Office LAN

Media Converter with Individual Metal Case Housing.

DMC-1000 Chassis

Chassis-based Media Converters
System Overview The Chassis-based Media Converters include a number of independent media converters and a chassis capable of housing up to 16 media converters. You can start with single media converters, each equipped with its own housing and AC power adapter. When you requirements grow big, you can mount a chassis in your equipment rack and install your media converters in the chassis. The housing of each media converter can be easily removed, and the media converter PC board can be slid into the chassis. Chassis & Power Supply The chassis lets you install multiple media converters in an equipment rack together with the network devices for which they provide media conversion. This provides for space saving, and the cabling will look neat. The chassis comes with its own universal AC to DC power supply. For maximum power availability, an optional redundant power supply is available for installation in chassis. Media Converters Stand-alone or Installed in Chassis The media converters convert signals capable of transmission on one type of cable to signals capable of transmission on another type of cable. This allows you to Chassis Features 16 bays to house up to 16 media converters Front panel LEDs for bay and fan power status Standard 19-inch rack-mountable with, 2U height Non-stop operation & minimal downtime Allows hot-swapping of media converters Hot swappable redundant power supplies Cooling fans on back side (together with power supplies) Power redundancy & power isolation 1 universal internal AC to DC power supply provided Optional second AC to DC power supply for load-sharing purpose Media converter power isolation for electrical isolation from each bay connect longer distance fiber cables between devices that are designed only for shorter distance cables, such as the Cat. 5 twisted-pair cable. All media converters in this system come with their own solid metal case housing, LED status indicators and AC to DC power adapters. They can be used as stand-alone converters, or installed in the chassis. In case you install them in the chassis, you will remove their metal cases and slide in their PC boards into the chassis slots. The chassis's power supply will be used instead of the media converters' own AC to DC power adapters. All media converters are hot-swappable when used with the chassis. Media Conversion Solutions The following media conversion solutions are available: - Fast Ethernet twisted-pair to Fast Ethernet 100BASE-FX Fiber (single-mode and multi-mode) - Fast Ethernet 100BASE-FX fiber multi-mode to singlemode - 1000BASE-T Gigabit twisted pair to 1000BASE-SX and 1000BASE-LX Gigabit fiber For fiber cables, MT-RJ and SC types of connectors are supported.
Office LAN DMC-1000 Chassis
LED indicators - Power LED - Fan LED Dimensions 415 x 390 x 89 mm AC input - 100-240 VAC, 50/60Hz - Internal universal power supply Operation Temperature 0 - 40 C Storage Temperature -10 - 50 C Operation Humidity 10% - 90% Storage Humidity 5% - 90% Emission (EMI) - FCC class A - VCCI class A - CE Class A
DMC-300M, DMC-300SC Media Converters
These converters convert 10/100Mbps 10BASE-T/ 100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet multi-mode fiber signals. Maximum fiber cable distance is 2km. 1 RJ-45 twisted-pair port and 1 fiber port are provided. - DMC-300M: the fiber port on this media converter is the MT-RJ connector. - DMC-300SC: the fiber port on this media converter is the SC connector.

Media Converter Features

- One-channel media conversion between 10BASE-T/ 100BASE-TX and 100BASE-FX - Fiber MT-RJ or SC connector - Auto negotiation of speeds and duplex modes on twisted-pair port - Auto MDI-II and MDI-X - One slide switch for configuring fixed half/full duplex modes - Store-and-forward mechanism - Back-pressure & IEEE 802.3x Flow Control compliant - Full wire-speed forwarding rate - Front panel status LEDs - Can be used as a stand-alone device or with chassis - Hot-swappable when used with chassis

Ordering Information

Chassis-based Media Converter DMC-1000 Media Converter Chassis Optional Media Converter Modules DMC-300M Fast Ethernet Twisted-pair to Fast Ethernet Multi-mode Fiber (2km, MT-RJ) Media Converter Module DMC-300SC Fast Ethernet Twisted-pair to Fast Ethernet Multi-mode Fiber (2km, SC) Media Converter Module DMC-515SC Fast Ethernet Twisted-pair to Fast Ethernet Single-mode Fiber (15km, SC) Media Converter Module DMC-530SC Fast Ethernet Twisted-pair to Fast Ethernet Single-mode Fiber (30km, SC) Media Converter Module DMC-560SC Fast Ethernet Twisted-pair to Fast Ethernet Single-mode Fiber (60km, SC) Media Converter Module DMC-615SC Fast Ethernet Multi-mode Fiber (2km SC) to Fast Ethernet Single-mode Fiber (15km, SC) Media Converter Module DMC-700SC 1000BASE-T Gigabit Twisted-pair to 1000BASE-SX Gigabit Fiber Multi-mode Fiber (550m, SC) Media Converter Module DMC-810SC 1000BASE-T Gigabit Twisted-pair to 1000BASE-LX Gigabit Fiber Single-mode Fiber (10km, SC) Media Converter Module Optional Redundant Power Supply DMC-1001 Redundant Power Supply

Technical Specifications

LED Indicators - Power - 100Mbps Speed (for twisted-pair port) - Full Duplex/Collision (for twisted-pair and fiber ports) - LINK/ACT (for twisted-pair port) Housing Dimensions 120 x 88 x 25 mm Power Input - 7.5V 1.5A - Through external AC power adapter Operation Temperature 0 - 40 C Storage Temperature -25 - 70 C Humidity 10 ~ 90% non-condensing Emission (EMI) - FCC Class B - VCCI Class B - CE Class B - C-Tick
DMC-515SC, DMC-530SC, DMC-560SC Media Converters
These converters convert 10/100Mbps 10BASE-T/100BASETX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals. Maximum fiber cable distance is 15 - 60 km. 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided. - DMC-515SC: this media converter supports maximum 15km fiber cable distance. - DMC-530SC: this media converter supports maximum 30km fiber cable distance. - DMC-560SC: this media converter supports maximum 60km fiber cable distance.
DMC-615SC Media Converter
This converter converts 100BASE-FX Fast Ethernet multi-mode fiber signals to 100BASE-FX Fast Ethernet single-mode fiber signals. Maximum fiber cable distance is 15km. 2 fiber ports (SC connectors) are provided.
- One-channel media conversion between 100BASE-FX multi-mode to 100BASE-FX single-mode fiber - 2 fiber SC connectors - Store-and-forward mechanism - Full wire-speed forwarding rate - Front panel status LEDs - Can be used as a stand-alone device or with chassis - Hot-swappable when used with chassis

One-channel media conversion between 10BASET/100BASE-TX and 100BASE-FX Fiber SC connector Auto negotiation of speeds and duplex modes on twisted-pair port Auto MDI-II and MDI-X One slide switch for configuring fixed half/full duplex modes Store-and-forward mechanism Back-pressure & IEEE 802.3x Flow Control compliant Full wire-speed forwarding rate Front panel status LEDs Can be used as a stand-alone device or with chassis Hot-swappable when used with chassis
LED Indicators - Power - LINK-1 - LINK-2 Dimensions 120 x 88 x 25 mm Power Input - 7.5V 1.5A - Through external AC power adapter Operation Temperature 0 - 40 C Storage Temperature -25 - 70 C Humidity 10 ~ 90% non-condensing Emission (EMI) - FCC Class B - VCCI Class B - CE Class B - C-Tick
LED Indicators - Power - 100Mbps Speed (for twisted-pair port) - Full Duplex/Collision (for twisted-pair and fiber ports) - LINK/ACT (for twisted-pair port) Dimensions 120 x 88 x 25 mm Power Input - 7.5V 1.5A - Through external AC power adapter Operation Temperature 0 - 40 C Storage Temperature -25 - 70 C Humidity 10 ~ 90% non-condensing Emission (EMI) - FCC Class B - VCCI Class B - CE Class B - C-Tick
DMC-700SC, DMC-810SC Media Converters
DMC-700SC Media Converter: This converter converts 1000BASE-T Gigabit twisted-pair signals to 1000BASE-SX Gigabit multi-mode fiber signals. Maximum fiber cable distance is 550m. 1 RJ-45 twisted-pair port and 1 fiber port (SC type connector) are provided. DMC-810SC Media Converter: This converter converts 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fiber signals. Maximum fiber cable distance is 10km. 1 RJ-45 port and 1 fiber port (SC type connector) are provided.
- One-channel media conversion between 1000BASE-T and 1000BASE-SX/LX - Auto negotiation of duplex mode on twisted-pair port - Auto MDI-II/MDI-X for twisted-pair port - Full wire-speed forwarding rate - Front panel status LEDs - Can be used as a stand-alone device or with chassis - Hot-swappable when used with chassis
LED Indicators - Power (PWR) - LINK/ACT - Housing Dimensions - 120 x 88 x 25 mm Power Input - 7.5V 1.5A - Through external AC power adapter Operating Temperature 0 - 40 C Storage Temperature -25 - 70 C Humidity 10 ~ 90% non-condensing Emission (EMI) - FCC Class B - VCCI Class B - CE Class B - C-Tick

geprufte Sicherheit

ERAL COM ED

CA UNI TION M

M M I SS IO
Specifications subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors.

RECYCLABLE

Rev. 01 (Jan. 2002) Printed in Taiwan
U.S.A. TEL: 1-949-788-0805 Canada TEL: 1-905-8295033 Europe TEL: 44-20-8731-5555 U.K. TEL: 44-20-8731-5555 Germany TEL: 49-6196-77990 France TEL: 33-1-30238688 Benelux TEL: 31-40-2668713 Italy TEL: 39-02-2900-0676 Iberia TEL: 34-93-4090770 Sweden TEL: 46-(0)8564-61900 Norway TEL: 47-22-991890 Denmark TEL: 45-43-969040 Finland TEL: 358-9-622-91660 Singapore TEL: 65-774-6233 Australia TEL: 61-2-94177100 Japan TEL: 81-3-5434-9678 China TEL: 86-10-8809-7777 India TEL: 91-22-652-6696 Middle East TEL: 202-6356176 South America TEL: 56-2-232-3185 South Africa TEL: 27(0)126652165 Russia TEL: 7-095-737-3389 Taiwan TEL: 886-2-2910-2626 D-Link Corp. TEL: 886-2-2916-1600
FAX: 1-949-753-7033 www.dlink.com FAX: 1-905-8295095 www.dlink.ca FAX: 44-20-8731-5511 www.dlink.co.uk FAX: 44-20-8731-5511 www.dlink.co.uk FAX: 49-6196-7799300 www.dlink.de FAX: 33-1-30238689 www.dlink-france.fr FAX: 31-40-2668666 www.dlink-benelux.nl FAX: 39-02-2900-1723 www.dlink.it FAX: 34-93-4910795 www.dlinkiberia.es FAX: 46-(0)8564-61901 www.dlink.se FAX: 47-22-207039 FAX: 45-43-424347 www.dlink.dk FAX: 358-9-622-91661 www.dlink-fi.com FAX: 65-774-6322 www.dlink-intl.com FAX: 61-2-94171077 www.dlink.com.au FAX: 81-3-5434-9868 www.dlink.co.jp FAX: 86-10-8809-6789 FAX: 91-22-652-8914 www.dlink-india.com FAX: 202-6356192 www.dlink-me.com FAX: 56-2-232-0923 www.dlink.cl FAX: 27(0)126652186 www.d-link.co.za FAX: 7-095-737-3390 www.dlink.ru FAX: 886-2-2910-1515 www.dlinktw.com.tw FAX: 886-2-2914-6299 www.dlink.com.tw

Gigabit Media Converter

Copper Gigabit to Fiber Gigabit
1000BASE-T to 1000BASE-LX Signal Conversion Up to 15 km Single-Mode Fiber Cable Distance Single Fiber Strand for Transmission/Reception Minimal Reflection, No Budget Loss

FEATURES

1000BASE-T to 1000BASE-LX Signal Conversion Up to 15 km Single-Mode Fiber Cable Distance Single Fiber Strand for Transmission/Reception Full Duplex operation 802.3x Flow Control Support Manageable Through Intelligent Chassis System LLR (Enable/Disable), Fiber (AutoNegotiation/Manual) Functions Installable as Stand-Alone Device or in Rack-Mount Chassis
he D-Link DMC-1910 Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals. This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twistedpair cable. The DMC-1910 media converter combines transmitting and receiving signals onto one fiber strand using two wavelengths. This design avoids the budget losses incurred by the singlewavelength single-fiber technology, and minimizes any possibility of reflections in the system. The DMC-1910 consists of two units. One unit uses one wavelength to transmit and a second wavelength to receive, while the other flips that relationship. Two different types of transmitting wavelength are supported: one WDM bi-directional wavelength for both transmission and reception. Both units of the DMC-1910 media converter are encased in a solid metal housing with LED status indicators. The DMC-1910 can be used as stand-alone converter, or installed in a DMC-1000 chassis. In case you install it in the chassis, you will remove the metal cases of the two units and slide in their PC boards into the chassis slots. The chassis's power supply will be used instead of the media converters' own AC to DC power adapter. The media converter is hot swappable when used with the chassis.

DMC-1910

Product Specifications
Standards 802.3ab 1000BASE-T 802.3z 1000BASE-LX Conversion Scheme Pair of one-channel single-mode fiber media conversion between 1000BASE-T and 1000BASE-LX Wavelength 2 different types of transmitting wavelength 1 wavelength with WDM bi-directional for both transmit and receive DMC-1910R: TX: 1310 micron; RX: 1550 micron DMC-1910T: TX: 1550 micron; RX: 1310 micron Connectors 1000BASE-T: RJ-45 connector 1000BASE-LX: LC connector Cables 1000BASE-T: Cat. 5 twisted-pair cable (up to 100 m) 1000BASE-LX: single-mode fiber cable (up to 15 km) Full Duplex Full-duplex mode support on 1000BASE-T Gigabit port Auto MDI/MDIX Auto MDI/MDIX on 1000BASE-T port Transmission Method Store-and-forward mechanism Flow Control Back-pressure & IEEE 802.3x compliant flow control Forwarding Rate Full wire-speed forwarding rate Installation Methods Stand-alone device Installable module in DMC-1000 chassis Hot Swap Hot-swappable when installed in DMC-1000 chassis Management Through DMC-1000 chassis with DMC-1002 management module installed Management Functions LLR (Enable/Disable) Fiber (Auto-Negotiation/Manual)
Physical & Environmental
Power Supply Operating Humidity Through AC power adapters (when used as stand-alone device) 10 to 90%, non-condensing Power Consumption 5.5 Watts(max.)(for each DMC-1910R and DMC-1910T unit) Operating Temperature 0o to 40oC (32 oto 104oF) Storage Temperature -10oto 70oC (-26oto 158oF) Dimensions 120 (L) 88 (W) 25 (H) mm (for both DMC-1910R and DMC-1910T units) EMI FCC Class B VCCI Class B CE Class B C-Tick Box Includes DMC-1910R unit DMC-1910T unit 2 AC power adapters User's Manual Quick Installation Guide

D-Link Worldwide Offices

U.S.A. Canada Europe (U. K.) Germany France Netherlands Belgium Italy Sweden Denmark Norway Finland Spain Portugal Czech Republic Switzerland Greece TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: 1-800-326-1688 1-905-8295033 44-20-8731-5555 49-6196-77990 33-1-30238688 31-10-282-1445 32(0)2-517-7111 39-02-2900-0676 46-(0)8564-61900 45-43-969040 47-99-300-100 358-9-34-93-4090770 351-21-8688493 420-(603)-276-589 41-(0)-1-832-11-00 30-210-FAX: 1-866-743-4905 FAX: 1-905-8295223 FAX: 44-20-8731-5511 FAX: 49-6196-7799300 FAX: 33-1-30238689 FAX: 31-10-282-1331 FAX: 32(0)2-517-6500 FAX: 39-02-2900-1723 FAX: 46-(0)8564-61901 FAX: 45-43-424347 FAX: 47-22-309580 FAX: 358-9-2707-5081 FAX: 34-93-4910795

Luxemburg Poland Hungary Singapore Australia India Middle East (Dubai) Turkey Egypt Israel LatinAmerica Brazil South Africa Russia China Taiwan Headquarters TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: 32-(0)2-517-7111 48-(0)-22-583-92-75 36-(0)-1-461-30-00 65-6774-6233 61-2-8899-1800 91-022-26526696 971-4-3916480 90-212-289-56-59 202-414-4295 972-9-9715700 56-2-232-3185 55-11-218-59300 27-12-665-2165 7-095-744-0099 86-10-58635800 886-2-6600-0123 886-2-2916-1600 FAX: 32-(0)2-517-6500 FAX: 48-(0)-22-583-92-76 FAX: 36-(0)-1-461-30-09 FAX: 65-6774-6322 FAX: 61-2-8899-1868 FAX: 91-022-26528914 FAX: 971-4-3908881 FAX: 90-212-289-76-06 FAX: 202-415-6704 FAX: 972-9-9715601 FAX: 56-2-232-0923 FAX: 55-11-218-59322 FAX: 27-12-665-2186 FAX: 7-095-744-0099 #350 FAX: 86-10-58635799 FAX: 886-2-6600-1188 FAX: 886-2-2914-6299
FAX: 41(0)-1-832-11-01 FAX: 30-210-9916902

Rev. 02 (Aug. 2005)

Specifications subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors.