CyberHome CH-DVD300
Code-Free NTSC & PAL DVD Player

Quick Glance

Video Output:
Component Video, Composite (RCA), S-Video Audio CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW, SVCD, Video CD (VCD) Digital Coaxial, RCA

Media Supported:

Audio Output:

Compatible Media

Audio CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW, SVCD, Video CD (VCD) Component Video, Composite (RCA), S-Video Digital Coaxial, RCA Line In (RCA), Line Out (RCA-style), Coaxial (RF), Component, Composite (RCA), S-Video

Interface

Video Output: Audio Output:
Audio Audio Video Interface Type: Video Video Video

Video Quality

Video Features: Video Format Standard:
Motion Zoom (2x, 4x), Repeat Mode, Slow-Motion NTSC, PAL

Audio Quality

Audio Features:

Other Features

MP3 Support
General Features: Remote Control:

Dimensions

JPEG Picture Viewing, MP3 Support, On Screen Display (OSD), Parental Lock, Progressive Scan Same Brand Remote
Height: Width: Depth: Weight:
2 in 8.86 in 9 in 3.5 lbs

RENTFUSION

www.rentfusion.com

CH-DVD 300 Quick Setup Guide
1 Connect the DVD Player to your TV
Use the AV (Audio/Video) cable provided to connect the DVD player to your TV as shown in the diagram. Your TV must be equipped with AV inputs like those pictured to the right in order to connect this unit. If your TV does not have AV inputs, you will need a RF Modulator to connect this player to your TV's antenna/cable input. RF Modulators are available at major electronics retailers.

ANTENNA / CABLE IN

VIDEO R - AUDIO - L

2 Plug-in the Power Cord

Plug the DVD player's electrical plug into a wall socket or power strip.

CH-DVD 300

R VIDEO Y S-VIDEO L COAXIAL PROGRESSIVE SCAN COMPONENT VIDEO OUT Pb/Cb Pr/Cr

POWER LED

3 Turn on the DVD Player and your TV
Press the POWER BUTTON on the front panel to turn the DVD player on. The POWER LED should now change from RED (STANDBY MODE) to GREEN (ON).
4 Select the VIDEO INPUT on your TV
The goal is to see the DVD player's splash screen on your TV. To do this, select the Video Input channel on your TV that corresponds with the input the player is plugged into. This procedure differs among TVs, but is normally done by pressing the VIDEO IN or INPUT button on the TV's remote control to select the Video Input. When the DVD player's splash screen appears on your TV, you're ready to go!