Reviews & Opinions
Independent and trusted. Read before buy D-link DI-524!

D-link DI-524

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
D-link DI-524, size: 4.6 MB
Related manuals
D-link DI-524 Quick Installation Guide
D-link DI-524UP Quick Install Guide
D-link DI-524 Configuration
D-link DI-524UP User Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

D-link DI-524D-Link Systems D-Link AirPlus G DI-524 Wireless Router Wireless router - EN, Fast EN, IEEE 802.11b, IEEE 802.11g

External, Firewall protection, auto-sensing per device, dynamic IP address assignment , DHCP support, NAT support, auto-negotiation, auto-uplink (auto…

D-Link, the industry leader in wireless networking, introduces another breakthrough in wireless connectivity. The D-Link AirPlus G DI-524 Wireless Router which is capable of transferring data at rates of up to 54Mbps in the 2.4GHz frequency - the same wireless frequency as 802.11b. The D-Link DI-524 Wireless Router also offers four Ethernet ports to support multiple computers. The advanced wireless technology built into the DI-524 Wireless Router offers data transfer speeds up to 54Mbps through ... Read more

 

[ Report abuse or wrong photo | Share your D-link DI-524 photo ]

Video review

Como configurar o roteador Wi Fi D Link DI 524

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
martin.kt@nb2bc.co.uk 7:22am on Saturday, August 28th, 2010 
Very happy with the value versus purchase price. Fast delivery exactly as promised by PC Nation. Ease of setup. I would buy it again if I needed another. this is an awesome product. Easy to install and service is perfect.
Ludwig 2:41pm on Friday, June 25th, 2010 
My device never worked properly. Connection is dropped on a regular basis, or refuses to connect altogether. This was my first experience with "home-made" networks and worked flawless. Got a second one for my brother and worked ok too.
Daniel.Beck 1:23pm on Sunday, June 13th, 2010 
its meh i bought this with my friends help years ago when i had no computer knowledge worked well for a year or so then started dropping connection.
madmatz 10:14am on Sunday, May 30th, 2010 
Not good. Reboots and slow performance READ THE FINE PRINT ON THE D-LINK WEBSITE!!! Wireless worked. READ THE FINE PRINT ON THE D-LINK WEBSITE!!!

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

D-Link AirPlus G DI-524
802.11g/2.4GHz Wireless Router

Manual

Building Networks for People

Contents

Package Contents... 3 Introduction... 4 Wireless Basics... 8 Getting Started...11 Using the Conguration Menu.. 12 Networking Basics... 39 Troubleshooting.... 54 Technical Specications... 61 Frequently Asked Questions.. 64 Contacting Technical Support... 92 Warranty and Registration... 93

Package Contents

Contents of Package:
D-Link AirPlus G DI-524 802.11g/2.4GHz Wireless Router Power Adapter-DC 5V, 2.5A Manual and Warranty on CD Quick Installation Guide Ethernet Cable (All the DI-524s Ethernet ports are Auto-MDIX)
Note: Using a power supply with a different voltage rating than the one included with the DI-524 will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
System Requirements for Conguration:
Ethernet-Based Cable or DSL Modem Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter Internet Explorer Version 6.0 or Netscape Navigator Version 6.0 and Above

Introduction

The D-Link AirPlus G DI-524 802.11g/2.4 Ghz Wireless Router is an 802.11g highperformance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the DI-524 provides data transfers at up to 54 Mbps* (compared to the standard 11 Mbps) when used with other D-Link AirPlus G products. The 802.11g standard is backwards compatible with 802.11b products. This means that you do not need to change your entire network to maintain connectivity. You may sacrice some of 802.11gs speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate when you incorporate the 802.11g standard into your 802.11b network. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11g devices. In addition to offering faster data transfer speeds when used with other 802.11g products, the DI-524 has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) and 802.1x compatible products in a network with a RADIUS server, the security features include: WPA: Wi-Fi Protected Access authorizes and identies users based on a secret key that changes automatically at a regular interval. WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the older WEP encryption required the keys to be changed manually.) 802.1x: Authentication is a rst line of defense against intrusion. In the Authentication process the server veries the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. For home users that will not incorporate a RADIUS server in their network, the security for the DI-524, used in conjunction with other 802.11g products, will still be much stronger than ever before. Utilizing the Pre Shared Key mode of WPA, the DI-524 will obtain a new security key every time it connects to the 802.11g network. You only need to input your encryption information once in the conguration menu. No longer will you have to manually input a new WEP key frequently to ensure security, with the DI-524, you will automatically receive a new key every time you connect, vastly increasing the safety of your communications.
*Maximum wireless signal rate based on IEEE Standard 802.11g specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafc, building materials and construction, and network overhead lower actual data throughput rate.

Connections

All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable.
Pressing the Reset Button restores the router to its original factory default settings.
Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to Ethernet-enabled computers.
The Auto MDI/ MDIX WAN port is the connection for the Ethernet cable to the Cable or DSL modem.
Receptor for the Power Adapter.
WAN LED A solid light indicates connection on the WAN port. This LED blinks during data transmission.

Mobility - Productivity increases when people have access to data in any location
within the operating range of the WLAN. Management decisions based on real-time information can signicantly improve worker efciency.
Low Implementation Costs WLANs are easy to set up, manage, change
and relocate. Networks that frequently change can benet from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and
easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or ofce.
Scalability WLANs can be congured in a variety of topologies to meet the needs
of specic applications and installations. Congurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.
Inexpensive Solution - Wireless network devices are as competitively priced as
conventional Ethernet network devices.
Wireless Basics (continued) Standards-Based Technology
The DI-524 Wireless Broadband Router utilizes the new 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54 Mbps* within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specied range of this device, you will be able to transfer large les quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting highspeed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The DI-524 is backwards compatible with 802.11b devices. This means that if you have an existing 802.11b network, the devices in that network will be compatible with 802.11g devices at speeds of up to 11Mbps in the 2.4GHz range.

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-524. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
IP AddressSubnet MaskLocal Domain-
The IP address of the LAN interface. The default IP address is: 192.168.0.1. The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0. This eld is optional. Enter in the local domain name.

Home > DHCP

DHCP stands for Dynamic Host Control Protocol. The DI-524 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain an IP Address Automatically. When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-524. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
DHCP ServerStarting IP AddressEnding IP AddressLease Time-
Select Enabled or Disabled. The default setting is Enabled. The starting IP address for the DHCP servers IP assignment. The ending IP address for the DHCP servers IP assignment. The length of time for the IP address lease. Enter the Lease time. The default setting is one hour.
Advanced > Virtual Server
The DI-524 can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-524 rewall feature lters out unrecognized packets to protect your LAN network so all computers networked with the DI-524 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-524 redirects the external service request to the appropriate server within the LAN network. The DI-524 is also capable of port-redirection meaning incoming trafc to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-dened virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service.

Public Type-

Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-524 can be setup to deny internal computers by their IP or MAC addresses. The DI-524 can also block users from accessing restricted web sites.
IP FiltersIPPortProtocol TypeSchedule-
Use IP Filters to deny LAN IP addresses from accessing the Internet. You can deny specic port numbers or all ports for the specic IP address. The IP address of the LAN computer that will be denied access to the Internet. The single port or port range that will be denied access to the Internet. Select the protocol type. This is the schedule of time when the IP Filter will be enabled.
Advanced > Filters > URL Blocking
URL Blocking is used to deny LAN computers from accessing specic web sites by the URL. A URL is a specially formatted text string that denes a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string to be blocked and click Apply. The text to be blocked will appear in the list. To delete the text, just highlight it and click Delete.
FiltersURL BlockingKeywords-
Select the lter you wish to use; in this case, URL Blocking was chosen. Select Enabled or Disabled. Block URLs which contain keywords listed below. Enter the keywords in this space.
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
FiltersMAC FiltersNameMAC AddressDHCP Client-
Select the lter you wish to use; in this case, MAC lters was chosen. Choose Disable MAC lters; allow MAC addresses listed below; or deny MAC addresses listed below. Enter the name here. Enter the MAC Address. Select a DHCP client from the pull-down list; click Clone to copy that MAC Address.
Advanced > Filters > Domain Blocking
Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specic domains on the Internet. Domain blocking will deny all requests to a specic domain such as http and ftp. It can also allow computers to access specic sites and deny all other sites.
FiltersSelect the lter you wish to use; in this case, Domain Blocking Domain Blocking- was chosen.
DisabledAllowDenySelect Disabled to disable Domain Blocking. Allows users to access all domains except Blocked Domains. Denies users access to all domains except Permitted Domains. Enter the Permitted Domains in this eld.

Permitted Domains-

Blocked Domains- Enter the Blocked Domains in this eld.

LANWAN-

IP Address: LAN/Private IP Address of the DI-524 Subnet Mask: LAN/Private Subnet Mask of the DI-524 IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Gateway: WAN/Public Gateway IP Address Domain Name Server: WAN/Public DNS IP Address WAN Status: WAN Connection Status MAC Address: Displays the MAC address SSID: Displays the current SSID Channel: Displays the current channel WEP: Indicates whether WEP is enabled or disabled

Wireless-

Status > Log

DI-754

The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log les under Log Settings.

View Log-

First Page - The rst page of the log. Last Page - The last page of the log. Previous - Moves back one log page. Next - Moves forward one log page. Clear - Clears the logs completely. Log Settings - Brings up the page to congure the log.
Status > Log > Log Settings
Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location.
SMTP Server/ IP Address Email Address -
The address of the SMTP server that will be used to send the logs. The email address to which the logs will be sent.

Status > Stats

The screen above displays theTrafc Statistics. Here you can view the amount of packets that pass through the DI-524 on both the WAN and the LAN ports. The trafc counter will reset if the device is rebooted.

Status > Wireless

The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client. Click on Help at any time, for more information.

Networking Basics

Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start>Control Panel>Network Connections Select Set up a home or small ofce network
When this screen appears, Click Next.

Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the

default

Check that the IP Address assigned to the wireless adapter is within
the same IP Address range as the access point and gateway. (Since the DI-524 has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no two devices may have the same IP Address. The subnet mask must be the same for all the computers on the network.) To check the IP Address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar > select the Support tab and the IP Address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a Static IP Address. See Networking Basics: Assigning a Static IP Address.)
If it is necessary to assign a Static IP Address to the wireless adapter,
Troubleshooting 3. Check that the drivers for the network adapters are installed properly.
You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.

Go to Start >

My Computer > Properties.

Select the

Hardware Tab.

Click Device

Manager.
Troubleshooting Double-click

on Network Adapters.

Right-click on D-Link
AirPlus DWL-G650 Wireless Cardbus Adapter (In this example we use the DWL-G650; you may be using other network adapters, but the procedure will remain the same.)

D-Link AirPlus DWL-650

Select Proper-
ties to check that the drivers are installed properly.
D-Link AirPlus DWL-G650 Wireless Cardbus Adapter
D-Link AirPlus DWL-650 Wireless Cardbus Adapter

Look under Device

Status to check that the device is working properly.
Troubleshooting 4. What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products.

Frequently Asked Questions
Why cant I access the web based conguration?
When entering the IP Address of the DI-524 (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. To resolve difculties accessing a web utility, please follow the steps below. Step 1 Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.
What type of cable should I be using?
The following connections require a Crossover Cable: Computer to Computer Computer to Uplink Port Computer to Access Point Computer to Print Server Computer/XBOX/PS2 to DWL-810 Computer/XBOX/PS2 to DWL-900AP+ Uplink Port to Uplink Port (hub/switch) Normal Port to Normal Port (hub/switch) The following connections require a Straight-through Cable: Computer to Residential Gateway/Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb: If there is a link light, the cable is right.
Frequently Asked Questions (continued)
Why cant I access the web based conguration? (continued)
What type of cable should I be using? (continued)
Whats the difference between a crossover cable and a straight-through cable? The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN congurations. EIA/TIA 568A/568B dene the wiring standards and allow for two different wiring color codes as illustrated in the following diagram. *The wires with colored backgrounds may have white stripes and may be denoted that way in diagrams found elsewhere. How to tell straight-through cable from a crossover cable: The main way to tell the difference between the two cable types is to compare the wiring order on the ends of the cable. If the wiring is the same on both sides, it is straight-through cable. If one side has opposite wiring, it is a crossover cable. All you need to remember to properly congure the cables is the pinout order of the two cable ends and the following rules: A straight-through cable has identical ends A crossover cable has different ends It makes no functional difference which standard you follow for straight-through cable ends, as long as both ends are the same. You can start a crossover cable with either standard as long as the other end is the other standard. It makes no functional difference which end is which. The order in which you pin the cable is important. Using a pattern other than what is specied in the above diagram could cause connection problems. When to use a crossover cable and when to use a straight-through cable: Computer to Computer Crossover Computer to an normal port on a Hub/Switch Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port Crossover Hub/Switch uplink port to another Hub/Switch normal port - Straight-through 65

Step 2 Disable any Internet security software running on the computer. Software rewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it. Step 3 Congure your Internet settings. Go to Start>Settings>Control Panel. Double click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.
Click to the Connection tab and set the dialup option to Never Dial a Connection. Click the LAN Settings button.
Nothing should be checked. Click OK.
Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK. Go to the desktop and close any open windows.
Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range.
How can I nd my IP Address in Windows 95, 98, or ME?
Step 1 Click on Start, then click on Run. Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown then click OK.
Step 3 The IP Conguration window will appear, displaying your Ethernet Adapter Information.
Select your adapter from the drop down menu. If you do not see your adapter in the drop down menu, your adapter is

not properly installed.

Step 4 After selecting your adapter, it will display your IP Address, subnet mask, and default gateway. Step 5 Click OK to close the IP Conguration window.
Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range.
How can I nd my IP Address in Windows 2000/XP?
Step 1 Click on Start and select Run. Step 2 Type cmd then click OK.
Step 3 From the Command Prompt, enter ipcong. It will return your IP Address, subnet mask, and default gateway.
Step 4 Type exit to close the command prompt.
Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most DLink devices use the 192.168.0.X range. Make sure you take note of your computers Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1.

How can I assign a Static IP Address in Windows XP? Step 1
Click on Start > Control Panel > Network and Internet Connections > Network connections. Step 2 See Step 2 for Windows 2000 and continue from there.
How can I assign a Static IP Address in Windows 2000? Step 1 Right-click on My Network
Places and select Properties. Step 2 Right-click on the Local Area Connection which represents your network card and select Properties.
Highlight Internet Protocol (TCP/ IP) and click Properties.
How can I assign a Static IP Address in Windows 2000? (continued)
Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X = 2-99. Make sure that the number you choose is not in use on the network. Set the Default Gateway to be the same as the LAN IP Address of your router (192.168.0.1). Set the Primary DNS to be the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or enter a DNS server from your ISP. Click OK twice. You may be asked if you want to reboot your computer. Click Yes.
How can I assign a Static IP Address in Windows 98/Me?
Step 1 From the desktop, right-click on the Network Neigborhood icon (Win ME - My Network Places) and select Properties. Highlight TCP/IP and click the Properties button. If you have more than 1 adapter, then there will be a TCP/IP Binding for each adapter. Highlight TCP/IP > (your network adapter) and then click Properties.
How can I assign a Static IP Address in Windows 98/Me? (continued)
Step 2 Click Specify an IP Address. Enter in an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X is between 2-99. Make sure that the number you choose is not in use on the network. Step 3 Click on the Gateway tab. Enter the LAN IP Address of your router here (192.168.0.1). Click Add when nished. Step 4 Click on the DNS Conguration tab. Click Enable DNS. Type in a Host (can be any word). Under DNS server search order, enter the LAN IP Address of your router (192.168.0.1). Click Add. Step 5 Click OK twice. When prompted to reboot your computer, click Yes. After you reboot, the computer will now have a static, private IP Address. Step 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions to login and complete the conguration.
How can I setup my router to work with a Cable modem connection?
(IE AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Note: Please congure the router with the computer that was last connected directly to the cable modem. Step 1 Log into the web based conguration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Clone Mac Address. Click on Apply and then Continue to save the changes.

How can I setup my router to work with Earthlink DSL or any PPPoE connection? (continued)
Step 8 Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the D-Link router. Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds and log back into the router. Step 10 Click on the Status tab in the web conguration where you can view the device info. Under WAN, click Connect. Click Continue when prompted. You should now see that the device info will show an IP Address, verifying that the device has connected to a server and has been assigned an IP Address.
Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus?
In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact AOL if you are not sure. To set up your router: Step 1 Log into the web-based conguration (192.168.0.1) and congure the WAN side to use PPPoE. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1 to 2 minutes to connect. If you connect to the Internet with a different internet service provider and want to use the AOL software, you can do that without conguring the routers rewall settings. You need to congure the AOL software to connect using TCP/IP. Go to http://www.aol.com for more specic conguration information of their software.
How do I open ports on my router?
To allow trafc from the internet to enter your local network, you will need to open up ports or the router will block the request. Step 1 Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 2 Click on Advanced on top and then click Virtual Server on the left side. Step 3 Check Enabled to activate entry. Step 4 Enter a name for your virtual server entry. Step 5 Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select both. Step 7 Enter the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network. Step 8 Enter the Schedule information. Step 9 Click Apply and then click Continue. Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual Server entries. Because our routers use NAT (Network Address Translation), you can only open a specic port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to congure 1 of the web servers to use port 81. Now you can open port 80 to the rst computer and then open port 81 to the other computer.

Server IP 192.168.0.5 192.168.0.6 192.168.0.7

Enable X X X

How do I use PC Anywhere with my DI-524 router?
You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1). Step 2 Click on Advanced at the top and then click Virtual Server on the left side. Step 3 Enter the information as seen below. The Private IP is the IP Address of the computer on your local Step 4 The rst entry will read as shown Step 5 Click Apply and then click Continue.
How do I use PC Anywhere with my DI-524 router? (continued)
Step 6 Create a second entry as shown here:
Step 7 Click Apply and then click Continue.
Step 8 Create a third and nal entry as shown here:
Step 9 Click Apply and then click Continue. Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the router, not your computers IP Address.
How can I use eDonkey behind my DI-524 router?
You must open ports on your router to allow incoming trafc while using eDonkey. eDonkey uses three ports (4 if using CLI): 4661 (TCP) To connect with a server 4662 (TCP) To connect with other clients 4665 (UDP) To communicate with servers other than the one you are connected to. 4663 (TCP) *Used with the command line (CLI) client when it is congured to allow remote connections. This is the case when using a Graphical Interface (such as the Java Interface) with the client. Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Firewall. Step 3 Create a new rewall rule: Click Enabled. Enter a name (edonkey). Click Allow. Next to Source, select WAN under interface. In the rst box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running eDonkey from. Leave the second box empty. Under Protocol, select *. In the port range boxes, enter 4661 in the rst box and then 4665 in the second box. Click Always or set a schedule. Step 4 Click Apply and then Continue.
How do I set up my DI-524 router for SOCOM on my Playstation 2?
To allow you to play SOCOM and hear audio, you must download the latest rmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1 Upgrade rmware (follow link above). Step 2 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 3 Click on the Advanced tab and then click on Virtual Server on the left side. Step 4 You will now create a new Virtual Server entry. Click Enabled and enter a name (socom). Enter the IP Address of your Playstation for Private IP. Step 5 For Protocol Type select Both. Enter 6869 for both the Private Port and Public Port. Click Always. Click Apply to save changes and then Continue.

You can nd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone.

Technical Support

Tech Support for customers within the United States:
D-Link Technical Support over the Telephone: (877) 453-hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca When contacting technical support, please provide the following information: Serial number of the unit Model number or product name Software type and version number
Warranty and Registration

(USA only)

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (D-Link) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO. Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below applicable to the product type (Warranty Period), except as otherwise stated herein. 3-Year Limited Warranty for the Product(s) is dened as follows: Hardware (excludingFans One (1) Year fans) Three (3) Years Power parts and and power supplies and Spare Supplies spare kits Ninety (90) days D-Links sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Links sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Ofce. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product (Software) will substantially conform to D-Links then current functional specications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (Warranty Period), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Links sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Links functional specications for the Software or to refund at D-Links sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the nonconforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is rst returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of DLinks products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold As-Is without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary. Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specic legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior notice. Copyright 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

doc1

This product can be set up using any current web browser, i.e., any curren ent browser i.e., owser, Internet Explorer 6 or Netscape Navigator 6.2.3.

DI-524

AirPlus G 802.11g/2.4GHz Wireless Router
1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or DSL modem with an established Internet account from an Internet Service Provider (ISP). 2. Its best to use the same computer that is connected to your modem for configuring the DI-524 AirPlus G Wireless Router. The DI-524 acts as a DHCP server and will assign all the necessary IP address information on your network. See Appendix at the end of this Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.

Before You Begin

Check Your Package Contents
DI-524 AirPlus G 802.11g/2.4GHz Wireless Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
Using a power supply with a different voltage rating will damage and void the warranty of this product.

5V DC Power Adapter

If any of the above items are missing, please contact your reseller.
2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-524. 11142003
Connecting The DI-524 Wireless Router To Your Network
A. First, connect the power adapter to the receptor at the back panel of the DI-524 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED lights up indicating proper operation. B. 1. Power off your Cable or DSL modem; devices that do not have a on/off switch and will require you to unplug the power adapter. Now, the DI-524 should be powered on and the Cable / DSL modem should be turned off. Cable / DSL modem (Power Off) DI-524 (Power On) 2. Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem. After the Ethernet cable is securely connected, power on the Cable / DSL modem by turning on the unit or plugging in the power adapter. Cable / DSL modem (Power On) DI-524 (Power On) 3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel of the DI-524. The WAN LED light will illuminate to indicate proper connection. If the WAN LED is not illuminated, please go back to step B1 and repeat the steps. C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-524 and an available Ethernet port on the network adapter in the computer you are using to configure the DI-524. The LED light for LAN Port 1 illuminates to indicate proper connection. (Note: The LAN Ports on the DI-524 are Auto-MDI/MDI-X. Meaning you can use a straight-through or crossover-Ethernet cable in the LAN Ports.) D. Computers equipped with 802.11g wireless adapters will be able to connect to the DI-524. The DWL-630 AirPlus G Wireless Cardbus Adapter and the DWL-510 AirPlus G Wireless PCI Adapter will be able to connect out of the box with the router using their default wireless settings.
D. Antenna Used to wirelessly connect to 802.11g or 802.11b adapters. C. LAN PORTS These are the connections for Ethernet cables to Ethernet enabled computers. B. WAN PORT This is for the connection of an Ethernet cable to the Cable or DSL modem. A. Receptor for Power Adapter.
Reset Button Pressing this button restores the Router to its original factory default settings.
Restart Your Computer Connecting Additional Computers To The DI-524
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-524.
Status LED a blinking light indicates that the DI-524 is functioning properly. Power LED a solid light indicates a proper connection to the power supply. WLAN LED a solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. LOCAL NETWORK LEDs a solid light on the port indicates a connection to an Ethernet enabled computer on ports 1-4. This LED blinks during data transmission.
WAN LED a solid light indicates connection on the WAN port. This LED blinks during data transmission.

When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this:

Using The Setup Wizard

Open your Web browser and type http://192.168.0.1 into the URL address box. Then press the Enter or Return key.
The logon pop-up screen will appear.
Type admin for the username and leave the password field blank.

Click OK

Once you have logged in, the Home screen will appear.

Click Run Wizard

The Setup Wizard (continued)
You will see the following screens:

Click Next

Set up your new password. You have the option to establish a password.
Choose your time zone from the drop down list.

Click Next 5

A this point, the setup wizard will try to auto-detect your Internet connection type. If you have a Dynamic or PPPoE connection, you will be brought to the corresponding page.
Otherwise, you will see the following screen: Select your Internet Connection. You will be prompted to select the type of Internet connection for your router.
If you are unsure of which setting to select, please contact your Internet Service Provider.
Click Next If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service.) Click the Clone MAC Address button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. Click Next 6
Please continue to Wireless Setup.
This setup should be done on the computer that is registered on the ISPs network.
If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields.
If your ISP uses PPPoE (Point-toPoint Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Enter in the username and password provided to you by your ISP.
Please be sure to remove any existing PPPoE client software installed on your computers.
The Setup Wizard (continued) Wireless Setup
The default wireless settings for your 802.11g wireless network are: SSID = default Channel = 6 You can change these settings to match an existing wireless network.

If you wish to use encryption for your 802.11g network, the DI-524 is capable of two levels of wireless encryption - 64-bit and 128-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication.

Your Setup is Complete!

Click Restart

Click Close

Test Internet Connection
You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the Manual located on the CD.

APPENDIX

To connect to the network, make sure the network adapter in your computer is configured properly. Heres how to configure the network adapter to obtain an IP address automatically for the DI-524 Wireless Broadband Router.
For Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Right click on the Network Connection associated with the Ethernet adapter and select Properties (i.e., D-Link DFE-530TX+).
Click Internet Protocol (TCP/IP)

Click Properties

Select Obtain an IP address automatically
Click OK Restart your computer (if necessary) 10
For Apple Macintosh OS X:
Go to the Apple Menu Click on System Preferences and Select Network. Click on Network
Select Built-in Ethernet in the Show pull down menu Select Using DHCP in the Configure pull down menu

Click on Apply Now

The IP address information, the Subnet Mask, the Routers IP address and the Ethernet adapter address will appear.
echnical Technical Support
You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone: (877) 453-hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com

Tech Support for customers within Canada:
D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca

 

Technical specifications

Full description

D-Link, the industry leader in wireless networking, introduces another breakthrough in wireless connectivity. The D-Link AirPlus G DI-524 Wireless Router which is capable of transferring data at rates of up to 54Mbps in the 2.4GHz frequency - the same wireless frequency as 802.11b. The D-Link DI-524 Wireless Router also offers four Ethernet ports to support multiple computers. The advanced wireless technology built into the DI-524 Wireless Router offers data transfer speeds up to 54Mbps through its wireless channels allowing streaming videos and other high bandwidth applications, such as online gaming events, to operate without the hassle of Ethernet cables. The ability to use high bandwidth applications also makes streaming real-time programs more enjoyable and more efficient. With the DI-524 Wireless Router's built-in advanced firewall, threats of hackers penetrating your network are minimized. Some firewall features include functions that allow or disallow certain ports to be open for certain applications. Time scheduling can be established as a firewall rule so that specific ports will be open at certain times and be closed at other times. Features like content filtering, MAC filtering, URL blocking, and domain blocking are useful tools to prevent other unwanted intruders from connecting to your network or browsing restricted sites. The easy-to-use configuration wizard takes only minutes to setup and guides users step-by-step through configuring the DI-524. With all the versatile features and a user-friendly utility, the DI-524 Wireless Router provides an enhanced networking experience.

General
Device TypeWireless router
Form FactorExternal
Width4.3 in
Depth5.6 in
Height1.2 in
Weight7.1 oz
Networking
Connectivity TechnologyWireless, wired
Integrated Switch4-port switch
Data Transfer Rate54 Mbps
Frequency Band2.4 GHz
Line Coding FormatCCK, BPSK, QPSK, OFDM
Data Link ProtocolEthernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Spread Spectrum MethodOFDM
Switching ProtocolEthernet
Network / Transport ProtocolPPTP, L2TP, IPSec, PPPoE
Remote Management ProtocolHTTP
Max Range Indoors330 ft
Max Range Open Space1310 ft
Status IndicatorsLink activity, power, link OK, status
FeaturesFirewall protection, auto-sensing per device, dynamic IP address assignment , DHCP support, NAT support, auto-negotiation, auto-uplink (auto MDI/MDI-X), MAC address filtering, VPN passthrough, URL filtering, IP address filtering, domain blocking
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x
Antenna
AntennaExternal detachable
Antenna Qty1
DirectivityOmni-directional
Expansion / Connectivity
Interfaces4 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN )
Miscellaneous
Encryption Algorithm128-bit WEP, 64-bit WEP, TKIP, WPA, WPA-PSK
Compliant StandardsCE, C-Tick, FCC
Power
Power DevicePower adapter - external
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating0 - 90%
Universal Product Identifiers
BrandD-Link Systems
Part NumberDI-524
GTIN00790069282546, 08032976048955, 04014619771219, 00790069264337

 

Tags

VP-X220L 720-0001 Headset H375 Deskpro 5100 Setup WFF 1201 RR-QR270 Pta60E SE2610S IN 1 3KF4866N Factor PC Satellite A200 Troubleshooting Easyshare C143 Sl N BS5000 Firmware 2 4 Digitech S200 1737X HK3500 SXG75 CDX-S2250 Password Infocus IN36 RV4000 Idect V2I Wireless Router EL-6320 GH388 Adapter D4000 Super MP3322 TVT 07 Guide PRO Fostex PH-5 Yamaha RY10 Beta 57A Speedtouch 605S Dppa-BT1 40B7000 11000 SA3025 MRP-F450 Midway Bladesystem Blackberry 8120 EX-Z600 Zapper KEH-8400R EM-303 HDC-SD100 LN32B450c4 AVR 350 SA-HE7 Pagepro 5650 TH-42PX600EN Reset Strav550 PDK-50HW2A Server Z8612 IS RA-800 ITD 62 Vampyr 5200 DVP-NC675P KDL-32P3500 DVD-1740 605-1 Impressa S50 Conditioner Chronograph PT-AE2000 Yamaha RX-7 CD482 NV-U70T Logitech G51 Aspire 9120 FD505-XXX MRP-F240 25PT532B RX590 Trooper Bizhub 200 Ericsson T28S DVD-S25 5890DN BDN 7022 EV1 RC-972 39X60 KM-4530 French Travelmate 4220 Portege 4000 FJR1300A-2008 AR-205 MS8318E DSC-6A SH-FX67E Psm75 BDZ-L95 405CX NEC VT48 Startac Install

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101