High-Pressure Test Gauge Instructions
1. Hand-tight connect the Pressure Test Gauge to the cylinder. 2. Verify the bleed valve is closed. Turn T-bar lever clockwise to close. 3. Slowly open the cylinder valve. When the gauge needle stops moving, read the cylinder contents on the pressure gauge. Close the cylinder valve.

Bleed valve

4. Close the cylinder valve and open the bleed to release the pressure from the test gauge. Close the bleed valve and remove the pressure gauge from the cylinder.

Service & Warranty

For assistance with service & repair issues, or for warranty information, please visit ConwinOnline.com, or call (818)246.9233

Designs

Galleries

.and more!

Projects

Online

Conwins Masterpiece Series Videos
These exciting instructional videos feature the industry's top balloon artists sharing their secrets of the trade on everything from the latest decorating techniques to business management and marketing skills. Visit ConwinOnline.com to see our complete line of educational videos.

04102006

Visit www.ConwinOnline.com today!

Conwin Safety Products

2 and 4-Wheel Cylinder Hand Trucks
Designed expressly to support and transport helium cylinders. Industrial strength, powder-coated, reinforced steel frame features large ball-bearing wheels for ease in transportation.

Cylinder Safety Stand

A must for safety in the shop or on the job! Conwins Cylinder Safety Stand features a flat baseplate that provides greater stability. Two adjustable Velcro safety belts secure all size cylinders. Conwin # 30120
Add-On Workbench for 4 Wheel Hand Truck
Create a large, convenient workspace with Conwins Add-On Workbench for the 4-Wheel Hand Truck. The frame features a rack to hang Conwins Balloon Caddy and 8-Spool Ribbon Dispenser. Conwin # 30220 Remote Helium Set-Up Counter-Top Outlet Conwins Remote Helium Set-Up keeps helium out of sight in the backroom or basement providing a clean and professional store appearance. CounterTop Helium Outlet can be mounted at any convenient area.
Visit www.ConwinOnline.com to see Conwins full line of safety equipment and inflators

Transfill Manifold Instruction Sheet
Important Safety Guidelines
1. Never ll a cylinder without permission of the owner. 2. Before lling a cylinder visually inspect the cylinder to verify it is in good condition. Do not ll the cylinder if there are dents, deep scratches, evidence of being in the presence of a re, signs of rust, or if the pressure valve is damaged in any way. 3. Verify the cylinder has been hydrostatically tested within the last 5 years. The hydrostatic test date will be stamped in the crown of the cylinder. The numbers will be in this order: Month/Test Facility ID /Year. For example, a cylinder tested in April 2001 will have a stamp that looks like this: B8 73
If the cylinder test date is over ve years, do not ll the cylinder. Out-of-date cylinders must be sent to an authorized hydrotest company for testing.
Department of Transportation Regulations

DOT Label

1. Make sure the cylinder has a DOT Helium Label. All cylinders must be identified with a Department of Transportation label. 2. A Gas Transportation Document must be in plain view in driver's compartment while full or partially filled cylinders are being transported. Visit http://www.ConwinOnline.com to download a sample Gas Transportation Document. 3. For additional safety guidelines and regulations, visit the National Department of Transportation's website at http://hazmat.DOT.gov

Filling Instructions

Pressure gauge Handtight connection 1. After reviewing the safety guidelines above, handtight connect the Transfill Manifold with the pressure gauge next to the master cylinder and the bleed valve next to the cylinder you are filling. Make sure the bleed valve is closed - turn the valve clockwise to close. 2. Verify the maximum pressure rating of the small cylinder. The maximum pressure is stamped in the crown of the cylinder. This is the maximum amount of pressure to transfill into the cylinder. The stamp will appear like this: DOT 3AL 1800 The last number (in this case 1800) indicates the maximum pressure rating. 3. Fully open the valve on the small cylinder. If there is any pressure in the cylinder it will register on the gauge. This will be the starting pressure. Slowly, open the valve on the large cylinder. Watch the pressure increase on the gauge. When the pressure reaches 1800 PSI, or the maximum rating, close the valve on the large cylinder then close the valve on the small cylinder. 4. After both cylinder valves are closed, open the pressure bleed valve and release the pressure from the transfill manifold and remove the small cylinder from the filling hose. Close the pressure bleed valve.

Master cylinder

Bleed valve
Cylinder to be lled DOT label

Related Safety Products

4-Wheel Hand Truck Cylinder Safety Stand
Versatile and sturdy, Conwins 4-Wheel Hand Truck a rear wheel carriage with extended back wheels that provide maximum stability and locks into place for easy transportation. Additional features include heavy-duty wheels and two-position belt holders.
A must for safety in the shop or on the job! Conwins Cylinder Safety Stand features a at baseplate that provides greater stability. Two adjustable Velcro safety belts secure all size cylinders.
Add-On Workbench for 4W Hand Truck
Create a large, convenient workspace with Conwins AddOn Workbench for the 4-Wheel Hand Truck. The frame is designed to transport SDS grids and features a rack on which to hang Conwins Balloon Caddy and 8-Spool Ribbon Dispenser.

High-Pressure Test Gauge

Stop guessing how much helium you have left in your tank! With the High-Pressure Test Gauge, you can know for sure. The test gauge features a bleed valve, rubber guard and is glycerinelled to withstand impact.

Remote Helium Set-Up

Cylinder Safety Wall Bracket
Counter-Top Helium Outlet
Conwins Remote Helium Set-Up keeps your helium out of sight in the backroom or basement providing a clean and professional store appearance. CounterTop Helium Outlet can be mounted at any convenient area.

An economical solution in any work area. Mounts to the wall and secures any cylinder with a Velcro saefty belt. Conwin # 30100

Service & Warranty

For assistance with service & repair issues, or for warranty information, please visit ConwinOnline.com, or call (818)246.9233

Designs

Galleries

.and more!

Projects

Online

Conwins Masterpiece Series Videos
These exciting instructional videos feature the industry's top balloon artists sharing their secrets of the trade on everything from the latest decorating techniques to business management and marketing skills. Visit ConwinOnline.com to see our complete line of educational videos.

04042006

Visit www.ConwinOnline.com today!