VRX653R

Owners manual & Installation manual Mode demploi et manuel dinstallation Bedienungs- & Installationsanleitung Manuale dIstruzioni e dInstallazione Gebruiksaanwijzing en installatie-aanwijzingen Manual de instrucciones y de instalacin Bruksanvisning- och installations Manual do proprietrio e manual de instalao
6.5 MONITOR & RDS-EON FM/MW/LW RADIO WITH CD/ DVD CHANGER CONTROL MONITEUR DE 6,5 POUCES ET RADIO FM/PO/GO RDSEON AVEC COMMANDE DE CHANGEUR DE CD/DVD 6,5-ZOLL-MONITOR & RDS-EON UKW/MW/LW-RADIO MIT CD/DVD-WECHSLERSTEUERUNG MONITOR DA 6,5 E RADIO FM/MW/LW CON COMANDO CAMBIA CD/DVD 6,5 MONITOR EN RDS-EON FM/MW/LW RADIO MET AANSTURING VOOR CD/DVD-WISSELAAR MONITOR DE 6,5-PULGADAS Y RADIO FM/MW/LW RDSEON CON MANDO PARA EL CAMBIADOR DE CD/DVD 6,5-TUMS BILDSKRM MED RDS-EON FM/MV/LVRADIO OCH CD/DVD-VXLARSTYRNING MONITOR DE 6,5 POLEGADAS E AUTO-RDIO RDS-EON FM/MW/LW COM CONTROLO DO PERMUTADOR DE CD/ DVD

Clarion Co., Ltd.

2004/12 (AC)
All Rights Reserved. Copyright 2004: Clarion Co., Ltd. Printed in China / Imprim en Chine / Gedruckt in China / Stampato in Cina Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China

QC-6711E 280-8165-00

Thank you for purchasing the Clarion VRX653R.
This owners manual is for the VRX653R. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, DVD changer, TV tuner connected via the CeNET cable. The CD changer, DVD changer, TV tuner have their own manuals, but no explanations for operating them are described.

Contents

1. PRECAUTIONS.. 3 2. CAUTIONS ON HANDLING.. 4 LCD panel/Generalities.. 4 Cleaning... 4 3. CONTROLS.. 5 4. NOMENCLATURE.. 6 Names of Buttons.. 6 JOYSTICK Operation. 7 5. MODE DISPLAY.. 8 Display common to each mode.. 8 TITLE LIST mode display. 8 RADIO mode display.. 9 RDS mode display.. 9 CD Changer mode display. 10 TV mode display. 10 DAB mode display.. 11 DVD Changer mode display. 11 6. REMOTE CONTROL.. 12 Inserting the Battery. 12 Functions of Remote Control Unit Buttons.. 13 7. DCP... 14 8. OPERATIONS.. 15 Basic Operations. 15 Radio Operations.. 18 RDS Operations.. 20 CD Changer Operations. 23 DVD Changer Operation. 25 TV Operations.. 29 Digital Radio/DAB Operations.. 32 NAVI Operations. 37 CCD Camera.. 38 Connecting other companys image equipment.. 38 Other Functions.. 39 9. IN CASE OF DIFFICULTY. 41 10. ERROR DISPLAYS.. 43 11. SPECIFICATIONS.. 44

5. MODE DISPLAY

The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated.

1. PRECAUTIONS

WARNING
For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard.

2. CAUTIONS ON HANDLING

LCD panel/Generalities
For a longer service life, be sure to read the following cautions. Be sure to store the LCD panel inside the main unit when parking the car outdoors for long period of time. The LCD panel will operate properly in a temperature range of 0 to 60C. Dont allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. Do not disassemble or modify the set in any way. Doing so may result in damage. Do not draw the LCD panel out and use it as a tray. Also, subjecting the LCD panel to shocks may result in breakage, deformation or other damage. Do not let cigarettes burn the display. Doing so may damage or deform the cabinet. If a problem should occur, have the set inspected at your store of purchase. Do not insert objects or poke in the space between the LCD panel and the main unit when the panel is tilted. Do not place anything on the display when the panel is tilted. The remote controller may not work if the remote control sensor is exposed to direct sunlight. In extremely cold weather, the display movement may slow down and the display may darken, but this is not a malfunction. The display will work normally when the temperature increases. Small black and shiny spots inside the LCD panel are normal for LCD products. The LCD panel may stop temporarily when it opens or closes, when the engine stops or when it is cold.

English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus
CONTROLS / COMMANDES / REGLER / CONTROLLI REGELAARS / CONTROLES / KONTROLLER / CONTROLOS

4. NOMENCLATURE

Names of Buttons
Note: Be sure to read this chapter referring to the front diagrams of chapter 3. CONTROLS on page 5 (unfold).

JOYSTICK Operation

Notes: Many settings/procedures have to be performed by using the JOYSTICK. Be sure to read this chapter in order to operate it properly. In the DVD changer mode, items for menu display, etc. can be selected by operating the JOYSTICK upward, downward, leftward or rightward.
Main unit / Unit principale / Hauptgert / Unit principale Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principale
With the Display closed / Avec l`afficheur ferm / Mit geschlossenem Display / Con display chiuso / Met het display gesloten / Con el visualisador cerrado / Med bildskrmen stngd / Com o cran fechado

With the display closed

With the display open
G Selecting an item in the menu Select an item displayed in the menu by operating the JOYSTICK upward or downward. G Setting an option for the selected item When the setting options for an item are listed on the right of the display, you can choose the desired option by operating the JOYSTICK leftward or rightward. Then, press the center of the JOYSTICK to set your choice. G When push NEXT is displayed next to the menu item 1. Press the ENT at the center of the JOYSTICK to select the item and show the setting display for this item. 2. Operate the JOYSTICK upward or downward to select the desired setting option, then press ENT at the center of the JOYSTICK to set your choice.
1 PWR (POWER) button FNC (Function) button 2 SEARCH button VOLUME button a button d button 3 PLAY/PAUSE button 4 Information Panel 5 PS (Preset scan)/AS (Auto store) button SCN (Scan) button 6 DCP RELEASE lever 7 AF (Alternative Frequencies) button RPT (Repeat) button 8 PTY (Program Type) button RDM (Random) button 9 Z-EHCR (Z-enhancer) button 0 INFO (Information) button TA (Traffic announcement) button ! OPEN button @ DISP (Display) button # PRESET buttons (1 to 6) DIRECT buttons (1 to 6) $ MUTE button % BND (Band) button
Color LCD display & A-M (Audio-Mode) button * ADJ (Adjust) button ( TITLE button ) NVG (Navigation)/AV button JOYSTICK Remote Control Infrared Sensor
With the Display open / Avec l`afficheur ouvert / Mit geffnetem Display / Con display aperto / Met het display geopend / Con el visualisador abierto Med bildskrmen ppen / Com o cran aberto

G Returning to the previous mode Select the item MENU by operating the JOYSTICK leftward or rightward, then press the ENT at the center of the JOYSTICK.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez dplier cette page et vous rfrer aux schmas quand vous lisez chaque chapitre. Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten. Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo. Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken. Nota: Cuando lea los captulos, despliegue esta pgina y consulte los diagramas. Observera: Vik ut denna sida fr att kunna se figurerna ver bilstereons framsida medan du lser de olika kapitlen. Nota: Lembre-se de abrir esta pgina e consultar os diagramas frontais durante a leiture de cada captulo.

RADIO mode display

RDS mode display

CD Changer mode display

TV mode display
COLOR LCD DISPLAY INFORMATION PANEL MAIN

DAB mode display

DVD Changer mode display

COLOR LCD DISPLAY

While the car is moving, the screen below is displayed.

AUDIO PROGRAM ONLY

INFORMATION PANEL MAIN

No sub-indication

6. REMOTE CONTROL

When the panel is open

Operating range: 30 in all directions [FNC] [ ], [ ] [MUTE] [TA] [PS/AS]

Signal transmitter

[BND] [ ]
[a], [d] [DISP] [PTY] [AF]

Inserting the Battery

1 Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2 Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 3 Press the battery in the direction indicated by the arrow so that it slides into the compartment. 4 Replace the cover and slide in until it clicks into place. Notes: Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions: Use only the designated battery. When replacing the battery, insert properly, with +/ polarities oriented correctly. Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery. Dispose of used batteries properly.

Insertion guide

Functions of Remote Control Unit Buttons

Mode Radio (RDS) Button

[FNC] [BND]

CD changer DVD changer

Switches among Radio, DAB, CD changer, DVD changer and TV. Switches reception band. Moves to the next disc in increasing order. Switches reception band.

[w, z] [a, d]

Increases and decreases volume (in all modes). Moves preset channels up and down. No function. Turns mute on and off. TA on and off. Turns on and off the monitor. Turns on and off the monitor. DVD changer mode; When pressed and held for 1 second: Superimpose (Playback information is displayed.) When pressed and held with Superimpose on: Switches the screen sizes. Turns on and off the monitor. When pressed and held for 1 second: Superimpose (Playback information is displayed.) When pressed and held with Superimpose on: Switches the screen sizes. Preset scan. When pressed and held for 2 seconds: Auto store. No function. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/Fast-backward. Switches between playback and pause. Moves preset channels up and down. No function.

If a title has been input, it is shown in the SUB display. If no title has been input, --------- appears in the display. To input a title, refer to the subsection Entering titles in Other Functions section. For CD and TV, some special characters of the title, the PS name of the RDS, and the DAB service label will not be displayed on the Information Panel of the DCP. In this case, those characters will only be left blank. When CT data is not received, CT--:-- appears in the display.
When adjusting the angle of the display be careful no to let your fingers get caught by the panel or instrument panel of the vehicle. 3. To store the Color LCD display in the source unit, turn it to the horizontal position until a click is heard.

Showing a mode display

When the panel is open: Press the TITLE button ( to show the Title List display. In the Title List display, the titles of items stored in the PRESET buttons # 1 to 6 are listed.
In the RDS tuner mode, a PS name is displayed. In the DAB mode, a service label is displayed. For detailed information, refer to the section Title list play.
Turning on and off the monitor
Pressing the DISP button @ turns the monitor on and off.
When a button is pressed or during security monitoring, the monitor-off mode is canceled.
Opening and turning the display
Notes: Do not place any object on the open display. Do not drop any object on the movable part. Do not expose the display to shocks. 1. Press the OPEN button ! to open the Color LCD display. If the Color LCD display is left horizontally in the open position for 10 seconds or longer, it is automatically drawn in. 2. Turn the Color LCD display upwards to a good view angle.
Each time you press the MUTE button $, mute is turned on and off. MUTE appears when mute is turned on.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect stored in memory. Select the one you prefer.
The factory default setting is Z-EHCR OFF.
When the monitor is turned upwards, a picture appears in the display. The Information Panel 4 display disappears.
When a Z-enhancer comes on (1-3), Z-EHCR appears in the display. Z-EHCR 1 (Z-Enhancer 1): Setting emphasizing bass. Z-EHCR 2 (Z-Enhancer 2): Setting emphasizing treble. Z-EHCR 3 (Z-Enhancer 3): Setting emphasizing bass and treble. Z-EHCR OFF (Z-Enhancer off): Neither bass nor treble are emphasized by the Z-enhancer.
Do not turn the display unless it is completely open.
When the panel is closed: Each time you press the Z-EHCR button 9, the tone effect changes in the following order: Z-EHCR 1 Z-EHCR 2 Z-EHCR 3 Z-EHCR OFF Z-EHCR 1. When the panel is open: 1. Press the A-M button & to change into the AUDIO-MODE display. 2. Operate the JOYSTICK upward or downward to select Z-EHCR. Press the ENT at the center of the JOYSTICK to change into the Z-enhancer selecting display. 3. Operate the JOYSTICK upward or downward to select out of: TYPE 1 (Z-Enhancer 1) TYPE 2 (ZTYPE 3 (Z-Enhancer 3) Enhancer 2) OFF (Z-Enhancer off), and press the ENT at the center of the JOYSTICK to set a desired Z-enhancer. 4. When the setting is finished, operate the JOYSTICK rightward or leftward to move the cursor to the MENU. Then press the ENT at the center of the JOYSTICK to return to the AUDIO-MODE display.

G DX SEEK Press the right or left side of the SEARCH button 2 to automatically seek a station. When the right side of the SEARCH button 2 is pressed, the station is sought in the direction of higher frequencies; when the left side of the SEARCH button 2 is pressed, the station is sought in the direction of lower frequencies.
When seek tuning starts, DX SEEK appears in the display.
G LOCAL SEEK If you press and hold the right or left side of the SEARCH button 2 for 1 second, local seek tuning is carried out. Broadcast stations with good reception condition are selected.
When local seeking starts, LO SEEK appears in the display.

Manual memory

1. Press the BND button % and select the desired band. (FM or AM (MW/LW)) 2. Select the desired station with seek tuning, manual tuning, or preset tuning. 3. Press and hold one of the PRESET buttons # for 2 seconds or longer to store the current station into preset memory.

Manual tuning

There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press the BND button % and select the desired band. (FM or AM (MW/LW))
If MANU is not lit in the display (or when the panel is closed, if the indicator SRCH is lit), press and hold the BND button % for 1 second or longer. MANU appears in the display (or when the panel is closed, the indicator SRCH goes off) and manual tuning is now available.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Press the BND button % and select the desired band. (FM or AM (MW/LW)) 2. Press and hold the PS/AS button 5 for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
2. Tune into a station. G Quick tuning: Press and hold the right or left side of the SEARCH button 2 for 1 second or longer to tune in a station. G Step tuning: Press the right or left side of the SEARCH button 2 to manually tune in a station. Note: Manual tuning is cancelled if you do not operate the unit for 7 seconds or longer.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for desired station in memory. 1. Press the PS/AS button 5. 2. When the desired station is tuned in, press the PS/AS button 5 again to continue receiving that station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding PRESET button # recalls the stored radio frequency automatically. 1. Press the BND button % and select the desired band. (FM or AM (MW/LW)) 2. Press the corresponding PRESET button # to recall the stored station.
Press and hold one of the PRESET buttons # for 2 seconds or longer to store that station into preset memory.

RDS Operations

RDS (Radio Data System)
This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching). Also, if a traffic announcement or programme type information is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic renewal of other preset stations on the same network and interruption of traffic announcement and/or chosen program type from other stations (TP). This function is not available in some areas. When using the RDS function, always set the radio to FM mode. AF : Alternative Frequency PS : Programme Service Name PTY : Programme Type EON : Enhanced Other Network TP : Traffic Programme
RDS interrupt does not function during AM radio reception or in TV mode.
1. Press the ADJ button * to show the adjustment selection display. 2. Operate the JOYSTICK upward or downward to select LINKACT. 3. Operate the JOYSTICK rightward or leftward to select ON or OFF. After selection, press the ENT at the center of the JOYSTICK. G ON: AF switching between DAB and RDS enabled. G OFF: AF switching between DAB and RDS disabled. 4. Press the ADJ button * to return to the previous mode.
REG (Regional programme) function
When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received.
The factory default setting is OFF. Notes: This function is disabled when a national station such as BBC 2 FM is being received. The REG function ON/OFF setting is valid when the AF function is ON.

Pausing Play

1. Press and hold the PLAY/PAUSE button 3 to pause play. PAUSE appears in the display. 2. To resume play, press the PLAY/PAUSE button 3 again.

Random play

The random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled or the mode is changed. 1. When you press the RDM button 8, random play starts. RDM lights in the display. 2. To cancel random play, press the RDM button 8 again. RDM goes off from the display and the unit returns to normal play.
Slow Play (DVD video & video CD)
1. Press and hold the PLAY/PAUSE button 3 then press and hold the d button 2. While the button is being pressed, slow playback continues at the speed 1/2 times the normal playback.
Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback.

Disc random play

The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled or the mode is changed. 1. When you press the RDM button 8 for 1 second or longer, disc random play starts. D-RDM lights in the display. 2. To cancel disc random play, press the RDM button 8 again. D-RDM goes off from the display and the unit returns to normal play from the track being played.

Selecting a disc

1. Each of the DIRECT buttons # corresponds to a disc loaded into the magazine. 2. Press the corresponding DIRECT buttons # (1 to 6) to select the desired disc.
DVD Changer Operation Switching to a next disc(Disc Up function)
Press the d button 2, and playback starts from the beginning of the next chapter. Press the a button 2, and playback starts from the beginning of the current chapter. When this button is pressed again within about 2 seconds, playback starts from the beginning of the previous chapter. The unit may return to the menu screen when the right or left side of the SEARCH button 2 is pressed.
The disc up function plays from the first track (track No1) of the next disc. 1. Press the BND button %. 2. Each time you press the BND button %, the disc changes to the next disc.

DVD-Video Operation

Showing the DVD menu
1. Press the TITLE button ( during playback. The DVD menus appears. The displayed contents may differ, depending on the DVD software. Example showing menu display
Fast forward and fast backward
1. Press and hold the right or left side of the SEARCH button 2 during playback. Press and hold the button, and the playback speed becomes 4-time faster first and then 16-time faster 3 seconds later. Release the button, and the normal speed is restored. Notes: No audio is reproduced during fast forward and fast rewind operation. The fast forward and fast rewind speed may differ depending on the disc. The menu screen may appear when the button is pressed.

Using the title menu

On DVD discs containing two or more titles, you can select from the title menu for playback. 1. Press and hold the TITLE button ( for 1 second or longer during playback. The title menu screen appears. Press the TITLE button (, and playback resumes from the scene played back before TITLE button ( is pressed. Depending on the disc, the title menu cannot be called. 2. Operate the JOYSTICK upward, downward, leftward or rightward to select an item. Depending on the disc, items cannot be selected with the ten-key buttons on the DVD changer remote control unit.

Scan playback

Scans and plays back all chapters recorded on the DVD-Video, the first 10 seconds for each. 1. Press the SCN button 5. 2. Press the SCN button 5 again and scan playback is turned off.

Chapter repeat playback

This operation plays back chapters recorded on the DVD-Video repeatedly. 1. Press the RPT button 7. 2. Press the RPT button 7 again and repeat playback is turned off.
Skipping a chapter(searching)
About chapter Chapter means a small segment to divide the data area of the disc. 1. Press the right or left side of the SEARCH button 2 during playback. Chapters are skipped, as many as the times the button is pressed, and playback starts.

Title repeat playback

This operation plays back titles recorded on the DVD-Video repeatedly. 1. Press and hold the RPT button 7 for 1 second or longer. 2. Press the RPT button 7 again and repeat playback is turned off.

There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press the BND button % and select the desired band. (TV1 or TV2)
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory. 1. Press the PS/AS button 5. 2. When the desired channel is received, press the PS/AS button 5 again.
2. Tune into a station. G Quick tuning: Press and hold the right or left side of the SEARCH button 2 for 1 second or longer to tune in a station. G Step tuning: Press the right or left side of the SEARCH button 2 to manually tune in a station. Note: Manual tuning is cancelled if you do not operate the unit for 7 seconds longer.
Switching the VTR system between NTSC and PAL
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 1. Press the BND button % and select the desired TV band. (TV1 or TV2) 2. To recall a stored TV station, press the desired PRESET button # to select that station.
Switch to the VTR or DVD changer mode you use. 1. Press the ADJ button * to switch to the adjustment selection display. 2. Operate the JOYSTICK upward or downward to move the cursor to VTR N/P. 3. Operate the JOYSTICK rightward or leftward to move the cursor to select NTSC or PAL. 4. Press the ENT at the center of the JOYSTICK to set the selected VTR or DVD changer mode.
TV Operations Setting the TV area
Adjusting the brightness and tone of color
When you select the TV area (TV reception area), the TV tuner area setting changes. 1. Press the ADJ button * to switch to the adjustment selection display. 2. Operate the JOYSTICK upward or downward to move the cursor to TV AREA and press the ENT at the center of the JOYSTICK to display a list of country name. 3. Operate the JOYSTICK upward or downward to select a desired country. Then press the ENT at the center of the JOYSTICK to set it. 4. When the setting is finished, operate the JOYSTICK rightward or leftward to move the cursor MENU. Then press the ENT at the center of the JOYSTICK to return to the adjustment selection display.
Notes: This operation is available only when the car is stopped and the parking brake is applied. This function is not available when the display is stored. The HUE setting can be adjusted only when the NTSC mode is selected. 1. Press the BND button % to switch to the adjustment selection display.

Dynamic Label Function

A dynamic label (hereinafter referred to as DLS) is a text data associated with each DAB service. This set can display DLS up to 128 characters in a display.

DLS display mode

Press the TITLE button ( for 1 second or longer to place in the DLS display mode. To cancel the DLS mode and return to the previous display, press the TITLE button ( again. If there is a DLS data in the reception service, DLS text is displayed in the text displaying area. A mark appears at the head of a whole text sentence (page), and a RETURN mark is indicated at the end point.

DLS memory

Up to six DLS, currently being received, can be stored. By pressing the PRESET button # 1 to 6 for 2 seconds or longer, the DLS page currently being displayed is stored. Operating the JOYSTICK rightward or leftward moves a cursor to either P1 through P6, and pressing the ENT at the center of the JOYSTICK for 2 seconds stores it.

DLS Calling

To call the DLS stored in the DLS memory, press the PRESET button #. The DLS in the DLS memory is displayed by 16 characters (2 lines) at the intervals of 5 seconds (automatic calling). To display at shorter intervals, press the PRESET button # while waiting for successive DLS character string to be displayed, the following DLS character string is displayed (manual calling). With the DLS memory being called, move the cursor to UPDATE and press the ENT at the center of the JOYSTICK. The display is changed into the DLS display being received.
Volume setting of TA, emergency broadcast (ALARM), information and PTY
The volume for TA, ALARM, information and PTY interrupts can be set during TA, ALARM or PTY interrupts.
When the TA, ALARM, information or PTY interrupt ends, the volume returns to the level it had before the interrupt.

NAVI Operations

NAVI functions
When Clarion Navigation (hereinafter referred to as NAVI) is connected, the following functions are enabled: Showing the NAVI display; NAVI guidance sound interruption; Remote operation of navigation functions by the remote controller through the optic sensor.
While interrupting the NAVI audio signal, an audio sound level is decreased and the NAVI guidance sound output is mixed. NAVI guidance sound interruption is possible even when the panel is closed, however in this case, only the Audio Display is showed.

NAVI operation

Changeover between NAVI display and Audio/ Visual (hereinafter referred to as AV) displays. When the panel is open, the NVG/AV button ) has the same function as the NVG/AV button ) on the NAVI remote controller to set a screen mode and a NAVI interruption. Operate this button to change over between NAVI and AV displays.

When the NAVI Display/NAVI guidance sound interruption setting (NAVI operation) is turned to the NAVI/NAVI mode on this unit, the audio sound level is decreased.
Setting Clarion NAVI as external input equipment
Be sure to perform this setting after connecting Clarion NAVI.
The factory default setting is NAVI.
1. When the panel is open, press the ADJ button * to show the adjustment selection display. 2. Operate the JOYSTICK upward or downward to select INPUT. A menu bar is shown to the right to select the following items: G NAVI: Setting when Clarion NAVI (NAX9500E, NAX943DV) is connected; G CCD: Setting when Clarion CCD camera is connected to this unit; G RGB: Setting when a RGB image of other companys equipment is input; G COM: Setting when a composite image of other companys equipment is input.
These settings cannot be selected when the DVD changer is connected.
3. Operate the JOYSTICK rightward or leftward to select NAVI. Press ENT at the center of the JOYSTICK to set connection of Clarion NAVI.

CCD Camera

Monitoring the CCD camera
The CCD camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CCA188). Notes: This function is not available when the display is stored. When the TV tuner and CCD camera are to be connected to this unit, connect the CCD camera to the CCD input terminal on this unit. Refer to the subsection Sample System 3 in 9. SAMPLE SYSTEMS section.
Connecting other companys image equipment
RGB type or composite type images from other companys equipment can be displayed on this unit Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal.
Setting CCD as an external input equipment
Be sure to perform this setting after connecting the CCD.
1. When the panel is open, press the ADJ button * to show the adjustment selection display. 2. Operate the JOYSTICK upward or downward to select INPUT. A menu bar is shown to the right to select the following items: G NAVI: Setting when Clarion NAVI is connected; G CCD: Setting when Clarion CCD camera is connected to this unit; G RGB: Setting when a RGB image of other companys equipment is input; G COM: Setting when a composite image of other companys equipment is input. 3. Operate the JOYSTICK rightward or leftward to select CCD. Press the ENT at the center of the JOYSTICK to set connection of the CCD.
1. When the panel is open, press the ADJ button * to show the adjustment selection display. 2. Operate the JOYSTICK upward or downward to select INPUT. A menu bar is shown to the right to select the following items: G NAVI: Setting when Clarion NAVI is connected; G CCD: Setting when Clarion CCD camera is connected to this unit; G RGB: Setting when a RGB image of other companys equipment is input; G COM: Setting when a composite image of other companys equipment is input. 3. Operate the JOYSTICK rightward or leftward to select RGB or COM. G To connect an RGB equipment: If the image equipment to connect is RGB type, select RGB. Equipment capable to be connected should have positive polarity signal of 0.7 V p-p for RGB, and negative polarity signal of 0.3 V p-p for synchronous signal. G To connect a composite type equipment: If the image equipment to connect is a Composite type, select COM.

Check that the parking brake is applied. Adjust the brightness properly. The temperature inside the vehicle may be 0C or less. Set to an appropriate temperature (25C or so) and check it again. The display is made dark at night to prevent the glare (When the headlight of the vehicle is lit in the daytime, the display gets dark). Check that COL and HUE are adjusted properly.
Improper NTSC/PAL setting
Set the NTSC/PAL properly according to the VTR.

Problem

Measure A radio wave may not reach sufficiently due to obstruction of mountains or buildings. Check it again at a place where a radio wave can be received properly. It may be under the influence of radio wave reflected by mountains or buildings. Check it again after changing place or direction. It may be under the influence from automobiles, streetcar, power cable, neon sign, and so forth. Check it again after changing place. This is not a failure, but a phenomenon peculiar to a liquid crystal panel (The LCD panel is produced according to technology with very high precision. Note that, though there are effective pixels of 99.99% or more, pixel missing or normally lit pixels account for 0.01%).
When the TV tuner Bad receiving condition is connected, the image gets unclear. The TV tuner has a double or triple image. The TV tuner has spots or stripes in the image. There are red, green, and blue points in the display. Bad receiving condition

Presence of jamming

10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed. Take the measures described to eliminate the problem.
Error Display ERROR 2 ERROR 3 ERROR 6 ERROR 2 ERROR 3 ERROR 6 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. A CD inside the CD changer is not loaded. A CD inside the CD changer cannot be played due to scratches, etc. A CD inside the CD changer cannot be played because it is loaded upside-down. Measure This is a failure of CD decks mechanism and consult your store of purchase. Replace with a non-scratched, non-warped-disc. Eject the disc then reload it properly. This is a failure of CD changers mechanism and consult your store of purchase. Replace with a non-scratched, non-warpeddisc. Eject the disc then reload it properly.

If an error display other than the ones described above appears, press the RESET button. If the problem persists, turn off the power and consult your store of purchase. For the DVD changer, refer to the Owners Manual provided with the DVD changer.

CD CHANGER

11. SPECIFICATIONS

FM (UKW) Tuner

Frequency range: 87.5 MHz to 108 MHz (0.05 MHz steps)

General

Power source voltage: 14.4 V DC (10.8 to 15.6 V allowable) Ground: Negative Current consumption: 4.0 A (1 W) Auto Antenna Rated Current: 500 mA less Dimensions of the Main Unit: 178 mm Width 50 mm Height 157 mm Depth Weight of the Main Unit: 1.7 kg Dimensions of the Remote Control Unit: 44 mm Width 110 mm Height 27 mm Depth Weight of the Remote Control Unit: 30 g (including battery)

AM Tuner

Frequency range: MW: 531 kHz to 1602 kHz (9 kHz steps) LW: 153 kHz to 279 kHz (3 kHz steps)

Audio Amplifier

Rated power output: 17 W 4 (20 Hz to 20 kHz, 1%, 4 ) Maximum power output: 47 W 4 Speaker impedance: 4 (4 to 8 )
RGB input: Video: 0.7 +/- 0.2 Vp-p (input impedance 75 ) Synchronize: 0.3 V (+0.9 / -0.1) Vp-p (input impedance: 75 ) Video input: 1.0 +/- 0.2 Vp-p (input impedance 75 )

Output

Audio output: min.200mVrms

LCD Monitor

Screen Size: 6.5-inch wide type (146.7 mm Width 79.1 mm Height) Display method: Transmission type TN liquid crystal display Drive method: TFT (thin-film transistor) active matrix driving Pixels: 336,960 (1440 234)
Notes: Specifications comply with EIAJ Standards. Specifications and design are subject to change without notice for further immprovement.

I Contents

1. 2. 3. 4. 5. 6. 7. 8. 9.
Installation and Wire connection manual
BEFORE STARTING... 45 PACKAGE CONTENTS... 45 GENERAL CAUTIONS.. 46 CAUTIONS ON INSTALLATION... 46 INSTALLING THE MAIN UNIT.. 47 REMOVING THE MAIN UNIT.. 49 CAUTIONS ON WIRING... 49 WIRE CONNECTION... 50 SAMPLE SYSTEMS... 52

BEFORE STARTING

1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery terminal before starting. This is to prevent short circuits during installation. (Figure 1)

PACKAGE CONTENTS

Cord clamp Spacer Special screw Universal mounting bracket Remote control unit Battery (for remote control unit) Outer Escutcheon DCP Case
1 Main unit 2 Manuals Owners manual & Installation manual Warranty card 3 Power supply lead 4 Bag for accessories of the main unit (No. 1) Flat head screw (M5 8)..4 Sems hexagonal bolt (M5 8)..Bag for accessories of the main unit (No. 2) Hook plate..2

English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus
CONTROLS / COMMANDES / REGLER / CONTROLLI REGELAARS / CONTROLES / KONTROLLER / CONTROLOS

English

4. NOMENCLATURE

Names of Buttons

Note: Be sure to read this chapter referring to the front diagrams of chapter 3. CONTROLS on page 5 (unfold).

JOYSTICK Operation

Notes: Many settings/procedures have to be performed by using the JOYSTICK. Be sure to read this chapter in order to operate it properly. In the DVD changer mode, items for menu display, etc. can be selected by operating the JOYSTICK upward, downward, leftward or rightward.
Main unit / Unit principale / Hauptgert / Unit principale Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principale
With the Display closed / Avec l`afficheur ferm / Mit geschlossenem Display / Con display chiuso / Met het display gesloten / Con el visualisador cerrado / Med bildskrmen stngd / Com o cran fechado

With the display closed

With the display open
G Selecting an item in the menu Select an item displayed in the menu by operating the JOYSTICK upward or downward. G Setting an option for the selected item When the setting options for an item are listed on the right of the display, you can choose the desired option by operating the JOYSTICK leftward or rightward. Then, press the center of the JOYSTICK to set your choice. G When push NEXT is displayed next to the menu item 1. Press the ENT at the center of the JOYSTICK to select the item and show the setting display for this item. 2. Operate the JOYSTICK upward or downward to select the desired setting option, then press ENT at the center of the JOYSTICK to set your choice.

Owners manual

1 PWR (POWER) button FNC (Function) button 2 SEARCH button VOLUME button a button d button 3 PLAY/PAUSE button 4 Information Panel 5 PS (Preset scan)/AS (Auto store) button SCN (Scan) button 6 DCP RELEASE lever 7 AF (Alternative Frequencies) button RPT (Repeat) button 8 PTY (Program Type) button RDM (Random) button 9 Z-EHCR (Z-enhancer) button 0 INFO (Information) button TA (Traffic announcement) button ! OPEN button @ DISP (Display) button # PRESET buttons (1 to 6) DIRECT buttons (1 to 6) $ MUTE button % BND (Band) button
Color LCD display & A-M (Audio-Mode) button * ADJ (Adjust) button ( TITLE button ) NVG (Navigation)/AV button JOYSTICK Remote Control Infrared Sensor
With the Display open / Avec l`afficheur ouvert / Mit geffnetem Display / Con display aperto / Met het display geopend / Con el visualisador abierto Med bildskrmen ppen / Com o cran aberto