Quick Start Guide

ENGLISH

FRANAIS

DEUTSCH

ESPAOL

ITALIANO

DUTCH

www.concord-camera.com
3042 QS Guide(513441-00).qxd

2003:09:23

4:58 PM

Page 2

LANGUAGES
ENGLISH....1 FRANAIS...7 DEUTSCH...13 ESPAOL...19 ITALIANO...25 NEDERLANDS....31

Page 1

QUICK START GUIDE

ENGLISH

This Quick Start Guide provides a quick reference for operating your new digital camera. Refer to the Users Guide, which can be found on the CD-ROM and a hard copy in your Concord Eye-Q 3042AF box, for detailed instructions on how to use all of your cameras features. Before using the camera, make sure to read all safety instructions and precautions outlined in the Users Guide.

CAMERA OVERVIEW

Top/Front
1. Power Button 2. Shutter Button 3. Flash 4. Lens 5. Viewfinder 6. Flash Sensor
7. Red-eye Reduction LED/Self-Timer LED 8. Mini-USB port 9. Video/TV-Out port 10. Macro Mode Switch

Bottom/Back

11. Flash Ready LED 12. Viewfinder 13. Auto-Focus LED 14. LCD 15. Tripod Socket 16. Battery/Memory Card Door 17. Mode Switch 18. Navigation Arrow buttons/Zoom buttons/Flash button
19. OK button/ Enlargement button 20. Reset Button 21. MENU Button 22. Wrist Strap Holder 23. LCD On/Off Button 24. Memory Card Slot 25. Battery Compartment

003/016

AWB AWB

LCD ICONS

A B C D E

003/016 G

A. Resolution B. Camera Mode C. Flash D. White Balance E. Battery Level F. Image Quality
G. Macro H. Frame Counter I. Self-Timer J. Zoom Bar K. Memory Card

H I J K

003/016 AWB
: Single Shot : Review : Video Clips
Attaching the Wrist Strap Please attach the wrist strap to prevent dropping the camera.

LOADING THE BATTERIES

fig.1.1

fig.1.2

fig.1.3AWB
The camera can use 2x AA alkaline, lithium or NiMH rechargeable batteries. 1. Open the Battery/Memory Card door. (fig.1.1) Slide the door in the direction of the arrow, and lift it open. 2. Insert the batteries according to the polarity indicators on the top edge of the battery compartment. (fig.1.2) 3. Shut the Battery/Memory Card door by sliding it in the opposite direction of the arrow marked on it, and close it securely. (fig.1.3)

Page 3

GETTING STARTED
TURNING THE CAMERA ON AND OFF
The Power Button is located on the top of the camera. (fig.1.1) 1. Press the ( ) Power Button to power the camera on. The LCD will turn on automatically 2. To turn the camera off, press the ( ) Power Button.
Note: To extend battery life, the LCD will be off after 1 minute of inactivity, press ( ) button to reactivate the LCD. The camera will automatically power off after 2 minutes of inactivity, press the Shutter Button to power the camera back on.

SETTING THE LANGUAGE

When the camera is powered on for the first time, the Language menu will appear. Setting the Language 1. Turn the camera on. The Language Setup screen will appear on the LCD. 2. Press to highlight the language you would like to use. 3. Press the OK button to select. 4. The next screen will read Are You Sure? press to select No or Yes. 5. Press the OK button to confirm the selection. If you select No, you will return to the Language select screen. If you select Yes, all menu screens will be displayed in the new language.

LANGUAGE OPTION

English Franais Deutsch Italiano Espaol RETURN

OK SET

A Nederlands

RETURN

Page 4
INTERNAL MEMORY/INSERTING THE MEMORY CARD
The camera has 7MB internal memory that can be used right away. The camera can also use secure digital (SD) memory cards (not included) to store images and video clips.

fig.1.3

1. Open the Battery/Memory Card door. Slide the door in the direction of the arrow marked on it, and lift it open. (fig.1.1) 2. Insert the memory card as indicated by the diagram. (fig.1.2) Please insert the card in straight, not on an angle. 3. Shut the Battery/Memory Card door by sliding it in the opposite direction of the arrow marked on it, and close it securely. (fig.1.3)
To eject the card, push the card in and release, then pull it out.

TAKING A PICTURE

TAKING A PICTURE WITH THE VIEWFINDER OR LCD
1. Turn the camera on. 2. Set the camera to ( ) Camera Mode and make sure the Macro Mode Switch is set to the ( ) Distant Mode located on the front of the camera. (fig.1.1) 3. Frame the subject in the viewfinder or LCD. 4. Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (fig.1.2) 5. Press the shutter button fully to capture the image. (fig.1.3)

Page 5

GETTING STARTED / TICKING PICTURES

SETTING THE FLASH

28 SEC

1. Press

repeatedly until the desired indicator appears on the LCD.

TAKING A VIDEO CLIP

Press Shutter to Record

To 1. 2. 3. 4.

record a video clip: Slide the Mode Switch to ( ) Video Clip Mode. Position the subject in the viewfinder or LCD. Press the shutter button fully to capture a continuous video clip. To stop recording, press the shutter button again.
Note: There is a time limit for each video clip. The time will vary depending on the amount of available memory space. The alloted amount of recording time will appear on the top right hand corner of the screen. The video clip capture will stop automatically when it reaches its time limit.
Video Clip Information Resoluton: 512 x 384 Frame rate: 10fps File Format: AVI (Motion Picture)
Note: The Flash Ready LED will turn red when the camera is storing the video clip. Do not open the battery door or turn the camera off while recording, or the video clip may not be stored.

Page 6

TICKING PICTURES

DELETE ONE FILE

REVIEW
DELETE FILES THUMBNAIL SETUP

DELETE FILES

DELETE ONE DELETE ALL

SELECT

DELETE OK

1. 2. 3. 4.

Slide the Mode Switch towards ( ). When Delete File is highlighted, press to enter the Delete File submenu. Are You Sure? In the Delete File menu, press when Delete One is highlighted. The next screen will display the stored pictures and video clips as thumbnails. No Press , , , to highlight the file you want to delete. Yes 5. Press the OK button to select. OK SELECT 6. The next screen will read "Are You Sure?" press or to highlight No or Yes. 7. Press the OK button to select. If No is selected, no change will be made, and you will return to the Delete One thumbnail view. 28 SEC SEC SEC 003/016 003/016 003/016 003/016 A 003/016003/016 A A If Yes is selected, the selected file will be deleted.

28 SEC SEC SEC

DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER
Note: Windows 98SE users must install the camera driver first. Windows 2000 users must install DirectX in order to view video clips on the computer. Please refer to the Installation Guide section on page 30 in the 28 SEC 28 SEC 003/016 003/016 User's Guide for more information on installing the drivers and other software found on the CD-ROM. Caution: Do not insert or remove the memory card when the camera is connected to the computer.
Downloading files from the camera: Internal memory: Do not insert the memory card. Memory Card: Insert the memory card. FOR WINDOWS USERS 1. Connect the camera to the computer. 2. Double-click on My Computer>Removable Disk>DCIM>100CD_3042. The stored pictures (JPG) and video clips (AVI) stored in the memory card will be displayed 3. Click and drag the files into a directory in your computer to save them. To select all files, click Edit > Select all. FOR MACINTOSH USERS 1. Power on the camera. 2. Connect the camera to the computer. After a few moments, the external hard drive untitled will appear on the desktop. 3. Double-click on untitled>DCIM>100_3042. The stored pictures (JPG) and video clips (AVI) stored in the memory card will be displayed. 4. Drag and drop the image you want to save in the computer. To select all files, click Edit > Select all.
Concord, Concord Eye-Q and the Concord Eye-Q logo are registered trademarks or trademarks of Concord Camera Corp., in the United States and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac and Macintosh are registered trademarks or trademarks of Apple Computer, Inc. in the U.S. and other countries. All other brands and product names are either registered trademarks or trademarks of their respective owners.

Page 7

GUIDE DE DEMARRAGE RAPIDE

FRANAIS

Les rfrences de ce guide de dmarrage rapide vous permettent dutiliser rapidement votre nouvel appareil digital. Pour des explications plus dtailles sur toutes les caractristiques de votre appareil, veuillez lire le guide de lutilisateur qui se trouve sur le CD-ROM situ dans le coffret du Concord Eye-Q 3042AF. Avant dutiliser lappareil, veuillez lire toutes les instructions de scurit et de prcaution dcrites dans ce guide.

Version 1.0 513441-00

Technical Support Hot Line: Toll Free In the USA & Canada 1-866-522-6372 Toll Free In Europe UK: 0800-169-6482 BELGIUM: 0800-787-57 FRANCE: 0800-917-599 GERMANY: 0800-1800-563 SPAIN: 900-973-195 ITALY: 800-781-883 All Other Countries - Toll 31-53-482-9779