Names of Buttons
Note: Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 5 (unfold).

When the display open

[AM] button
Shows the AUDIO MODE menu for tone adjustment, etc. Press and hold this button for 1 second or longer to switch the loudness on or off (LOUD ON/OFF).
English Franais Deutsch Italiano Nederlands Espaol Svenska Portugus

English

Owners manual

[ADJ] button

Shows the ADJUST MODE menu to change the settings.
Main unit / Unit principale / Hauptgert / Unit principale Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principale With the Display closed / Avec l`afficheur ferm / Mit geschlossenem Display / Con display chiuso / Met het display gesloten / Con el visualisador cerrado / Med bildskrmen stngd / Com o cran fechado
q The following buttons are used with the navigation system connected.

When the display closed

[VOL] button [FUNC] button
Press this button to turn on the power. Press and hold this button for 1 second or longer to turn off the power. Press this button to switch the modes such as radio. Use this button to increase/decrease the volume.

[IN] button

Enlarges the map screen.

[SHORT] button

Use this button to call a menu for resetting or canceling of the destination, etc. depending on the situation.
[TILT] [OPEN] [DISP] [TA]

[OUT] button.

Reduces the map screen.
[RELEASE] [s] [Q] [SEARCH] [DIRECT] [BAND]

[TILT] button

Use this button to adjust the angle of the liquid crystal panel in 5 steps. Every time this button is pressed and held for about 2 seconds or longer, the liquid crystal panel moves forward/backward in 3 steps.

[ICON] button

Used to find place names or facility names hidden in the same map.

[VIEW] button

Use this button on the menu screen or map screen being scrolled to show the present position on the map.

[SENSOR] [FUNC]

[BAND] button
Press this button to switch the receiving bands for radio/DAB/TV mode, etc. Press and hold this button for 1 second or longer to switch the SEEK/ MANUAL tuning modes. Use this button to move to the first track on a disc in the CD mode. Use this button to switch to the next disc in the CD/MD/DVD changer mode.

[ROUTE] button

Use this button while in the route guidance mode to recalculate the route when a detour is made due to traffic jam.

[MENU] button

Use this button to show the main menu.

With the Display open / Avec l`afficheur ouvert / Mit geffnetem Display / Con display aperto Met het display geopend / Con el visualisador abierto / Med bildskrmen ppen / Com o cran aberto

[OPEN] button

Use this button to open/close the liquid crystal panel. Press and hold this button for about 2 seconds or longer so that the liquid crystal panel is positioned horizontally when the liquid crystal panel is open. Press the button again to return the panel to the original position. Even if the button is not pressed, the panel returns to the original position after about 10 seconds.

[NVG/AV] button

Use this button to switch between the navigation screen and audio/visual screen.

[RPT+] button

Use this button to call one of the frequently-used functions.

[DIRECT] button

Use this button to select a preset channel in the radio/DAB/TV mode. Use this button to select a disc in the CD/MD/ DVD changer mode.

[DISP] button

Use this button to switch the indications such as play status on the information panel when the liquid crystal panel is closed. Use this button to call the LCD background screen setup menu when the liquid crystal panel is open. Press and hold this button for 1 second or longer to turn off the monitor when the liquid crystal panel is open. Use this button to switch the display sizes while in the screen where the TV, VISUAL, or DVD video/DVD changer mode is suspended.

[SEARCH] button

Use this button to tune to a station in the radio/ DAB/TV mode. Use this button to select a track in the CD/DVD video mode and CD/MD/DVD changer mode.

[NVG/AV]

[A-M] ([OUT]) [ADJ] ([IN])

[Q] button

Use this button to eject a CD.

[s] button

Use this button to mute the sound. Press and hold this button for 1 second or longer to enter the play pause mode in the CD/DVD video mode and CD/MD changer mode. Press and hold the button for 1 second or longer again to resume playback.