Helium / Hi-Float Adapter Instruction Sheet
Hi-Float Adapter - Set Up
Firmly press-fit connect the Helium/Hi-Float Adapter on to the outlet of the Hi-Float pump. The Adapter has a locking ring that will hold it in place.
Attach the helium line to the filling outlet of a Duplicator 2 inflator or Dual Split-Second Sizer.
Set the Duplicator 2 or Dual Sizer to the appropriate size setting for 11-inch or larger balloons. Note, if using a Dual Sizer, be sure to set the inflator mode to operate from one outlet not both.
Place the Hi-Float clip on the stem of the Hi-Float pump. (Clips are included with the Hi-Float pump.) See www.Hi-Float.com for Hi-Float recommendations.
Hi-Float Adapter - Inflating Instructions
Hold the balloon under the Helium/Hi-Float Adapter with the silver outlet in the center of the balloon.
Press the pump to inject the HiFloat into the body of the balloon. Rub the balloon to evenly coat the inside of the balloon with Hi-Float be sure not to get Hi-Float into the neck of the balloon.
Tap the foot pedal of the Duplicator 2 or Dual Sizer to automatically inflate the balloon to the perfect size.
Pinch the neck of the balloon and remove it from the filling outlet. Wipe off any excess Hi-Float from the outlet.
Removing the Helium/Hi-Float Adapter
To release the Helium/Hi-Float Adapter from the HiFloat pump press the locking ring down with your finger nails. This will release the Adapter and it will easily slide off the pump. Be sure to depress the locking ring fully before pulling the Adapter off the pump.

Maintenance Tips

Always cover the tip of the Helium/Hi-Float Adapter with the red plastic HiFloat pump cap when the unit is not in use. This prevents Hi-Float from clogging the Adapter. (Note, if you misplace the pump cap, a 5-inch or smaller balloon stretched over the tip works well.) If Hi-Float clogs the Helium/Hi-Float Adapter remove the Adapter from the pump and flush it with warm water. Warm water dissolves dried Hi-Float.
Hi-Float Power Pump Instruction Sheet
Hi-Float Power Pump - Set Up Tips
T-4-2 Adapter If the balloons are going to be treated and immediately inflated use the T-4-2 Adapter on a helium cylinder. Use a wrench to tighten the T-42 Adapter to the helium cylinder. The T-4-2 Adapter will enable two regulators to work off one helium cylinder. Hand-tighten the Power Pump regulator and the Duplicator 2 or Dual Sizer regulator to the T-4-2 Adapter. If youre pre-treating balloons with Hi-Float to be inflated at a later time, nitrogen is a more economical gas to use. Follow Hi-Floats charts and recommendations to use the appropriate amount of Hi-Float in the balloon. Visit www.Hi-Float.com to learn more about working with Hi-Float. If pre-treating balloons to be filled with helium at a later time, skip step 3.
Connect the Power Pump regulator to a nitrogen or helium cylinder.
Place a large bottle of Ultra Hi-Float on the holder and secure in place with the Velcro belt.
Hook the wire loop under the pump handle. Place the 11-inch Hi-Float clip on the Hi-Float pump (included with the HiFloat pump).
Follow the instructions on the reverse page to set-up the Helium/Hi-Float Adapter.
Hi-Float Power Pump - Operating Instructions
Press the button on the control box to activate the Power Pump. Hold down button until the pump depresses fully. (Consult Balloon Size Chart at right) Rub the balloon to evenly coat the inside with Hi-Float. Be sure not to get Hi-Float into the neck of the balloon.
Tap the foot pedal of the Duplicator 2 or Dual Sizer to automatically inflate the balloon to the perfect size. Pinch the neck of the balloon and remove it from the filling outlet. Wipe off any excess Hi-Float from the outlet.

Balloon Size Chart

11-inch Balloons press button 1 time. 14-inch Balloons Press button 2 times. 16-inch Balloons Press button 3 times.

Service & Warranty

For assistance with service & repair issues, or for warranty information, please visit ConwinOnline.com, or call (818)246.9233

Designs

Galleries

.and more!

Projects

Online

Conwins Masterpiece Series Videos
These exciting instructional videos feature the industry's top balloon artists sharing their secrets of the trade on everything from the latest decorating techniques to business management and marketing skills. Visit ConwinOnline.com to see our complete line of educational videos.

10292004

Visit www.ConwinOnline.com today!

CPort.PS05.1-7&32.EU.1

6/20/05

3:51 PM

Page 1

c o n w i ns

port folio

PRODUCT SHOWCASE

wedding

projects

centrepieces

balloon bulbs

p l u s

Ba VO l Maloon Bes TED nu Acc t 200fact esso 5 urer rie s

special effects

Page 2
flects our Portfolio re ving his issue of chie.T r service. A for growth is primed nd custome ustomers to grow industry ducation, a led our c lopment, e an balloon rt has enab he Europe ment to product deve T t and suppo mmit uipmen ongoing co sults with Conwin eq Sue al re headed by profession K office is orldwide. ropean rU esses w onwins Eu onwin. Ou their busin riority at C n Bowler, C activities, from has top p er, and Joh cational n customers nd Marketing Manag ope of edu chnical ur Europea a erving o ng a wide sc UK. John provides te an Sales S , Europe oordinati eston estions or e and the nsible for c Marston-W ue is respo ou have qu hout Europ Manager. S ning throug n Service Centre. If y ervice Centre for General product trai ins Europea Online S our support to or visit our es Conw.com to see distributor UK office and overse winOnline eries on our pport sterpiece S se contact port, visit C product su onwins Ma ge. ational sup needs, plea ice educ seminars, C e cutting ed product serv g tips and advice. For ing addition to Michael W stay on th ootin alendar. In troublesh cation c t ow you to du Presiden Centre all w rnational e cts, and ne line Design current inte ative produ and our On am eos eas, innov Design Te training vid you fresh id ull see our ire. e pages yo ve to bring e stri gh th our reperto Portfolio w ess. As you flip throu an add to y Portfolio uc e of g Conwin usin cor that yo In each issu to sell usin row your b g original balloon d to g nt and easy n dcor featured in n inspiration in equipme o work creati using Conw the spectacular ballo en hard at create has be ed by are easy to gns l be impress These desi stomers wil gram rs. Your cu lete the pro Builde es to comp ers. uild ustrys best right suppli Portfolio B inding the balloon ind our ing point. F red with some of the start rvices for y ment is the sue weve partne ducts and se ducts uip n urce for pro s. Their pro eed. is is Conwin eq ton-Westo hensive reso progressive companie p. Inside th ste Sue Mars to succ ompre is the next these Sales and g you need unlimited! ou with a c European to support provide y h everythin ibilities are Manager suppliers to ss. We encourage you ide you wit Marketing b, the poss e e and prov r the jo wins lin on busin fo ballo ent Con right tools s complem y, and the and service n, creativit inspiratio With a little success, Prepare for

ing Michael W President

ler John Bow ean Europ anager General M

ON THE COVER:

Conwins Design Team
Our Design Team is here to help you grow your business with their creative ideas and best-selling designs.

Pictured left to right:

This enchanting Balloon Bulb design was created by Jodie Norris, international instructor and member of the Conwin Design Team. See page 12 for details.
Jodie Norris, Sue Marston-Weston, Jan Iiams and Crystal Narramore

Page 3

new in this

Portfolio Builders

PAGE 28

The Conwin Advantage

STATE-OF-THE-ART ENGINEERING
Keep your portfolio up to date with 16 new and exciting images. Buy the complete collection and save!
New Simplified Easy-to-use

PAGE 12

Balloon Bulbs
Light up your next event with Conwin Balloon Bulbs. Theyre spectacular, indoors or out.
Ongoing research and product development take top priority at Conwin. From the digital Dual Split-Second Sizer to pneumatic, nonpyrotechnic Balloon Exploders, Conwins well engineered products provide balloon decorators with the competitive edge. Youll have confidence on the job knowing that all Conwin products are manufactured in strict accordance with European standards and that all electrical units are CE approved. Conwins commitment to technology and safety is the key to our success.

LIFETIME WARRANTY

PAGE 15

Air-Pro Inflator

Newly released in the European market, the Air-Pro Inflator is fast becoming a new favorite for decorators, twisters and balloon retailers alike.
Conwin products are backed by a lifetime warranty for material defects and product workmanship. Visit our Online Service Centre for complete details. Here youll find helpful trouble-shooting advice and answers to frequently asked questions. If your Conwin product requires service, you can rely on our UK service centre. Working directly with our knowledgeable service team youll be assured your product is properly and quickly serviced.

AWARD WINNING RECOGNITION
Soft-touch Push Valve This breakthrough design combines the benefits of a fast-flow push valve with the soft-touch control of a tilt valve.

Latest Upgrades

PAGE 17
Research and development is ongoing at Conwin. Here are a few of our latest upgrades that make our equipment the best in the industry.
Durable Ribbon Cutter Now features an integrated disc tyer post and ribbon guide. Fast-Flow Foil Push Valve Inflates foil balloons up to 20% faster!
Our close involvement with the balloon industry since its inception has given us the advantage of working with industry leaders worldwide. Conwin has had the honour of receiving industry awards in the USA and in Europe, including the industrys top honor, IBACs Crystal Award. This award is presented to companies and individuals whose outstanding contributions have directly impacted and perpetuated the growth of the balloon industry. This year at the International Halloween and Party Show held in Telford, England, we were voted Best Balloon Accessories Manufacturer 2005 Were proud of this recognition and greatly appreciate our loyal customers and industry partners.

Page 4

To fully understand the impact a Dual Split-Second Sizer will have on your business, ask a balloon decorator and theyll tell you its the one inflator they couldnt live without. Like all Conwin equipment,

Portfolio

SE E PA GE

Builders

the Dual Split-Second Sizer is backed by Conwins outstanding reputation for quality and service. If youre serious about growing your business, the Dual Split-Second Sizer is the inflator for you. There are a number of accessories available to customize your Dual Split-Second Sizer. Depending on the needs of your business, we have the right accessory to make your job easier and more efficient. The designs on this page were created using the Double Bubble Outlet, which is included with the Dual Sizer. Visit our online Design Centre to see more great projects using the Dual Sizer.
INCLUDES Double Bubble Outlet
INCLUDES Auto-Fill Foil Outlet
The Ultimate Balloon Decorators Inflator

Dual Split-Second Sizer

THE PROFESSIONALS CHOICE

DUAL SPLIT-SECOND SIZER

See step-by-step projects using the Dual Sizer at
Worldwide the professional's choice! Everyone on your staff can achieve professional results at the tap of a foot pedal. Gets the job done faster, more efficiently, and best of all, more profitably! The Dual SplitSecond Sizer is the most versatile inflator on the market. Precisely adjust the inflation time by tenths of a second for precision sizing of one or two balloons. Works with a helium or nitrogen cylinder, or off of an air compressor. The Dual Split-Second Sizer includes: Double Bubble Outlet, Auto-Fill Foil Outlet, Primary and Second-Stage Regulators, Foot Pedal, Carrying Case. Item #84510

ConwinOnline.com

HOW IT

Speed Control

features built-in Second Stage Regulator.

Three Modes of Operation

1) Inflate 2 balloons to the same size. 2) Inflate 2 balloons to different sizes. 3) Inflate a single balloon.

Page 5

Versatile Accessories 2
For the Dual Sizer & Duplicator

(pg.17)

HELIUM/HI-FLOAT ADAPTER
Make Double Bubbles Its Easy!
Save time by dispensing Hi-Float into the balloon and inflating right from the pump outlet. Easily attaches to the Hi-Float pump outlet with a press-fit connection. The helium supply hose connects to a Dual Sizer or Duplicator 2. Simply place the balloon over the outlet, push the pump to dispense Hi-Float into the balloon, rub the Hi-Float into the balloon, and tap the foot pedal to automatically inflate the balloon. This time saving adapter is a must for retail settings.

Item #36400

HI-FLOAT OUTLET
Inflate balloons neck up without getting Hi-Float into your inflator. Item #36320

ADD-ON FOOT PEDAL

With the add-on foot pedal, two people can use the Dual Sizer or Duplicator 2 at the same time. Item #36330

60/40 HELIUM/AIR OUTLET

Inflate 16 and larger balloons with a mix of 60% helium and 40% air. Save 40% on your helium costs. Item #36310

AIR COMPRESSOR HOOK-UP

Work up to 3.65 metres away. Includes quick disconnect fittings and a filter that prevents foreign particles and moisture from entering your inflator. Learn more at ConwinOnline.com. Item #36340

PORTABLE POWER PACK

Make your Dual Sizer or Duplicator 2 completely portable with the Power Pack. It provides power for over five hours of continual use and features a built-in meter and a recharger. Not designed for use with other electrical products. Item #68010
See this Step-By-Step Project in our Design Centre at
HELIUM/NITROGEN QUICK SWITCH
Snaps on to the back of your Dual Sizer with a quick-disconnect fitting no tools required. Change from Helium to Nitrogen with the flip of a switch. Also works with an air compressor. Includes hose and primary regulator for a nitrogen cylinder. Item #63510

DUAL CANNON OUTLET

Allows you to fire two Confetti Cannons per zone! Use two Dual Outlets, and fire up to four Confetti Cannons from one box. Item #55148

Page 11

t Special Effec ill A he Gue st s Wr T Ne ve Forget!

CONFETTI CANNON

Easy to Charge
The Recharger automatically shuts off when the cannon is properly full.

Easy to Load

Fill the barrel with confetti and hold in place with foil under the locking cap.

Easy to Fire

On cue, push down the detonator button. There are two buttons to fire the cannons independently.

Page 12

BRIGHT

I D E A S WI T H

BALLOON BULBS

Easy to Inflate

Balloon Bulb filling port fits over the outlet on Conwins Air Force 4 or Air-Pro. (see page 15).
Mounts on standard 1/2" (1.25cm) electrical conduit.

Easy to Hang

Thread Archline through the built-in rigging port.

Page 13

esigned exclusively for the balloon industry, Conwins versatile Balloon Bulbs brighten up any occasion, from formal to fantastic!
Create a Glowing Ambience!
Balloon Bulbs are perfect for column toppers. Simply stretch the neck of a 3-foot balloon over the acrylic bulb protector. The unit fits over the outlet of an Air Force 4 or Air-Pro (page 15) for easy inflation. Electric cord can be extended to any desired length using an electrical lead.

Easy to Rig!

The bases of Balloon Bulbs are designed to mount on a standard 1/ 2" (1.25cm) electrical conduit pole, or can be suspended from the ceiling by threading Dacron Archline (pg. 25) through the built-in rigging port. New models do not require control boxes and use 220-volt bulbs.

2005 MODEL

NEW! 2005 BALLOON BULB SET
Create brilliant dcor with Balloon Bulbs. Each long-life, low-temp fluorescent Balloon Bulb (8,000 hour) provides the equivalent brightness of a 90 watt incandescent bulb. Set includes: 2 220-Volt units with 2.4 metre power cords, balloon stretching tool, and carrying case. Everything you need to create spectacular effects. Item # CN86710

BALLOON BULBS COMPONENTS

Light Up the Night!
Starter Kit (Includes 2 Balloon Bulb Units) Item #86810 Balloon Bulb Stretching Tool & Clamp Item #Model Replacement 220Volt Bulbs (2/pkg) Item #37270

Page 14

3:57 PM

Page 15

Maximise your Productivity with State-of-the-Art

Conwin Air Inflators

PRECISION AIR
The ultimate decorators tool, the state-of-the-art Precision Air automatically sizes air-filled latex balloons without heavy cylinders, noisy air compressors, or time-consuming templates. Electrical unit provides digital timing to accurately size two air-filled balloons simultaneously at the touch of the foot pedal control. Inflates 5"-16" round latex balloons and speciality latex balloons 2" in diameter and larger. Includes a Soft Pack Carrying Case. Item #83510

Air-filled Heart Sculpture

page 28

Digital Accuracy
Automatically size two balloons at the tap of the foot pedal.

Small Balloons

Outlets have extension tips to Inflate 5" and speciality latex balloons.

Large Balloons

Remove the extension tips to inflate 9 and larger balloons.

Carrying Case

The Precision Air Inflator includes a soft pack carrying case.
Ideal for Retail Balloon Centres
Ultimate Efficiency Instant duplets and quads. Ideal for multiple workers. Great for balloon drops and large jobs!

ACCESSORIES

AIR-PRO
Conwins new Air-Pro countertop air inflator is ideal for fast inflation of air-filled balloons. The Air-Pro quickly and easily inflates all sizes of balloons by pressing down on the push valve outlet. The push valve features an extension tip outlet for inflating small balloons and foil balloons. The Air-Pro motor runs only during the inflation cycle, making it an ideal inflator for retail settings. Unit features a convenient carrying handle and 2-metre power cord. Item #86510

AIR FORCE 4

Quadruple your production! Features four powerful outlets for fast, simultaneous inflation. Outlets include special tips for inflating small balloons. A 7.6-metre detachable electrical cord completes the package for mobile production. Item #82200 Add-On Foot Pedal Control Ideal for in the shop or on the job. Allows unit to run as needed, reducing noise. Item #35040

CPort.PS05.16-23.EU.1

4:02 PM

Page 16

Design Your Balloon Production Centre
with the Ultimate in Safety and Efficiency!
Conwins Remote Helium Set-Up enables two helium supply cylinders to be safely and conveniently located in a back room, basement, etc. Cylinders are out of customers sight, providing a clean and professional appearance. When your balloon production area is out of helium, simply turn the Cylinder Switch-Over Valve to change to the backup cylinder. Eliminates the need of having workers move heavy cylinders around customers. Your staff will love it!

Front Counter Set-Up

Switch From An Empty Cylinder To A Full Cylinder At The Turn Of A Lever!

(Inflator not included)

(Duplicator 2 sold separately, see facing page)

REMOTE HELIUM SUPPLY

Countertop Outlet Option Under Counter Outlet Option

How To Order:

REMOTE SYSTEMS
ders to the desired from the helium cylin d the distance Measure the distance production counter. Ad location of the balloon ling and drop cei se will travel up to the gth to ensure the helium supply ho nter. Allow enough len m ceiling to the cou add 2% to the down fro ke sharp bends, and se does not kink or ma the ho on that will occur modate the contracti erall length to accom ov urized. when the hose is press balloon n that best suits your Select the Outlet optio untertop Model) er Counter or Co production area. (Und gth of hose for includes the correct len se or, if der the package that Or of ho requires a longer length act Conwins your site. If your site gth of hose, Cont custom-cut len you prefer to order a cover. fice - details on back UK Sales Of essure Hose act length of High Pr t: Please order the ex Importan nstalled the hose have factory-i cannot be altered needed. The ends of the hose d the length of compression fittings an by customers.
Remote Helium Set-Up Packages
A COUNTERTOP OPTION REMOTE HELIUM PACKAGE INCLUDES:
1 Switch-Over Control Unit with 2 Cylinder Hook-ups 2 Cylinder Safety Wall Brackets 1 Countertop Helium Outlet (Fits all balloon inflators) 25' (7.62m) HP Hose Item #88110 50' (15.24m) HP Hose Item #88210 75' (22.87m) HP Hose Item #88310
B UNDER COUNTER OPTION REMOTE HELIUM PACKAGE INCLUDES:
1 Switch-Over Control Unit with 2 Cylinder Hook-ups 2 Cylinder Safety Wall Brackets 1 Under Counter Helium Outlet (Fits all balloon inflators) 25' (7.62m) HP Hose Item #88510 50' (15.24m) HP Hose Item #88610 75' (22.87m) HP Hose Item #88710
Note: Custom Order Remote Helium Set-Up Packages are available. Please contact Conwins UK office- see details on back cover.

Page 17

Basic and Speciality Inflators

NEW OUTLETS

From Retailers and Beginners to Seasoned Balloon Professionals

Adjustable Flow Control

Automatically Inflates Foils
Automatically Inflates Latex Balloons

DUPLICATOR 2

Automatically inflates and sizes latex balloons at the touch of a foot pedal. Includes a separate foil outlet for automatically inflating foil balloons, eliminating costly balloon breakage. The Duplicator 2 is an essential tool for decorators and store owners alike. Duplicator 2 Includes: Primary Regulator, Second-Stage Regulator, Foot Pedal, and Detachable Power Cord. Item #84210 Duplicator Soft Pack Carrying Case Item #36010

10-FOOT EXTENSION HOSE INFLATOR
The 10-ft. Extension Hose Inflators versatile quick-disconnect fitting lets you easily change the hose outlet to meet the specific need of any job. Ideal for use with Hi-Float. Balloons can be inflated downward, away from your face in case of popping. Snap-on outlets sold separately. Inflator Only. Item #81610

SOFT-TOUCH

CUTTER
EXTENSION HOSE INFLATOR SNAP-ON OUTLETS
A. Tilt Valve Outlet Item #36510 B. 60/40 Helium/Air Outlet Item #36530 C. Auto-Fill Foil Outlet Item #36520
D. Trigger Valve Includes 8-inch(20cm) and 2-inch (5cm) tips. D Item #36700

Soft-Touch Push Valve

combines the benefit of the fast flow of a traditional push valve with the soft-touch control of a flex tilt valve. Includes versatile extension tip.

PUSH VALVE

Never Pop a Foil Again!

PRECISION PLUS INFLATOR

The #1 choice for balloon professionals. Automatically inflate foil balloons to the perfect pressure and size using The Precision Plus.Features a separate outlet for manual inflation of latex balloons, hand-tight connection, pressure gauge, ribbon cutter with disc tyer post. Available with Soft-Touch Push Valve or Tilt Valve. Soft-Touch Push Valve Model Item #83010 Tilt Valve Model Item #83100

I N F L AT O R S

EXTENSION TIP

Valved Latex

VERSATILE

Entertainer Balloons

5" Latex Balloons

Foil Balloons

Tilt Valve Option

FOIL INFLATION

FASTER

4:03 PM

Page 18
"Everyday is a great day to celebrate with Anagram Balloons"
For Further Information contact us on
Amscan International Limited, Brudenell Drive, Brinklow, Milton Keynes MK10 ODA Phone: +44(0)Fax: +44(0)orderline Fax 578 E-mail:sales@amscan-uk.co.uk Websites www.amscan.com www.anagramintl.com

Page 19

Page 20

Page 21

Conwin Products for Use with Hi-Float

HI-FLOAT POWER PUMP

The Power Pump automatically dispenses the perfect amount of Hi-Float into the balloon at the press of a button. The Power Pump eliminates worker fatigue caused from repetitive hand pumping motion. The Power Pump works with the Ultra Hi-Float bottle and is powered by a helium or nitrogen cylinder. If you treat a large volume of balloons with Hi-Float, this is the tool for you. Power Pump includes: Regulator, Power Pump with Stand, Control Box, Helium/Hi-Float Adapter for use with Conwin Dual Sizer or Duplicator 2, T-4-2 Adapter (see inset, shown with Precision Plus Inflator, sold separately) to enable two regulators to work off one cylinder. Item #84710
Save time by dispensing Hi-Float and inflating balloons right from the pump outlet. Easily attaches to the Hi-Float pump outlet with a press fit connection. The helium supply hose connects to a Dual Sizer or Duplicator 2 outlet for automatic inflation. Simply place the balloon over the outlet, push the pump and rub the Hi-Float into the balloon, tap the foot pedal of your Duplicator 2 or Dual Sizer to automatically inflate the balloon. The Helium/Hi-Float Adapter is a must for retail settings! Item #36400

T- 4 -2 ADAPTER

Enables two regulators to hook up to one cylinder. Attaches to a helium or nitrogen cylinder with a handtight connection. Ideal for use with Hi-Float Power Pump. Creates an instant double outlet off one cylinder. Item #84810
Inflate balloons neck up without getting Hi-Float into the Dual Sizer or Duplicator 2. Item #36320

Basic Inflators

CONWIN CLASSIC INFLATORS
Convenient and reliable, Conwins Classic Inflators feature hand-tight connections, pressure gauge, and new design ribbon cutter with disc tyer post. Available with New SoftTouch Push Valve or Flex-Tilt Valve (shown below left).
Cylinder Safety Equipment
Soft-Touch Push Valve Model

Item #81210

Flex-Tilt Valve Model

Item #81410

2-WHEEL HAND TRUCK
Features heavy-duty wheels and twoposition safety belt. Item #49820

SAFETY EQUIPMENT

4 -WHEEL HAND TRUCK

THE WORKSTATION

Countertop unit with supply hose enables cylinder to be placed up to 3.65m away. Ideal for creating a safe and efficient balloon centre. Features new Soft-Touch Push Valve for inflation of latex and separate outlet that Automatically fills foils. Item #83410
Designed expressly for the balloon industry to support and transport all size helium cylinders. Features large ball-bearing wheels and adjustable Velcro safety belt. Item #49825

CYLINDER SAFETY STAND

Two adjustable Velcro safety belts secure all size cylinders. Item #30120

ECONOMY INFLATOR

Our most basic model, these durable inflators are great for rental cylinders. Tapered tip enables inflation of latex and foil balloons. Item #81110

SAFETY WALL BRACKET

An economical solution in any work area. Mounts to the wall and secures any cylinder with a Velcro safety belt. Item #30100

Page 22

Page 23

Starter Value Kits

These packages have been created using the knowledge and experience of many industry professionals. Designed to meet the specific needs of in-store retailing and professional decorating, the kits include the necessary equipment required to start working with balloons professionally and profitably.

GREAT VALUE

PACKAGES
Professional Starter Value Kit
This kit is designed to meet the requirements of a balloon professional starting out. Includes: The powerful Air-Pro for air inflating balloons. 10-ft Insider Stuffing Tool Kit with Auto-Fill Foil Outlet to create stunning insider balloons and to inflate foil and latex balloons with helium. Utility Apron and Scissor Keepers (5) to keep those all important tools close to hand. Archline pack and Dacron Archline, a must for any balloon decorator and the indispensable Grip Strips and Grip Tabs. Plus, a set of Portfolio Builders (Series One) to start your portfolio, and all this comes with a very handy Conwin Soft Pack Tool Bag. Professional Starter Value Package Item #80500

VALUE PACKAGES

In-Store Starter Value Kit
Everything you need to inflate both foil and latex balloons with helium or air and create effective point-of-purchase displays. Includes: The powerful Air-Pro for inflating balloons with air. The Duplicator 2, helium inflates both latex and foil balloons to the correct size, Helium/Hi-Float Adapter for easy inflation of Hi-Floated latex balloons, 20 Spool Ribbon Dispenser to keep your ribbons tidy and easy to use, Cylinder Safety Wall bracket ensures a safe working environment. Cylinder Cover to hide unattractive cylinders on the shop floor. Scissor Keepers (5) so you dont misplace your scissors, and Grip Strips, ideal for making point-of-purchase displays with balloons. In-Store Package Item #80600

CPort.PS05.24-31.EU.1

4:14 PM

Page 24

Conwins Professional

Conwins Designer

Ribbon Dispensers

20 -SPOOL DISPENSER

The compact, free standing Ribbon Dispenser features two ribbon cutters and is perfect for use in the shop or on the job. Item #32100

Neon Foam Wire

Great for arrangements, lettering, and fantasy flowers. 10 Metres/Roll

9 Vibrant Colours

Green Purple Red Yellow Pink White Orange Blue Black Item #32200 Item #32230 Item #32260 Item #32210 Item #32240 Item #32270 Item #32220 Item #32250 Item #32280
See Step-By-Step Projects at ConwinOnline.com
Cylinder Cover available on Facing Page

10 Metres/Roll

8-SPOOL DISPENSER
Includes bracket to mount on the wall or on your cylinder. Item #32120
NEON FOAM WIRE VALUE PACK
Buy all nine colours and save! Item #32390

Page 25

Decorating Essentials for Balloon Professionals

SCISSOR KEEPER

Never misplace your scissors again! The Scissor Keeper clips to your Conwin Apron or belt. The retractable 61cm lead line allows freedom to conveniently use your scissors with a wide range of motion. Item #36410 (5/pack)

BALLOON TYING DISCS

Increase your productivity by attaching ribbon and tying balloons in one easy motion. See instructions on ConwinOnline.com. Item #32420 1,000 pkg Item #pkg

UTILITY APRON

Keep all your supplies at your fingertips. Now includes one Free Scissor Keeper. Adjustable belt, one size fits all. Item #36060

ARCHLINE DISPENSER PACK

Easily dispense archline with our convenient Archline Dispenser Pack. Holds two spools of archline, prevents line from free spinning. Clips on belt. (Archline sold separately) Item #36050

ADHESIVE GRIP-TABS

Simply stick the Grip-Tabs to any clean surface and tie on the balloons. Ideal for use with centrepiece designs and exploding balloons. New Super Grip-Tabs are four times as large as standard Grip-Tabs. Super Grip-Tabs are great for securing big bouquets of balloons and can be used for light weight rigging. Regular Tabs Item #32081 (100/pkg) Super Tabs Item #36430 (100/pkg)

BALLOON ARCHLINE

50lb Dacron Archline 274m Item #32050 150lb Dacron Archline 183m Item #32060 50lb Monofilament Archline 228m Item #32170

CYLINDER COVER

Machine washable brightly striped cloth cover fits large-size cylinders and has a drawstring to fit snugly around neck of cylinder. Cover provides a clean and professional look in the shop or on the job. Item #32000

2-WAY HAND PUMP

Quickly and easily inflate balloons with push and pull motion. Great for entertainer balloons. Item #33220

ADHESIVE GRIP-STRIPS

Great for on-the-job decorating and point-of-purchase displays, the sturdy plastic strips have adhesive backing to position them to any clean surface. Item #32070 (10/pkg)

BALLOON CADDY

Balloon Caddy holds balloons and supplies right within your reach. Adjustable velcro belt fits any size cylinder. Item #32020
GRIP GUIDE BALLOON TEMPLATE
Simply reference the size settings on the ruled guide to properly space the uprights and clamp the Grip Guide in place. Item #32090

GRIP-IT BALLOON HOLDER

Great for on-the-job decorating. The grip handle can be conveniently clamped to any countertop or table. Spring holds balloons in place. Item #32190

Page 26

Page 27

Page 28

Conwins Portfolio Builders

8 IMAGES PER SERIES

Impress Your Clients with Professional Presentations
A picture is worth a thousand words. Is your portfolio up to date on the latest? Professional photographs can make the difference between landing a job, or losing to the competition. Conwin's Portfolio Builder images are the perfect solution for making winning presentations to your clients. The pictures are printed on glossy 20cm X 28cm photographic paper. As an added bonus, many of the projects have step-by-step instructions on ConwinOnline.com.

Complete Series

Includes all 32 images shown below and on facing page. Item #36470

Series One (8 Images)

Item #36800

Series Two (8 Images)

Item #36420

Series Three (8 Images)

Item #36450
Visit ConwinOnline.com to see the full images and step-by-step projects.
PORTFOLIO SERIES 1 PORTFOLIO SERIES 2

PORTFOLIO BUILDERS

PORTFOLIO SERIES 3

Page 29

Portfolio Builders, continued

Series Four (8 Images)

CN36460

PORTFOLIO SERIES 4

Masterpiece Series Videos
THE DECORATORS COLLECTION 8-Piece Masterpiece Series
Boost Your Business, Learn from the Experts with Conwins
These exciting instructional videos feature the industry's top balloon artists sharing their secrets on everything from the latest decorating techniques to business management and marketing skills.
Get the entire Masterpiece Series collection as a complete set and save! Collection includes eight tapes (titles listed below) ranging from 90-120 minutes each. Item #32800

INDIVIDUAL TITLES:

Beginners Guide to Decorating with Balloons with Crystal Narramore, cba Classic Dcor with Ideas Galore! with Jan Iiams, cba & Linda Bruce, cba Themes and Dreams with Christopher Horne, cba Bridal Fairs & Beyond with Crystal Narramore, cba & Linda Bruce, cba
Beautiful Balloon Weddings with Crystal Narramore, cba & Linda Bruce, cba Wedding Workshop in a Box with Christopher Horne, cba The Art of Balloon Canopies with Linda Bruce, cba Selling the Magic! with Jan Iiams & Linda Bruce, cba

MASTERPIECE VIDEOS

Masterpiece Series: THE WEDDING EDITION
This inspiring collection of four videos features the innovative work of Jan Iiams and Sue MarstonWeston, two of the industrys leading design experts. Jan and Sue will show you how to create beautiful and profitable wedding decor your customers will love. Each tape approx. 60 minutes. Item #32890

THE WEDDING EDITION INCLUDES THE FOLLOWING FOUR VIDEOS:
Romantic Decor for Elegant Weddings by Jan Iiams The Art of Romantic Centrepiece Design by Jan Iiams Special Effects for Spectacular Weddings by Sue Marston-Weston Enchanting Extras by Sue Marston-Weston

Page 30

4:16 PM

Page 31

Quick Reference Product Index
Learn More about Conwins Products and Services

Visit ConwinOnline.com

Instruction Sheets Frequently Asked Questions Product Support Service Centre and More!
DIGITAL INFLATORS & ACCESSORIES

Dual Sizer Duplicator 2

Precision AIr
Helium/Nitrogen Quick Switch

Power Pack

60/40 Outlet
Hi-FLoat Outlet He/Hi-FLoat Adapter
Air Compressor Hook Up Add-On Foot Pedal
BASIC & SPECIALITY INFLATORS

Air Force 4 Air-Pro

Precision Plus

(Flex Tilt Model)

(Push Valve Model)

Conwin Classic

Flex Tilt With Gauge)

(Push Valve With Gauge)

EDUCATION & MARKETING
Masterpiece Series (8-Tape Set) The Wedding Edition

The Workstation

Hi-FloatPower Pump T-4-2 Adapter
10 Extension Hose Inflator

Snap-On Outlets

Economy Inflator
Portfolio Builder Full Collection Portfolio Builder (Series 1-4)

Deluxe Exploder Kit

Balloon Bulb Starter Kit

SPECIAL EFFECTS

Cylinder Safety Stand

Featured Online

Stand Work Center Test Gauge

Wall Bracket

Confetti Cannon Kit

Mega Cannon Kit

Insider Stuffing Tool
2-Wheel Hand Truck 4-Wheel Truck
Under Counter Remote System

Countertop Remote System

RIBBON & BALLOON ACCESSORIES

p25 p24

8-Spool Ribbon Dispenser
20-Spool Ribbon Dispenser
Neon Foam Wire Value Pack

2-Way Hand Pump

Grip Guide Balloon Template Scissor Keepers

Archline Pack

50# Dacron Archline 300yds 150# Dacron 200yds 50# Mono Archline 250yds
Grip-It Balloon Holder Adhesive Grip-Strips
reg /100pkg. super /100pkg.

Adhesive Grip Tabs

100pk 1,000pk
Balloon Tying Discs Utility Apron

Balloon Caddy

Cylinder Cover

Starter Kits

Page 32

Whats On Around Europe?

Check out Sues education programme throughout the UK and Europe by simply clicking on the International Balloon Calendar, including events such as:
Conwin Portfolio Play Days Conwin Road Shows 1 Day Training Courses Plus, Conwin supports and attends many balloon conventions and events across Europe every year. Visit our Online International Education Calendar to see a complete listing with links to event websites.
Keep in touch with the latest International Education Programmes by visiting Conwins Balloon Education Centre. Take advantage of the Information Centres articles and designer decorations to keep you informed and ahead of your competition!

the om fr rn ea L

WOR LDWIDE

ERTS! XP E

Keep up to date at www.ConwinOnline.com
Learn how to make the designs in our catalogue with step-by-step instructions from Conwins Design Team!
Step-By-Step Projects Get The Latest Tools and Much More!
Balloon Design Galleries Seasonal Designs Spotlight Balloon Artists
For details of your nearest Conwin Distributor please contact Conwin Europe (+44) P.O. Box 538, Great Missenden, HP16 0ZU, UK
Conwin, Inc. Corporate Headquarters: 4510 Sperry Street Los Angeles, CA 90039 USA (818) 246-9233 USA (818) 246-6862 FAX
P R O F E S S I O N A L S

CHOICE

Note: Prices printed in the catalogue are subject to change without notice.