4.2.0.36

4.2 Pass 36 was built on January 4th, 2011 Added new support for the following cameras Scallap Imaging - Digital Window D7-180 Scallap Imaging - Digital Window Main Stream
Dlink - DCS-3415 Dlink - DCS-6110 Dlink - DCS-6111 Dlink - DVS-210 Dlink - DVS-310 Dlink - DCS-1100 Dlink - DCS-1130 Dlink - DCS-2102 Dlink - DCS-2121 Dlink - DCS-3411 Dlink - DCS-3430 Asoni - CAM413 Asoni - CAM416 Asoni - CAM417 Asoni - CAM418 Asoni - CAM422 Asoni - CAM424 Asoni - CAM425 Asoni - CAM426 Asoni - CAM427
Dlink - DCS-3710 Dlink - DCS-5230 Dlink - DCS-5605 Dlink - DCS-5635 Dlink - DCS-6410 Dlink - DCS-6510 Dlink - DCS-6511 Dlink - DCS-7110 Dlink - DCS-7410 Dlink - DCS-7510 Hikvision - ability to get the 2nd stream Luxon Encoder 4
Asoni - CAM428 Asoni - CAM436

Asoni - CAM437

Asoni - CAM438 Asoni - CAM439

Asoni - CAM450

Asoni - CAM451 Asoni - CAM614 Asoni - CAM615 Asoni - CAM616 Asoni - CAM619 Asoni - CAM620 Asoni - CAM624 Asoni - CAM627 Asoni - CAM628 Asoni - CAM629 Asoni - CAM636 Asoni - CAM638 Asoni - SVR410 Asoni - SVR440 Asoni - SVR640 Asoni - Ip Camera

4.2.0.34

4.2 Pass 32 was built on December 12th, 2010 Fixes, Improved support, Features added Fixed user redundency problem
Fixed Web Client problem where it bogged down or locked up during playback when a user selected succession. Fixed iPad / iPhone 'desktop' icon for Web Client
Added a message to indicating if a test email was sent successfully.
Fixed scroll wheel and PTZ cameras in continuous mode Fixed layout indexing issue Updated the Backup utility UI and compiled for 64-bit Added new support for the following cameras Luxon IPC540 Box camera Luxon IPD640 Dome Camera Luxon IPVD54 Luxon Encoder

Dlink DCS-6510

4.2.0.32
4.2 Pass 32 was built on November 19th, 2010 Changed the time it deletes temp files Added H264 support for the following cameras Sentry 360 - Insight Camera Sentry 360 - Insight DM 160 Sentry 360 - Insight IP 100 Sentry 360 - Insight IP 300 Sentry 360 - Insight IP 120 Sentry 360 - Insight IP 500 Sentry 360 - Insight IP 140 Sentry 360 - Insight IP 1100 Sentry 360 - Insight IP 190 Sentry 360 - Insight DM 100 Sentry 360 - Insight DM120 Added new support for the following cameras Sentry 360 - Insight IP 200 Sentry 360 - Insight DM 220 Sentry 360 - Insight IP 220 Sentry 360 - Insight DM 260 Added Audio and MPEG4 Support for the following cameras: Linksys WVC-200 Linksys WVC80N

4.2.0.30

4.2 Pass 30 was built on November 10th, 2010 Fixes, Improved support, Features added Improved PTZ support for Pixord cameras Updated support for LinkSys WVC-200 and WVC-80n cameras Fixed some consistency issues with the home button on ptz controls Added Support for the following cameras: Panasonic WV-SP102 Panasonic WV-SF332 Panasonic WV-SP105 Panasonic WV-SF335 Panasonic WV-SP302 Panasonic WV-SF336 Panasonic WV-SP305 Panasonic WV-SC385
Panasonic WV-SP306 4.2.0.28 4.2 Pass 28 was built on November 2nd, 2010 Fixes, Improved support, Features added Updated the VirtualPushSource to support future functionality and compatibility Added Support for the following cameras: Arecont Vision AV1315 Arecont Vision AV2805 Arecont Vision AV1325 Arecont Vision AV2815 Panasonic WJ-GXE500 Arecont Vision AV2825 Axis Server 241Q - Camera side motion detection, MPEG4, and DIO support added Arecont Vision AV3130 + AV3135 Added DIO support 4.2 Pass 26 built on October 19th, 2010 Fixes, Improved support, Features added Added ability to timeout when viewing analog server information Modified the Options section in the IP Server Manager to tab format, and included analog timeout Added an option to show a force record on each window. The camera would then record (with audio if available) when pressed, until it is turned off.) Changed the date from standard to localized version on the time stamp of the video player. Fixed problem where importing users from another server would cause multiple entries. Fixed problem to give the diagnostics the ability to modify the database. Added a 19 camera layout to main button list and startup layout options. PTZ reworked for iPAD on the web client Active Directory changes made to avoid a potential memory leak Fixed problem where flipping the image was rotating it causing PTZ to be reversed for older Toshiba cameras. Added Support for the following cameras: ACTi ACM-5811 ACTi ACM-7511 ACTi TCD-2100 ACTi TCM-4201 ACTi TCM-7811 IQeye 751 Mobotix D24 Mobotix Q24

4.2.0.26

DVTel 9460 Fixed Dome DVTel 9540 Box Camera DVTel 9840 Speed Dome DVTel 900 Series Camera GeoVision IP-CAM 1.3M Infinova V1070 Mobotix M24 Mobotix T24
Mobotix x24 4.2.0.24 4.2 Pass 24 built on October 5th, 2010
Verint VISP Mpeg 4 Camera
Fixes, Improved support, Features added Moved the time location on the player control for 30-second review Motion Event time was changed to military time for sorting purposes Adjusted the timeline initial size, and when the screen is resized Fixed error with digital PTZ (Problem reported with Axis Q1755) Fixed player resizing issues on init and resize for media player Added an option to perform a force record on the mail layout title bars Added option to selectively stream from the analog server when viewing live images Optimized the loading of users when viewing properties Monitor whether we get motion events from Axis cameras on camera side MD. If the camera does not send motion events we switch to server side. Modified the method of rotating images for older cameras Added the following manufacturers to Auto Detection: DvTel Infinova Verint Updated to the newest version of the Vivotek Parser Fixed continuous focus issue for some PTZ cameras in the web client

4.2.0.22

4.2 Pass 22 built on September 24th, 2010 Fixes, Improved support, Features added Resized the player size to fit to the existing screen when launching dual players Found an unhandled exception with the iPlayer when initialized for dual players Hid the slider bar in the collapsible control panel when doing dual player controls, due to definition problems Changed Motion Settings dialog from a check box to radio buttons for camera side to server side motion detection When set to camera side motion detection, I disable the red outline and progress bar of the video which gave the false sense of motion Added a warning with a Are you sure you want to continue? option when the user does not enter the username or password when adding a new camera Created a new command channel call that gives a list of users. This will then populate the Send box when sending video to another user Fixed problem with the Live window popup mixing the two 13 camera layouts. (When the largest image should be top left corner it would make the largest in the center, and vice versa) Facility Map Setup dialog had a close button that did not close the window
Fixed a timing issue when attempting to print or save a file by using the rt.click on the image method Added Cameras to Auto Discovery

Support for the following cameras were added Vivotek FD7160 Vivotek MD7530 Vivotek MD7560 Vivotek FD8133
Vivotek FD8134 Vivotek IP8330 Vivotek IP8332
Camera MD and Audio Support for the following cameras were added Intellinet NFC31 Intellinet NSC16 Intellinet NBC30 Intellinet NSC15 Intellinet NFC30 Intellinet INT-550260/550277 Intellinet NFD30 Intellinet 550710 Intellinet NVS30 Intellinet Legacy camera IDView CAMoIP Gen2 4.2.0.20 4.2 Pass 20 was built on September 7th, 2010 Fixes, Improved support, Features added Added a Dual view for playing two simultaneous direct files Support for the following cameras were added Panasonic BLSony SNC-CH120 Sony SNC-CH140 Sony SNC-CH160 Sony SNC-CH180 Sony SNC-CH210 Sony SNC-RX530 Sony SNC-RX570 DIO Added for the following cameras Sony SNC-CM120 Sony SNC-CS10 Sony SNC-RH24 Sony SNC-RS44 Sony SNC-RS86 Sony SNC-RX550
Sony SNC-CH240 Sony SNC-DH120 Sony SNC-DH140 Sony SNC-DH160 Sony SNC-DH180 Sony SNC-DH240 Sony SNC-RX550
Sony SNC-CS11 Sony SNC-CS20 Sony SNC-RH64 Sony SNC-RS46 Sony SNC-RX530 Sony SNC-RX570

4.2.0.18

4.2 Pass 18 was built on August 26th, 2010 Fixes, Improved support, Features added Allow Access control doors unidentified to a camera to be displayed Fixed error where time date stamp was not burning in some conditions Support for the following cameras were added Infinova V1072 Infinova V1073 Infinova V1074 Infinova V1429N Infinova V123N Infinova V1725N Infinova V1726N Infinova V1727N Infinova V1728N Infinova V1729N Infinova V1731N Infinova V1743N Infinova V1745N Infinova V1746N Infinova V1747N
Infinova V1748N Infinova V1749N Infinova V6101 Infinova V6102 Infinova V6201 Infinova V6600 Series Infinova VV6621 Infinova V6622 Infinova V6623 Infinova V6641 Infinova V6642 Infinova V6643 Infinova V6821
DIO support added for Arecont Vision AV10005 Dlink DCS-6110 Camera side MD, Audio and DIO added

4.2.0.16

4.2 Pass 16 was built on August 4th, 2010 Fixes, Improved support, Features added Axis default capture format changed from mpeg4 to jpeg Fixed problem with Axis PTZ under certain capture formats Support for the following cameras was added: Axis FW 5.01 + Axis FW 5.01 UDP Axis FW 5.01 + PTZ Intellinet Camera 524421 Intellinet Camera 550901 Intellinet Camera 550932 Intellinet Camera 550949 Intellinet Camera 550956 Planet ICA-H312 Planet ICA-H610
Intellinet Camera 550963 Intellinet Camera 550970 Intellinet Camera 550987 Intellinet Camera 551021 Intellinet Camera 551038 Intellinet Camera 551052 Intellinet Camera 551083 Intellinet NVS30 Planet ICA-HM120 Planet ICA-HM125

Planet ICA-H651 Planet ICA-HM100 Planet ICA-HM100W Vivotek FD8361 4.2.0.12 4.2 Pass 12 was built on June 15th, 2010
Planet ICA-HM130 Planet ICA-HM135 Planet ICA-HM230 Planet ICA-HM350
Fixes, Improved support, Features added Webclient iPad support added Fixed Monitor Station racing condition for PTZ for clicking on text for specific cameras Fixed issue with IQeye and Camera side motion detection Fixed IQEye issue with resolutions and Web Client Fixed Arecont issue when camera was removed caused a racing condition in the Server 4.2.0.10 4.2 Pass 10 was built on June 10th, 2010 Fixes, Improved support, Features added Added support for native Video Insight code to replace the Axis SDK. Changed registration key, which required a change to Install, registration server, and Server Added 4.2 additional SDK support Added a bypass for Monitor Station to not validate active directory Changed MP3 as default audio compression Fixed active directory issue on validating cross domains Support for the following cameras was added: ACTi TCM-1011 ACTi TCM 1231/TCM-1232 ACTi TCM-3001/TCM-3011 ACTi TCM-3401/TCM-3411 ACTi TCM-3511 ACTi TCM-5001 ACTi TCM-5601/TCM-5611 ACTi TCM-7011 ACTi TCM-7411 Asoni CAM419 Asoni CAM613 Asoni CAM619 Asoni CAM630 Asoni CAM633 Asoni CAM647 Hikvision Camera
Axis M1054 Axis M1103 Axis M1104 Axis M1113 Axis M1114 Axis M3011 Axis M3014 Axis M3113 Axis M3114 Axis M3203 Axis M3204 Axis Q1910 Axis Q1910-E Axis Q6034 Axis P3304 Axis P3304-V
Hikvision DS-2CD732 Hikvision DS-2CD752 Hikvision DS-2CD762 Hikvision DS-2CD832 Hikvision DS-2CD862 Hikvision DS-2CD876 Hikvision DS-2CD886 UDP NVC 4000 UDP IPE 100 UDP IPE 110 UDP IPE 3510 UDP IPE 4100 UDP IPE 4500 UDP IPE 6500 UDP IPE 7500 UDP IPE 100M UDP IPE 1100M UDP IPE 3500M UDP IPE 1200HD UDP IPE 1202HD UDP IPE 3600HD UDP IPE 3602HD Vivotek PZ7151 Vivotek PZ7152 Vivotek IP7153 Vivotek IP7154 Vivotek IP7160 Vivotek IP7161
Linksys WVC80N Panasonic BB-HCM Jpeg SC Black BLK-IPE101 SC Black BLK-IPD101 SC Black BLK-IPD102 SC Black BLK-IPS101 SC Black BLK-IPS102M Vivotek PZ7112 Vivotek PZ7121 Vivotek PZ7122 Vivotek IP7130 Vivotek IP7131 Vivotek FD7131 Vivotek PZ7131 Vivotek FD7132 Vivotek IP7132 Vivotek PZ7132 Vivotek IP7133 Vivotek IP7134 Vivotek IP7138 Vivotek IP7139 Vivotek IP7142 Vivotek IP7251 Vivotek SD7313 Vivotek SD7323 Vivotek IP7330 Vivotek 7000 series PTZ