1. Is the D-Link DSL-504T ADSL 2/2+ compatible? Yes it is compliant with ADSL2/2+. 2. What do I do if I cant connect? There are a couple of things to try if the modem does not connect. a) Check the ADSL light on the modem is on. If not, ensure that the modem is correctly plugged into the phone line, and unplug all filters, phones faxes, etc. Retry connecting. b) Check all physical connections are firmly in place. c) Factory reset the modem (push the button on the back of the modem, using a paperclip or pen), and check all the settings. 3. I am receiving an incorrect username/password message. Your username and password is case sensitive so make sure its in lower case. eg. Username should be- username@dodo.com.au 4. Can I use the DSL-504T on my Mac? Yes, the DSL-504T is compatible with all Macs and PCs so long as they have an Ethernet connection. 5. Is the D-Link DSL504T Windows Vista compatible? Yes it is. 6. When do I connect the modem? Plug the modem in first before running through the Setup Wizard. 7. Does the modem have security built in to it? Even though it is always very wise to have a software firewall on your computer the DSL 504T also provides advanced security features to help protect you on the Internet. 8. Can I use the DSL-504T for online gaming? Yes, and you can even plug in your PS2 or Xbox via the Ethernet connection, if your gaming console is fitted for Online Gaming. Please refer to your console manufacturer for more information. 9. Can I use the default settings in the Setup Wizard? No you cannot, as the settings that are used for the connection is specific to your ISP. Without these specific settings you will not be able to connect. See the Settings Section in this booklet. 10. Can I use my broadband with more than one computer at the same time with the DSL- 504T? Yes, you certainly can. Please refer to the modem manufacturer for more information.
D-Link DSL-504T Configuration Guide
Welcome to your Dodo Broadband Service! The Benefits of being with Dodo.
Thank you for choosing Dodo as your broadband provider. We hope that you will enjoy your new broadband service and the many different products and services that Dodo can provide. Some of the great benefits of Dodo Broadband are: 30 personal E-mail addresses 10MB of personal webspace Access to your Dodo email anywhere in the world through our web mail service 24/7 Technical Support on or via e-mail to customersupport@dodo.com.au Our extensive online Support Library at http://support.dodo.com.au Information on our Anti Virus and Anti Spam products.
Dodos Account Management System
One of Dodos most useful services is our on-line Account Management system, which allows you to control many features of your account, including; Update your contact details Check and change billing details Change your Passwords Check your Invoice History Check your Usage History Check your ADSL Status Pay bills online with POLiPay Update E-mail and Web Settings Sign up for Dodo E-mail Subscriptions You will nd the Account Management system at our Dodo Members website http://home.dodo.com.au
Important information about your Internet Service
It is important that you understand that all Dodo plans are subject to our Terms and Conditions, incorporating our Acceptable Use Policy. These can be viewed at http://www.dodo.com.au/terms.htm. Our Privacy Policy is also available at http://home.dodo.com.au/privacy.htm Please note: We will send all important e-mails to your Dodo e-mail account. If you wish to use another e-mail account, you can arrange to forward any mail to another address via the online Account Management system or through our Customer Service team. Once again, welcome to your new Dodo Broadband Service.
If you require further assistance visit our comprehensive online FAQ at: http://support.dodo.com.au Alternatively you can contact our support team on: Or contact Dodo via email : customersupport@dodo.com.au
* Whenever you see username in this guide replace it with the username you chose on signup. * For Vista users please ensure you have downloaded the latest DSL 504T drivers from the D-Link website.

D-Link DSL-504T Configuration
1. First, connect the power adapter to the power input at the back panel of the DSL-504T, and then plug the other end of the power adapter to a wall outlet. Press the On/Off button. On the front of the device, the Power LED will turn ON to indicate proper operation. 2. Insert one end of the Ethernet cable into the Ethernet port on the back panel of the DSL-504T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer. 3. Insert the telephone cable included with the router into the ADSL port, and then connect the cable to your telephone line. (Line must be activated for ADSL use) 5. Choose PPPoE / PPPoA, click Next. 6. Enter the following settings: Username: username@dodo.com.au Password: Your chosen password Connection type: PPPoE LLC Click Next. 7. Click Restart to save settings and restart the modem.
Connecting a Central Filter
This filter is used when you need to plug a phone and the ADSL modem on the same phone line. There are 3 ports on the central filter, they are as follows: Line - This port connects to the wall jack. ADSL This port connects to the modem. Phone This port connects to a telephone or other telephone device.
1. Open a web browser and type in http://10.1.1.1, hit Enter. The login box will appear, type in admin for both the username and password. Click OK.
2. Click Run Wizard to begin setup.
This filter is used on all phones, fax lines etc, never with the ADSL modem. An Inline Filter is placed between the phone and the wall jack. These are never attached between the ADSL modem and the wall jack, they are strictly used to filter any other phones or faxes etc that are in the premises.
Connecting an Inline Filter

3. Click Next to start.

4. Choose your time zone,
Dodo E-mail Setup in Outlook Express
Setting Up the Dodo Homepage in Internet Explorer
1. Open Internet Explorer.
2. Click on the Tools menu and click on Internet Options.
1. Open Outlook Express program. Click on Tools and then click on Accounts.
2. Click on the Add button and select Mail.
3. In the General Tab, click in the address bar under the Home Page heading and type in http://home.dodo.com.au 4. Click OK
3. Enter your name into the Display Name box and click Next.
4. Enter your Dodo email address into the email address click Next. This is your username you selected on signup followed by @dodo.com.au.

smtp.dodo.com.au

Home Phone ADSL
6. For Account name enter your username, for Password enter your password, then select Remember password and click Next. Then click Finish

unt disco

5. Select POP3 as My Incoming Mail Server. and enter the settings above, click Next.
Visit www.dodo.com.au for more details.

With Starter Pack

/30sec
Why pay full price for broadband?
By signing up to Dodo Home Phone, you'll qualify for a discount on your Dodo Broadband.

unt isco d

7pm to 7am - 7 days per week
To Dodo Pre-paid and all Vodafone customers

Limits Apply

# 25c flagfall

Password

WAN Setting / Connection Type
The Setup Wizard can be used to configure the Internet connection for most users. Note

Page 6 of 96

Information you will need about your DSL-504T ADSL 2+ Router:
Username This is the Username needed access the Routers management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is admin. The user cannot change this. This is the Password you will be prompted to enter when you access the Routers management interface. The default Password is admin. The user may change this. This is the IP address you will enter into the Address field of your web browser to access the Routers configuration graphical user interface (GUI) using a web browser. The default IP address is 10.1.1.1. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled. This is the subnet mask used by the DSL-504T, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later. Record info here
LAN IP addresses for the DSL-504T
LAN Subnet Mask for the DSL-504T
Information you will need about your LAN or computer:
Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-504T to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-504T to connect to other computer or Ethernet devices. Your DSL-504T ADSL 2+ Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DSL-504T will assign are from 10.1.1.2 to 10.1.1.254. Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as DHCP clients.) Record info here

DHCP Client status

It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-504T ADSL 2+ Router.

Page 7 of 96

Introduction
This section provides a brief description of the Router, its associated technologies, and a list of Router features.
Router Description and Operation
The DSL-504T ADSL2+ Modem Router is designed to provide connectivity for your private Ethernet LAN to the Internet via an ADSL connection. The Router is easy to install and use. Standard Ethernet ports are used to connect to computer or other Ethernet devices.

Enter Username and Password You should change the web-based manager access user name and password once you have verified that a connection can be established. The user name and password allows any PC within the same subnet as the Router to access the web-based manger.
The user name and password used to access the web-based manager is NOT the same as the ADSL account user name and password needed for PPPoE/PPPoA connections to access the Internet.

Page 15 of 96

Configure the Router
When you successfully connect to the web manager, the Home directory tab will display the Setup Wizard window. You can launch the Setup Wizard from this page or use the buttons located in the left panel of the web page to view other windows used for basic configuration.
Click on a directory tab to view the options available in that directory
Click on a button to use or view the window
Click the Run Wizard button to launch the Setup Wizard
Web Manager First Time Log On All configuration and management of the Router is done using the web-based management interface pictured in the above example. The configuration windows are accessed by clicking on the directory tabs: Home, Advanced, Tools, Status, and Help. Each tab has associated window buttons in the left hand panel of the web interface. Basic setup of the Router can be completed in the windows accessed from the Home directory including: (Setup) Wizard, Wireless (to configure the Wireless LAN), WAN (Internet), LAN (to configure the IP address of the Router) DHCP, DNS and Dynamic DNS.

Page 16 of 96

Wizard
To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the instructions in the pop-up window that appears. The initial window summarizes the setup process. Click the Next button to proceed. You may stop using the Setup Wizard at any time by clicking the Exit button. If you exit the wizard you will return to the Setup Wizard window without saving any of the settings changed during the process.

Page 21 of 96

Using the Setup Wizard - For Static IP Address connections:
1. Select the specific Connection Type from the drop-down menu. The available Static IP Address connection and encapsulation types are 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC, 1483 Routed IP VC-Mux and IPoA. Change the IP Address, Subnet Mask, ISP Gateway Address, Primary DNS Address, and Secondary DNS Server IP Address as instructed by your ISP. For IPoA connections it may also be necessary to change the ARP Server Address. IPoA connection users who have not been given this information should leave the field blank. If you are instructed to change the VPI or VCI number, type in the correct setting in the available entry fields. Most users will not need to change these settings. The Internet connection cannot function if these values are incorrect. Click Next to go to the next window and complete the Setup Wizard.

Page 22 of 96

Using the Setup Wizard - For Bridge Mode connections:
1. 2. Select the specific Connection Type from the drop-down menu. The available Bridge Mode connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux. If you are instructed to change the VPI or VCI number, type in the correct setting in the available entry fields. Most users will not need to change these settings. The Internet connection cannot function if these values are incorrect. Click Next to go to the next window and complete the Setup Wizard.

Page 23 of 96

Using the Setup Wizard - Finish and Restart
Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the Restart button to save the new configuration settings and restart the Router. If you need to change settings from a previous window, click the Back button.
Do not turn the Router off while it is restarting. After the Router is finished restarting, you are now ready to continue to configure the Router as desired. You may want to test the WAN connection by accessing the Internet with your browser.

Page 24 of 96

To configure the Routers basic configuration settings without running the Setup Wizard, you can access the windows used to configure WAN, LAN, DHCP, and DNS settings directly from the Home directory. To access the WAN Settings window, click on the WAN link button on the left side of the first window that appears when you successfully access the web manager.

PPPoE/PPPoA

Follow the instructions below to configure the Router to use a PPPoE or PPPoA for the Internet connection. Make sure you have all the necessary information before you configure the WAN connection. Most users will only need to change some or all of the settings listed under PPPoE/PPPoA and Connection Setting heading in the WAN settings menu. This area is contained within the red square in the example to the right. An enlarged view of this section can be seen on the next page followed by step-by-step instructions on how to configure WAN settings for a PPPoE or PPPoA connection.

19. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection. Page 26 of 96 www.dlink.com.au
DSL-504T Generation II ADSL2+ Modem Router Additional settings for PPPoE/PPPoA connections:

PPPoE/PPPoA Parameters

User Name

Description

For PPP connections, a User Name and Password are used to identify and verify your account to the ISP. Enter the User Name for your ADSL service account. User names and passwords are case-sensitive, so enter this information exactly as given to you by your ISP. Together with the User Name, this is used to verify your account to the ISP. Enter the Password exactly as given to you by your ISP. This specifies the protocol (PPPoE or PPPoA) and the encapsulation method (LLC or VCMux) used for your connection. The options available are PPPoE LLC, PPPoA LLC or PPPoA VC-Mux. The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface. The default setting (1400 bytes) should be suitable for most users. Some user may want to adjust the setting to optimize performance for wireless traffic or when low latency is desired (such as with Internet gaming). It is highly recommended that the user research how adjusting the MTU may effect network traffic for better or worse. Similar to the MTU, except this applies to Maximum Received Unit size for downloading data. Most users will be happy with the default setting (1492 bytes). However this may also be optimized for fast downloads of general bulk Internet traffic, for low latency or for downloading to computers on the Wireless LAN. As with the MTU setting, the user should carefully consider how changing the MRU may affect Internet downloads for all systems on your LAN. When this is enabled, the Router will be considered to be the primary gateway to the Internet and WAN for systems on your network. If you are using the Router on a network with one or more alternative gateway routers, you may prefer to disable this if you will use another router as the primary gateway. This feature enables the Router to allow a dial-up or separate bridged PPP connection to an individual PC. In this instance the Router will serve as a bridge. Network Address Translation may be enabled or disabled with the pull-down menu. Keep in mind that disabling NAT allows only a single computer to be used for Internet access through the Router. NAT is enabled and disabled for the Router on all connections (i.e. Pvc0 Pvc7) if your Router is set up for multiple virtual connections. Use this to universally enable or disable the Firewall and Filter features available in the Router. If you disable this you will not be able to configure settings in the Firewall Configuration window or Filters window in the Advanced directory. This is used to determine how global IP settings are handled for the WAN interface. Typically PPPoE or PPPoA connections will use the default setting for Dynamic IP. Some users will be given a specific IP address for the WAN interface. In this case you need to change this setting to Static IP. When Static IP is selected in the IP Control menu, you need to type in the global IP address provided to you by your ISP. The IP Unnumbered option is used if you want to set up a non-TCP/IP port protocol link through the WAN interface. An IP Unnumbered interface does not have an IP address and therefore cannot be managed via Telnet or any other TCP/IP application. If you have selected the Static IP option in the IP Control menu, type in the global IP address used for your WAN interface. Your ISP should provide this IP address to you. Select the desired option: Always ON, Connection On Demand, or Manual. Most users will want to choose the default connection setting, Always ON.

Management IP window To change the LAN IP Address or Subnet Mask, type in the desired values and click the Apply button. Your web browser should automatically be redirected to the new IP address. You will asked to login again to the Routers web manager.

Page 38 of 96

The DHCP server is enabled by default for the Routers Ethernet LAN interface. DHCP service will supply IP settings to workstations configured to automatically obtain IP settings that are connected to the Router though the Ethernet port. When the Router is used for DHCP it becomes the default gateway for DHCP client connected to it. Keep in mind that if you change the IP address of the Router the range of IP addresses in the pool used for DHCP on the LAN will also be changed. The IP address pool can be up to 253 IP addresses.
DHCP Settings window To display the DHCP Settings window, click the DHCP button in the Home directory. Any active DHCP Clients appear at the bottom of the window in the DHCP Clients List. The IP address and MAC address for active DHCP clients are displayed in the list. The two options for DHCP service are as follows: You may use the Router as a DHCP server for your LAN. You can disable DHCP service and manually configure IP settings for workstations.

Page 39 of 96

DSL-504T Generation II ADSL2+ Modem Router You may also configure DNS settings for the LAN when using the Router in DHCP mode. In Auto DNS Mode, the Router will automatically relay DNS settings to properly configured DHCP clients. To manually enter DNS IP addresses, select the Manual DNS Mode option and type in a Primary and Secondary DNS IP Address in the field provided. The manually configured DNS settings will be supplied to clients that are configured to request them from the Router. Follow the instructions below according to which of the above DHCP options you want to use. When you have configured the DHCP Settings as you want them, click the Apply button to commit the new settings.

Use the Router for DHCP

To use the built-in DHCP server, click to select the DHCP Server option if it is not already selected. The IP Address Pool settings can be adjusted. The Starting IP Address is the lowest available IP address (default = 10.1.1.2). If you change the IP address of the Router this will change automatically to be 1 more that the IP address of the Router. The Ending IP Address is the highest IP address number in the pool. Type in the Lease Time in the entry field provided. This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the workstation is disconnected from the network or powered off.

Page 49 of 96
DSL-504T Generation II ADSL2+ Modem Router There are many different pre-configured rules available for specific functions such as Internet gaming, VPN, streaming and interactive multi-media, standard TCP/IP protocols, reserved ports, p2p, network management applications, and so on. You may also create customized rules to manage TCP/UDP ports. The pre-configured rules include those listed in the table here:

Category

Available Rules
Alien vs. Predator, Asherons Call, Dark Rein 2, Delta Force, Doom, Dune 2000, DirectX (7.8) Games, EliteForce, EverQuest, Fighter Ace II, Half Life, Heretic II, Hexen II, Kali, Motorhead, MSN Gaming Zone, Myth: The Fallen Lords, Need for Speed Porsche, Need for Speed 3, Outlaws, Rainbow 6, Rogue Spear, Starcraft, Tiberian Sun, Ultima, Unreal Tournament, Quake 3 Server, Quake 2 Server, and Unreal Server. IPSec (L2TP) and PPTP Net2Phone, Netmeeting, and QuickTime 4 Server VNC, Win2k Terminal, PC Anywhere, Netbios, RemoteAnything, Radmin, LapLink, CarbonCopy, and Gnutella. Web, FTP, Telnet, DNS, LDAP, NNTP, SMTP, POP 2, POP 3, IMAP, IRC, Lotus, and Remotely Possible. Use this to set up custom TCP/UDP port rules.
VPN Audio/Video Applications

Servers

To configure a new port-forwarding rule for any of the pre-configured rules, follow these steps: 1. 2. 3. 4. 5. Select the WAN connection you want to use for the new rule from the Connection pull-down menu. Select a LAN IP from the available client IP addresses listed in the pull-down menu; or, create a New IP by clicking the button. This brings up the LAN Clients window (see next section). Select the Category of the rule you are creating. The Available Rules for the category appear in a list. Highlight to select the Available Rule you want to apply. Click on the Add> button to place the rule in the Applied Rules list of port forwarding that are actively applied to the client
The Available Rules can be applied to a single client IP address. That is, it is not possible to use an applied rule for multiple IP addresses on the LAN.

Page 50 of 96

Custom Forwarding Rules
The User category for port forwarding is used to set up customized port forwarding rules. To set up custom TCP or UDP port forwarding rules, follow these steps: 1. Select the User category and click the Add button located below the Available Rules list. This will change the window to look like the window below.

Page 56 of 96

Static Routing
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway.
Routing Table window To add a static route to a specific destination IP on the local network, enter a Destination IP address, Netmask, then click the Gateway radio button and type in the Gateways IP address. Click Apply to enter the new static route in the table below. The route becomes active immediately upon creation. To add a static route to a specific destination IP on the WAN, click the Connection radio button and choose a connection from the pull-down menu, then enter a Destination IP address and Netmask. Click Apply to enter the new static route in the table below. The route becomes active immediately upon creation To remove a static route from the table in the bottom half of the window, choose to Delete it from the table and click the Apply button. Remember to save the configuration changes.

Page 57 of 96

Firewalls may conflict with certain interactive applications such as video conferencing or playing Internet video games. For these applications, a firewall bypass can be set up using a DMZ IP address. The DMZ IP address is a visible address and does not benefit from the full protection of the firewall function. Therefore it is advisable that other security precautions be enabled to protect the other computers and devices on the LAN. It may be wise to use isolate the device with the DMZ IP address from the rest of the LAN. For example, if you want to use video conferencing and still use a firewall, you can use the DMZ IP address function. In this case, you must have a PC or server through which video conferencing will take place. The IP address of this PC or server will then be the DMZ IP address. You can designate the servers IP address as the DMZ by typing in the IP address in the IP Address space provided and then enabling its status by clicking the Enabled radio button and then click Apply. For the system that uses the DMZ IP address, you may want to manually assign an IP address to it and adjust your DHCP server addresses so that the DMZ IP address is not included in the DHCP server range. This way you avoid possible IP address problems if you reboot the DMZ system.
DMZ menu To designate a DMZ IP address, select the Enabled radio button, type in the IP Address of the server or device on your LAN, and click the Apply button. To remove DMZ status from the designated IP address, select the Disabled radio button and click Apply. It will be necessary to save the settings and reboot the Router before the DMZ is activated.

Page 58 of 96

Parental Control
Use Parental Controls to deny access to specified websites or websites containing specified words in the URL.

Service Filtering may interfere with other configurations such as DHCP Relay or Remote Management via Telnet.
Firewall Configuration menu
When DoS, Port Scan, or Service Filtering Protection is enabled, it will create a firewall policy to protect your network against the following:

Dos Protection

SYN Flood check ICMP Redirection check

Port Scan Protection

FIN/URG/PSH attack Xmas Tree Scan Null Scan attack SYN/RST attack SYN/FIN Scan

Service Filtering

Ping from WAN Telnet from WAN FTP from WAN DNS from WAN IKE from WAN RIP from WAN DHCP from WAN ICMP from LAN

Page 61 of 96

DSL-504T Generation II ADSL2+ Modem Router A DoS "denial-of-service" attack is characterised by an explicit attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing legitimate network traffic, attempts to disrupt connections between two machines, thereby preventing access to a service, attempts to prevent a particular individual from accessing a service, or, attempts to disrupt service to a specific system or person. Port scan protection is designed to block attempts to discover vulnerable ports or services that might be exploited in an attack from the WAN. The Service Filtering options allow you to block FTP, Telnet response, Pings, etc, from the external network. Check the category you want to block to enable filtering of that type of packet. When you have selected the desired Firewall policies, click the Apply button to enforce the policies. Remember to save any configuration changes.
The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN.
RIP System Wide Configuration menu To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply. The RIPv1 Compatible option will transmit RIPv2 broadcast packets and receive both RIP v1 and RIP v2 packets. The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select Out to instruct the Router to make RIP requests for routing tables from other devices. Select Both to share routing tables in both directions.

Page 62 of 96

The ADSL Configuration window allows the user to set the configuration for ADSL protocols. For most ADSL accounts the default settings ADSL2+ (Multi-Mode) will work. This configuration works with all ADSL implementations. If you have been given instructions to change the Modulation method used, select the desired option from the Modulation Type drop-down menu and click the Apply button.

ADSL Configuration menu

Page 63 of 96

ATM VCC

The ATM VC Setting window is used to configure the WAN connection. If you are using multiple PVCs, you can change the configuration of any PVC in this window. To create new or additional PVCs, read the section on Multiple PVCs. This window can be used as an alternative to configure the same settings found on the WAN Settings window in the Home directory.
ATM VC Settings menu To configure an existing PVC configuration set, click the corresponding notepad icon in the right-hand column of the ATM VCs List. The PVCs current settings appear above in the entry fields of the ATM VC Setting window. Configure the appropriate settings and click the Apply button to put the new settings into effect.

Page 64 of 96

QoS or Quality of Service is used to assign priority for qualified traffic that passes through the Routers wired interfaces (LAN and WAN). The Router uses four priority levels with 1 being the highest priority while 4 is the lowest. The IGMP Proxy/Snooping is disabled by default. This setting will not allow IGMP (Internet Group Management Protocol) packets to be forwarded from the WAN to the LAN for the purpose of IGMP snooping, or from the LAN to the WAN to request multicast group membership (IGMP Proxy). IGMP is used to manage multicasting (streaming radio for example is a multicast), most users will not need to enable this. Some ISPs use IGMP to perform remote configuration for client devices, such as the Router. If unsure, check with the service provider. To enable IGMP service to the LAN interface, select Enabled and click the Apply button
QoS Configuration menu To set QoS for the router, first click the PortMapping QoS check box in the middle of the window. This will open the following window. Then select the PVC to associate with the corresponding port and choose a priority for this combination. The user may also enable IGMP Proxy/Snooping for any PVC at the top of the window by choosing the PVC from the pull-down menu and clicking the Enabled radio button and set a maximum Bandwidth in kbps from Auto to 64 using the drop-down menu. Click Apply to set the configuration.
QoS configured in the QoS menu applies only to data traffic on the Ethernet LAN and the WAN (ADSL) ports.

Page 65 of 96

QoS Configuration window for Port Mapping QoS The Router can also be configured to use the QoS infomation contained in the header of IP packets. This will open the following window. To set IP QoS for the router, first click the IP QoS check box in the middle of the window. Then select the PVC to associate with the corresponding action and choose a maximum bandwidth and classification for this combination. Then select the classification type using the Classified by pull-down menu. The choices are Disable, ToS, Application, and User Define. Each choice will open the corresponding windows, shown following. The user may also enable IGMP Proxy/Snooping for each PVC at the top of the window by choosing the PVC from the pull-down menu and clicking the Enabled radio button and set a maximum Bandwidth in kbps from Auto to 64 using the drop-down menu. Click Apply to set the configuration.

Remote Log Settings window Select the Log Level from the pull-down menu. The levels available are: Alert, Critical, Debug, Error, Info, Notice, Panic and Warning. Type in the IP address of a receiver for the log message in the Add an IP Address field and click on the Add button. Log message receivers that are added appear listed in the Select a logging destination pull-down menu. These may be used at any time for other types of log messages. To remove a log message receiver from the list, select it and click on the Remove button. Click the Apply button when you have configured the log message receivers. Remember to save the settings to non-volatile memory.

Page 75 of 96

System
Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the System button in the Tools directory to display the System Settings window.
Save or Load Configuration File
Click the Save button to Save Settings to Local Hard Drive. You will be prompted to select a location on your computer to put the file. The file type is.bin (encrypted binary) and may be named anything you wish. To load a previously saved configuration file, click the Browse button and locate the file on your computer. Click the Load button to Load Settings from Local Hard Drive. Confirm that you want to load the file when prompted and the process is completed automatically. The Router will reboot and begin operating with the configuration settings that have just been loaded.

System Settings window

Save Settings and Reboot System
To save the settings you have configured, click the Save and Reboot button under Save Settings and Reboot the System.
Restore Factory Default Settings
To reset the Router to its factory default settings, click the Restore button. You will be prompted to confirm your decision to reset the Router. The Router will reboot with the factory default settings including IP settings (10.1.1.1) and Administrator password (admin). Page 76 of 96 www.dlink.com.au

If you are using this Router to provide Internet access for more than one computer, you can use these instructions later to change the IP settings for the other computers. However, you cannot use the same IP address since every computer must have its own IP address that is unique on the local network.
Configure Windows XP for DHCP
Use the following steps to configure a computer running Windows XP to be a DHCP client. 1. From the Start menu on your desktop, go to Control Panel.
From the Start menu, go to Control Panel.
In the Control Panel window, click Network and Internet Connections.

Page 88 of 96

Click Network Connections.

Internet

In the Network and Internet Connections window, click Network Connections.
In the Network Connections window, right-click on Local Area Connection, then click Properties.
Right-click on the Local Area Connection icon and select the Properties option from the pull-down menu.
In the General tab of the Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) under This connection uses the following items: by clicking on it once. Click on the Properties button.

Page 89 of 96

Click Properties.
Select Obtain an IP address automatically by clicking once in the circle. Click the OK button
Select Obtain an IP address automatically in the Internet Protocol (TCP/IP) Properties window.
Your computer is now ready to use the Routers DHCP server.

Page 90 of 96

Windows 2000
First, check for the IP protocol and, if necessary, install it: 1. 2. 3. 4. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. Double-click the Network and Dial-up Connections icon. In the Network and Dial-up Connections window, right-click the Local Area Connection icon, and then select Properties. The Local Area Connection Properties dialog box displays with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been enabled, skip ahead to Configure Windows 2000 for DHCP. If Internet Protocol (TCP/IP) does not display as an installed component, click Install. In the Select Network Component Type dialog box, select Protocol, and then click Add. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You may be prompted to install files from your Windows 2000 installation CD or other media. Follow the instructions to install the files. If prompted, click OK to restart your computer with the new settings.

5. 6. 7. 8. 9.

Configure Windows 2000 for DHCP
1. 2. 3. 4. In the Control Panel, double-click the Network and Dial-up Connections icon. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and then select Properties. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click Properties. In the Internet Protocol (TCP/IP) Properties dialog box, click the button labeled Obtain an IP address automatically.
5. Double-click OK to confirm and save your changes, and then close the Control Panel. Your computer is now ready to use the Routers DHCP server.

Page 91 of 96

Windows 95 and Windows 98
First, check for the IP protocol and, if necessary, install it: 1. 2. 3. 4. 5. 6. 7. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. Doubleclick the Network icon. The Network dialog box displays with a list of currently installed network components. If the list includes TCP/IP, and then the protocol has already been enabled, skip to Configure IP Information Windows 95, 98. If TCP/IP does not display as an installed component, click Add. The Select Network Component Type dialog box displays. Select Protocol, and then click Add. The Select Network Protocol dialog box displays. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list box. Click OK to return to the Network dialog box, and then click OK again. You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to install the files. Click OK to restart the PC and complete the TCP/IP installation.
Configure Windows 95 and Windows 98 for DHCP
1. 2. 3. 4. 5. 6. 7. Open the Control Panel window, and then click the Network icon. Select the network component labeled TCP/IP, and then click Properties. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter. In the TCP/IP Properties dialog box, click the IP Address tab. Click the Obtain an IP address automatically option. Double-click OK to confirm and save your changes. You will be prompted to restart Windows. Click Yes.
When it has restarted, your computer is ready to use the Routers DHCP server.

Windows ME

First, check for the IP protocol and, if necessary, install it: 1. 2. 3. 4. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. Double-click the Network and Dial-up Connections icon. In the Network and Dial-up Connections window, right-click the Network icon, and then select Properties. The Network Properties dialog box displays with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip ahead to Configure Windows ME for DHCP. If Internet Protocol (TCP/IP) does not display as an installed component, click Add. In the Select Network Component Type dialog box, select Protocol, and then click Add. Select Microsoft in the Manufacturers box. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You may be prompted to install files from your Windows Me installation CD or other media. Follow the instructions to install the files.

In-line low pass filter

Page 94 of 96

Three Port Filter

Another style of filter is installed at the same point where the Router connects to the telephone line. Only a single filter is required. The connection ports are typically labeled as follows: Line - This port connects to the wall jack. ADSL This port connects to the Router. Phone This port connects to a telephone or other telephone device. The diagram below illustrates the proper use of this style of filter. Make certain the lines are properly connected. If you are unable to hear a dial tone with the telephone, check the connections to make sure they are securely attached and connected to the correct port.

ADSL Device

3-port Filter

Page 95 of 96

Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link Australia 1 Giffnock Avenue North Ryde, NSW 2113 Sydney, Australia TEL: +61-2-8899-1800 FAX: +61-2-8899-1868 Australia: 1300-766-868 New Zealand: 0800-900-900 URL: www.dlink.com.au www.dlink.co.nz E-MAIL: support@dlink.com.au

V1.00 AU

Page 96 of 96