Transfill Manifold Instruction Sheet
Important Safety Guidelines
1. Never ll a cylinder without permission of the owner. 2. Before lling a cylinder visually inspect the cylinder to verify it is in good condition. Do not ll the cylinder if there are dents, deep scratches, evidence of being in the presence of a re, signs of rust, or if the pressure valve is damaged in any way. 3. Verify the cylinder has been hydrostatically tested within the last 5 years. The hydrostatic test date will be stamped in the crown of the cylinder. The numbers will be in this order: Month/Test Facility ID /Year. For example, a cylinder tested in April 2001 will have a stamp that looks like this: B8 73
If the cylinder test date is over ve years, do not ll the cylinder. Out-of-date cylinders must be sent to an authorized hydrotest company for testing.
Department of Transportation Regulations

DOT Label

1. Make sure the cylinder has a DOT Helium Label. All cylinders must be identified with a Department of Transportation label. 2. A Gas Transportation Document must be in plain view in driver's compartment while full or partially filled cylinders are being transported. Visit http://www.ConwinOnline.com to download a sample Gas Transportation Document. 3. For additional safety guidelines and regulations, visit the National Department of Transportation's website at http://hazmat.DOT.gov

Filling Instructions

Pressure gauge Handtight connection 1. After reviewing the safety guidelines above, handtight connect the Transfill Manifold with the pressure gauge next to the master cylinder and the bleed valve next to the cylinder you are filling. Make sure the bleed valve is closed - turn the valve clockwise to close. 2. Verify the maximum pressure rating of the small cylinder. The maximum pressure is stamped in the crown of the cylinder. This is the maximum amount of pressure to transfill into the cylinder. The stamp will appear like this: DOT 3AL 1800 The last number (in this case 1800) indicates the maximum pressure rating. 3. Fully open the valve on the small cylinder. If there is any pressure in the cylinder it will register on the gauge. This will be the starting pressure. Slowly, open the valve on the large cylinder. Watch the pressure increase on the gauge. When the pressure reaches 1800 PSI, or the maximum rating, close the valve on the large cylinder then close the valve on the small cylinder. 4. After both cylinder valves are closed, open the pressure bleed valve and release the pressure from the transfill manifold and remove the small cylinder from the filling hose. Close the pressure bleed valve.

Master cylinder

Bleed valve
Cylinder to be lled DOT label

Related Safety Products

4-Wheel Hand Truck Cylinder Safety Stand
Versatile and sturdy, Conwins 4-Wheel Hand Truck a rear wheel carriage with extended back wheels that provide maximum stability and locks into place for easy transportation. Additional features include heavy-duty wheels and two-position belt holders.
A must for safety in the shop or on the job! Conwins Cylinder Safety Stand features a at baseplate that provides greater stability. Two adjustable Velcro safety belts secure all size cylinders.
Add-On Workbench for 4W Hand Truck
Create a large, convenient workspace with Conwins AddOn Workbench for the 4-Wheel Hand Truck. The frame is designed to transport SDS grids and features a rack on which to hang Conwins Balloon Caddy and 8-Spool Ribbon Dispenser.

High-Pressure Test Gauge

Stop guessing how much helium you have left in your tank! With the High-Pressure Test Gauge, you can know for sure. The test gauge features a bleed valve, rubber guard and is glycerinelled to withstand impact.

Remote Helium Set-Up

Cylinder Safety Wall Bracket
Counter-Top Helium Outlet
Conwins Remote Helium Set-Up keeps your helium out of sight in the backroom or basement providing a clean and professional store appearance. CounterTop Helium Outlet can be mounted at any convenient area.
An economical solution in any work area. Mounts to the wall and secures any cylinder with a Velcro saefty belt. Conwin # 30100

Service & Warranty

For assistance with service & repair issues, or for warranty information, please visit ConwinOnline.com, or call (818)246.9233

Designs

Galleries

.and more!

Projects

Online

Conwins Masterpiece Series Videos
These exciting instructional videos feature the industry's top balloon artists sharing their secrets of the trade on everything from the latest decorating techniques to business management and marketing skills. Visit ConwinOnline.com to see our complete line of educational videos.

04042006

Visit www.ConwinOnline.com today!

Worldwide the Professionals Choice for Quality Balloon Equipment

The Conwin Advantage

State-of-the-Art Engineering
Ongoing research and product development take top priority at Conwin. From the digital Dual Split-Second Sizer to pneumatic, non-pyrotechnic Balloon Exploders, Conwins well engineered products provide balloon decorators with the competitive edge. Our customers can rely on us for new and innovative products, like the Balloon Bulbs and the Confetti Cannon. This commitment has been the key to our success.

Balloon Inflators

60/40 HELIUM/AIR INFLATOR
Inflate 16" and larger balloons with a mix of 60% helium and 40% air. Save 40% on your helium costs! Item # 81700

CLASSIC INFLATORS

Conwins Lifetime Warranty
Conwins Classic Inflators inflate both latex and foil balloons. Available with the Soft-Touch Push Valve or Flex-Tilt Valve (pictured left). B Re Soft-Touch Push Valve (w/ gauge) Item # 81200 Soft-Touch Push Valve (no gauge) Item # 81300 Flex Tilt Valve (w/ gauge) Item # 81400 Flex Tilt Valve (no gauge) Item # 81500
Conwin products are backed by a lifetime warranty for material defects and product workmanship. Visit our Online Service Center for complete details. Here youll find helpful trouble-shooting advice and answers to frequently asked questions. Working directly with our knowledgeable service team youll be assured your product is properly and quickly serviced.

PRECISION PLUS INFLATOR

The #1 choice for balloon professionals, the Precision Plus lets you inflate foil balloons automatically to the perfect pressure and size. Costly foil balloon breakage is eliminated and maximum flying time is assured. The foil inflating outlet points downward to allow for fast one-hand inflation of valved foil balloons. The latex balloon filling outlet is available with a fast-flow push valve or a flex-tilt style outlet for manual inflation of latex balloons. The Soft-Touch Push Valve Outlet features an extension tip to fill 5" and smaller balloons.

BEST S

10FT EXTENSION HOSE INFLATOR

#1LLER E

B D Re R
The 10ft. Extension Hose Inflators versatile quickdisconnect fitting lets you easily change the hose outlet to meet the specific need of any job. B D R Item # 81600 (Inflator Only) Item # 82700 (Inflator and all Four Outlets, A-D)
Soft-Touch Push Valve Model

Flex-Tilt Valve Model

Item # 83000

Item # 83100

Tilt Valve Option
Benefits of the Soft-Touch Push Valve Model
Combines the benefits of the fast flow of a traditional push valve with the soft-touch control of a flex valve. Includes versatile extension tip for use with a variety of balloons.
Includes: Latex Outlet Ribbon Cutter Auto-Fill Foil Outlet Disc Tying Post Pressure Gauge Hand-Tight Connection

A Tilt Valve Outlet

Item # 36510 C Auto-Fill Foil Outlet Item # 36520
B 60/40 Helium/Air Outlet

Item # 36530

D Trigger Valve

Item # 36960

ECONOMY INFLATOR
The extremely durable Economy Inflator is great for rental cylinders. Flex Tilt Valve allows user to inflate foil and latex balloons. R Economy (w/ gauge) Item # 81101 Economy (no gauge) Item # 81100
NEVER Pop a Foil Balloon Again!

DUAL SPEED INFLATOR

5" Latex Balloons Entertainer Balloons Foil Balloons Valved Latex
Features two high-flow outlets for fast simultaneous inflation. Inflation outlets are positioned to insure maximum stability with multiple workers. D Item # 82801

SMART INFLATOR

The simplicity of the SMART Inflator makes inflating balloons easy for both the skilled and non-skilled employee. Designed exclusively for retail settings, the heliumpowered, non-electric SMART Inflator is preset to inflate 11" latex balloons and all size foils to the proper pressure and size, eliminating costly balloon breakage. R Item # 52618

TRIPLE SPEED INFLATOR

Features three high-flow outlets for fast simultaneous inflation. Inflation outlets are positioned to insure maximum stability with multiple workers. D Item # 82901

How it Works

Preset unit automatically inflates 11-inch latex balloons Automatically inflates foil balloons to proper pressure and size. Works on all sizes and shapes.

THE WORKSTATION

Countertop inflator with supply hose enables cylinder to be placed up to 6 feet away. Ideal for creating a safe and efficient balloon center. Features the new SoftTouch Push Valve for inflation of latex and separate outlet that automatically fills foils. R Item # 83400
An Exclusive Conwin Safety Feature - The Flo-Loc

2 ConwinOnline.com

User Recommendation:
B eginner D ecorator Re ntal R

etail/ Florists

All Conwins Basic and Specialty Inflators include an emergency helium shut-off feature that is activated if the balloon inflator is damaged while under pressure.
User Recommendation: B eginner D ecorator

Re ntal

Air Inflators

PRECISION AIR

The Precision Air automatically sizes air-filled latex balloons without the use of heavy cylinders, noisy air compressors, or time-consuming templates. Electrical unit provides digital timing to accurately size two air-filled balloons simultaneously at the touch of the foot pedal control. Inflates 5"-24" round latex balloons and specialty latex balloons, 2" in diameter and larger. A How it Works Item # 83501

Digital Inflators

The Dual Split-Second Sizer lets the user easily set and adjust the inflation cycle time in tenths of a second. Precisely inflate one single balloon, two identically sized balloons, or two differently sized balloons. Electric inflator requires a helium or nitrogen cylinder, or an air compressor. The latest model includes 2 Sound Reduction (SR) outlets that reduce inflation sound up to 10 decibels. Item # 84501 H N A Includes: Double Bubble Outlet Carrying Case Manual Override Outlet Primary and Second Auto-Fill Foil Outlet Foot Pedal Stage Regulators 6ft Powercord 2 SR Outlets

DUAL SPLIT-SECOND SIZER

Includes: Foot Pedal 6ft Powercord Carrying Case Recommended for: Air-Filled Balloon Arches, Columns, Garlands, & Sculptures Balloon Walls and Murals Balloon Drops
Outlets have extension tips to inflate 5" and specialty latex balloons.
Remove the extension tips to inflate 9" and larger balloons.
Inflate 2 balloons to the same size.
Inflate 2 balloons to different sizes.
Inflate a single balloon.

Inflates Double Bubbles.

The ULTIMATE Tool for Decorators!

Upgrade your model with Sound Reduction (SR) Outlets For all digital Dual Sizer and Duplicator 2 models Item # 10391

AIR-PRO

Recommended for: Helium-Filled Balloon Arches, Columns, and Garlands Balloon Bouquets, Deliveries, Centerpieces, and Retail Sales Foil Balloon Sculptures
Balloon Walls and Murals* Air-Filled Balloon Arches, Columns, Garlands and Sculptures*
* with Nitrogen Cylinder or Air Compressor
The Air-Pro quickly and easily inflates all size round and non-round balloons, by pressing down on the Push Valve Outlet. The filling-outlet features an extension tip for inflating small latex balloons and all size foils. The powerful Air-Pro motor runs only during the inflation cycle making it an ideal inflator for retail settings and professional balloon decorators. A Item # 86500

DUPLICATOR 2

Recommended for: Air-Filled Balloon Arches, Columns, and Garlands Air-Filled Balloons Sculptures Balloon Walls and Murals
Centerpieces Inflating Retail Balloon Samples Balloon Drops
The Air Force 4 is unmatched for speed and efficiency. The powerful motor and turbo air intakes enable fast, simultaneous inflation on four outlets. Unit can be foot-pedal controlled or set on continual ON mode for mass inflation of latex balloons. When working on a tight deadline, the Air Force 4 is the professionals choice to get the job done. Item # 82300 A

AIR FORCE 4

The ULTIMATE Tool for Retail Balloon Centers!
Countertop inflator automatically inflates and sizes latex balloons at the touch of a foot pedal. Includes a separate outlet for automatically inflating foil balloons, eliminating costly balloon breakage. The Duplicator 2 is an essential tool for decorators and store owners alike. Electric inflator requires a helium or nitrogen cylinder, or an air compressor. The latest model includes 1 Sound Reduction (SR) outlet that reduces inflation sound up to 10 decibels. Item # 84200 H N A Includes: How it Works 1 Sound Reduction Outlet 6ft Powercord Auto-Fill Foil Outlet Foot Pedal Primary and Second Stage Regulators Recommended for: Balloon Bouquets, Centerpieces, and Deliveries The Duplicator 2 automatically Balloon Retail Sales inflates all size latex and foil balloons
Includes: Large Balloon Foot Pedal Inflation Hose 6ft Powercord 3 Extension Tips Recommended for: Air-filled Balloon Arches, Columns, and Garlands Air-Filled Balloons Sculptures Balloon Walls and Murals Balloon Drops The Air Force 4 Insider Tool Item # 36920 (See page 6 for details)

Versatile Accessories for the Dual Sizer & Duplicator 2

for A MUST s r Decorato

Helium/Nitrogen Quick Switch
Snaps on to the back of your Dual Sizer or Duplicator with a quick-disconnect fitting. Change from Helium to Nitrogen with the flip of a switch. Also works with an air compressor. Includes hose and primary regulator for a nitrogen cylinder.
Inflate 4 balloons simultaneously.
Inflate large balloons FAST with the Large Balloon Inflation Hose.

60/40 Helium/Air Outlet

Hi-Float Outlet

Item # 36350

Inflate 16" and larger balloons with a mix of 60% helium and 40% air. Save 40% on your helium costs.
Inflate balloons neck up, eliminating Hi-Float from entering your inflator.

Air Compressor Hook-Up

Item # 36320

ConwinOnline.com

For use with: H elium

N itrogen

A ir (Self Contained)
A ir (Compressor Required)

Item # 36310

Work up to 12 feet away. Includes quick disconnect fittings and a filter that prevents foreign particles and moisture from entering your inflator.

Item # 36340

Special Effects
REMOTE CONTROL CONFETTI CANNON KIT
Easy to Charge! Easy to Rig! Easy to Fire!
The ultimate special effect for weddings, corporate events and parties. Designed for balloon decorators, the new Remote Controlled Cannon is powered by a small rechargeable cylinder using nitrogen or helium. Cannon can be rigged up to 90 feet away from the hand held detonator. Cannon Kit includes interchangeable barrels: a Standard Size Barrel for everyday venues, and a Mega Barrel for larger venues and outdoor events. Cannon can fire confetti or streamers.

Safety Equipment

2-WHEEL & 4-WHEEL HAND TRUCKS
Conwins cylinder hand trucks are designed exclusively for the balloon industry to support and transport all sizes of helium cylinders. The rounded back support holds the cylinder in place during transport. Features heavy-duty wheels and Velcro safety belt. 2-Wheel Hand Truck Item # 49820 4-Wheel Hand Truck Item # 49825

DELUXE BALLOON BULB SET

Balloon Bulbs are perfect for column toppers or can be suspended from the ceiling to create a spectacular effect. Each long-life, lowtemp fluorescent Balloon Bulb illuminates up to 8,000 hours.
Now Includes 2 Interchangeable Barrels
Remote Control Activated!
Includes: Two Balloon Bulb Units, 2 fluorescent bulbs,
Balloon Stretching Tool, Clamp, Carrying Case (Holds up to 4 units) Item # 86700

CYLINDER SAFETY STAND

Conwins Cylinder Safety Stand features a flat base plate that provides greater stability. Two adjustable Velcro safety belts secure all size cylinders. Item # 30120

2-Wheel Hand Truck

Add-On Balloon Bulbs
Kit Includes: 1 Confetti Cannon, 1 Standard Size Barrel, 1 Mega Barrel, 2 Hand Held Detonators, Receiver, Battery Charger, Helium/Nitrogen Recharge Hose and Soft Pack Carrying Case. Item # 85401 (Confetti Cannon Kit) Item # 10446 (Conversion Kit-Includes: 2 Hand Held Detonators, 1 Receiver, and 1 Battery Charger)
(Includes set of 2 Balloon Bulb Units and 2 fluorescent bulbs to add to Deluxe Set above) Item # 86800
for A MUST rs e all Cylind
CYLINDER SAFETY WALL BRACKET
An economical solution to providing safety in the workplace, the Cylinder Safety Wall Bracket secures all size cylinders with a reinforced Velcro safety belt. Bracket is easily installed with mounting screws and anchors supplied. Item # 30100

4-Wheel Hand Truck

DELUXE BALLOON EXPLODER KIT
Conwins Pneumatic Balloon Exploders are safe, easy to use, nonelectric and non-pyrotechnic. Powered by helium or nitrogen gas, they are perfect for exploding balloon walls and for special effects created with exploding confetti-filled balloons. Large exploding balloons are also great as balloon column toppers and over dance floors!
INSIDER BALLOON STUFFING TOOL

Option 1

Insider Balloon Stuffing Tool
Designed for use with Conwins Dual Sizer or Duplicator 2. Item # 85900 Includes: Balloon Holding Tool, Clamp, Air Hose, and Inflation Tool.

T-4-2 ADAPTER

Option 2
The Air Force 4 Insider Balloon Stuffing Tool
Exclusively for use with Conwins 2007 Air Force 4. Item #36920 Includes: Balloon Holding Tool, Clamp, Air Hose, and Inflation Tool.

Ideal for Rental Centers

ALUMINUM CYLINDERS
Enables two regulators to hook up to one cylinder. Attaches to a helium or nitrogen cylinder with a wrench-tight connection. Creates an instant double outlet off one cylinder. Item # 84800
Lightweight and suitable for Nitrogen and Helium. Sold empty.

A 27-Cubic Foot Cylinder

TRANSFILL MANIFOLD

Option 3

10-ft Extension Hose Inflator Set & Insider Set
Kit Includes: Compact Aluminum Cylinder with Charger, Exploder
Regulator, Detonator Box, 100ft Air Line, 6 Exploders, 6 Quick-Fit Tees, 6 Splices and Soft Pack Carrying Case. Item # 86201
Select this versatile option If you dont have a Dual Sizer, Duplicator 2 or Air Force 4. Item # 84900 Includes: 10-Foot Extension Hose Inflator , Snap-On Inflation Tool, Balloon Holding Tool, Clamp, and Air Hose.
Inflates: 50-11" Balloons Item # 60331 B 55-Cubic Foot Cylinder Inflates: 100-11" Balloons Item # 60351 C 110-Cubic Foot Cylinder Inflates: 200-11" Balloons Item # 60451 D 137-Cubic Foot Cylinder Inflates: 250-11" Balloons Item # 60371
Refilling your own small cylinder from a large cylinder is easy and safe with Conwins Transfill Manifold. Attaches with easy-to-use hand-tight connections. Only available in the U.S. Item # 87500

CYLINDER COVER

Fits large cylinders with drawstring top. Cover provides a clean and professional look in the shop or on the job. Item # 32000

Decorating Essentials

BALLOON CADDY

Regular Super

Balloon Caddy holds balloons and supplies right within your reach. Adjustable Velcro belt fits any size cylinder. Item # 32021

Artist Accessories

THE DESIGNER WORK BELT
Designed and field tested by Balloon Decorators and Twisters, this specialized work belt provides the ultimate in on-the-job efficiency. Special features include Velcro straps that efficiently hold up to 1000 entertainer balloons, easy-access pockets and an adjustable belt with quick-snap buckle. The durable Designer Work Belt is made out of heavy-duty nylon woven fabric with reinforced stitching. Item # 36120

ADHESIVE GRIP-TABS

BALLOON ARCHLINE
50 lb. Dacron Archline (300 yds.) Item # lb. Dacron Archline (200 yds.) Item # lb. Monofilament Archline (250 yds.) Item # 32170
Simply stick the Grip-Tabs to any clean surface and tie on the balloons. Ideal for use with centerpiece designs, exploding balloons, and displaying inflated retail balloon samples. Super Grip-Tabs are four times as large as standard Grip-Tabs. Super Grip-Tabs are great for securing big bouquets of balloons and can be used for lightweight rigging. Regular Grip-Tabs - 108 pk Super Grip-Tabs - 100 pk Item # 32081 Item # 36430

ADHESIVE GRIP-STRIPS

BALLOON TYING DISCS

Great for on-the-job decorating and point of purchase displays, the sturdy plastic strips have adhesive backing to position them to any clean surface. Item # 32070 (10 pk)
Increase your productivity by attaching ribbon and tying balloons in one easy motion. 100 pk Item # 32400 1,000 pk Item #32420

LLER BEST SE

CLIP-ON QUICK CUTTER
The Clip-On Quick Cutter is a great time saver for decorators to quickly cut ribbons & archline. Its a must for increasing your productivity. Item # 36940 (2 per pkg)

2-WAY HAND PUMP

Efficient double action pump inflates balloons with both a push and pull motion. Ideal for Balloon Twisters and Decorators. Item # 33220
The compact, free standing Ribbon Dispenser features a 16" x 16" quick cutter and is perfect for use in the shop or on the job. HEAVY WEIGHT SANDBAG Designed specifically for the balloon industry, the Heavy Weight Item # 32101 Sandbag features two independent pockets that can hold up to 25 lbs of sand or gravel, and features a 3/4" center grommet that easily fits 8-SPOOL over a base plate or riser. (Base Plate sold separately) RIBBON DISPENSER Item # 36099 Includes bracket to mount on the wall or on your cylinder LIGHT WEIGHT BASE PLATES Great for indoor and light weight balloon Item # 32121 dcor, the new 5-pound base plates feature a removable riser, designed to fit standard 1/2" electrical conduit. Recommend for use with Conwins new Heavy Weight Sand Bags. 16" x 16" Item # 37341
20-SPOOL RIBBON DISPENSER

CLIP-ON SCISSOR KEEPERS

Conveniently clips to your belt keeping scissors within reach. Eliminate wasted time spent looking for scissors while decorating on the job. The new 360 swivel clip features a retractable lead line, allowing a wide range of motion when working with scissors. Item # 36410 (4 per pkg)

CLIP-ON ARCHLINE PACK

DESIGNER BASE PLATES
Easily dispense archline with our convenient Archline Dispenser Pack. Holds two spools of archline, prevents line from free spinning. Clips on belt. (Archline sold on facing page). Item # 36050 The Utility Apron is a must for increasing efficiency while decorating on-thejob. Users can keep tools and supplies conveniently within hands reach. The Utility Apron is made out of heavyduty nylon woven fabric with reinforced stitching and features an adjustable belt with quick-snap buckle. Item # 36060

16" x 16"

Conwins 14-pound white base plates feature a rigging point for attaching archline, and a convenient carrying handle that holds 2 base plates and 2 risers. Riser is designed to fit standard 1/2" electrical conduit. Item # 37340

UTILITY APRON

Master Series DVDs

MASTER

INSTRUCTIONAL DVD SET

Portfolio Builders

Series 1 Series 5 Series 4 Series 3 Series 2
Pioneer Balloon Co. & CONWIN Inc. Proudly Present

BALLOON DECOR

SERIES

DVD Titles:

Volume I: Classic Balloon Decor Volume 2: Weddings Volume 3: Centerpieces & Arrangements

Set Includes:

3 DVDs with 15 Step-by-Step Designs 24 New 8.5 X 11 Portfolio Builders (Series 6, 7 & 8) printed on 8.5 X 11 heavy weight glossy stock. See the full series on facing page. Web Links

C T O R S

NORRIS

MARSTON-WESTON

MAYHEW

STEVEN

Get inspired & grow your business!
Balloon Decor Master Series DVD Set (Volume 1-3)
Learn a variety of new techniques and design tips from five of the balloon industrys top instructors. Jodie Norris, Dee White, and Sue Marston-Westonrenowned European designers showcase the latest trends in combining non-round balloons with classic balloon decor, while Linda Bruce and Steven Mayhewtwo innovative designers from the USAfeature a variety of best-selling arrangements. From fantasy flowers to balloon walls, each of the 15 step-by-step designs are clearly presented with easy to follow instructions. After mastering the new designs, youll be ready to make professional client presentations with the twenty-four Portfolio Builder images included inside. Available through Conwins and Qualatexs Distributor Network

Series 8 1/2 X 11

Heavy Weight Glossy Stock SERIES ONE Item #36800 SERIES TWO Item #36420 SERIES THREE Item #36450 SERIES FOUR Item #36460 SERIES FIVE Item #36930

8 Images per

Impress Your Clients A picture is worth a thousand words. Is your portfolio up to date on the latest? Set yourself apart from the competition with these quality, professional photographs.
Buy ALL 5 Series (40 Images) & Receive a FREE EASEL-BACK PRESENTATION BINDER Item # 36860
Includes: Binder with 4 Themed Category Dividers. (Portfolio Builders and Image Protectors sold separately.)

Portfolio Builder Series

Includes: Binder with four Category Dividers, 40 Portfolio Builder Images (Series 1-5) and 40 Image Protectors.
EASEL-BACK PRESENTATION BINDER Item # 36850