05-AR 773 DVD_D.indd 24

19.10.2007 14:13:26 Uhr

Men-bersicht

Seite Allgemeine Einstellung TV-Monitor Norm/PS Norm/LB Breit Ein Aus Englisch Franzsisch Deutsch Spanisch Italien. Portug. SPDIF Off SPDIF/RAW SPDIF/PCM Ein Aus Ein Aus Ein Aus Seite Bevorzugte Einst. TV Modell PAL Auto NTSC Englisch Franzsisch Spanisch Deutsch Italienisch Portugiesisch Englisch Franzsisch Spanisch Deutsch Itanienisch Portugiesisch Aus Englisch Franzsisch Spanisch Deutsch Italienisch Portugiesisch Kind.Sicher 2G 3 PG 4 PGPGR 6R 7 NC-17 Erwachsener Aus ndern Reset
Winkelzeichen OSD-Sprache

Diskettenmen

Untertitel

SPDIF-Ausgabe

Untertitel Scr Saver Letzter Speicher

Diskette Men

Lautsprechereinstellseite Abwrtsmischung

LT/RT Stereo

Sperrfunktion
Dolby Digital Einstellung Dynamisch

Kennwort Grundeinst.

05-AR 773 DVD_D.indd 25
Figure 1: Remote Control 1 II PLAY/PAUSE: a) Radio Mode: PTY selection of the program type. b) CD/MP3/DVD mode: Starting playback, stopping picture/track. 2 STOP: Stop play. 3 ANGLE/ : To select the viewing angle. 4 MO/ST/ : a) Radio Mode: Stereo/Mono switching. b) CD/DVD Mode: To change the Audio settings (depending on the DVD). 5 EQ/LOUD: Radio Mode: - Press briey: Selecting equaliser settings. - Press longer: Switching the LOUDNESS function on and off. 6 CLK: - Press briey: Showing/hiding the time. - Press longer: Setting the time. 7 I: To jump to the next chapter or song. 8 ENTER: Conrming the input. 9 Cursor buttons: a) Radio Mode: - Press briey: Manual station search. - Press longer: Automatic station search. b) MP3/DVD mode: Navigation in screen menu / For selecting the folders or MP3 tacks. 10 I: To return to the previous chapter or song. 11 Numerical buttons: a) Radio Mode: - Press briey (0-6): Station selection. - Press longer (0-6): Station storage. b) CD/MP3/DVD mode: For direct selection of chapter or song number. c) Bluetooth Mode: Entering the Telephone Number. 12 9/AF: Press longer: Switching on and off an alternative frequency. 0/TA: Press longer: Turning pre-switching for trafc announcements on and off. 13 +10: for selecting the chapters/tracks above 9. Pressing again increases by a further 10. 14 GOTO: For direct accessing of a section on the CD/DVD. 15 SETUP: To start the setup menu.
16 SEL: Radio Mode: - Press briey: Select sound/picture mode. - Press longer: REG, PI, AF function selection. 17 VOL +/-: To increase/reduce the volume. 18 A/PS: Radio Mode: - Press briey: Scan function of the stored radio stations. - Press longer: Automatic station storage. TITLE/PBC: a) To show the title menu of the DVD (depending on the DVD). b) To show the Playback-Control for VCD. 19 : Fast reverse. 20 BAND/OSD: a) Radio Mode: Switching the 3 FM and 2 MW levels. b) CD/MP3/DVD mode: Alternating the time displays. 21 LO/DX/ : a) Radio Mode: LOCAL/DX function. b) DVD Mode: To show/hide subtitles (depending on the DVD). 22 : Fast forward. 23 MENU/ : - Press briey: To display the main menu of the DVD/VCD. - Press longer: Switching the subwoofer on and off. 24 PAIR/ : Bluetooth Mode: - Press briey: Re-establishing a connection and dialling a telephone number that you have entered. - Press longer: Registering devices with one another and calling up the Bluetooth menu. 25 REDAIL/ : Bluetooth Mode: - Press briey: Rejecting a Call. - Press longer: Redialling. 26 : Changing the viewing angle of the operating unit. 27 /MODE: - Press briey: Operating mode selection (CD/DVD, AUX IN, Radio etc.). - Press longer: To activate standby mode. MUTE: To switch of the sound.

Figure 2: Control Panel - see Operation.
05-AR 773 DVD_GB.indd Abs1:26

19.10.2007 14:14:39 Uhr

Road Safety Safety Information
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions. Use the device only for the intended purpose. The device should be installed in such a way that existing ventilation holes are not covered. Never open the housing of the device. Incorrect repairs can constitute a considerable risk for the user. If the device is damaged it should not be used, but repaired by a specialist. Road safety is of paramount importance. You should therefore use your car radio at all times in such a way that you are able to cope with the current trafc situation. Please remember that at a speed of 30 mph (50 kph) you travel 15 yards (14 metres) in one second. We advise you not to operate the radio in critical situations. It must be possible to hear the sirens of police and re brigade vehicles etc. from inside the vehicle in good time. When driving you should therefore not turn the radio volume up excessively. For safety reasons a lock connected to the handbrake of the vehicle prevents certain functions of the device from operating when the vehicle is moving. In order to be able to use these functions please stop in a safe place and put on the handbrake. Please note that it is not permitted to operate the DVD player when the vehicle is moving or if the engine is running! In order to prevent road accidents you should install the device in such a way that it does not cause an obstruction when you turn the steering wheel or move the gear lever etc. Similarly, safety equipment such as airbags and the drivers view of the road must not be obstructed. Under no circumstances should any additional monitor that is connected be installed in such a way that it can be seen by the driver when the vehicle is moving!
These symbols may be found on the machine and are intended to indicate the following: The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a class 1 laser for tracing the CD/DVD. The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. Children and Frail Individuals In order to ensure your childrens safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach. Caution! Do not allow small children to play with the foil as there is a danger of suffocation! Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine: WARNING: This warns you of dangers to your health and indicates possible injury risks. CAUTION: This refers to possible hazards to the machine or other objects.

When installing and connecting the radio please note the following safety information.
First disconnect the minus pole and then the plus pole of the battery. (connection in the reverse order.) Please note: Once the battery has been disconnected the information is lost from all volatile memory. Please note the safety information provided by the vehicle manufacturer. The main fuse must be installed as closely as possible (not more than 30 cm away) to the plus pole of the battery so that the car is protected from any cable re caused, for example, by an accident. If the above is not complied with the insurance protection no longer applies. The cross-section of the plus and minus cable must not exceed 1.5 mm. When drilling holes please ensure that none of the vehicle components are damaged.
Installation Tips: Cable protection sleeves protect cables against fraying on sharp body parts. The insulation of the cables must not be damaged during installation. It is essential to use the correct tools when installing car hi-.
NOTE: This highlights tips and information.
Depending on the model, your vehicle may deviate from the above description. We do not accept any liability for damage caused by installation or connection errors or for consequential damage.
05-AR 773 DVD_GB.indd Abs1:27

19.10.2007 14:14:40 Uhr

Installation
Please install the car radio as shown below.
Nut Spring washer Plain washer Screw Mounting bracket Slide-in housing Threaded bolt
NOTE: Coution! Retaining screws during transport (please remove before installation) Extraction tool (spanner for dismantling) Screen cover Fan
CAUTION: Do not cover the fan!
USA/EURO switch (radio frequency switch for selecting between the USA and EUROPE frequency band)
First place the operating panel in position on the righthand side and then lock it into place on the left.
05-AR 773 DVD_GB.indd Abs1:28

Connection

Connect the device as shown in the diagram.

ISO connection

Yellow Antenna connection Fuse Ignition (B+) Red AUX (optional) RCA cable RCA cable / output rear (optional) Fuse/ lter box RCA cable / output front
Camera input rear Video input rear Audio input R (red) Audio input L (white) Subwoofer (grey) Video output 2 (yellow) Coaxial output (brown) R red

05-AR 773 DVD_GB.indd Abs1:31
b) In CD/DVD, USB mode: If you wish to jump forwards or backwards press the SEL button briey in the or direction. To wind through the tracks keep the SEL button pressed in the or direction for approximately 2 seconds. X2 appears in the display. Operating the SEL button again in the or direction for approximately 2 seconds increases the winding speed. Speeds of X2, X4, X8 and X16 are available. Press the II/CH 1-6 button (13) to return to normal playback.
then appears briey in the display. When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found. If the programme type being searched for is not found, NO PTY appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode. 10. Button Press this button to insert and eject the CD/DVD. The operating unit swings downwards. Insert the CD/DVD with the labelled side facing upwards gently into the CD slot until the device draws in the CD/DVD automatically. The operating unit automatically swings back to the normal position. WARNING: Do not place your ngers behind the operating unit. There is a danger of injury when the operating unit returns to the normal position.
7. IR (Infrared) Sensor for the remote control 8. TA / AF Button a) TA Trafc Annonuncement (Priority for Trafc Information) The TA function is activated by pressing the TA/AF button briey. The TA symbol appears in the display. During radio operation in one FM frequency band the search for a trafc announcement station is started automatically (TA SEEK). If an FM station is being received which transmits the latest trafc announcements from time to time, the TP display lights up. When the TA function is switched on, the FM trafc announcements automatically interrupt CD operation (The word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of trafc announcements. After the trafc announcement has nished, the programme that was previously running is resumed. Interruption of the TA Function: If you would like to interrupt the current trafc announcement, press the TA/AF button briey. This does switch off the TA mode. b) AF (Alternative Frequencies) See point 14. 9. MU/PTY Button (Mute) a) Press the MU/PTY button to switch off the loudspeakers for a short period. The word MUTE ashes in the display. Press this button again to cancel the mute function. This function can also be cancelled by pressing the VOL multifunction button. b) Radio Operation: PTY Selection of the Programme Type Besides the station name, some FM stations also transmit information on the type of programme. This information can be displayed by your car radio. Examples of such types of programme are: SPORT NEWS POP CLASSICS With the PTY function you can specically select stations transmitting a particular type of programme. Keep the MU/PTY button pressed down for approx. 2 seconds to access the PTY menu. The message PTY SEEK

area) in order to re-establish the connection (BLUETOOTH CONNECTING appears in the TFT display).
NOTE: Press this button during a call in order to transfer it back to your mobile telephone. If you press the button again the call is transferred back to the car radio.
Setting the Time 6. CLK Button (Time) (on the remote control) a) Press the CLK button in order to bring up or hide the clock. b) To set the time keep the CLK button pressed down for approx. 3 seconds. The hours ash in the display. Carry out the settings with the help of the VOL multifunction button (3). Press the CLK button again. The minutes now ash. Carry out the settings with the help of the VOL multifunction button (3). Press the CLK button again to store.
NOTE: If RDS data is received the time is set automatically.
Using the Number Buttons Numerical buttons (11 on the remote control) as Station buttons (16) of preselected stations and as 1TOP-, 3 INT-, 4 RDM buttons during CD operation a) Radio Operation Pressing these buttons briey directly selects a preset radio station. If these buttons are pressed for more than one second, the station currently being listened to is stored under the selected station button. b) CD Operation Pressing briey directly selects the corresponding CD/MP3 track. Keep the corresponding button (1TOP, 3INT, 4RDM) pressed for approximately 3 seconds in order to switch the following functions on and off: Press the 1TOP button to jump to the rst track of the CD/MP3.
Adjust the volume of the external device to an appropriate level.
Button (Operating unit angle) You can change the viewing angle of the operating unit. Press the button up to four times in order to select the desired position. WARNING: Do not place your ngers behind the operating unit. There is a danger of injury if the operating unit returns to the normal position.
NOTE: No function during DVD operation.
Press the 2RPT button. The track currently being played is repeated. Press this button again to cancel this function. In the case of DVDs you can repeat the chapter, title or the entire DVD. Press the 3INT button. Each track on the CD is played for 6 seconds. Press this button again to stop searching. The currently selected track is played. During DVD operation a menu appears. Here you can use the , , , buttons (9 on the remote control) of the remote control to choose between 4 options. Conrm your selection with the ENTER button (8 on the remote control).
20. PAIR/ In Bluetooth mode: Press this button to accept an incoming telephone call. Keep the button pressed down to call up the Bluetooth menu. Keep the button pressed down to make the connection between the devices (BLUETOOTH PAIRING appears in the TFT display). Press the button briey after the connection between the devices has been interrupted (e.g. after leaving the reception

NOTE: No function during MP3 operation.
05-AR 773 DVD_GB.indd Abs1:34

19.10.2007 14:14:44 Uhr

Press the 4RDM button. The DVD, MP3/CD tracks are played at random. Press this button again to cancel this function. Button (21 on the remote control)

Radio Mode

Reception of this station data is shown in the display by the EON symbol. You can choose between the LOC(AL) and DX (DISTANCE) mode for local or long-distance trafc news. LOC(AL): This function prevents switching to an EON station whose signal is too weak. The radio does not switch to this station and the listener does not hear any interference. DX (DISTANCE) Mode: In this mode the EONTA circuitry tries to receive the EONTA information from any available transmitter and thus improve reception quality. DVD Operation: Press the button several times if you would like to activate or deactivate the subtitle function or if you want to choose a different subtitle language. The available subtitle languages depend on the DVD.
To switch of the sound. Operating mode selection (CD/DVD, AUX IN, Radio etc.). Next Menu. Switching the 3 FM and 2 MW levels. Press briey: Station selection. Press longer: Station storage. 6 Press briey: Setting the Radio Frequency. Press longer: Station Search for the Next Station.

Using the Touch Screen

In addition to operating the device by the buttons, the device itself and with the remote control, it is also possible to use the touch screen. Touch the TFT screen of the device lightly with one of your ngers. The respective main menu of the individual modes is displayed. Touch the buttons shown lightly in order to perform the functions. A brief overview is to be found in the following section: 5 To increase/reduce the volume. LOCAL/DX function. Next Menu. Redialling. Press briey: Selecting the Sound Mode. Press longer: REG, PI, AF function selection. 6 Calling up the Bluetooth Menu. 7 Previous Menu.
If no selection is made within approximately 10 seconds the touch screen menu disappears again.
05-AR 773 DVD_GB.indd Abs1:35
LOCAL/DX (EON) (only available during radio operation) Your radio can receive RDS EON data. The term EON signies the transmission of additional station information within a station chain, e.g. WDR. If a trafc announcement (TA) is made within a station chain, the radio switches from a station which does not transmit trafc announcements to one that does within the same station chain.
1 Press briey: Showing/hiding the time. Press longer: Setting the time. 2 PTY selection of the program type. 3 Press briey: Scan function of the stored radio stations. Press longer: Automatic station storage. 4 Registering Devices with One Another. 5 Stereo/Mono switching. 6 Switching on and off an alternative frequency. 7 Turning pre-switching for trafc announcements on and off. 8 Previous Menu. 9 Switching the subwoofer on and off. 10 Switching the LOUDNESS function on and off. 11 Selecting equaliser settings. AUX IN Mode

Switching the LOUDNESS function on and off. Selecting equaliser settings. Loading and Ejecting the CD/DVD. Registering Devices with One Another. Press briey: Showing/hiding the time. Press longer: Setting the time. Changing the viewing angle of the operating unit. Previous Menu. Turning pre-switching for trafc announcements on and off. Switching on and off an alternative frequency. Switching the subwoofer on and off.
BT MUSIC Mode (A2DP) In this mode it is possible to play back the music from a device that is Bluetooth-compatible and operate the connected device.
HINWEIS: In order to be able to use this mode the connected device must support the A2DP prole.
A2DP (Advanced Audio Distribution Prole) A Bluetooth prole that is required in order to transfer stereo music and audio les between playback devices and receiving devices without wires.
To switch of the sound. Operating mode selection (CD/DVD, AUX IN, Radio etc.). Next Menu. To increase/reduce the volume. Press briey: Selecting the Sound Mode. Press longer: REG, PI, AF function selection. 6 Calling up the Bluetooth Menu. 7 Redialling. Stop play. To switch of the sound. Operating mode selection (CD/DVD, AUX IN, Radio etc.). Next Menu. To increase/reduce the volume. Press briey: Selecting the Sound Mode. Press longer: REG, PI, AF function selection. 7 Jump to the previous song. 8 Jump to the next song. 9 Start playback, stop the song.
05-AR 773 DVD_GB.indd Abs1:36

19.10.2007 14:14:45 Uhr

Switching the LOUDNESS function on and off. Selecting equaliser settings. Registering Devices with One Another. Switching the subwoofer on and off. Switching on and off an alternative frequency. Turning pre-switching for trafc announcements on and off. Previous Menu. Calling up the Bluetooth Menu. Redialling.
Redialling. Loading and Ejecting the CD/DVD. Next Menu. Registering Devices with One Another. Zoom in and out. Previous Menu. Changing the viewing angle of the operating unit. Calling up the Bluetooth Menu.

CD/DVD Mode

Stop play. To switch of the sound. Operating mode selection (CD/DVD, AUX IN, Radio etc.). Next Menu. To increase/reduce the volume. Press briey: Selecting the Sound Mode. Press longer: REG, PI, AF function selection. 7 Jump to the previous chapter. 8 Jump to the next chapter. 9 Start playback, stop the picture.
1 Switching the LOUDNESS function on and off. 2 Selecting equaliser settings. 3 Press briey: Showing/hiding the time. Press longer: Setting the time. 4 Next Menu. 5 Alternating the time displays. 6 Repeat title, chapter etc. 7 Scan function. 8 Random playback. 9 Previous Menu. 10 Turning pre-switching for trafc announcements on and off. 11 Switching on and off an alternative frequency. 12 Switching the subwoofer on and off.

Selecting the telephone number entered. Hold down to enter the hash. Hold down to enter the asterisk. Hold down to delete a telephone number that you have entered incorrectly. 5 For entering the telephone number. 6 Previous Menu.
05-AR 773 DVD_GB.indd Abs1:38

19.10.2007 14:14:46 Uhr

If registration was not successful, appears in the display of the car radio. Depending on the mobile telephone manufacturer, it is necessary to carry out the registration (PAIRING) again in order to register your mobile telephone in the car radio. Bluetooth compatibility cannot be guaranteed for mobile telephones that come onto the market in the future. In order to guarantee an optimum connection, please ensure that the battery of your mobile telephone is fully charged. Some makes of mobile telephone have an energy-saving mode. Please deactivate the energy-saving mode, as you may otherwise have problems when telephoning via Bluetooth. In order to be able to conduct an incoming or outgoing telephone call Bluetooth has to remain activated in your mobile telephone. Please consult the operating instructions for your mobile telephone. Please ensure that you speak in the direction of the built-in microphone. The connection of an external microphone is not possible.
NOTE: If you would like to redial the last number you can also press the button on the touch screen.
To end the call press either the button on the touch screen, the REDIAL/ button (25) on the remote control or the BAND/ button (1) on the device. Incoming Calls In the case of incoming calls a ringing tone is heard from the loudspeakers, and if the caller has a CLIP Calling Line Identication Presentation-capable telephone, the callers number appears in the display of the car radio. Otherwise CALL INCOMING appears in the display. 1. To accept an incoming call, press the PAIR/ button (20) to conrm. You will now hear the caller through the loudspeakers of your car. 2. To terminate the call please press the BAND/ button (1).
Outgoing Calls button (20/24) held down to call up 1. Keep the PAIR/ the Bluetooth menu. 2. In order to enter the desired telephone number please use either the touch screen or the number buttons on the remote control.
You can transfer the call back to your mobile telephone. In order to do so, keep the PAIR/ button (20) pressed. If this button is held down again, the call is transferred back to the car radio. In order to reject an incoming call press the BAND/ button (1).

Many of these default settings can be changed via both the remote control and the menu. The difference is: If you change the default settings via the remote control, these changes will only be valid until the DVD-Player is switched off or the DVD is changed. However, any changes made in the menu are permanent.
NOTE: Some of the menu settings can only be selected in stop mode (depending on the DVD).

General Settings

TV Display
Understanding the menu structure
The Setup menu has two menu levels: Main menu: The main level is represented by graphical symbols. Sub-menu: The corresponding sub-menu options can be found under each of the main menu options.
Here you can adapt the output of the DVD-Player to the TV-aspect. Concerning the background: If you do not have a wide screen TV the TV-aspect will be 4:3. However, most feature lms have an aspect of 16:9, the image is therefore too wide for the TV-screen. Here you can specify how the replay of the lm is to be adapted to the replay device: Norm/PS: You will only see the middle section of the lm. The borders will be cut off (Pan-Scan). Norm/LB: You will see the complete width of the lm. The lm is thus reduced in size, whereby black bars appear below and above the lm (Letter-Box). Wide: Select this option if you use a wide screen TV for replay. Please note that lms, that have been recorded with TV-aspect 4:3 can still be replayed using aspect 4:3. This means, that replaying this lm will not require the complete wide screen area of the television.

Using the menu

Navigation and selection
Use the Cursor Buttons (Fig. 1/9) (, ) on the remote control to browse through the main menu. In contrast to this, you must use the Cursor Buttons (, ) to move in the sub-menu. Select a menu option with the ENTER-button (Fig. 1/8). Use the ENTER-button also to select an option (e.g. PAL in the illustration on the top). The selected option (in the example NTSC) is now highlighted.

Slide control

NOTE: The setting Norm/PS is not supported by all DVDs.
Angle Mark (Camera Angle)
In some menus you will nd slide controls. The slide control is used as follows: 1. Select with the ENTER-button. 2. Move the control with the Cursor Buttons (, ). 3. Conrm the entry with the ENTER-button. If the DVD contains sequences recorded from different camera angles you can use the ANGLE button (Fig. 1/3) to select the various camera angles. This function is only available if the DVD contains scenes with various camera angles.
05-AR 773 DVD_GB.indd Abs1:40

19.10.2007 14:14:48 Uhr

Before you can use this function it has to be activated. On: The angle symbol is shown on the screen. Off: No angle symbol is shown on the screen.

Screen saver

OSD language
The player is able to display a still image for any time on the screen. This can cause damage to the screen. It is therefore recommended to activate the screen saver. Here you can select the language of the on-screen displays. Audio output On: The screen saver is activated (default setting). Off: The screen saver is deactivated.

Last Memory

Here you specify the settings for the digital Audio output. SPDIF OFF: Output of an analogue Audio signal, but no digital signal. SPDIF/RAW: Output of a digital Audio signal. Use this setting if your amplier is notwo-channel stereo amplier. SPDIF/PCM: Output of a digital Audio signal that is converted to a 2-channel signal. Use this setting if your amplier is a two-channel stereo amplier. Here you can dene how the DVD player should behave if the user presses the STOP button (Fig. 1/2) during playback. On: If the playback of a DVD, CD or VCD is stopped and then restarted, playback begins from the previous position. Off: If the playback of a DVD, CD or VCD is stopped and then restarted, playback begins from the beginning of the medium.

Speaker setup

Downmix
If there is no Audio output, even though you connected the DVD-Player to an amplier, you will most likely have chosen an incorrect setting for the Audio output.

Captions

Change the characteristics of the speaker output: Some DVDs contain commentaries that accompany the lm, e.g. subtitles for the hard of hearing. On: The commentary is displayed. Off: No commentaries are displayed. LT/RT: Choose this setting if you want to play the DVD with the Pro Logic Dolby stereo effect. This produces a almost real 2-channel replay effect. Stereo: Choose this setting if you want to play a DVD, that has been produced in the 5.1-Audio format, as 2-channel stereo sound.
05-AR 773 DVD_GB.indd Abs1:41

19.10.2007 14:14:49 Uhr

The following options are available:

Digital setup

Dynamic Range

Subtitle language

The term Dynamic Range describes the ratio of quietest and loudest sound. If the dynamic range is very large, you will experience very quiet and very loud sounds. This may cause replay problems. Let us assume that you are watching a DVD in a relatively loud environment. You can now increase the volume to be able to hear also the very quiet passages, however with the disadvantage that loud passages will be unacceptably loud. In this case it would make sense to compress the dynamic range (i.e. reduce) and increase the output volume at the same time. FULL -2/8: The dynamic range is compressed slightly (2/8) to full (FULL). OFF: The dynamic range is not compressed at all (default).

Here you can select the preferred language for the subtitles accompanying the lm. Menu language
Here you can select the preferred language for the DVD menus. Parental (Child protection)

TV Type

Some DVD contain information concerning the target group. This method is comparable with the rating of cinema lms (Suitable only for persons of 12 years and over e.g.). Match the output of the DVD-Player to the colour transfer system of your replay device. The following options are available: PAL: A system commonly used in Europe. AUTO: Select this setting if your replay device is a multisystem unit. NTSC: A system primarily used in North America. If you have the child protection option activated a probably existing corresponding information is read from the DVD and compared with the value pre-set by you. If a DVD is intended for an older age group than the one pre-set by you, the DVD cannot be played. The following child protection options are available: Kid Saf: Suitable for children. G: Suitable for all age groups. PG: The presence of parents is recommended. Some scenes may be unsuitable for children. PG 13: The presence of parents is strictly recommended. Some scenes may be unsuitable for children under the age of 13. PGR: The presence of parents is strictly necessary. R: Young persons under the age of 17 may only view this lm in the presence of an adult. NC17: Children and juveniles under the age of 17 are not allowed to watch this lm. Adults: The lm must only be watched by adults. Off: The child lock is deactivated.

Audio language

Here you can select the preferred language for the audio output.
05-AR 773 DVD_GB.indd Abs1:42

19.10.2007 14:14:50 Uhr

Password General

Technical data

Supply voltage..DC 13,8 V Power consumption..10 A max. Power... 4 x 60 W PMPO Monitor...4,3 / 10,9 cm TFT Number of pixels.. 480 x 3 (RGB) x 272
In order to change the password, you must rst enter the current password. The master password is 1379.
Frequency range.87,5 MHz to 108,0 MHz Effective sensitivity..15 dB. I.F. frequency...10,7 MHz AM band Frequency range..522 kHz to 1620 kHz Effective sensitivity..40 dB I.F. frequency...450 kHz (Line-Out) Output... 2 CH & 4 CH Signal format...PAL/NTSC Video output..1,0 V (P-P) 75 Ohm CD player System.. MP3 Audio System Suitable CDs.. CD/CD-R/CD-RW/MP3/DVD/VCD Disks (12 cm discs) Playable bit rates..32 - 320 kBit/s Number of quantising bits... 1 bit. Frequency characteristics.. 20 Hz 20 kHz Signal-to-noise ratio..90 dB (JIS) Number of channels..2 stereo channels Housing dimensions.. 178 W x 50 H x 165 D Regionalcode.2 (= Europe, Greenland, South Africa, Egypt and Middle East, Japan) Bluetooth Standard.. V1.2 (Class II) Frequency band.. 2.4 GHz spectrum Range..approx. 3 metres (unobstructed)

Always hold CDs by the edge. In order to keep the CD clean do not touch the surface. CAUTION: Do not attach any stickers or adhesive tape to the CD. Do not expose the CD to direct sunlight or sources of heat such as heating pipes. Do not leave CDs in the car if it is parked in direct sunlight as this will lead to a considerable rise in the temperature inside the car. Check all CDs for cracks, scratches and warping before you play them. It is possible that CDs that are damaged in this way cannot be played back correctly. Such CDs should not be used. Use only standard commercially available circular CDs with a 12 cm diameter! CDs with an 8 cm diameter or CDs with contours, e.g. of a buttery or heart, are not suitable. It is possible that such CDs may not only be destroyed themselves, but may also destroy the drive of the CD player. We cannot accept liability for damage caused by the use of unsuitable CDs.
05-AR 773 DVD_GB.indd Abs1:45
Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.
A AF....32 APS button...33 AUX IN....34 B BAND button...31 Bluetooth...38 Buttons on the Remote Control..3 C Changing the Angle of the Control Panel..34 CLK button...34 Connection...29 D DISP button...33 DVD Player...39 E Ejecting the CD...32 G Guarantee....45 H Handling a CD...45 I Important Additional Installation Information..30 Installation....28 Installation (Safety Information)..30 Installation Tips...27 INTRO (3INT)....34 L LO/DX button...35 M MOD button...33 MU button (Mute)...32 O Operating instructions...30 Operation...31 P PAIR button...34 PI (Programme Information)..33 Play / Pause (II)...33 PTY button...32 PWR button...33 R RANDOM (4RDM)...34 REG (Regional)...33 REL button...31 Remote control battery installation..30 REPEAT (2RPT) (Repeat)..34 RESET button...31 Road Safety...27 S SEL button....32 Safety Information...27 Switching off...33 Switching on...33 Switching to Mono..3 Switching to Stereo...3 Mute (see MU button)...32 T TA (Trafc Announcements)..32 Technical Data...43 Telephoning...38 Time (see CLK)...34 Touch Screen....35 Trafc Announcements (see TA)..32 Troubleshooting...44 U USB Connection...34
05-AR 773 DVD_GB.indd Abs1:46

19.10.2007 14:14:53 Uhr

Menu overview
General Setup Page TV Display Norm/PS Norm/LB Wide On Off English French German Spanish Italian Portuguese SPDIF Off SPDIF/RAW SPDIF/PCM On Off On Off On Off Preference Page TV Type PAL Auto NTSC English French Spanish German Italian Portuguese English French Spanish German Italian Portuguese Off English French Spanish German Italian Portuguese KID SAV 2G 3 PG 4 PGPGR 6R 7 NC-ADULT Off Change Reset