Reviews & Opinions
Independent and trusted. Read before buy Ctek Multi XS 3600!

Ctek Multi XS 3600

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Ctek Multi XS 3600, size: 311 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Ctek Multi XS 3600About Ctek Multi XS 3600
Here you can find all about Ctek Multi XS 3600 like manual and other informations. For example: review.

Ctek Multi XS 3600 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Ctek Multi XS 3600 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Ctek Multi XS 3600 photo ]

Video review

XS3600 battery charger by CTEK

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
Rockj 5:43am on Wednesday, October 6th, 2010 
Very happy with CTek Multi XS 3600 charger The Ctek XS 3600 Multi charger is perfect for keeping your car battery in top condition while your car is n...
fed0r@ 12:37am on Friday, July 30th, 2010 
CTEK - The best chargers in the world My Diesel Clio does a low mileage - mostly short local journeys to shops e.t.c. CTEK 3600 This is the best charger I have ever owned.
Roey 3:11pm on Thursday, May 20th, 2010 
Very happy with CTek Multi XS 3600 charger The Ctek XS 3600 Multi charger is perfect for keeping your car battery in top condition while your car is n...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

MULTIXS3600

Battery charger

For lead-acid batteries 1,2-120Ah
Users Manual and a guide to professional battery charging For Starter/Deep Cycle batteries

INTRODUCTION

Congratulations on your purchase of your new professional MULTIXS3600 Switch Mode Charger with Pulse Maintenance. MULTIXS3600 is a member of a family of professional chargers from CTEK Sweden AB. It represents the state-of-the-art technology for battery charging. A MULTIXS3600 will prolong the lifetime of your battery. Read this user manual and follow the instructions carefully before using the charger. The charger is designed for lead-acid batteries from 1,2-120Ah. Do not use the charger for any other purpose. Use safety glasses and turn your head away when connecting or disconnecting a battery. Battery acid is corosive. Rinse immediately with water if acid comes into contact with skin or eyes. Seek medical advice. Make sure that the cable is not being pinched or in contact with warm surfaces or sharp edges. While charging, a battery can emit explosive gases, so it is important to avoid sparks in the immediate area. Always provide for proper ventilation during charging. Avoid covering the charger. Make sure that the electrical cable does not come into contact with water. Never charge a frozen battery. Never charge a damaged battery. Do not place the charger on the battery while charging. The electrical connection must fulfil the national heavy current requirements. Check the cabling in the charger before use. Make sure there are no cracks in the cabling or in the protective covering. A charger with damaged cables may not be used. Always check that the charger has gone over to maintenance charging mode before leaving the charger unattended and connected for long periods. If the charger had not gone over to maintenance charging within 3 days, this is an indication of a problem. In this case the charger must be disconnected manually. All batteries fail sooner or later. A battery that fails during charging is normally taken care of by the chargers advanced control, but certain uncommon errors in the battery can still arise. Dont leave the battery charger unattended for a longer period of time. Only mount the charger on a flat surface. This equipment may not be used by children or by those who can not read and understand the manual if they are not supervised by a responsible person who can guarantee that the battery charger is being used in a safe manner. Store and use the battery charger out of the reach of children. Make sure that children do not play with the battery charger.

SAFETY

BATTERY TYPES AND SETTINGS
MULTIXS3600 can easily be configured to charge many different types of 12V lead-acid batteries; wet batteries, MF, AGM och for most GEL-batteries. The following recommendations should, however, only be seen as guidelines. When in doubt, always consult the battery manufacturer for further instructions. Settings are made by pressing the MODE-button and stepping forward by pressing the button one step at a time, releasing the button when the required mode is reached. Mode 14.4V/0.8A This mode is normally used for <14Ah batteries. Mode 14.4V/3.6A Normal setting for wet batteries, MF and for most GEL batteries. Mode 14.7V/3.6A This setting is recommended for batteries at temperatures below 5C. It is also recommended for many AGM batteries. This setting is not recommended for maintenance charging when the temperature at times exceeds +5C. In this case, the 14.4V/3.6A mode is recommended.
Charging batteries mounted in a vehicle: 1. The power cord should be disconnected before connecting or disconnecting the battery leads. 2. dentify the pole that is grounded (attached to the chassis). Ground is normally connected to the negative I terminal. 3. harging a negatively grounded battery. Connect the red wire to the positive pole of the battery and the black C cable to the vehicles chassis. Be careful not to connect the black cable in the vicinity of a fuel pipe or the battery. 4. harging a positively grounded battery. Connect the black wire to the negative pole of the battery and the red C cable to the vehicle's chassis. Be careful not to connect the red cable in the vicinity of a fuel pipe or the battery. Charging of a battery not connected to a vehicle: 1. The power cord should be disconnected before connecting or disconnecting the battery leads. 2. Connect the red wire to the positive pole of the battery and the black cable to the negative pole.

CHARGING

Connecting the provided cables with eyelet terminals: Make sure that the cable is not being pinched or in contact with warm surfaces or sharp edges. When the cable is mounted on the battery, it should not be connected to the charger. Connect the eyelet terminals to the battery's poles - the red cable to the positive pole and the black cable to the negative pole. After this, the quick contact can be connected. Reverse Polarity Protection If the battery cables are connected incorrectly, the reverse polarity protection will make sure that the charger and the battery are not damaged. In this case, the red warning lamp (0) will be lit. Start charging 1. et the proper charging mode for the battery by pushing the Mode button until the correct setting is lit. Choosing S settings for your battery is described under BATTERY TYPES AND SETTINGS. 2. hen you are sure the battery leads are correctly placed, connect the power cord to the power outlet to begin W charging. If the battery leads are wrongly connected, the pole-changing switch will ensure the battery and charger are not damaged. The fault indicator will light. In which case start from the beginning again. will now indicate charging or the maintenance lamp will indicate that the battery is 3. he charging lamp T fully charged. If the voltage drops the charger sends a pulse to the battery. The length of the pulse depends on how much the voltage has dropped. The charger can be connected for months. 4. f nothing happens: If the voltage indicator is lit but no other lamp is lit there could be a bad connection to the I battery or chassis or the battery could be faulty. Check the wall power outlet. If you experience problems: start with the sensitive connection between the battery clamps and the charger. 5. harging can be stopped at any time by disconnecting the supply cord or by setting the charger on Standby. C Always remove the power cord from the power outlet before disconnecting the battery leads from a battery in a vehicle. When you stop charging a battery in a vehicle, remove the cable from the chassis before removing the other cable. 6. If the charger lamp and the maintenance-charger lamp are flashing alternately, the reason for this is due to: An interruption during charging, due to a loose connection or because the battery has ceased to work. The battery has become sulphated. If the lamps flash for more than 30 minutes, this indicates that the battery is dead and needs to be replaced. If there is an interval of more than 10 seconds between the flashes, this indicates that the battery has a high self-discharge rate and may need to be replaced.

CHARGING PHASES

MULTIXS3600 operates in a four step fully automatic cycle IUoUp. It begins charging with an almost constant current (0.8A or 3.6A) until maximum voltage (14.4V or 14.7V) is reached. The charger changes mode at this point. It locks the voltage at maximum level and allows the current to drop. The MULTIXS3600 switches automatically to pulse maintenance charging when the current drops to 0.4A. The charging cycle restarts if the battery voltage drops to 12.9V.
Desulphation - Desulphation with pulsing for sulphated batteries. Bulk - Charging where 80% of the energy is returned. The charger delivers an almost constant current until the battery voltage reaches maximum level. Absorption - Charging up to almost 100%. The charge current falls and the voltage is kept constant at the maximum level. Pulse - Maintenance phase, where the charger delivers a pulse if the battery voltage drops. Charging varies between 95% and 100%. The battery receives a pulse when the voltage reduces. Keep the battery in good condition when not in use. The charger can be connected for months.
TEMPERATURE PROTECTION MAINTENANCE EQUIPMENT
MULTIXS3600 is protected from being overheated. The power will be reduced if the ambient temperature is raised. The charger is maintenance free. Note that disassembly of the charger is not permitted and will void the warranty. If the power cord is damaged, the charger must be left to the reseller for maintenance. The case can be cleaned with a soft damp cloth and mild cleanser. The charger should be disconnected from the power while cleaning. MULTIXS3600 is delivered with a set of battery leads with battery pole clamps and a set of battery leads with eyelet terminals.

WARRANTY

CTEK SWEDEN AB, Rostugnsvgen 3, VIKMANSHYTTAN, SWEDEN provides a limited warranty to the original purchaser of this product. This limited warranty is not transferable. The unit is warranted against defective workmanship or materials for 5 years from the date of purchase. The customer must return the product together with the original purchase receipt to the place of purchase. This warranty is void if the unit is handled carelessly, opened or repaired by anyone other than CTEK SWEDEN AB or its authorized representative. CTEK SWEDEN AB makes no warranty other than this limited warranty and expressly excludes any implied warranty including any warranty for consequential damages. This is the only expressed limited warranty and CTEK SWEDEN AB neither assumes nor authorizes anyone to assume or make any other obligation towards the product other than his limited warranty.

TECHNICAL SPECIFICATION

Model MULTI XS 3600 Voltage AC 220-240VAC, 50-60Hz Back current drain* < 1mA Voltage Charging Voltage Nominal: 12V 14.4V; 14.7V Ripple** Max 50mV rms, max 0.13A Current 0,8A; 3,6A Ambient Temperature 20C to + 50C, power is reduced automatically at increased ambient temperature. Cooling Natural convection. Charging cycle MULTIXS3600 is a multistage fully automatic charger Type of batteries types of 12V lead-acid batteries (Wet, MF, VRLA, AGM and GEL). All Battery Capacity 1.2120Ah Dimensions 165x61x38mm (L x W x H) Insulation IP65*** Weight 0.5 kg *) Back Current Drain is what the charger uses to drain the battery if the power cord is disconnected. **) Quality of the current and voltage are very important. High current ripple heats up the battery and makes the positive electrode age prematurely. High voltage ripple could harm other equipment connected to the battery. MULTIXS3600 produces a high quality current and voltage with very low ripple. ***) If the power connected is the flat European contact type, the battery charger has insulation class IP63, except in Switzerland where IP65 is valid.

MANUFACTURERS DECLARATION
CTEK SWEDEN AB, Rostugnsvgen 3, VIKMANSHYTTAN, SWEDEN. Declares under sole responsibility that the battery charger MULTIXS3600, to which this declaration relates is in conformity with the following LVD standards: EN60335-1, EN60335-2-29 according to the terms of directive 73/23/EEC with the addition of 93/68/ EEC. This product also is in agreement with the following EMC standards: EN55011, EN 61000-3-3, EN 61000-32, EN55014-1 and EN55014-2 according to the terms of directive 89/336/EEC with the addition of 92/31/EEC and 93/68/EEC. The charger comes in different models with different types of electrical plugs. The charger with the flat eurocontact is intended for Switzerland. VIKMANSHYTTAN, SWEDEN 2006-01-23 Brje Maleus, VD CTEK SWEDEN AB, Rostugnsvgen 70 VIKMANSHYTTAN, SWEDEN Fax: +30793 www.ctek.com

BULK CHARGING TIME

Battery size (Ah) 120 Mode
The table shows the length of time for bulk charging. Time (h) 27

 

Tags

D AIR MDB7600AWW DCR-TRV250E DUO MF-14 CAW7740N Mypal A639 ART TCS XRS9685 TX-36PB50 A60-S166 SDM-G96D LAV76630-W ML-2851ND ETS Device AT1935 415993 MX-305 MRF-200 Dual IV KDC-W3044G PB-G02 SRF-M80V RX-V670 P1000 Strav210 Hasbro Rook WD-13401TB HL-6050 CY-VMD9000U DMR-EH68 Galeo 6000 STR-DA3500ES Desktop S510 RSP-966 XM-2002GTW MW-30LZ10 RM318PU 42LG5500 Sl-610 W8400 MVX40 Compact 2 PNA 200S CMT-HX5BT UE40C6500 WA11RA 500SI Dobsonian XT8 SVK31TS Kxtg6411GR GN 4170 L310W BD390 Singer 52 Futaba 6EXP LN32C450e1D Samsung 710N Perfection 1270 15LC1R LX700 PSS-140 EWF861 7700 PRO SN-700 107624-02 Temporis 700 Mitsubishi G15B Automate AM1 FL1001 Lexmark E323 LE22A455 PC-1401 1402 C500N I PMX Feeder M3540PD Pentax Sfxn Samsung C450 SI-R917A SA-205HD YP-U1XB Nokia S60 PSR-37 Impression 3 SDC-368 FX-350ES SX20 IS A75-S211 Recon Z1420 RTS II - 4000 Porter Flex Digital Review CDX-496 MA560 930MP TH-S66 Switch

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101