Mentor II

Digital DC Drive 25 A-1850 A
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Mentor II: the most versatile DC systems drive in the world
The Mentor ll provides a wide power range of fully programmable DC drives with a unified control interface. Simple stand-alone applications are quickly configured with a minimum of parameters. Add the application module (MD29) to implement high performance drive systems with local intelligence. This intelligence can then be utilised to eliminate the master PLC by constructing a distributed control system, using the CTNet fieldbus with the System Programming Tool (SYPT). When integration with a master PLC system is required, a range of fieldbus adapters is available. Wide range of network communication options Integrated communication to PLC and host computer User configurable analogue and digital drive inputs Reduced commissioning time with simplified drive set-up Elongation or shrinkage control through position synchronisation Constant web tension by continuous torque adjustment Easy to use PC configuration Software: Mentorsoft. Better Control A comprehensive self-tuning algorithm gives improved current loop performance for a more uniform response at all speeds. Drive performance is also enhanced with full PID digital speed control. More Functions The main circuit board has been developed to incorporate many additional features as standard not as costly options. These include serial communications and a field-weakening controller for constant power applications (M25 - M210 R). Massive Systems Potential All analogue inputs and most of the digital control inputs are userconfigurable, making Mentor II a true systems drive having more versatility and flexibility than ever before. Wide Ranging, More Flexible Communications A standard RS485 port enables Mentor II to communicate directly with PLCs and host computers. Optical Isolation means that a number of drives can be multidropped onto a standard RS485 interface for networking with other control devices. A port is also provided to accept interface cards for CT Net, Profibus-DP Interbus S and DeviceNet. , Mentorsoft WINDOWS Based commissioning tool
Simple Operation Easy set up of the drive can be done using the main control panel or via a standard communications interface from a host computer. All operating parameters are organised into logically structured function menus. Fast configuration of standard applications can be achieved using 10 parameters or less. Faster Drive Set-Up Programming the Mentor II has never been easier. Designed to save commissioning time the drive has comprehensive data displays, easily assimilated function menus and a five-key control panel.
. A flexible digital DC drive for.
multiple plant applications
CT Net Interface (MD29AN) High speed network protocol De-centralised peer-to-peer networking requiring no master PLC controller Programmed using SYPT Profibus-DP Interface (MD24) High speed network protocol Works on a centralised network system Generic configuration file available for Siemens S5 PLC DeviceNet Interface (MD25) High speed network protocol using the CAN hardware layer Works on a centralised network system EDS files available Interbus-S Interface (MDIBS) Easyfit interface card for Interbus-S network communications Works as a centralised master controller 500 kbit/sec fixed data rate Network loss detection Expansion I/O Module (I/O box) Connects to the MD29 using RS485 comms and provides remote I/O capability 5 analog inputs 3 analog outputs 8 digital inputs 8 digital outputs Digital I/O expandable to 32 inputs and 32 outputs Up to 15 I/O Boxes can be controlled on one serial communications link 100 metres (330 feet) maximum serial - communications cable length Field Controller For DC Motors (FXM5) Armature voltage feedback 220 V to 600 V DC Field current to 20 A 1phase input Half or fully controlled thyristor output
Standard Features Microprocessor based control circuits Logical push-button programming Advanced auto-diagnostics Software expandable Regeneration up to 1.15 x VRMS Serial interface - RS232/485 Non-volatile memory for parameter storage Single and four quadrant models Armature voltage, tacho or encoder feedback Phase sequence tolerant 0.025% resolution for analogue speed demand 0.1% speed holding for 100% load change with tacho feedback Field loss protection Electronic motor-overload protection Feedback loss protection Phase loss protection 150% overload capacity for 30 seconds Taper current limit Armature current slew rate limiting

Easy Expansion

Application Module (MD29) Easy plug in second processor Cost saving facility to write application specific programs without the need to use a PLC or stand alone controller Programmed using DPL or SYPT an IEC 1131 compliant programming tool incorporating ladder and function block programming. Embedded single axis position controller

Multiple application solutions
Digital Speed And Position Loop This allows several drives to be run in speed or position synchronisation. Shaft positions can be offset or an adjustable speed ratio introduced to control elongation or shrinkage in applications such as plastics extrusion, wire drawing and textile manufacture. Centrewinder Designed for maintaining a constant web tension in coiling and uncoiling applications mainly in the paper, wire, plastics and metals industries. The drive torque is continuously adjusted to compensate for changing coil diameter, machine losses and coil inertia. Shaft Orientation This allows the user to specify the final position of the motor shaft relative to an electronic feedback datum, for example a marker pulse from an encoder. The position is adjusted by simply changing the value of the appropriate parameter. An output signal is provided on completion of orientation. This
function is widely used for CNC machine toolchanging and other automated applications. Field Controller On drives from M25 M210/R the MDA3 controller is fitted as standard. The field controller provides total control over the motor field current such that a constant kW characteristic can be obtained. This facility is particularly useful for constant power applications such as machine tools, mixers, coilers and winders. An integral field failure detector ensures full protection, and full digital control assists commissioning and operation. A fixed field supply is provided on units in the range M350 M1850. For applications requiring a field controller of up to 20 A the FXM5 is available. S Ramp This facility provides a curved function at each end of a user defined acceleration/ deceleration ramp. The S ramp in each quadrant is determined by parameters which control the linear part and the curved part of the S respectively.

S-RAMP acceleration/time

S-RAMP velocity/time
Due to the greater smoothness and progressive speed transitions, typical applications are lifts, hoists, cranes and conveyors.

Technical data

DRIVE RATINGS Drive type & Model Four Single Quadrant Quadrant
M25 M45 M75 M105 M155 M210 M350 M420 M550 M700 M825 M900 M1200 M1850 M25R M45R M75R M105R M155R M210R M350R M420R M550R M700R M825R M900R M1200R M1850R
Typical (1) Motor Rating @ 400 DC

KW 7.30 37.750

Maximum Continuous Current Rating (Amps)

AC Input 1000 1540

DC Output

603 1105

1200 1850
(1) This rating may be increased at higher armature voltage. (2) DC fuses must be fast semiconductor type, with a rated voltage of 500V DC for 400V supply and 700V DC for 480V supply. (3) The cable sizes are for 3-core (3-wire) and 4-core (4-wire) pvcinsulated armoured (conduited) cable with copper conductors, and laid in accordance with defined conditions. (4) Typical wire gauge sizes based on 300C (860F) ambient, 1.25 x rated current, 750C (1670F) copper wire with no more than 3 conductors in a conduit or raceway. Branch circuit protection must be provided by the user. All wiring must conform to NEC Art. 310 and applicable electrical codes. (5) Not required for Single Quadrant. May not be required in applications where load inertia is low and regeneration infrequent. (6) Refer to NEC Table 310-16 for wire sizes. (7) M25 - M210 fitted with MDA3 field controller as standard. (8) Fixed voltage. Optional field controller FXM5 available.

INSTALLATION DATA

Drive Type & Model Single Quadrant M25 M45 M75 M105 M155 M210 M350 M420 M550 M700 M825 M900 M1200 M1850 Four Quadrant M25R M45R M75R M105R M155R M210R M350R M420R M550R M700R M825R M900R M1200R M1850R Recommended Fuse Ratings Semiconductor (2) HRC AC In (A) AC In (A) DC Out (A) 2x700 2x(5) 70 (5) 125 (5) 175 (5) 250 (5) 300 (5) 550 (5) 700 (5) 900 (5) 1000 (5) 1200 (5) 2x700 (5) 2x900 (5) 2x1000 (5) Typical Cable Size AC Input & DC Output mm2(3) 4mm2 6mm2 25mm2 35mm2 50mm2 95mmmm2 185mm2 300mm2 2x185mm2 2x240mm 2x240mm2 3x400mm2 3x400mm2 AWG (4) 2 1/0 3/0 300MCM (6) (6) (6) (6) (6) (6) (6) (6) Convection Convection Convection Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Fan Cooled Max Field Current Rating (A) 8 (7) 8 (7) 8 (7) 8 (7) 8 (7) 8 (7) 10 (8) 10 (8) 10 (8) 10 (8) 10 (8) 20 (8) 20 (8) 20 (8)

Cooling Method

www.emersonct.com

Mentor II

The Intelligent Drive

Overview

DC drives are widely used in applications that require regeneration, precise speed control, dynamic performance, and constant torque over wide speed ranges. The Mentor II delivers the universal DC drive solution. Simple stand-alone applications are easily configured to control motor speed, voltage or current using standard internal settings. Set-up is convenient using the drive keypad, CTKP remote keypad, or MentorSoft, a Windows based drive configuration tool. The Mentor II has extensive diagnostic and communication abilities that enhance system reliability. The drives standard yet powerful microprocessor is a versatile system component that can eliminate the need for a PLC with integral functions such as thresholds, timers and logic gates that perform basic control. The simple addition of the MD29, a 32-bit application coprocessor card, provides high performance drive systems with local intelligence for true distributed control. The MD29 enables users to incorporate custom or proprietary process control application programs to their drive. The Mentor II also provides a wide range of communication protocol options. Mentor II systems have proven to be extremely reliable and are ideally suited to web handling, winders, slitters, extruders, wire drawing, converting lines, and plastics production. The Mentor IIs integrated design and highly programmable features make it an ideal choice for OEMs and System Integrators, as well as replacement or retrofit drives for End Users.

Extrusion Intelligent

Microprocessor Based Digital DC Drive 5 to 1000 HP, 3 phase, 208 to 660 VAC Regenerative and non-regenerative models RS485 serial communications Extensive fieldbus communication capabilities Plug-in 32-bit application coprocessor card (MD29) MentorSoft Windows-based drive configuration tool Complete Motor Solutions

Digital Drive

1-800-893-2321
Feature Performance Advantage
Accepts wide range of supply voltage (208 to 660 VAC) Can be applied to worldwide voltages Non-regen and regen models share the same footprint Allows for common mechanical design and mounting MentorSoft Windows based drive configuration tool Provides easy programming and diagnostics of the drive 32-bit application coprocessor card (MD29) Enables customized applications for distributed control system architectures Profibus-DP, Modbus+, Modbus RTU, Interbus-S, DeviceNet, and CTNet plug-in communication cards Communicates on users preferred network Built-in RS485 serial communications Allows for easy programming and control of drive Extensive and configurable analog and digital I/O Customizes drive to specific applications Programmable boolean logic (AND, NAND, OR, NOR) gates with delay outputs Assists with general system interface logic needs, expanding application possibilities Programmable threshold comparators Expands application possibilities by providing a pair of independent numerical comparators with adjustable hysteresis Built-in digital lock function for frequency following Allows accurate master/slave applications Accepts DC tachometer and encoder feedback Enables precise speed control Extensive diagnostics and fault indicators Used for accurate drive system diagnosis

Ratings: Mentor II

THREE PHASE INPUT 3 to 500 HP (208-230 VAC) 5 to 1000 HP (380-460 VAC) Special Order (525 / 660 VAC), Models M350(R)M1850(R) only) 208 / 240 VAC Motor HP Output Output Field Non-Regen Current Current Output Catalog (A) (A) Current Number (@40C) (@55C) M25-14M M45-14M M75-14M M105-14M M155-14M M210-14M M350-14M M420-14M M550-14M M700-14M M825-14M M900-14M M1200-14M M1850-14M Regen Catalog Number M25R-14M M45R-14M M75R-14M M105R-14M M155R-14M M210R-14M M350R-14M M350R-14M M550R-14M M700R-14M M825R-14M M900R-14M M1200R-14M M1850R-14M

3-7 7.5 - 20 - 40 - - - 500

8A Current Regulated

10A Fixed Voltage 20A Fixed Voltage
Field Non-Regen Motor HP Output Output Current Current Output Catalog (A) (A) Current Number (@40C) (@55C) 5 - - - - - 600 - - 1620 M25-14M M45-14M M75-14M M105-14M M155-14M M210-14M M350-14M M420-14M M550-14M M700-14M M825-14M M900-14M M1200-14M M1850-14M
Regen Catalog Number M25R-14M M45R-14M M75R-14M M105R-14M M155R-14M M210R-14M M350R-14M M350R-14M M550R-14M M700R-14M M825R-14M M900R-14M M1200R-14M M1850R-14M
For field control, add external field regulator P/N 9500-9035.

Order String

M XXX R - 14M Factory Assigned Regen (omit for Non-regen) Output Current Mentor II Product Family

380 / 480 VAC

Terminal Diagram: Mentor II

, (300mA max.)

Terminal Description

Function

+10 VDC -10 VDC Speed Reference Analog Input # 1 #2 #3 #4 Motor Thermistor DC Tachometer (-) DC Tachometer (+) Armature Current Image Analog Output # 1 #2 #3 Digital Output # 1 #2 #3 #4 #5

Type/Description

Reference Supply Analog Input, 12 bit
10 mA max 10 VDC, 100k Ohms or 4-20 mA, 100 Ohms
0V Common F1 (Run Permit) F2 (Inch / Jog Reverse) F3 (Inch / Jog Forward) F4 (Run Reverse (latched)) F5 (Run Forward (latched)) Digital Input F6 F7 F8 F9 F10 Drive Enable Reset +24 VDC Supply Form C Status Relay (Zero Speed) Form C Status Relay (Drive Ready) 0V Common
Circuit Common Digital Input

+24 VDC, 10k Ohms

Analog Input Bi-polar, 10 bit + sign 10 VDC, 100k Ohms Analog Input Analog Input Circuit Common Analog Output 3k Ohms trip point, 1.8k Ohm reset level

Digital Input

6.6 VDC @ 150% current 10 VDC, 5 mA
Analog Output Bi-polar, 10 bit + sign
Digital Output Open Collector

+24 VDC, 100 mA

Digital Input Digital Input User Supply Relay Common N. C. Contact N. O. Contact Relay Common N. C. Contact N. O. Contact Circuit Common

30 mSec inhibit delay Fault Reset 200 mA max 110 VAC, 5A resistive

110 VAC, 5A resistive

Programmable Analog scaleable

Programmable Digital

All Analog I/O is
Specifications: Mentor II

Environment

Ambient Operating Temperature Cooling Method Humidity Storage Temperature Altitude 0 to 40C (32 to 104F) Derate current 1.5% per C to 55C (32 to131F) Convection and forced convection, model dependent 95% non-condensing at 40C (104F) -40 to 55C (-40 to 131F) 0 to 4000m (13,120 ft). Derate 1% per 100m (328 ft) between 1000m (3,280 ft) and 4000m (13,120 ft). Chassis (IP00)

Power Supply

Internal power supply out of tolerance
Serial Communications Mode 3 serial comms data loss Loss Processor 1 Watchdog Trip Processor 2 Watchdog Trip Hardware Fault Memory Fault External Trip Software Fault (A29) Main control processor fault Second control processor fault (MD29) Hardware malfunction on control board Stored parameter checksum fault User interlock fault (programmed) MD29 software fault

Enclosure

Approvals & Listings
UL, cUL CE ISO 9002 File #E58592 Vol. 5C Section 1 Designed for marking Certified Manufacturing Facility

AC Supply Requirements

Voltage 208 to 480 VAC -5%, +10% 525/575/660 VAC 10% (Optional M350 and above) to 62 Hz 98%
Phase Frequency Efficiency

Dimensions

Control
Feedback Methods Armature Voltage (resolution.83 volts) DC Tachometer (resolution 0.1%) Encoder (resolution.01%)

Field Control

PA RA ME TE R DA TA
Analog Input Resolution 12 bit (Qty 1), 10 bit (Qty 4) Serial Communications 4-wire RS422 or RS485, optically-isolated Protocol is ANSI x 3.28-2.5-A4 Baud rate is 4800 or 9600

PA RA ME TE R IN DE X

Dri ve Ala Read rm y Ze ro Ru speed n for Ru wa n rev rd Bri dg erse Bri e 1 dg At e 2 sp Cu eed rre nt lim it

Protection

AC Line Undervoltage Trip MOV Voltage Transient Protection Instantaneous Overcurrent Trip Armature Open Circuit Drive Overload Trip Phase Loss Trip Overtemperature Trip Motor Thermal Trip Feedback Loss Feedback Reversal Field Loss Field On Field Overcurrent Current Loop Loss External Power Supply 180 VAC Input transient suppression 300% armature current Armature circuit is open Inverse time, 150% for 30 seconds Loss of input phase Heatsink exceeds 100C (212F) Motor over-temp switch or Thermistor Loss of motor feedback Tachometer or Encoder wired backwards No field current Field current during auto-tune Field current greater than field demand Loss of 4-20 mA reference Short circuit on +24 VDC user power supply
* Approximate, not to be used for construction purposes.
Catalog Number M25-14M thru M75-14M M25R-14M thru M75R-14M M105-14M thru M210-14M M105R-14M thru M210R-14M M350-14M thru M420-14M M350R-14M thru M420R-14M M550-14M thru M825-14M M550R-14M thru M825R-14M M900-14M thru M1850-14M M900R-14M thru M1850R-14M

Size* (in.) HxWxD 15 x 10 x x 10 x x 10 x x 10 x x 18 x x 18 x x 18 x x 18 x x 18 x x 18 x 20
Approx. Weight (lbs.) 154 264
Current regulated 8 Amps max (M210/M210R and smaller) Voltage regulated.675 or.9 X Line-to-line voltage (M350/M350R and larger)
Options / Software / Accessories
Network Communication Cards
The fieldbus interface cards provide high-speed communications using the popular networks and protocol. These networks allow large amounts of data to be transferred quickly to and from network nodes. The RS485 channel is optically isolated (CTNet is transformer isolated) for added protection.
Application Cards (MD29 & MD29AN)
The MD29 (9729-9000) and MD29AN application cards contain a high-speed microprocessor which provides a low-cost facility for a system designer to write application specific programs without needing a PLC or other stand-alone controller. The add-on cards fit into a 40-pin header within the Mentor II drive. It is programmed (via the RS232 port) using our Control Techniques SyPT (System Programming Toolkit) that complies with IEC1131-3 Ladder / Function Block or DPL (Drive Programming Language). In addition to the application coprocessor, the MD29AN CTNet card supports peer-to-peer cyclic and broadcast messaging at rates up to 5Mbaud. The application cards use dual port RAM to provide intimate high-speed bi-directional access. They can read and modify any parameter within the drive, enabling customized real-time calculations under a multi-tasking run-time environment. The Intel i960 32-bit RISC processor and 256K of user program FLASH memory (equivalent to >2000 lines of ladder logic or basic instruction code) provide a powerful base for a designer to accomplish complex algorithms for demanding timecritical process control. The optically isolated RS485 channel serves as a communication port for our CTIU operator interface units. It is fully configurable, supporting multiple communication modes including an ANSI 2 or 4-wire protocol at data rates up to 38.4kbaud. A Modbus protocol with RTU and ASCII slave modes is also available. 32-bit coprocessor (MD-29)..9729-9000 32-bit coprocessor with CTNet.MD29AN-RevD*
*RevD for current product, see page 148 for details.
Pre-configured Application Programs* S-ramp accel / decel profiling Digital lock with adjustable ratio control Spindle orientation Constant tension, center wind (CTCW) PID control for load cell tension or dancer position Power calculations Dual Mode Winder
* Contact Control Techniques for detailed information.
Communication Protocol Profibus-DP Interbus-S CTNet* DeviceNet Modbus RTU* Modbus+
Interface Module Catalog Number MD-24 MDIBS MD-29AN* MD-25 9729-9000* 9500-9100
System Configuration Master / Slave Master / Slave Peer-to-peer Master / Slave Master / Slave Master / Slave

* CTNet and Modbus RTU cards contain full coprocessor ability. Refer to the Application Cards (MD29 and MD29AN) for more information.

Network Communications

Catalog Number 9729-9001 9729-9002 9729-9003 9729-9004 9729-9005 9729-9006 9729-9008

MD-29AN

Mentor II PC to Drive Accessories
Drive Configuration Tool (MentorSoft)
MentorSoft is a complimentary Windows based drive configuration tool designed to enable the complete control and display of all parameters within a Mentor II. Functions within MentorSoft allow data to be uploaded, viewed and saved or retrieved from disk, modified and printed. It can be used off-line in the office or on-line on the plant floor. MentorSoft communicates with the Mentor II via the computers serial port to the drives RS485 port using a communications cable (CTD-PC-485-XXX). (XXX = ft.) Some of its many capabilities include: Commissioning screen displays wiring and control logic Compare functions compares current drive configuration with previously stored versions

Operator Interfaces

Universal Keypad (CTKP)
The CTKP Universal Keypad is an ideal maintenance tool for use with CTs digital drives (SE, Unidrive, Mentor II, Quantum III) and option modules (UD7X, MD series). Five navigation keys and plain text parameter descriptions make the CTKP easy to use for viewing and modifying drive data. The keypad is designed for handheld or panel mounting. The IP65 rating, screw-down terminals and stress relief for cable connections assure a rugged and robust design. For more information, refer to the Accessories Section on page 154.
Operator Interface Unit (CTIU)
Built-in reference manuals and search functions provide extensive Help files for both the drive and the software For more information, refer to the Accessories Section on page 138.
The CTIU operator interface units incorporate a back-lit LCD display and five easy-to-use navigation keys. Using the intuitive WYSIWIG page editor, they can be programmed to display a variety of menus, submenus, alarms, fault conditions and other critical information. The CTIUs support a range of capabilities including multiple font sizes, real time trends and graphs, scheduling and background programs. They communicate via 2 or 4-wire RS485 and to simplify installation, CTIUs are rated NEMA 4/12 and require no screw mounting holes. For more information, refer to the Accessories Section on pages 152-53.

User screen customized by the user with up to 15 key parameters

Remote I/O (I/O Box)

The I/O Box expands the I/O capabilities of the Mentor II and Quantum III drives. The I/O Box is connected to the drive through the MD29 / AN application card using an optically isolated RS485 serial link. Specifications
Voltage 110 to 240 VAC 10% Frequency 48 to 62 Hz Phase RS485 Interface 1 Supports binary protocol at data rates up to 38.4kbaud for connection to a single drive.
Field Regulators (FXM Family)
The FXM family of field regulators is designed to control the field current of DC motors up to 90 amps. When used in conjunction with either the Mentor II or Quantum III variable speed DC drives, the field regulator is controlled directly via the drive parameters. This allows full customization of the field control for any application. The FXMs can also be used as stand-alone units when retrofitting existing applications. The field regulators are single phase, controlled thyristor rectifier bridges with a control logic PC board. The bridge can be configured by jumpers to operate in half (single quadrant) or full (two quadrant) control mode. The FXMs may be independently controlled by an external reference, or set for automatic field weakening (constant horsepower) or constant field current. Field economy control via contact or logic input and a field loss relay for protection are provided for stand-alone operation. The unit also has a bar graph display (10% increments of the selected range) for field current magnitude.
Qty 8 Type / Description Analog Input (12 bit) Analog Input (10 bit) Analog Output (10 bit) Digital Input Digital Output Notes 10 VDC, 100k Ohms or 4-20 mA, 100 Ohms 10 VDC, 100k Ohms 10 VDC, 5 mA +24 VDC, 10k Ohms +24 VDC, 100 mA (200 mA total for all outputs)
Catalog Current Frequency Input Voltage Number (A) (Hz) (VAC) 9500-/ 380 / 240 / 480 9500-/ 380 / 240 / 480 9500-/ 380 / 240 / 480
Field current is the controlled variable.
Output Voltage* (VDC) 198 / 342 / / / 342 / / / 342 / / 432

* Maximum output voltage equals 90% of input RMS line voltage.

Critical Components

Warranty

Extended Warranty

An industry-leading two-year warranty is standard for Mentor II drives. An extended warranty is available that increases the warranty period to five years.
Mentor II Model Catalog Number M25WE M45WE M75WE M105WE M155WE M210WE M350WE M420WE M550WE M700WE M825WE M900WE M1200WE M1850WE
Minimize Your Machine Downtime Delays All too often, spare parts are over looked which results in a panic search, no less the possibility of costly Next Day shipping expenses. Having these items on hand can reduce the associated stress of machine downtime. To facilitate this effort, Control Techniques has assembled several levels of Critical Component kits to fit within your maintenance budget constraints. These preassembled kits represent a significant savings over purchasing the same items separately.
M25 M45 M75 M105 M155 M210 M350 M420 M550 M700 M825 M900 M1200 M1850
1 MDA1 Control board 1 MDA2B Interface board 6 Power board fuses M350-825-SP 1 MDA1 Control board 1 MDA2B Interface board 6 Fuses for MDA5 Filter board 6 Fuses for MDA6 Power board M900 M1850 M900-1850-SP 1 MDA1 Control board (non-regen) 1 MDA2B Interface board M900R M1850R M900R-1850R-SP 1 SCR heatsink assembly (regen) 6 6A fuses for MDA6 board 2 2A fuses for SD1 board 2 30A fuses for SD1 board
Drive Frame Size M25 M210 (non-regen and regen) M350 M825 (non-regen and regen)

Kit Cat. No. M25-210-SP

Description