Reviews & Opinions
Independent and trusted. Read before buy D-link DI-614 !

D-link DI-614

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
D-link DI-614+ - Quick Installation Guide, size: 2.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

D-link DI-614 D-Link Systems D-Link AirPlus DI-614+ Wireless router - 4-port switch (integrated) - EN, Fast EN, IEEE 802.11b

External, Firewall protection, switching, DHCP support, NAT support, auto-correction of twisted-pair polarity reverse, VPN support, auto-negotiation

D-Link, the industry pioneer in wireless networking, introduces another performance breakthrough in wireless connectivity - the D-Link AirPlus series of high-speed networking products capable of data transfer rates up to 22 Mbps. And with the new AirPlus DI-614+, D-Link once again sets a new standard for wireless broadband routers. The AirPlus DI-614+ combines the latest advancements in 802.11b silicon chip technology from Texas Instruments and robust firewall security features. The DI-614+ is i... Read more

 

[ Report abuse or wrong photo | Share your D-link DI-614 photo ]

Video review

Burn in Hell DI 614+ Router

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
Sunman 7:56pm on Thursday, September 16th, 2010 
Targeted at Windows I use this camera from a Linux system which grabs images from the camera and pushes them out to a web site for public viewing. Could be so much better This web cam *requires* ActiveX.
Jkaen 10:57am on Thursday, August 26th, 2010 
Works as advertised, well-engineered, loaded with features, small size, great D-Link support. Difficult to configure.
Church Mouse 6:52am on Wednesday, August 25th, 2010 
Good Camera quality with the pan/tilt features. No Optical Zoom, you have to manually focus the lens on your target. Wait for a newer version with 802.11n, faster frame rate and for pete sakes, wait for D-link to improve the darn microphone.
drac0 12:47am on Thursday, April 29th, 2010 
D-Link DCS-5300G Video Work Around I recently purchased a D-Link DCS-5300G for home surveillance.
clementi 5:29am on Wednesday, March 31st, 2010 
Good Product, Bad online Support! Being a gadget freak - I have tried out many IP cameras.
mikew12345 11:16am on Friday, March 12th, 2010 
Targeted at Windows I use this camera from a Linux system which grabs images from the camera and pushes them out to a web site for public viewing.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

D-Link AirPlus DI-614+

Enhanced 2.4GHz Wireless Broadband Router

Manual

Building Networks for People

Contents

Package Contents... 3 Introduction... 4 Wireless Basics... 6 Getting Started... 9 Using the Conguration Menu.. 10 Troubleshooting.... 50 Networking Basics... 55 Technical Specications... 68 Contacting Technical Support... 70 Warranty... 71 Registration... 74

Package Contents

Contents of Package:
D-Link AirPlus DI-614+ Enhanced 2.4GHz Wireless Broadband Router
Power Adapter 5V DC, 2.5A Manual on CD Quick Installation Guide
Note: Using a power supply with a different voltage rating than the one included with the DI-614+ will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
System Requirements For Conguration:
Computer with a Windows, Macintosh, or Linux based
operating system with an installed Ethernet adapter with JavaScript enabled
Internet Explorer or Netscape Navigator, version 6.0 or above,

Introduction

The D-Link AirPlus DI-614+ Wireless Broadband Router is an enhanced 802.11b high-performance, wireless router. It is an ideal way to extend the reach and number of computers connected to your wireless network. Unlike most 802.11b routers, the DI-614+ is capable of data transfer speeds up to 22 Mbps* (compared to the standard 11 Mbps) when used with other D-Link AirPlus products such as the DWL-520+ Wireless PCI Adapter. After completing the steps outlined in the Quick Installation Guide (included in your package) you will have the ability to share information and resources, such as les and printers, and enjoy the freedom that wireless networking delivers. The DI-614+ is compatible with most popular operating systems, including Macintosh, Linux and Windows, and can be integrated into a large network. This Manual is designed to help you connect the Router and the D-Link AirPlus 2.4GHz Wireless Adapters into a network in Infrastructure mode. Please take a look at the Getting Started section in this manual to see an example of an Infrastructure network using the DI-614+. This manual provides a quick introduction to wireless technology and its application as it relates to networking. Please take a moment to read through this manual and get acquainted with wireless technology.
*Maximum wireless signal rate derived from IEEE Standard 802.11b specications. Actual data throughput wil vay. Network conditions and environmental factors, including volume of network trafc, building materials and construction, and network overhead lower actual data throughput rate.

Connections

Auto-Sensing Ports:All ports (both LAN and WAN) auto-sense cable types to accomodate stright-through or cross-over cable.
LAN ports provide connections to Ethernetenabled devices.
WAN port is the connection for the Ethernet cable to the Cable or DSL modem
Pressing the Reset Button restores the router to its original factory default settings.
Receptor for the Power Adapter
WLAN LED: A solid light indicates that the wireless segment is ready. This LED blinks during wireless transmission.
WAN LED: A solid light indicates connection on the WAN port. This LED blinks during transmission.
Power LED: A solid light indicates a proper connection to the power supply.
M1 LED: A solid light indicates that the DI-614+ is ready. M2 LED: A solid light indicates that the unit is defective.
Local Networ LED: A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission.

Wireless Basics

D-Link AirPlus wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link AirPlus wireless family of products will allow you to access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and ofce environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems, support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access Point (AP) is a device used to provide this link. People use wireless LAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can signicantly improve worker efciency. Low Implementation Costs WLANs (Wireless Local Area Networks) are easy to set up, manage, change and relocate. Networks that frequently change, both physically and logically, can benet from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation Speed and Simplicity - Installing a wireless LAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Network Expansion - Wireless technology allows the network to go where wires cannot go. Reduced Cost-of-Ownership - While the initial investment required for wireless LAN hardware might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle costs will be signicantly lower. Long-term cost benets are greatest in dynamic environments requiring frequent moves, adds, and changes. Scalability Wireless Local Area Networks (WLANs) can be congured in a variety of topologies to meet the needs of specic applications and installations. Congurations are easily changed and range from peer-to-peer networks suitable for a 6

small number of users to full infrastructure networks of thousands of users that allow roaming over a broad area. D-Link AirPlus Wireless Family of LAN products include:
Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop computers (DWL-650+) Enhanced 2.4GHz Wireless PCI cards used with desktop computers (DWL-520+) Enhanced 2.4GHz Wireless Router and Access Point (DI-614+, DWL900AP+)
The DI-614+ is also compatible with the D-Link Air 802.11b family of products, which include:
2.4GHz Wireless Cardbus Adapters used with laptop computers (DWL-650) 2.4GHz Wireless PCI cards used with desktop computers (DWL-520) Wireless Router/Access Point/Print Servers (DI-713P) Wireless Access Points (DWL-1000AP, DWL-900AP)
Standards - Based Technology The IEEE standard-based technology assures that the D-Link AirPlus Products are interoperable with existing compatible 2.4GHz wireless technology. This means you will be able to transfer large les quickly or even watch a movie in MPEG format over your network without noticeable delays. The technology works by using multiple frequencies in the 2.4GHz range at speeds up to 22 Mbps. D-Link AirPlus products will automatically sense the best possible connection speed to ensure the greatest speed and range possible with the technology. Installation Considerations Designed to go up to 1,312 feet (400 meters) outdoors and up to 328 feet (100 meters) indoors, the D-Link AirPlus DI-614+ lets you access your network with your laptop computer from virtually anywhere. Keep in mind, however, that the number, thickness and location of walls, ceilings or other objects that the wireless signals must pass thru may limit range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the wireless Access Point and your receiving device (e.g., the DWL-650+) to a minimum - Each wall or ceiling can reduce your D-Link AirPlus Wireless products range from 3-90 feet (1-30 meters.) Position your Access Points, Residential Gateways, and computers so that the number of walls or ceilings is minimized. Be aware of the direct line between Access Points, Residential Gateways (routers) and computers. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Try to make sure that the Access Points and adapters are positioned so that the signal will travel straight through a wall or ceiling for better reception. Building Materials make a difference - A solid metal door or aluminum studs may have a negative effect on range. Try to position Access Points, and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. Make sure that the devices antenna is positioned for best reception by using the software signal strength tools included with your product. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that may generate extreme RF noise.

Radius Server 1

IP - Enter the IP Address of the RADIUS server. Port - Enter the port number that your RADIUS server uses for Authentication. The default setting of 1812 is the port setting for many RADIUS servers. Shared Secret - Enter the Shared Secret. The Shared Secret must be the same as the Shared Secret on your RADIUS server.

Radius Server 2

Optional. If you have a second RADIUS server, you will input the same information as shown above.
Home > Wireless > WPA-PSK
Wi-Fi Protected Access - Pre-Shared Key mode means that the wireless client and the router must have the same passphrase in order to establish the wireless connection. A RADIUS server is not required with PSK.

Passphrase

Enter a passphrase for the router. The RADIUS server should use the same passphrase (secret key) as the router.
Conrmed Passphrase Enter the Passphrase again to conrm.

Home > WAN

Choose WAN Type
WAN stands for Wide Area Network. In this case WAN represents the mode in which you connect to the Internet. If you are uncertain, please ask your ISP which of the following represents your connection mode to the Internet:
Dynamic IP Address Static IP Address PPP over Ethernet Others PPTP L2TP Big Pond Cable
Obtain an IP address from your ISP automatically (mainly for Cable users). Your ISP assigns you a Static IP Address.
Some ISPs require the use of PPPoE to connect to their services (mainly for DSL users). For use in Europe only. For specic ISPs use only. For use in Australia only.
Home > WAN > Dynamic IP Address
Most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider).
Host Name MAC Address Clone MAC Address
This is optional, but may be required by some ISPs. The host name is the device name of the Router. The default MAC Address is set to the WANs physical interface MAC address on the Router. This feature will copy the MAC address of the Ethernet card, and replace the WAN MAC address of the Router with this Ethernet card MAC address. It is not recommended that you change the default MAC address unless required by your ISP. Input the primary DNS address provided by your ISP (Optional) Input the Secondary DNS address provided by your ISP. Maximum Transmission Unit; default is 1500; you may need to change the MTU to conform to your ISP.
Primary DNS Address Secondary DNS Address MTU
Home > WAN > Static IP Address
Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

Enable or disable the DHCP service. The starting IP address for the DHCP servers IP assignment. The ending IP address for the DHCP servers IP assignment. The length of time for the DHCP lease. Used to allow the DHCP server to assign the same IP adress to a specic MAC address. Enter the name, IP address, and MAC address into the elds. Select which DHCP client to clone. The name to be used to reference the specic static DHCP client. The MAC address of the static DHCP client. Drop down list of all currently connected DHCP clients. Lists the DHCP clients connected to the DI-614+. Click Refresh to update the list. The table will show the Host Name, IP Address, and MAC Address of the DHCP client computer. 24
Name MAC Address DHCP Client DHCP Clients List
Advanced > Virtual Server
The DI-614+ can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-614+ rewall feature lters out unrecognized packets to protect your LAN network so all computers networked with the DI-614+ are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-614+ redirects the external service request to the appropriate server within the LAN network.
Enable Name Private IP Protocol Type Private/ Public Ports Schedule
Select to activate the policy. You can name the Virtual Server. The IP address of the internal computer that will be using the virtual service. Select the protocol the Virtual Server will use. Enter in the private and public port or ports to be used. A range of ports can be specied with a hyphen. (e.g., 20-21) Select Always, or choose From and enter the time period during which the virtual service will be available. 25
Advanced > Applications
Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications have difculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-614+. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger eld, then enter the public ports associated with the trigger port into the Incoming Ports eld. At the bottom of the screen, there are already dened special applications. To use them, select one from the drop down list and select an ID number you want to use. Then click the Copy to button and the router will ll in the appropriate information to the list. You will then need to enable the service. If the mechanism of Special Applications fails to make an application work, try using DMZ host instead. Note! Only one PC can use each Special Application tunnel. Enabled or Select to activate or deactivate the policy.

Advanced > Firewall

Firewall Rules is an advance feature used to deny or allow trafc from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the device. Enabled or Disabled Click Enabled to apply the lter policy or click Disabled to enter an inactive lter policy (You can reactivate the policy later). Name Enter the name of the Firewall Rule. Action Select Allow or Deny to allow or deny trafc to pass through the DI-614+. Interface Source Choose between a LAN or WAN source. An asterisk signies the selection of both sources. Interface Destination Choose between a LAN or WAN destination. An asterisk signies the selection of both destinations. IP Start The starting IP address for the lter policy. Leaving the eld blank selects all IPs. IP End The ending IP address for the lter policy. Leaving the eld blank sleects all IPs.
Advanced > Firewall (Continued)
Protocol Select one of the following protocols: TCP, UDP, or ICMP. Port Range Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single port that you want the policy applied to, then enter the port number in the Start Port eld and leave the End Port eld blank. If you want to use all the ports, you can leave the port range empty. Schedule Select Always, or choose From and enter the time period during which the virtual service will be available

Advanced > DMZ

If you have a computer that cannot run Internet applications properly from behind the DI-614+, then you can allow that computer to have unrestricted Internet access. Enter the IP address of that computer as a DMZ (Demilitarized Zone) host with unrestricted Internet access. Adding a client to the DMZ may expose that computer to a variety of security risks, so only use this option as a last resort.
Advanced > Performance

Beacon Interval

Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. (Delivery Trafc Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Select the data rate. Default is 1-2-5.5-11-22Mbps. Select the data rate. Default is 1-2-5.5-11-22Mbps. Long preamble is the default setting. (High trafc networks should use the shorter preamble type.) The preamble denes the length of the CRC block used in communication between the Access Point and the roaming wireless Network adapters.(Cyclic Redundancy Check is a common technique for detecting data transmission errors)

DTIM interval

Basic Rates TX Rates Preamble Type
Advanced > Performance (Continued)

SSID Broadcast

Enabled is the default setting. Choose Enabled to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identier) to establish communication. Choose Disabled if you do not wish to broadcast the SSID over the network. The DI-614+ has the option to adjust its wireless transmit power. Limiting transmit power can help in situations where you do not want the same signals overlapping one another. Select Internal Antenna, External Antenna, or Diversity Antenna. In this mode, the DI-614+ only uses the internal antenna for short distance coverage. In this mode, the DI-614+ only uses the external antenna and extends wireless coverage. In this mode, the DI-614+ uses both the internal and external antenna and then uses the antenna that picks up the strongest signal. 4x Mode allows for higher speed wireless performance. Only other devices that support 4x Mode will be able to take advantage of the higher performance.
Antenna transmit power Antenna Selection
Internal External Diversity

4X Mode

Tools> Admin
There are two accounts that can access the Broadband Routers Web-Management interface. They are admin and user. Admin has read/write access while user has readonly access. User can only view the settings but cannot make any changes. It is recommended that you change the admin password from the default setting. The default password is blank (no password). Password Remote Management To change the admin and user passwords, enter in the old password, and enter the new password twice to conrm. Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. A username and password is still required to access the browser-based management interface. Internet IP Address of the computer that has access to the DI-614+. If the IP Address is set to 0.0.0.0, this allows all Internet IP addresses to access the DI-614+. The port number used to access the DI-614+. E.g., http://x.x.x.x:80, where x.x.x.x. is the WAN IP address of the DI-614+ and 80 is the port used for the Web Management interface.

Tools> Time

Set the time here by entering it manually or by using NTP (Network Time Protocol.) NTP is a standard protocol on the Internet that sychronizes the time settings accurately for all the computers on your network. Time Zone Daylight Saving Select your time zone from the pull-down menu. Select to enable or disable Daylight Saving. If you choose to enable this, enter the start and end date and the system time will automatically adjust on those dates (Optional.) If you are enabling NTP to synchronize the time settings on your network using an NTP server, please enter the link to the default server. If you are entering the time manually, select the correct Year, Month, Day, Hour, Minute, and Second.

Default NTP Server

Set Device Date and Time

Tools > System

The current system settings can be saved as a le onto the local hard drive. The saved le or any other saved setting le created by the DI-614+ can be uploaded to the unit. To reload a system settings le, click on Browse to search the local hard drive for the le to be used. The device can also be reset back to factory default settings by clicking on the Reset to Default button. Use the restore feature only if necessary. This will erase previously saved settings for the unit. Make sure to save your system settings to the hard drive before doing a factory restore. Save Settings to Local Hard Drive Load Settings from Local Hard Drive Restore to Factory Default Settings Click Backup Setting to save the current settings to the local Hard Drive. Click Browse to nd the settings le, then click Load. Click Reset to Default to restore the factory default settings.

Tools > Firmware

You can upgrade the rmware by using this tool. First, check the D-Link support site for rmware updates at http://support.dlink.com. Make sure that the rmware you want to use is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the rmware that you downloaded from the D-Link website to be used for the update. Upgrading the rmware will not change any of your system settings but it is recommended that you save your system settings before doing a rmware upgrade.

Browse

After you have downloaded the new rmware, click Browse in this window to locate the rmware update on your hard drive. Click Apply to complete the rmware upgrade.
Note: Do not power off the unit when it is being upgraded. When the upgrade is complete, the unit will automatically restart.

Tools >DDNS

DDNS (Dynamic Domain Name System) keeps dynamic IP addresses (e.g., IP addresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-614+. DDNS When an IP address is automatically assigned by a DHCP server, DDNS automatically updates the DNS server. Select Disabled or Enabled. Select from the pull-down menu. Enter the Host name. Enter the username. Enter the password.

Server Address Host Name Username Password

Tools > Misc

Tools > Misc (Continued) Ping Test
This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packets and listens for replies from the specic host. Click reboot to restart the unit. Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-614+ when it is being pinged. This may help to increase security. Universal Plug and Play is a feature that is preset to allow certain popular applications such as MSN messenger to be functional using the router without making any congurations. By default UPnP setting is set to enable. It is recommended to keep UPnP Setting on enable. Click Enable to enable Gaming Mode. This feature allows many online games to work with the DI-614+. For users who telecommute or use Virtual Private Network (VPN), you can select PPTP or IPSec to be used with this router. This option allows the user to select 10Mbps, 100 Mbps, or 10/100Mbps Auto for the WAN port. You may need to change the WAN port speed if you are experiencing connection problems with your Cable or DSL modem.
Restart Device Block WAN Ping UPnP Setting

Gaming Mode

VPN Pass Through
WAN select to 10/100 Mbps

Tools > Cable Test

Diagnostic Cable Tester is an advanced feature that integrates a LAN cable tester on every Ethernet port on the router. Through the graphical user interface (GUI), Cable Tester can be used to remotely diagnose and report cable faults such as opens, shorts, swaps, and impedance mismatch. The Cable Tester feature signicantly reduces service calls and returns by allowing users to easily troubleshoot their cable connections. Ports Link Status More Info The Ethernet port names associated to the physical ports. The current link status of the Ethernet cable connected to the respective Ethernet port. Click on More Info for detailed information about the cable link status. The following window will appear.

Refresh

Click on Refresh to run the cable test. Allow the router a few seconds to complete the test.

Status > Device Info

This screen displays information about the DI-614+. DHCP Release DHCP Renew Click to release IP addresses sent from the DHCP server. Click to renew IP addreses sent from the DHCP server.

Status > Log

This screen displays activities occurring on the DI-614+. First PageLast PagePreviousNextClearLog SettingsClick First Page to go to the rst page of the log. Click Last Page to go to the last page of the log. Click Previous to go to the previous page of the log. Click Next to go to the next page of the log. Click Clear to clear the log. Click for advanced features (see next page.)

Status > Log > Log Settings
E-Mail Alert SMTP Server IP Email Address Send Mail Now Save Log File to Local Hard Drive Log Type
The DI-614+ can be set up to send the log les to a specic email address. Enter in the IP address of the mail server. Enter in the email address of the recipient who will receive the email log. Click to send mail immediately. Selecting this allows you to save the log to a local hard drive. A window will appear prompting you to save the le to a specic location. Select the types of activity to log.

Status > Stats

In Stats section, trafc statistics are displayed. Refresh Reset WAN LAN WIRELESS This will update the page. This will reset the packet counter to zero. Displays Received / Transmitted packets from the WAN port. Displays Received / Transmitted packets from the LAN port. Displays received and transmitted packets from the wireless network.

Status > Wireless

The wireless client table displays a list of current connected wireless clients. This table also displays the time and MAC address of the wireless client connected.
This screen displays the complete Help menu. For help at anytime, click the Help tab in the Conguration menu.

Troubleshooting

This chapter provides solutions to problems that can occur during the installation and operation of the DI-614+ Wireless Access Point. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems.
(Note: It is recommended that you use an Ethernet connection to congure the DI-614+ Access Point.) 1. The computer used to congure the DI-614+ cannot access the Conguration menu.
Check that the Ethernet LED on the DI-614+ is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet Adapter is working properly. Please see item 6 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP Address is in the same range and subnet as the DI-614+. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual.
Note: The IP Address of the DI-614+ is 192.168.0.1. All the computers on the network must have a unique IP Address in the same range, e.g., 192.168.0.x. and a Subnet Mask of 255.255.255.0. Any computers that have identical IP Addresses will not be visible on the network.

To hard-reset the D-Link AirPlus DI-614+ to Factory Default Settings, please do the following:
Locate the Reset button on the back of the DI-614+. Use a paper clip to press the Reset button.
Hold for about 10 seconds and then release.
After the DI-614+ reboots (this may take a few minutes) it will be reset to the factory Default settings.

Networking Basics

Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, Me or 98. Go to Start>Control Panel>Network Connections Select Set up a home or small ofce network
When this screen appears, Click Next.
Please follow all the instructions in this window:
Click Next. In the following window, select the description that best ts your computer. If your computer connects to the internet through a gateway/router, select the second option as shown.

Click Next.

Enter a Computer description and a Computer name (optional).
Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name.
Please wait while the Network Setup Wizard applies the changes.
When the changes are complete, click Next. Please wait while the Network Setup Wizard congures the computer. This may take a few minutes.
In the window below, select the option that ts your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next.
Insert a disk into the Floppy Disk Drive, in this case drive A.
Please read the information under Heres how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Please read the information on this screen, then click Finish to complete the Network Setup Wizard.

The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufcient detail to allow D-Link to conrm the same.
The original product owner must obtain a Return Material Authorization (RMA) number from the Authorized D-Link Service Ofce and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided. After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories.
The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (COD) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Links reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Links judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, rmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Ofce will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.

Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY
Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specic legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior notice. Copyright 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

doc1

Protect & Share Your Internet Connection
New Intergrated Cable Diagnostic Utility
Advanced Firewall & Parental Control Share Internet with Built-In 4-port Switch Easy Installation
D-Link, the industry pioneer in wireless networking, continues to offer performance breakthroughs in wireless connectivity. The D-Link AirPlus series of high-speed networking products is capable of wireless transfer rates up to 4 times that of standard 802.11b. In which means faster network processing and increased productivity. The AirPlus DI-614+ incorporates Texas Instruments enhanced 802.11b silicon chipset design, utilizing their patented Digital Signal Processing technology, as well as D-Link's own robust firewall security features. The Cable Diagnostic Utility feature is the latest utility included in the DI-614+ for diagnosing cable connection problems with the wired Ethernet cable. This feature can indicate to users which Ethernet cable connected to the router has problems, identifying where and what the problem is. The DI-614+ is ideal for those creating their first wireless network, as well as for more advanced users looking for additional management settings and policy-based content
filtering that can be set based on MAC address, IP address, URL and/or Domain Name. A simple yet intelligent, web-based setup wizard makes the DI-614+ easy for any user to quickly and securely connect computers to share a highspeed Internet connection, files, resources, games or just to communicate. An integrated 4-port switch allows direct connection of up to four computers. Several wireless clients can also securely connect to the network using 64, 128, or 256-bit encryption. Additional advanced features include pass-through of multiple concurrent IPSec and PPTP VPN sessions for telecommuters or for anyone who needs to transmit sensitive information more securely. The D-Link AirPlus DI-614+ is the ideal networking solution for small offices, home offices, schools, coffee shops and other small businesses that cater to the public.

SPECIFICATIONS

Standards IEEE 802.11b IEEE 802.3u

. IEEE 802.3

VPN Pass Through/Multi-Sessions PPTP L2TP IPSec Advanced Firewall Features (see table) Device Management Web-Based Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java- enabled browsers. Wireless Data Rates With Automatic Fallback 22Mbps 11Mbps 5.5Mbps 2Mbps 1Mbps
Modulation Techniques Barker (1Mbps/0db) Barker (2Mbps/3db) CCK (5.5Mbps/5.5db) PBCC (5.5 Mbps/1.5db) CCK (11Mbps/8.5db) PBCC (11Mbps/4.5db) PBCC (22Mbps/8.5db)
Wireless Transmit Power 15dBm 2dB External Antenna Type Detachable reverse SMA LEDs Power WAN Local Network 10/100 WLAN (Wireless Connection)
Operating Temperature 32F to 131F ( 0C to 55C) Humidity 95% maximum (non-condensing) Power Input Ext. Power Supply DC 5V, 2.5A Safety & Emissions FCC UL
Encryption 64/128/256-bit Media Access Control CSMA/CA with ACK Wireless Frequency Range 2.4GHz to 2.462GHz Wireless Operating Range Indoors: Up to 328 feet (100 meters) Outdoors: Up to 1,312 feet (400 meters) Wireless Modulation Technology PBCC - Packet Binary Convolutional Coding Direct Sequence Spread Spectrum (DSSS) 11-chip Barker sequence

Dimensions L = 7.5 inches (190.5mm) W = 4.6 inches (116.84mm) H = 1.375 inches (35mm) Weight ~2.0 lbs (907g) Warranty 3 Year

 

Technical specifications

Full description

D-Link, the industry pioneer in wireless networking, introduces another performance breakthrough in wireless connectivity - the D-Link AirPlus series of high-speed networking products capable of data transfer rates up to 22 Mbps. And with the new AirPlus DI-614+, D-Link once again sets a new standard for wireless broadband routers. The AirPlus DI-614+ combines the latest advancements in 802.11b silicon chip technology from Texas Instruments and robust firewall security features. The DI-614+ is ideal for those creating their first wireless network, as well as for more advanced users looking for additional management settings and policy-based content filtering. Filters can be set based on MAC address, IP address, URL and/or Domain Name. A simple yet intelligent, Web-based setup wizard makes the DI-614+ easy for any user to quickly and securely connect computers to share a high-speed Internet connection, files, resources, games or just to communicate. An integrated 4-port switch allows direct connection of up to four computers. Several wireless clients can also securely connect to the network using 64, 128, or 256-bit encryption. The D-Link AirPlus DI-614+ is the ideal networking solution for small offices, home offices, schools, coffee shops and other small businesses that cater to the public, or home offices, and dormrooms.

General
Device TypeWireless router - 4-port switch (integrated)
Enclosure TypeDesktop
Connectivity TechnologyWireless, wired
Data Link ProtocolEthernet, Fast Ethernet, IEEE 802.11b
Frequency Band2.4 GHz
Data Transfer Rate22 Mbps
Max Range Indoors330 ft
Max Range Open Space1310 ft
Network / Transport ProtocolTCP/IP, L2TP, IPSec
Remote Management ProtocolHTTP
Encryption AlgorithmRC4, 128-bit WEP, 256-bit WEP, 64-bit WEP
FeaturesFirewall protection, switching, DHCP support, NAT support, auto-correction of twisted-pair polarity reverse, VPN support, auto-negotiation
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.11b
Built-in DevicesLED panel
Status IndicatorsPort status, link activity, power
Line Properties
Line Coding FormatCCK, PBCC, QFSK
Expansion / Connectivity
InterfacesLAN : 4 x 10Base-T/100Base-TX - RJ-45 WAN : 1 x 10Base-T/100Base-TX - RJ-45
Power
Power DevicePower adapter - external
Compliant StandardsUL
Miscellaneous
Width6.5 in
Depth9.2 in
Height1.4 in
Weight2 lbs
Compliant StandardsFCC Class B certified
Manufacturer Warranty
Service & Support3 years warranty
Service & Support DetailsLimited warranty - parts and labor - 3 years
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature131 °F
Humidity Range Operating0 - 95%
Universal Product Identifiers
BrandD-Link Systems
Part NumberDI-614+
GTIN00790069244902, 00790069244872, 00790069244896

 

Tags

BH-212 CUV4xdls WF-7871TTP P1292RB SR-50 Driver W710I PRO 9000 All-IN-ONE Specs Default Password LX1200H L32A01A LD-80 F1245W PS42C450 EP-760 FL1001 Sata3 Raid Software Fighter Aqxxl 129 MF5750 FX-115ES KS-AX3300 YP-U5 XPS 420 32PF3320-10 ONE Deep ESF2440 APA4320 LDA-831 CN-DV2300N Exotica MA34 E-TEC 75 RMR182 SCD-XA5400ES UX-BS60 Impressa E65 YP-55V AF-S125PX AE280G1 SCD353 ES-8161 Trickster Firmware Focus 206 207 Vgn-fj270-B DCR-SR190E W6661 VP-MX10 21HT5404-01Z UE19C4000PW DES-1008F 775I945GZ L300D SP2014N-KIT Meter PNA 200S DCR-HC51E AD-F 800C MYW-8 Gstream Mobile Kohler K181 DV-585K-S HL-5050 750 4X4 DV220AEW XAA ECM-HGZ1 Review EW284 Elna 2800 1202vlzpro Software SA-HE70K MW24FM1 HVR-M15AP IC-AT100 AHD 200 TX-SA507 AE2790 MV5IMC Cndv-90MT SI-24 UB502 KX-TG1313EG Foretrex 201 RL40egsw Microcon RD 3000 KX-DT343 Bolex SM8 GR-P257STB CD-110 GA-8IG1000MK Hdrv200F DEH-1770 Firmware Download Reset 5100 S ML-1640 Fostex MR16 YP-U2Z DMC-LS80 Heidelberg CD50 FE-X41

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101