This product can be set up using any current Web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3.

DWL-G810

D-Link AirPlus XtremeG
Ethernet-to-Wireless Bridge

Before You Begin

You must have at least the following: An Ethernet-enabled device, such as a game console, laptop or desktop computer, network printer or set-top box that will connect to the DWL-G810
Check Your Package Contents
DWL-G810 Ethernet-to-Wireless Bridge
CD-ROM (Manual and Warranty)
Ethernet (CAT5 UTP) Cable
Using a power supply with a different voltage rating will damage this product and void its warranty.
5V DC, 2.5A Power Adapter
If any of the above items are missing, please contact your reseller.
2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-G810 08212003
Connecting the DWL-G810 to your Ethernet-enabled device
A. First, connect the power adapter to the Receptor at the back panel of the DWL-G810 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of an Ethernet cable (included) to the Ethernet port on the back panel of the DWL-G810 and connect the other end to the Ethernet port located on the device (e.g., a set top box, gaming console, laptop or desktop computer, or network printer.) The LED light will blink when there is data transfer through the wireless connection. (Note: The Ethernet port on the DWL-G810 is Auto-MDI/MDI-X. Meaning you can use a straight-through or crossovercable to the Ethernet Port.) C. The antenna is used by the DWL-G810 to connect to other 802.11b/g wireless devices.
C. Antenna Used to wirelessly connect to 802.11b/g networks. B. LAN Port This is the connection for Ethernet cables to your Ethernet-enabled device.
A. Receptor for Power Adapter
Connecting the DWL-G810 in Infrastructure Mode

Setup #1

Connect an Ethernet cable from the DWL-G810 to your Ethernet-enabled: desktop PC, laptop PC, set-top box, or gaming console.
Connecting the DWL-G810 in Ad-Hoc Mode

Setup #2

Web-based Configuration
Before You Begin the Configuration
It is best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-G810. (Note: You also have the option of connecting the DWLG810 directly to the computer that will be used for configuration). The default IP address for the DWL-G810 is 192.168.0.30 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a static IP address within the same range as the DWL-G810s IP address for the purpose of configuring the DWL-G810. See the Manual on the CD-ROM if you need assistance in assigning a static IP address for your network adapter.
Open your Web browser and type http://192.168.0.30 into the URL address box. Then press the Enter or Return key. 4

Continued.

The log-in pop-up screen will appear.
Type admin for the user name and leave the password field blank.

Click OK

Once you have logged in, the Home screen will appear.

Click Run Wizard

You will see the following screens.

Click Next

Step 1 - Set up your new password. You have the option to establish a password.
Step 2 - Setup your Wireless LAN Connection The default wireless settings are: Operating Mode = Infrastructure SSID = default Channel = 6 Click Site Survey to select a wireless network or you can change the settings manually to match an existing wireless network. For Set Up #2 select Ad-hoc as the operating mode. Click Next Step 3 - Setup your Encryption The DWL-G810 is capable of three levels of wireless encryption 64-, 128-, and 256-bit. By default the Encryption is disabled. You can change the Encryption settings for more secure wireless communication.

Click Restart

Click Close

You have completed the Configuration of the DWL-G810!
Connecting the DWL-G810 to your XBox

Xbox Setup

Step 1 - Please refer to Step 4 (pg.4) for configuring and modifying the wireless settings of the DWL-G810
Step 2 - Connect an Ethernet cable from the DWL-G810 to the Ethernet port on the back of your Xbox.
In order to connect to the XBox Live service, you will need to have the proper XBox Live equipment and account.
Connecting the DWL-G810 to your Playstation2

PlayStation 2 Setup

Step 2 - Connect an Ethernet cable from the DWL-G810 to the Ethernet port on the back of your PlayStation 2.

Appendix

Assigning a Static IP Address in Windows
To assign a static IP address to the laptop or computer that you are using to configure the DWL-G810, please do the following:
Note: The following screens are taken using Windows XP. Your screens may look similar.
Go to Start > Double-click on Control Panel > Double-click on Network Connections > Right-click on Local Area Connections > Click Properties
Highlight Internet Protocol (TCP/IP) Click Properties
Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window Input your IP address and subnet mask. (The IP address must be within the same range as the DWL-G810. The IP Address of the DWL-G810 is 192.168.0.30. You can assign 192.168.0.51 for your computer. No two computers can have the same IP a ddress. Assign a subnet mask of 255.255.255.0.) Click OK
Assigning a Static IP Address in Macintosh OS X
Go to the Apple Menu Click on Network and Select System Preferences

Click on Network

Select Built in Ethernet in the Show pull-down menu
Select Using DHCP in the Configuration pulldown menu
The IP address information, the Subnet Mask, the Routers IP address and the Ethernet adapter address will appear Click on Apply Now

Technical Support

You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone: (877) 453-hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca