System Requirements

Minimum System Requirements
Windows XP or Windows Vista At least 256MB of memory (512MB recommended) Internet Explorer 6.x or higher VGA card resolution: 800 x 600 or above CPU: 1.7GHz or above An available Ethernet connection

Package Contents

DCS-3110 Megapixel PoE Network Camera

Camera Stand

CD-ROM with Manual and Setup Wizard

Power Adapter

CAT5 Ethernet Cable
Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
D-Link DCS-3110 Quick Install Guide

Hardware Overview

Connections

Rear View

Microphone Connector: The camera has an internal built-in microphone. To use an external microphone, plug it into the microphone connector.
Audio Out Connector: Use the Audio Out connector for 2-way audio connection. Speakers (not included) may be connected to the camera for 2-way audio communication.
Reset Button Reset is initiated when the reset button is pressed once and held 30 seconds until the power LED flashes through its cycle twice.
Status LED Blinking Red: indicates power is being supplied to the camera. Solid Green: indicates that a connection has been established via Ethernet port. Blinking Green: indicates traffic movement in the camera. If the Ethernet connection is not established the Status LED will not glow.
Mic On/Off Switch: Select to turn the microphone On or Off.
Power Receptor Receptor for the supplied power adapter.
Ethernet Port (PoE) Connect the Network Camera to your network using a CAT5 Ethernet cable. This port supports the NWay protocol, allowing the network camera to automatically detect or negotiate the transmission speed of the network. The Ethernet port can also be used to power the camera by using a PoE switch.
DI/DO: The DCS-3110 provides a general I/O terminal block. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices. DC12V output : Support for external device (like IR light) RS485: Port is designed for external pan/tilt/zoom devices.

Interfaces

Front View
ICR and Built-in Microphone
IR-Cut Removable (ICR) Sensor The IR-Cut removable sensor will judge the light conditions and then switches from color to B/W accordingly.

Built-in Microphone

Compact Flash Card Slot
CF card slot CompactFlash (CF) is a mass storage device format used in portable electronic devices. The CF card slot can be seen at the side of the network camera. Note: Ensure to remove the rubber strip before using it.

Hardware Installation

Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the Network Cameras back panel and attach it to the network.
Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3110 will turn green to indicate a proper connection.
Attach the External Power Supply Attach the external power supply to the DC power input connector located on the Network Cameras back panel (labeled DC 12V) and connect the other end to an AC power outlet.
Note: The LED on the network camera will turn green, when you have a proper connection. The light might go on and off and your computer may show an intermittent loss of connectivity, this is normal until you have configured your Network Camera.
The package comes with a camera stand with a swivel ball screw head that can be attached to the Network Camera bottom socket cavity. Attach the camera stand to the Network Camera and station it for your application. There are holes located in the base of the camera stand allowing the camera to be mounted to the ceiling, or any wall securely.

Software Installation

Turn on the computer and insert the D-Link DCS-3110 CD into the CD-ROM drive. The following step-by-step instructions displayed are shown when using Windows Vista operating system. The steps and screens are similar when using other Windows operating systems.
Click Installation Wizard

Click Next to continue.

Click Next Click I Agree to accept the License Agreement.
Click I Agree 7 D-Link DCS-3110 Quick Install Guide
Software Installation To start the installation click Install. Note: The installation may take several minutes to complete.

Click Install

Click Finish to complete the installation.

Click Finish

Configuration
Configuring Your Camera with the Installation Wizard
Click on the D-Link Installation Wizard icon that was created in your Windows Start menu. The Installation Wizard will appear and show the MAC address of your DCS-3110 and an IP Address (which may or may not be correct depending on what you have your DCS-3110 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here. Note: A DHCP server is a device that supplies the same IP address.

Click Manual Setup

Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank.
Click Next 9 D-Link DCS-3110 Quick Install Guide
Configuration A new window will pop up to ask if you want to setup a PPPoE for the device. Click No for quick setup. For further information refer to the user manual for details.
Check the Get IP by DHCP Server automatically box to obtain a new IP address every time the camera starts up. Click Next to continue.

Click Next

Select UPnP Port Forwarding if your router supports this function. If not, choose Manual to manually enter your port numbers. Click Next to continue.
Configuration Click Next to continue.
A window will pop up asking you if you want to access the DCS-3110 via mobile phone. Clicking Yes will set the video resolution to 176x144.
Click Apply to apply the settings listed in the window to the device. Application may take a few minutes to process.

Click Apply

Configuration A window will pop up to confirm that the application was successfully configured. Click OK to continue. A new window will pop up displaying the links/addresses to access your device. Click Add to my favorite to save the address and then click Exit to complete the installation.
Click Exit Double-click the DCS-3110 to launch the cameras web configuration page. Note: Please refer to the user manual for more information.
Configuration Enter admin as the default username and leave the password blank. Click OK to continue.

This section shows your cameras live video. You can control your settings using the buttons at the bottom. For more information on using the web configuration, please refer to the user manual.
D-Links website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone.

Technical Support

United States
Telephone (877) 354-6555 World Wide Web http://support.dlink.com

Canada

Telephone (877) 354-6560 World Wide Web http://support.dlink.ca
Version 2.0 January 5, 2010 625006002G
Copyright 2008-2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
D-link DCS-3110 Network Camera (DCS-3110/E)
DCS-3110 Fixed Network Camera, Megapixel, Day & Night, PoE

Price details:

Price excl. VAT: 295.53 Eco fees: 0.04 VAT 21 %: 62.07
PDF generated on: 9 June, 2011

Product details:

Product code: DCS-3110/E EAN: 7900693159784 Manufacturer: D-Link

357.64

* VAT included Bold textHigh Resolution Surveillance The D-Link DCS-3110 Fixed Network Camera is a high performance megapixel camera designed for professional surveillance and security applications. Equipped with a 1.3 Megapixel Progressive Scan CMOS sensor and a 6mm Lens, the DCS-3110 allows you to capture a wider field of view with a resolution of up to 1280 x 1024. The built-in ICR filter in the DCS-3110 provides automatic Day/Night functionality, adjusting the image from color during the day (and in low-light conditions) to monochrome at night (or in extremely poor lighting conditions). With features such as simultaneous MPEG-4/MJPEG streaming, multicast MPEG-4 streaming, PoE support, a built-in Compact Flash card slot, and connectivity to a variety of external devices, the DCS-3110 is an extremely versatile solution for high quality, high resolution viewing and reliable recording throughout the day. Multiple Streaming The DCS-3110 supports simultaneous streaming of MPEG-4 and MJPEG video to provide both high quality and bandwidth efficient compression formats. MJPEG delivers greater file integrity, making it ideal for detailed monitoring situations. MPEG-4 has smaller file sizes, making it more useful for extended recording periods or for use in low bandwidth networks. Additionally, the DCS-3110 supports multicast MPEG-4 streaming allowing users to view content by subscribing to a multicast IP address on the network. High Resolution Surveillance The D-Link DCS-3110 Fixed Network Camera is a high performance megapixel camera designed for professional surveillance and security applications. Equipped with a 1.3 Megapixel Progressive Scan CMOS sensor and a 6mm Lens, the DCS-3110 allows you to capture a wider field of view with a resolution of up to 1280 x 1024. The built-in ICR filter in the DCS-3110 provides automatic Day/Night functionality, adjusting the image from color during the day (and in low-light conditions) to monochrome at night (or in extremely poor lighting conditions). With features such as simultaneous MPEG-4/MJPEG streaming, multicast MPEG-4 streaming, PoE support, a built-in Compact Flash card slot, and connectivity to a variety of external devices, the DCS-3110 is an extremely versatile solution for high quality, high resolution viewing and reliable recording throughout the day. Multiple Streaming The DCS-3110 supports simultaneous streaming of MPEG-4 and MJPEG video to provide both high quality and bandwidth efficient compression formats. MJPEG delivers greater file integrity, making it ideal for detailed monitoring situations. MPEG-4 has smaller file sizes, making it more useful for extended recording periods or for use in low bandwidth networks. Additionally, the DCS-3110 supports multicast MPEG-4 streaming allowing users to view content by subscribing to a multicast IP address on the network. Flexible Connectivity The DCS-3110 includes digital input and output ports (one each) allowing connectivity to external devices such as IR sensors, switches, and alarm relays. It also comes with a RS-485 interface, providing connectivity to an optional Pan/Tilt enclosure, which effectively adds pan/tilt functionality to the DCS-3110. Additionally, a 12V interface provides power for an optional LED illuminator. 3GPP Mobile Surveillance Support for 3GPP Mobile Surveillance1 allows you to view a live video feed from your compatible Internet-ready mobile phone with a 3GPP player installed. This extends your monitoring capability without requiring the use of a computer,

allowing you to check your camera's video feed while on-the-go. Additional Features The DCS-3110 comes with a built-in microphone and audio ports allowing 2-way audio communication2 when an external speaker is connected and even includes an audio switch to ensure privacy when needed. The DCS-3110 also comes with a built-in Samba client for NAS so there is no need for a direct connection to a PC or any other hardware or software to capture and transfer images. Equipped with 802.3af Power over Ethernet (PoE) support3, the DCS-3110 can receive both power and data over a single Ethernet cable, allowing you to place this camera in locations without a power outlet. Convenient Management The included D-Link D-ViewCam 2.0 software enables you to manage up to 32 network cameras, set e-mail alert notifications, set recording schedules, and trigger motion detection to record directly to your hard drive. D-ViewCam 2.0 also allows you to upload a floor plan of your business and create a realistic layout of where your cameras are located, further simplifying the management process.

Main specifications:

*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.