCA Inputs on Front and Rear Panels RCA A/V Output On-Screen Display (OSD) IR Remote Control Plug-in Remote IR Eye Dew and Heat Sensor Input/Output Loop-Through Hi-Fi Stereo Audio Automatic Digital Auto Tracking Auto Rewind Antenna: ZCB001 (not included)
Tape Deck Specifications Format: Scanning System: Antenna Input/Output terminals: Recording System: Playback System: Record/Play Time: Number of Channels:
Video Specifications Output Level: Frequency Response: Video Input/Output Gain: load) Input Sensitivity: Input Impedance: General Specifications Power Requirement: Fuse Rating: Dimensions (w x h x d):
1.0 V 39 Hz to 5.5 MHz 0 dB, +/-2 dB (75-ohm 0 V, +/- 20% 75 ohms
VHS 1/2" Standard Standard NTSC UHF/VHF 75 ohms F-Connector VHS (SL and SLP) VHS (SP, LP, and SLP) 6 Hours with T-120 on SLP 12 VHF Channels (2 to13) 56 UHF Channels (14 to 69)
10 to 13 V 1.6 A 9.84" x 1.06" x 5.24"
General Specifications Power Requirement: Current Consumption: Weight: Dimensions (w x h x d):
12 V 12 W (with Power On) 5.3 lb 10.4" x 3.7" x 10.2"
Control Station Specifications Dimensions (w x h x d): 1.70" x 2.60" x 0.60" Mounting Depth: 0.63" (behind panel) Mounting Hole Diameter: 1.90" x 2.80"
Multimedia CK425E/SRK5 Information
CK425E REAR VISION COLOR CAMERA KIT
Wide-Angle Lens Weather-Resistant Die-Cast Aluminum Chassis 1/4" CCD Imager Stainless-Steel Mounting Hardware Waterproof Mini-DIN Connection System Compact Size, Perfect for SUV Applications Includes MF23RM Cable and CAA188 Power Supply 9V Less than 200 mA 250,V (75 ohms) 115 degrees (horizontal), 99 degrees (vertical) 290 (horizontal), 270 (vertical) 1/4" 3 lux -4 to 140 degrees F Reverse 4.6 oz 1.9" x 1.4" x 1.8"
SRK5 1/2-DIN CENTER CHANNEL SPEAKER WITH AMPLIFIER
1/2-DIN Fixed Application Fits in all DIN and 1/2-DIN Installation Kits 50 W Amplifier 20 watts RMS RCA Audio Input Five 3/4" Full-Range, 4-Ohm Speakers in Sealed Enclosure; Two 1" Rear-Mounted, Midbass Reinforcement Speakers Ported to Enclosure Front Excellent Solution for 5.1 Surround Sound Systems
Specifications Power Requirement: Current Consumption: CCD Pixels: Video Output: Viewing Angle: Resolution: CCD Size: Low Light Rating: Temperature Range: Image Select: Weight: Dimensions (w x h x d):
Multimedia Accessory/Parts Information

HRM150

Headrest Mount for VMA6491, VMA6492, and VMA7191

RCB735

Replacement Remote Control for VS735
IR Wireless Headphone System (Two Headphones and Transmitter)

RCB9300

Replacement Remote Control for VDH9300

RCB9600

Replacement Remote Control for VDH9600

WH100H

Replacement Headphone for WH100
IR Remote Control for TTX001

WH100CH

Child-Size Replacement Headphone for WH100

CCA389

8-Pin DIN-RCA A/V Adapter Cable for MAX2256, VRX8271, VRX6671z, TVX5653, VRX610, VRX815, VRX925VD, VRX935VD, VRX835, VRX630, and TTX7501z
Two-Input IR Wireless Headphone System (Two Headphones and Transmitter)

WH200H

Replacement Headphone for WH200

CAA357

Stand Alone Adapter Kit for TTX7101 (Includes DIN-RCA Audio Cable); Also Requires RCB062 Kit, IR Sensor

WH200CH

Child-Size Replacement Headphone for WH200
FM Modulator, Two RCA Channel Inputs, On/Off Switch Included, and Adjustable Modulation Gain
RF Wireless Headphone System (Two Headphones and RF Transmitter)

RCB062

FM Modulator Kit for TTX7101 (Includes FM Antenna Cables and IR Remote)

WH105H

Replacement Headphone for WH105

ZCB001

Single-Pole Glass Mount Telescoping Antenna w/F-Connector
Plug-In IR Eye (Included with TTX001)

ZCB003

Single Pole TV Antenna, Outside Glass Mount

Y-Adapter for IR200

ZCB301
Dipole TV Antenna, Inside Glass Mount
Video Distribution Amplifier (One Input, Seven Outputs)

ZCP100

Amplified Four-Way Diversity-Antenna System

DCA-005

Fiber-Optic Cable, New Connector on Both Sides, 5 m

ZCP104

Four-Way Diversity Film Amplified Antenna

DCA-006

Fiber-Optic Cable, Old Connector on Source Side, New Connector for Black Box DVH920 Processor, 5 m

ZMT100

Universal Pedestal Mount

DCA-007

Fiber-Optic Cable, New Connector on Source Side, Old Connector for DPH910/DVS9755z, 5 m

ZMT009

Gooseneck Monitor Mount

DCA-008

Fiber-Optic Cable, New Connector on Both Sides, 1.5 m

PQE023

Headrest Mounting Arm for Monitors

RCB910

Replacement Remote Control for VDH910