MODEL E-4500 D 700G N/A MKLF2423 N/A GN9350E E-4100-C 4ZJ32 FPD1930 LABEL POINT N/A E-4500 D 20506 HE 2727 700G 19IT E-4500 D VS10697 WD5000H1U-00 E-4100-C FPD1730 DC-4000 M5183 E4100 P4/2.4 M12 ICR-B220 FPD1730 E-4100-C E-4500D E178FP FPD1765 7700DN K6-J570 E-4500D 6552-63N FPD-1930
COST $735.00 $210.00 $39.00 $482.22 $179.00 $534.95 $280.02 $892.62 $102.24 $598.00 $65.59 $117.00 $534.95 $735.00 $1,000.00 $489.20 $210.00 $999.99 $735.00 $431.98 $109.99 $892.62 $400.00 $249.31 $2,114.00 $1,078.38 $94.95 $219.99 $400.00 $892.62 $604.25 $161.00 $400.00 $5,519.00 $397.95 $604.25 $139.75 $615.50
BARCODE S0000030881 C0000030925 S0000020344 S10416
DESCRIPTION MACHINE SCORING AND HARD DRIVE EXTERNAL COMPUTER LAPTOP MONITOR FLATSCREEN 1 INTUOS3 12X19 - Over COMPUTER PERSONAL 2. MONITOR FLAT SCREEN COMPUTER LAPTOP DVD MOVIE WRITER MONITOR COLOR DISK DRIVE EXTERNAL SCANNER SCANNER COLOR SCANNER, FILM PRINTER, PHOTO MONITOR FLAT SCREEN MONITOR FLAT SCREEN COMPUTER GATEWAY E-4 COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN SCANNER COLOR COMPUTER PERSONAL EPRINTER COLOR DESKJE SCANNER DIGITAL PUBL FAX MACHINE SCANNER BARCODE MONITOR FLAT SCREEN COMPUTER GATEWAY E-4 LABELER, BRTPT1960, MONITOR FLAT SCREEN COMPUTER GATEWAY E-4 OPENER PRE1616 AUTOM STAPLER BOS02210 ELE HOLE PUNCH GBC770427 FAN LAKEWOOD 12" 3 S MONITOR 19"SYNCMASTE COMPUTER GATEWAY E-4 CALCULATOR DESK
MANUF. ADVANCED DOCUME WESTERN DIGITAL DELL GATEWAY WACOM GATEWAY GATEWAY DELL HEWLETT PACKARD GATEWAY IOMEGA HORIZON ULTRA HEWLETT PACKARD NIKON CANNON GATEWAY GATEWAY GATEWAY GATEWAY GATEWAY HEWLETT PACKARD GATEWAY HEWLETT PACKARD MINOLTA XEROX SYMBOL TECH INC GATEWAY GATEWAY BROTHER GATEWAY GATEWAY MARTIN-YALE BOSTICH GBC LAKEWOOD SAMSUNG GATEWAY TEXAS INST.
MODEL HS-100 WD5000E032 PP01L FDP1950 PTZ930 E-4100-C FPD1730 PP02X DC-4000 EV700 ZIP 100 PLUS HORIZON C2520B COOLSCAN 5000 ED I990 FPD1730 FPD1730 E-4100-C E-4100-C FPD1730 C7710A E-4000 P4/1.8 6940DT PS7000 WORKCENTRE PRO 555 LS40061-I100 700G E-4500D BRTPT1960 FPD1730 E-4100-C 3230 N/A 191T E-4100-C TI 5040 II
COST $483.00 $202.93 $2,115.00 $397.00 $449.00 $892.62 $400.00 $3,500.00 $249.31 $500.00 $195.00 $15,609.00 $1,029.00 $940.98 $410.98 $400.00 $400.00 $892.62 $892.62 $400.00 $669.00 $950.00 $134.00 $12,116.00 $850.00 $674.99 $210.00 $604.25 $148.97 $400.00 $892.62 $89.99 $42.99 $113.99 $57.75 $880.00 $892.62 $74.14
BARCODE 0000021235 S0000034772 S0000030596 0000034612
DESCRIPTION COMPUTER GATEWAY E-4 PRINTER HP LASERJET LIMI TIMER, D'SAN MONITOR FLAT SCREEN COMPUTER LAPTOP FAX MACHINE XTC3 MONITOR FLAT SCREEN COMPUTER GATEWAY E-4 COMPUTER GATEWAY E-4 MONITOR GATEWAY 17" MONITOR, 17" FLAT PA COMPUTER, 2 GB DUO C COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN COMPUTER, 2 GB DUO C COMPUTER GATEWAY E-4 MONITOR GATEWAY 17" MONITOR FLAT SCREEN COMPUTER PERSONAL MONITOR FLAT PANEL 2 MONITOR, 17" FLAT PA COMPUTER PERSONAL PRINTER COLOR DESKJE MONITOR FLAT SCREEN COMPUTER PERSONAL 2. SHREDDER, CROSS CUT MONITOR GATEWAY 17" COMPUTER, 2 GB DUO C FAN OSCILLATING 12" COMPUTER GATEWAY E-4 HOLE PUNCH, ELECTRON MONITOR 22" FLAT PAN COMPUTER GATEWAY E-4 HEADSET, CORDLESS LABELER, ELECTRONIC LABEL MAKER, DYMO MONITOR GATEWAY 17" COMPUTER PERSONAL

BARCODE 0000029389 S0000021945 S10621 SS10622 S12757 C3879 S10625 C3880 S10301 C3864 S10628 SS0000019670
DESCRIPTION CAMERA DIGITAL COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN COMPUTER GATEWAY E-4 MONITOR, 17" FLAT PA CARD SCAN + 300 COMPUTER GATEWAY E-4 MONITOR, DELL 17" E1 MONITOR, DELL 17" E1 COMPUTER PERSONAL MONITOR GATEWAY 17" COMPUTER GATEWAY E-4 MONITOR GATEWAY 17" COMPUTER GATEWAY E-4 PAPER DRILL PAPER CUTTER W/STAND CUTTER,POWER KNIFE,H BINDING MACHINE FAX MACHINE BINDER ELECTRIC VELL PUNCH PAPER ELECTRIC TABLE CONSOLE LAMINATOR DUPLICATING MACHINE BINDING SYSTEM CALCULATOR COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN FAX MACHINE FAX COPIER TYPEWRITER, TYPE 678 COMPUTER LAPTOP MONITOR FLAT SCREEN CALCULATOR, DESK TOP COMPUTER PERSONAL 2. LABEL WRITER/PRINTER MONITOR GATEWAY 17" SHARPNER PENCIL ELE
MANUF. SONY GATEWAY GATEWAY GATEWAY DELL COREX GATEWAY DELL DELL HEWLETT PACKARD GATEWAY GATEWAY GATEWAY GATEWAY CHALLENGE TRIUMPH CHALLENGE IBICO XEROX GEN BINDING GEN BINDING PITNEY BOWES THERMAL ROLL XEROX IBICO TEXAS INSTRUMEN GATEWAY GATEWAY XEROX XEROX IBM DELL GATEWAY TEXAS INSTRUMEN GATEWAY N/A GATEWAY BOSTON
MODEL CD-300 E-4500 D 700G E-4500D E178FP BCR030P E-4500 D E178FP E178FP DC7800 FPD1765 E-4100-C FPD1765 E-4500D CENTURY 3600 HAE 19269 DCW111PM-GRIII-25F NP135 LR-53815-1 BA-45 E-4100-C FPD1730 WORKCENTRE PRO WHEELWRITER D600 FPD1730 TI-5030 E-4100-C N/A FPD1765 19
COST $899.00 $735.00 $210.00 $604.25 $161.00 $299.00 $735.00 $145.50 $145.50 $559.37 $400.00 $892.62 $400.00 $719.00 $3,174.70 $933.67 $3,995.00 $230.55 $1,860.00 $5,563.94 $1,751.75 $16,319.00 $1,299.00 $224,960.00 $1,144.80 $57.00 $892.62 $400.00 $850.00 $1,675.00 $484.79 $2,122.32 $400.00 $30.45 $892.62 $239.00 $400.00 $26.99
BARCODE S12604 S0000016217 S15693 S0000024926
DESCRIPTION TIME AND DATE RECORD Workstation for Buil TYPEWRITER, TYPE 678 LETTER OPENER COMPAC FLAT SCREEN MONITOR AIR BRUSH, SET MONITOR FLAT SCREEN HARD DRIVE 500GB WES COMPUTER PERSONAL 2. DRIVE EXTERNAL CD-RW COMPUTER PERSONAL GA DELL 19" FLAT PANEL FAX MACHINE PRINTER SAMSUNG PRINTER COLOR DESKJE COMPUTER PERSONAL 2. MONITOR FLAT SCREEN PRINTER COLOR LASERJ MONITOR GATEWAY 17" COMPUTER PERSONAL COMPUTER GATEWAY E-4 MONITOR GATEWAY 17" FAN LAKEWOOD PRINTER LASER JET COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN IOMEGA PARALLEL ZIP PRINTER HP 5SI COMPUTER GATEWAY E-4 MONITOR FLAT SCREEN MONITOR COLOR 17" SCANNER FLATBED COMPUTER PERSONAL TRANSCRIBER MONITOR COMPUTER PERSONAL MONITOR FLAT SCREEN COMPUTER GATEWAY E-4

Owner's Manual

CMC13410 CMC19410

[nstructio_]s

Important

Safety Information

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL, This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and_ in particular_ specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug. Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws. To prevent damage which may resuk in fire or emectric shock hazard do not expose thws appliance te rain or moisture.
2 IK,II:'()RJAN'J SAFq!iI'Y INSFR[J(t']I(bNS
Always be careful when using your TV/VCR. To reduce the risk of fire_ electrical shock, and other injuries, keep these safety precautions in mind when installing_ using_ and maintaining your machine. Read all safety and operating TV/VCR. Retain the safety and operating Heed all warnings Follow a!l operating instructions instructions before operating the for future reference. instructions.
on the TV/VCR and in the operating and use instructions.
Unplug the TV/VCR from the wall outlet before cleaning. damp cloth; do not use liquid or aerosol cleaners.

Use a of

Never add any attachments and/or equipment without approval the manufacturer. Such additions may result in the risk of fire, electric shock, or other personal it!jury. Do not use the TV/VCR where contact with or immersion a possibility, such as near bath tubs, sinks, washing swimming pools, etc. machine%

in water is

Provide ventilation for the TV/VCR. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings, and do not place the TV/VCR on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the TV/VCR on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting.

IMPORTANT

SAFETY

INSTRUCTIONS

Save These

[nstructio*_s

tmper_ant Safety information, congif_uerJ
Do not place the TV/VCR on an unstable cart, stand, tripod, bracket, or table. The TV/VCR may fall, causing serious injury to a child or adult, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the TV/VCR. Follow the manufacturer's instructions when mounting the unit, and use a mounting accessory recommended by the manufacturer. Move the TV/VCR and its cart with care, Quick stops, excessive force, and uneven surfaces may cause the unit and cart to overturn, Operate your TV/VCR only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or Ioca! power company. Use only a grounded or polarized outlet. For your safety, this TV/VCR is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact your electrician to replace your outlet. Protect the power cord. Power supply cords should that they are unlikely to be walked on or pinched by on or against them. Pay particular attention to cords venience receptacles, and the point where they exit be routed so items placed at plugs, confrom the unit.

@ , @

2_ P.PLUS
Press to compensate poor rental tape, _:_ for a
P. (pause)/gTJLL Press to freeze a video flame. Press to select the tape recording speed.

=@ -@ @@@-@ -@ @

L? SPEED

iiiiiiii i

C:IbM)FER

(:)]X[E:

LEARN]IX[(;

AP;()UI

Nl!\,g'

INSTALLATION

Connecting VHF and

UHF Antennas

If you do not have cable TV, you must connect an antenna to your TV/VCR. First you need to identify your antenna's lead type: If you are using the antenna that has 300-ohm twin fiat leads, (see the illustration below) see "Antennas With 300-ohm Fiat [win Leads,"on this page.
Antennas With 300-ohm Rat Twin Leads
If you use a different 300-ohm antenna with twin flat leads, follow the directions below, but skip step 1. Push time stem of the rod antenna into the antenna

mount,

,_;;_ Place the wires from the twin leads under the screws on the 300-75 ohm adapter (not supplied). Use a screwdriver to tighten the screws.
Antennas With 75-ohm Round Learls
Plug the lead into the terminal on the rear panel of the TV/VCR.
,_JPlug the adapter into the terminal on the rear panel of the TV/VCR. If your antenna has a 75-ohm round lead (see the illustration below), see "Antennas With 75-ohm Round Leads," on this page, Extend the antenna and If you have two antennas, see "Separate VHF and UHF Antennas," on this page, adjust it for the clearest picture. To reduce the risk of damage, onty ac_;ust the antenna bY moving the black plastic base.
Separate VHF and UHF Antennas
if you have two separate antennas for your TV/VCR (one VFIF and one UHF), you must combine the two antenna signals before connecting them to the TV/VCR. This procedure requires a combiner attachment that you can purchase at an electronics store.

(-]HAPTI

R Tvv():

[NS'IAI

[ A:II(:)N
Connecting VHFand UHF Antennas, continued
If you use a different 300-ohm antenna with twin flat leads, follow the directions below, but skip step 1. Push the stem of the rod antenna into the antenna
Connecting CaNe TV Systems to the TV/VC
,/_ Plug the combiner into the terminal on the rear panel of the TV/VCR. Choose one of the sections below for connecting ,/ a cane system. TbisTV/V(;R is cable ready:you don't needa converterfor basic cablechannels,

Cable With a Converter Box
If your cable company scrambles some channels and requires you to use a converter box for only those channels, use these instructions. You will need the following pieces of equipment, which you can purchase from an electronics store: , , A two-way splitter
Cable Without a Converter Box
To connect cable without a converter box: Plug the incoming cane into the terminal on the rear panel of the TV/VCR.
An RF (A/B) switch Four lengths of coaxial cable Plug the incoming cable into the 2-way splitter.
_{_ Connect both antenna leads to a combiner.

Incoming Cable Splitter

[ NS']'/_I

[ A:[ [(bN

Connecting CaNe TVSystems

to the TV/VC, continued

2 Connect one of the coaxial canes input on the converter box. between the splitter and the
S Connect the fourth coaxial cable between the output on the RF (A/B) switch and the terminal on the TV/VCR's back pane!.
Incoming Cable Splitter Converter Box

TV/VCR Rear

,i} Connect a second coaxia! cane between the output of the converter box and the "B" input on the RF(A/B) switch.
Choose the "A" position on the A/B switch to select all nonscrambled channels by remote control. Choose the "B" position on the A/B switch to select scrambled channels via the converter box. When using the "B" position, tune your TV/VCR to the output channel of the converter box (usually channel 3 or 4).

Splitter Converter Box

RF (A/B) Switch
_ Connect a third coaxial cable between the splitter and the "A" input on the RF(A/B) switch.

... / E

Oonve_erSox

CItAPTI!R

'T'V\ ():

[NS'J/\I

I A:[I(bN

Installing

Batteries

in the Remete Centre_

by pressing down on the back d Replace the cover,
Open the battery compartment cover's tab, then lifting up,
,/ _{_ Install two AAA size batteries. Make sure to match the + and ,/
if you won't be using the 1emotecontrol for a long time, removethe batteriesand store them in a cool, dry place. Batteries last for aboutone year
ends of the batteries with the diagram inside the compartment.

[NS']'AI

I A:[ K)N

OPERATION

Viewing the On-screen Display
The on-screen display automatically appears on the screen when you turn the TV/VCR on or change its status (from stop to play, from play to stop, etc.). You can also activate the on-screen displays manually by using the remote control. With the power on, press DISPLAY.

Viewing the Main Menu

Selecting

Omscreen Language

_ Press DISPLAYagain (while the display items are still on the TV/VCRscreen) to display the time counter. With the power on, press MENU.

Press VOL+ to finish the clock set. Setting the date Press CHY to select the Date.
Press VOL+ to select the day digits. Press CHa, or CHV to set the current day,
_/ If you make a mistake, press VOL to movebackto the incorrect item. PressCHA and CH_ to changethe item, ,5" Press MENU to exit the
Press CHV until "Setup" selected. Press VOL+,

C}ltAP'1"I !1,'

TV C)p[xi\I"ION
Choosing Picture Settings
_ PressVOL+. Press CHA and CHV to select your local PBS channel. Press VOL+ or VOL- again to lock in the PBS channel.
[] Press CHV to select the "DST"(Daylight Time).
Auto Auto PBS Time Clock Clock Channel Zone Set Set : On : 07 : HAW
, Press CHV until "Auto Clock Set" is selected. Press VOL+.

Savings

Your TV/VCR has preset standard values for picture settings (contrast, brightness, sharpness, color, and tint). You can also customize these settings.
Customizing Picture Settings
Press MENU to display the menu.
Press VOL+to select Auto Clock Set "On".
_/ Tirepicturechanges according the to channel. Y Press the CH'_ button to select the "Time Zone"
While "DST"is selected pressVOL+ to indicate"Yes,"or "No." (SetDST"Yes"onthe appropriate day inApril. AndsetDST"No" on the appropriate day inOctober)
_{/:_ Press CHY until "Picture" selected. Press VOL+.
Press MENU to exit the menu. Thetime is automatically corrected whenviewingyourlocalPBSchannel.
,_" Press CHV to select the "PBS channel".
While"TimeZone"is selected, ress p eitherVOL+ or VOL to changetile TimeZone,
%quence: ALL,,EAST, tEN., MTN,, C) PER/_._.)1_LAS, HAW.
,_Press orCHV CH,A toselect Contrast, Brightness, Sharpness, orTint. Color,
_/Once made to you've changes oner ore picture om ofthe features, your settings are
stored in the TVNCR'smemory. Yourcustompicture setting now becomesthe ddault setting for the TV/VOR. Press CH_ or CH_' to select another setting or press MENU to exit the menu.
Using Automatic Picturre Settings
This is a special feature that automatically adjusts your picture for you. Press P-STD to select an automatic picture setting.
_ Press VOLor VOL- to change the setting. Choose Standard to set the TV to operate at top performance according to your TV's specifications. , Choose Mild when viewing the TV in low light, or when playing video games,. Choose Custom if you want to adjust the settings yourself.
The setting for the feature appears on the screen. ,_ Press MENU or wait a few seconds to store the setting.

CHAPTI

(_) PER i\]'I(:)N

Using the On/Off Timer

Setting the S_eep Timer
The sleep timer automatically turns off the TV/VCR at the time you select, This is convenient if you like to fall asleep with the television on, Press MENU to display the meF!u. ,_:_Press CHY until "Time Set" is selected, Press VOL+.
Press VOL+ or VOL- to set the length of time you want the TV/VCR to remain on; off, 10, 20, 30, 60, 90, 120, 150, or 180 minutes,
Time Clock On Time Set 07:3Opm 12:00pro Off
This timer turns the TV/VCR on or off at a specific time. You may set the on time, the off time, or both. Whatever you choose, you must turn the timer on after you set the on or off times. Press MENU to display the
,_ Press CH_, or CHV to set the hour the set will turn on. _ Press VOL+ to make the minutes flash,
,_ Press CH,& or CHV to set the minute the set will turn on, _ Press VOL+ to make the Off flash, Press CHA or CHT to set the timer to "ON." Setting the eft time Press CHV to select "Off Time." 2 Press vet+ flash. ,_ Press CHA or CHT to set the hour the set will turn off. Press VOL+ to make the minutes flash. ,5" Press CH_, or CHT to set the minute the set will turn off, _ 7 Press VOL+ and CH,& or CH_ to set the timer "On", Press MENU to exit the menu. to make the hour
Press CH_" until "Time Set" is selected, Press VOL+.
,_ Press MENU to exit the menu,
Setting the on time Press CHV to select "On Time." 2 Press VOL+ to make the hour flash,
3 Press CHV until "Sleep" is selected.

CItAI_']'I!R

(:)PI:RiV]'](:)N
inserting and Ejecting a Video Tape
To insert a video tape: Hold the video tape windowside up, with the arrow pointing away from you. The TV/VCR loads the tape automatically. If the power is off when you insert a tape, the TV/VCR turns on automatically. If the safety tab of your video tape has been removed, the tape begins to play automatically. Don't try to insert a tape upside down or backwards. Use only video tapes labeled "VHS." PAL and S-VHS video tapes are not compatible with this unit. Choose brand name, high quality tapes for best results. _ Gently push the tape through the compartment door until you tee! the VCR pull it in. 2 _/ Formore infon-rlation the on safety tab, see page 40. To eject a video cassette tape: Press STOP to stop playing the tape. _/ When yea'refinished playinga video tape, rewind it and removeit from the P?/VCRto protect it from wear andtear. Press STOP/EJECT on the TV/VCR to eject the tape. Remove the tape and turn off the TV/VCR.

P_ayinga Video Tape Playing a Tape
hsert the video tape. ,_ If the tape doesn't begin to play automatically, press PLAY.

Pausing

While a tape is playing, press P/STILL to pause the tape. There may be vertical jitter or horizontal streaks on the screen while a tape is paused. You can try to eliminate these problems by pressing the TRK + and TRK buttons on the remote control. _/ Forinformationon automatic tracking,see page25,
Then, if necessary, the TV/VCR will automatically adjust the tape's tracking. _/ Forinformationon automatic tracking,see page 25. _/ Forinformationon the time coantecsee page 25 2
After five minutes in pause, the TV/VCR automatically enters PLAY mode to protect the video heads. Press PLAY to resume playing the tape.

CIt/_I>I'[!;I-_

_(:)UR:

C)PI!I-b'_:I'I(:)N

CIt/_I>I'[!;R

_(:)(]R:

(:)P[!;RA']'I()N
Playing a Video Tape, continued

Using Picture Search

Picture Search lets you quickly search a pre-recorded video tape for a particular scene. While playing a tape, press and release FF or REW. The images from the tape are displayed on the screen at a high speed, This technique is useful if you are searching a small amount of tape. If you want to search a large amount of tape, stop the tape before pressing FF or REW. There is no sound while you search for a picture at high speeds, and some horizontal streaks may appear on the screen. 2 When you find the scene you want, press and release FF or REW again to resume playing the tape at regular speed,

Using Tracking

This feature automatically acljusts tracking on video tapes. Insert and play a video tape.

Using the Time Counter

The time counter allows you to keep track of how much time (in hours, minutes, and seconds) has elapsed on the video tape. The counter can also be useful if you want to find a specific point on a pre-recorded tape, While a tape is playing, press DISPLAY twice.

_/ TheW/VCR automatically resetsthe counterto "00:00:00" when you eject a tape or record ,_ Press DISPLAY to remove the time counter,

Using Memory Stop

Memory Stop makes it easy to find a particular scene in a video tape. The TV/VCR automatically stops rewinding or fast forwarding when the memory counter reaches "00:00:00." If you mark a desired scene as "00:00:00," you can search for it the next time you watch the tape. While playing a tape, when you reach the scene you want, press DISPLAY twice, _ The time counter appears. Press CLEAR to reset the timer to "00:00:00,"
When the tape begins to play, the TV/VCR begins automatic tracking. The tracking display will appear the first time a tape is played after being inserted into the TV/VCR, when there is a change in tape speed, or when you press TRK +,-. The time counter appears. The counter displays time only for recorded sections of tape. Blank tapes or blank sections of tapes do not affect the counter display, ,_ Press CLEAR to set the counter to "00:00:00."
If automatic tracking doesn't remove the streaks from the picture, press and hold TRK+ or TRK- until the streaks disappear.

(_]I_AI)'1"I

I, FOUR: _

I,_A:I'ION

To return to the scene you marked: Press STOR 2 Press FFor REWto return to the scene you marked. The TV/VCRstops the tape when the counter reaches "00:00:00." 3: Press PLAYto view the scene you marked again,
Recording TV Programs as You Watch

Using P_PLUS

Press RPLUS to compensate a poor rental tape. for

Recording

With your TV/VCR turned on, and with a tape in the unit, press SPEED. Besurethe record safetytab is in place.Forirfforrnationon the recordsafety tab, see page 40,
Select the television channel you want by pressing CHa, or CHV or by using the number buttons, If you are using the number buttons to select the channel, press 0 before a single-digit channel number (for channel 5, press 0, 5). Press RECon the remote control. The record indicator on the control panel illuminates and the TV/VCRbegins recording, _/ The TV/VCR automatically stops recording henit reacheshe w t endof thetape _/ Press STOPt anytimeto stop a recording, 7 Don'tchange tapespeeds hile w recording: thismay cause picture distortion during playback When you finish recording, rewind the tape and remove it from the TV/VCR.

information,see page 40. _:_ Press REC on the remote control twice.
_;:_Press CHV until "VCR Setup" is selected. Press VOL+.
/ Your recording time options are: 30 minutes, 1 hour, 1 hour and 30 minutes, 2 hours, 2 Imoursand 30 minutes, 3 hours, or 4 hours. ',!(_:R C)PI I,_ATIO]N
Theclock must be set to the correcttime and(late before you programthe timer
(_I_AP'1"I I, FOUR: _

Using A@anced Recording

Fea_res, continued
The TV/VCR assigns a number (1-6) to your entry which is used in the program review feature. (For more information, see page 22,) _/ If you makea mi,_lake any at point duringprogramrrfing, ress p VOL and CH_ until the number you want to changeis flashing, then enter the correct number If you are recording a channel that comes through a cable converter box, enter the output number of the cable box. _ Press CHV to select "Time," Press VOL+,
_ Press CHV until "Timer Record" is selected. Press VOL+.

S Press VOL+.

Y Press VOL+.
,_ Press VOL+, Press CHA or CHV to select the channel you want to record. Press VOL+ to lock in the channel you've chosen.
Press CH_or CHVto select the minute to begin recording. _J Press VOL+.
Press CH,A or CH_' to select the minute to end recording, Press VOL+ to lock in the minute,
Press CHA or CHT to select the hour to end recording. _/ The TV/VCR automatically selectsAM or PM for the endingtime
Press CHA or CHV to select the hour to begin recording.

(-:_IAPTI

R F()UR:

Using Advanced Recording

_ Press CHV to select "MO/DAY." Press VOL+. Press VOL+.
Z Press CHV to select "Select". Press VOL+
important , The TV/VCR should be offto record the programs you've chosen, But, if you are recording a channel that comes through a cable box, be sure to leave the cable box on and tuned to the channel you want to record,
Press CHA or CHV to select the month to begin recording. }} Press VOL+.
Pse CHA or CHV to select the year to begin recording. Press VOL+to lock in the year. " Press CHV to select "Speed",
, Press CFIV to select the "One Time", or "Weekly", "Daily". ,3 Press MENU to exit the
During timer recording, there is no picture on the screen because the power is off. If you want to watch the channel while it's being recorded, press POWER on the remote control One-time timer programs clear from memory after recording. Daily and weekly programs remain in the timer until you remove them, If power to the TV/VCR is interrupted, all programs will be disabled until you reset the clock. Then, the programs will be restored.
_/ If you enter two programtimes that overlap,a programoverlap warningappears onthe screen,along with instructiorJs for fixing the overlap
Press CHA or CHV to select the day to begin recording.

You can choose to have your "block" repeat from one to ten times,
Press MENU to exit the nlenu. Insert and play a prerecorded video tape. Press REPEAT at the beginning of the "block" you want to repeat. ("Repeat setting" appears on the screen when the button is pressed.)
,_ Press CHV until "Block Repeat" is selected, Press VOL+ to select the number of times you want your "block" to repeat.
,5 Press CH_' until "True Repeat" is selected, Press VOL+ to turn True Repeat on,

CItAP']'I!bI

SPK(Ii\[

Fh, AlUb,

Ct[/'A"J'l!bI

S[q!c1/'J

FE/\'I'[IbIES

[SPECIAL

FEATURES]
Using Block Repeat, continued
7 When you reach the end of the "block," press REPEAT again, The TV/VCR will rewind the tape to beginning of the block and repeat it, The TV/VCR will repeat tbe block as many times as the number you set in step 3. #J To stop block repeat, press the STOR R/STILL or PLAY buttons. You can also cancel block repeat by fast forwarding or rewinding to a point outside of the "block."

Viewing C_osed Captions

Your TV/VCR decodes and
displays closed captions. These captions are usually subtitles for the hearing impaired or translations into another language. All VCRs record the closed caption signal from television programs, so homerecorded video tapes also provide dosed captions, _/ Most pre recordedcommercialvideo tapes provide dosed captions Check for this symbol Ch_Jin your television scheduleandon tape packaging. Press MENU menu. to display the
/3 Press VOL+to turn the closed caption feature on.
_/ In text mode,information unrelatedto the captions is displayed,suchas news or weatheLlext often coversa large portionof the screen. ,5" [f you wish, use CH,_,CHT, or VOL+ to change the channel or field. Then, press MENU to return to normal viewing. 7 Different channeBdisplay different information.For exampb, (2hannel1 may have subtitles in English,whib Channel2 has subtitles in Spanish. Thesecond field contains additional informationthat could not be includedin the first field,
Misspellingsand unusual characterssometimesappearin closed captiontransmissions,
,{_ Press CHV untilCaption"is " selected. Press VOL+.
_/ There may bea small delay before captionsappearwhen you changecbarmeB, Press or CHV to selecL "Mode." Press VOL+ to choose "Caption" or "Text."

CIt/'d)I'[!;R

_B, [!2:l?[}( _

FD/',[.

CIt/'d)']'I!R

FB,]!:

_P[!;CI/\I

FD/',[ URIL.

[ SPECIAL

Using the V-CNp

The V-Chip feature automatically locks out programming that is deemed inappropriate for children. Fhe user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be set up or changed. Setting Up Your Personal ID Number (PIN) Press MENU to display the menu, _/:_ Press CHV until "V-chip" is selected. Press VOL+,

Tryanotherchannel.Make sure the unitisplugged intoa working walloutlet. , Adjustthe antenna, , Press LINE IN. Check all wire connections, Poor sound quamity.
Unit won't take video tape. , [',/fake sure the tape is window side up with the arrow pointing away from

Fast forward work. ,

Make sure the VCR is not in pause mode. Make sure the tape hasn't already been forwarded. during
, Tryanotherchannel, Adjustthe antenna, No color, wrong colors , or tints.
you. Make sure thereisno other tape inthe compartment. Unit didn't record a program. Make sure the antenna or cable is connected and that the TV/VCR is receiving tire broadcast signa!. Make sure the record safety tab on the tape is intact.
Make sure the program is broadcast in co!or, Adjust the picture settings. If the set is moved or turned in a different direction, the
Picture is streaked pause mode.
This is normal for SP recordings.
You can't receive reguEar broadcasts. Check the antenna or cable connections.
power should be OFF for at least 30 minutes. Picture rolls verticMly. , Adjust the antenna. Check all wire connections.

(_}I]APTI

R Six:

TR(bUB[

CSI IO(bTINC

CaringforYourTVIVCR

About Video Tapes
Please follow these guidelines to get the maximum performance from your TV/VCR.

Cabinet

. Never open the cabinet or touch the parts inside. Wipe your TV/VCR with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. Do not put heavy objects on top of the cabinet.
Use only video tapes marked VHSwith this TV/VCR.

Placement

. Do not place the TV/VCR near extremely hot, cold, humid or dusty places. Do not place the TV/VCR near appliances with electric motors that create magnetic fields, such as vacuum cleaners. Keep the ventilation openings dear; do not place the TV/VCR on a soft surface, such as cloth or paper. Place the TV/VCR in an upright position only.

Caring for Video Tapes

. Keep tapes away from direct sunlight, heat or cold. Insert tapes with the window side up and the arrow pointing away from you,. Do not subject tapes to violent vibrations or shocks, Never try to take apart or splice a video tape. Do not open the cassette, touch the tape, or put anything inside the tape case. Read the instructions supplied with video tapes,
Recording at slower tape speeds allows tapes to hold more program materia!. TAPE SP SLP Thr. 3 hrs. Thrs. 6 hrs. T160 2hrs., 8hrs. 40 rains.

Video Heads

Use a head cleaning tape to remove any dirt that has accumulated on the video heads. Follow the instructions that come with the cleaning tape; excessive use of a cleaning tape can shorten head life.

The Record Safety Tab

Most video tapes have a safety tab that must be intact to record, To protect a tape from erasure, you can break off the tab,

Liquids

Do not handle liquids near or on the TV/VCR. Liquids that spill into it can cause serious damage,

Temperature

If your TV/VCR is moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely.

Recording Speeds

You carl play or record a tape at:. SP (Standard Ray) speed SLP (Super Long Play) speed
To record on a cassette with the tab removed, cover the hole with cellophane tape.
Your TV/VCRautomatically plays tapes at the proper speed,

APPE]_DIx 39

[ APPENDIX

Specifications

Format
Heads Video: Four rotary heads Audio/control: One stationary head Erase: One full track erase, one audio track erase Video Input VIDEO IN jack (RCA) 1,0 V p-p, 75-ohm unbalanced Audio Input AUDIO IN jack (RCA) -8 dBm, 50K-ohm unbalanced TV tuners KHFinput, ch, 2 -ch, 13, cable channels "4A, A,-W, W+1,-W+84,
Model Power requirements Power consumption
CMC13410 120V AC,60Hz Approx. 0watts 6 whenon Approx. wattswhenoff 5
CMC19410 120V AC,60Hz Approx.70wattswhen on Approx.5wattswhenoff 487 x x rnm
VHS Standard Recording system Rotary, azimuth four-head helical scanning system Luminance: FM azimuth recording Color signal: Converted subcarrier phase shift recording Temevision system NTSC-type color signa! EIA Standard (525 lines, 60 fields) Audio track One track Tape width 12.7 mm (!/2 inch) Record speed SP. 33.35 mm/s (1.31 in.Is) SLP. 11.!2 mm/s (0.43 in./s) Record/playbaek time 480 minutes with %160 used in SLP mode FF/REW time Less than 2 rain. with %120

Dimensions(w x d x h)

381 x x mm
14.41 x15.04 15.00 x inches 19.13x 8.x19.17 inches Weight 11.2kg 124.691bs 19kg141.891bs
A-5,-A-I"75-ohm unbalanced
UHFinput, Operating ch. 14 -ch, 69 VHF, temperature C) UHF one input 75-ohm unbalanced

41 F-104 F (5c-40 Operating humidity 10% - 75%
Equipment specifications are subject to change without notice 40 APPENDIX
Curtis Mathes CoJorTelevisien
In-home servicewill be providedduringthewarrantylaborperiodsubjectto availabilitywithin the contiguous UnitedStates In-home serviceis notavaiJabie inall areas To receivein-home service,the productmustbe unobstructed andaccessibleto servicepersonnel If duringin- ' This CurtisMathesbrandproductassuppliedanddistributed CurtisMathesanddelivered by new,in theoriginalcartonto the originalconsumerpurchaser,s warrantedby CurtisMathes i againstmanufacturing efectsin materialsand workmanshipor a limitedwarrantyperiodof: d f Ninety (90)Days Labor and One (t) Year Partsand Two (2}YearsWarrantyfor Picture Tube(CRT) This limited warrantybeginson the originaldateof purchase, nd is validonly on products a purchased and used in the United States To receivewarrantyservice,the purchasermust contactCurtisMathesfor determination problemandserviceprocedures Warrantyservice of can onlybe performed bya Curtis Mathesauthorized servicecenter.The originaldatedbillof sale must be presenteduponrequestas proof d purchaseto Curtis Mathesor authorized servicecenter CurtisMatheswilt repairor replacethisproduct,at our optionand at no chargeas stipulated herein with newor reconditioned partsor productsif foundto be defectiveduringthe limited warrantyperiod specified above.All replaced partsandproducts becomethepropertyofCurtis Mathesand mustbe returnedto CurtisMathes.Replacement partsandproductsassumethe remaining originalwarranty,or ninety(%) days,whichever longer is Toobtainwarrantyservice pleasecontactCurtisMathesat:1o877o456o2788 Formoreproductandcustomersupportinformation, isitthe Curtis Mathes v websiteat: www.curtismathes.com homeservicerepaircan not be completed,t may be necessary remove,repairand return i to the productIf in-homeserviceis unavailable, urtisMathesmayelect at ouroptionto provide C for transportationof our choice to and from a Curtis Mathesauthorizedservice center Otherwise, ransportationto and from the Curtis Mathesauthorizedservice center is the t responsibility thepurchaser d
This limited warranty covers manufacturingdefects in materials and workmanship encountered innormal noncommercial useof this productandshallnotapplytothe following, including,but not limited to: damagewhich occursin shipment:deliveryand installation: applicationsand uses for which this productwas not intended;alteredproductor serial numbers;cosmetic damageor exteriorfinish;accidents, buse neglect,fire water,lightning a or otheractsd nature;use d products, quipmentsystems utilities,services, arts,supplies, e p accessories, pplications,nstallations, epairs externalwiring or connectorsnot suppliedor a i r authorized byCurtisMatheswhichdamagethisproductor resultin serviceproblemsincorrect electricalline voltage,fluctuationsand surges: customeradjustmentsand failure to follow operatinginstructionscleaning,maintenance andenvironmentalnstructions i thatare covered and prescribed inthe instruction book;productremovalandreinstallation:eception r problems and distortionrelatedto noise,echo, interference other signal transmission or and delivery problems: icturetube (CRT)brightness p relatedto normalaging,or burned-inimages Curtis Mathesdoesnot warrantuninterrupted r error-freeoperation the product o d

A['[ I::_sl')ix "

THERE ARE NO EXPRESSEDVVARRANTIES OTHER THAN THOSE LISTEDAND DESCRIBEDABOVE, AND NO WARRANTIES WHETHEREXPRESSEDOR IMPLIED, INCLUDING, UTNOTLIMITED ANYIMPLIEDWARRANTIES MERCHANTABILITY B TO OF OR FITNESSFORA PARTICULAR PURPOSE, HALLAPPLY S AFTERTHE EXPRESSED WARRANTY PERIODSSTATED ABOVE AND NO OTHEREXPRESSED WARRANTY OR GUARANTY GIVENBYANYPERSON, IRMORCORPORATION ITHRESPECT F W TOTHIS PRODUCT SHALLBE BINDINGONCurtis Mathes CurtisMathesSHALLNOTBE LIABLE FOR LOSS OF REVENUEOR PROFITS,FAILURETO REALIZESAVINGSOR OTHER BENEFITS ORANY OTHERSPECIAL,iNCIDENTAL CONSEQUENTIAL OR DAMAGES CAUSEDBYTHE USE,MISUSEORiNABILITY USETHIS PRODUCT, EGARDLESS TO R OF THE LEGAL THEORYONWHICHTHECLAIMISBASED EVEN IF Curtis MathesHAS BEENADVISEDOFTHE POSSIBILITY SUCHDAMAGES NORSHALLRECOVERY OF OF ANY KiNDAGAINSTCurtis MathesBE GREATER AMOUNTTHAN THE PURCHASE iN PRICE OF THE PRODUCTSOLD BY Curtis Mathes AND CAUSINGTHE ALLEGED DAMAGE WITHOUTLIMITINGTHE FOREGOINGPURCHASER ASSUMESALL RISK AND LIABILITY FORLOSS,DAMAGEOR INJURYTO PURCHASER ANDPURCHASER'S PROPERTY AND TO OTHER8AND THEIR PROPERTY. RISINGOUT OF THE USE, A MISUSEORINABiLiTYTO USETHIS PRODUCT SOLDBYCurtis Mathes,NOTCAUSED DIRECTLY BYTHE NEGLIGENCE Curtis Mathes THISLIMITEDWARRANTY OF SHALL NOT EXTENDTO ANYONE OTHER THAN THE ORIGINALPURCHASEROF THIS PRODUCT.S NONTRANSFERABLE I ANDSTATES YOUREXCLUSIVE REMEDY' Somestatesdo notallowlimitationson howlong an impliedwarrantylasts,or theexclusionor limitationof incidentalor consequential amages, othe abovelimitationsor exclusions d s may not applyto you This warrantygivesyou specificlegalrights,andyou mayalso haveother rightswhichvary fromstate to state

A_BN[)IX

This product
is ]isted by lJnder\vriter to meet and
s Laboratories, rigid UL. electr[ca[
designed _*nd manuf_ctured against X radiation,
s_ifety standards hazards.

file casualty

As an ENERGY STAR Partner, Curtis Mathes has deternfined that
this product or product model meets the ENERGY STAR guidelines for energy effiencyo

CurtisMathes

3250 W. Big Beaver Troy, MI 48084 Rd.
For more information products, please visit

this or other

Curtis

Mathes

our web site at:

www.curtismathes.com.

AA68-02476A