Setting the clock

Push and hold Adjust the time via Adjust the day via To save adjustments push until the clock starts to flash.

Additional information

Last command
If there is no external room programmable thermostat, the controller works on last command basis i.e. if you change the water flow temperature or desired room temperature, then this will stay the same until it is either changed or there is an action programmed in the schedule timer such as water temperature change or off function.
Setting the schedule timer

Domestic hot water mode

Note: if a remote room programmable thermostat is being used in the top right of the display. This means the on/off of the equipment is controlled by the remote room programmable thermostat. There are two types of schedule timers 1) 7 day timer with 5 actions per day, for space heating and domestic hot water 2) 24 hour timer with 5 actions, only for outdoor unit quiet operation Hint: When programming the schedule timers use the menu, press to go back a step in the menu. once.
DesignHQ. Copyright 2010 Daikin. 05.10 / Printed in the UK on FSC certified paper from sustainable sources.
Daikin Altherma high temperature remote controller guide for schedule timers and operation functions

will be displayed

It is possible to boost the domestic hot water if a shortage occurs. This setting will override any current setting at the time of operation. To activate the domestic hot water boost mode press and hold until the symbol starts flashing. This setting will deactivate once the domestic hot water has reached its set point.

www.altherma.co.uk

For full user instructions, please refer to the Daikin Altherma operation manual.

to advance through the

To enter the schedule timer function press Once into the first schedule timer menu use the to select the desired program. 1) Space heating 2) Domestic hot water 3) Outdoor quiet function To enter any of the schedule timers press
Daikin Airconditioning UK Ltd The Heights, Brooklands, Weybridge, Surrey KT13 0NY Tel Fax 0845 6419009
1. Space heating on/off 2. arget flow water T temperature / room temperature set point once button 5 has been pushed 3. /A N 4. Domestic hot water on/off 5. Room temperature set point
6. Flow water set point 7. Time adjust 8. Schedule timer on/off 9. eather dependant W (compensation) on/off 10. utdoor unit quiet O operation 11. rogramming button for P schedule timer
12. Schedule timer action 13. Day display 14. Time display 15. Space heating operation mode 16. Domestic hot water operation active 17. Outdoor quiet operation active
Daikin Altherma high temperature remote controller guide
Setting the schedule timer (continued)

1) 7 Day schedule timer

The selected program will be flashing (either the of the week). or symbol and also the days This button will change the desired function of the schedule timer from a set water flow temperature to weather dependant mode and finally to switching the unit off (please see note). Push to advance to the next schedule action number. Repeat until settings flashes up on the controller and the Push previous step until either you dont require any further actions or a maximum of 5 actions have been selected. Push and hold subsequent day is flashing (if saving Monday, Tuesday will now be flashing). Repeat steps Use the To enter the chosen day push now appear). to adjust the day of the week. (if this is done on space heating this screen will until everything is programmed, or copy the days as follows. These buttons will change the time of the action set. This button will change the desired function of the schedule timer from on to off. to advance to the next schedule action number, repeat previous step until either until settings flashes up on the controller. button to go back a menu, until back to main screen you dont require any further actions or a maximum of 5 actions have been selected. Push and hold

Please remember to use if required.

Copying days

If you require to copy the day you have just programmed then push previous programmed by pressing across to the next day by pressing and holding once and it will take you back one step in the menu. This will allow you to select the day you had once. You can now copy that day and until setting flashes up
Note: If turning the space heating off in the schedule timer it may prevent the unit from switching back on by the schedule timer. This is not a fault, the schedule timer has to be adjusted so the unit never has an off function. Just change the desired room temperature set point i.e. 16C; or even reduce the water flow temperature down to 25C to make sure the unit is only required to maintain a background temperature. This will allow you to switch off the space heating schedule timer in the summer months by switching allowing the domestic hot water schedule timer to carry on operating as before. to off,
If the schedule timer has been previously programmed then you can view each schedule by using until the clock symbol begins to flash. It is now possible to program the schedule timer. When programming for the first time it will be necessary to push the action 1 next to the clock. These buttons will change the time of the action set. These buttons will change the water flow temperature (should be N/A). These buttons will change the room set point (desired room temperature) as long as no third party room thermostat is fitted. once to display. To alter or add a schedule push and hold down
on the controller and the subsequent day is now shown. To continue copying then repeat pressing and holding and as before, until you have programmed the week or until the day you wish to schedule the timer. Please remember to use if required. button to go back one step or until main screen
Once all the schedule timers have been programmed use normal remote controller screen.
until you are back to the
2) 24 hour schedule timer
Once you have entered the night quiet mode, will be displayed. This schedule only has 5 actions (repeats every 24 hours) which can be viewed by pushing the (if previously programmed). To adjust the schedule timer push and hold until the clock symbol begins to flash. When programming for the first once to display action 1 next to the clock. time it will be necessary to push
Activating the schedule timer
To activate the schedule timer push controller deactivating the schedule timer. and the clock will be displayed on the left hand side of the controller. Push it again and the clock symbol will disappear from the

LOW TEMPERATURE

Daikin Altherma Monobloc Air Source Heat Pump
the energy efficient home heating system
Daikin Altherma is a highly flexible, energy efficient home heating system that extracts the heat from the outside air, raises this heat to a higher temperature and then distributes warmth around the home. At the heart of the system lies an air to water heat pump. Because of this advanced technology, three quarters of the heat generated by the Daikin Altherma system is from a renewable energy source, the air around us, and therefore absolutely free of charge! The Daikin Altherma air to water heat pump is todays answer to the current and future problems associated with conventional heating systems, such as, increasing primary energy costs and an unacceptably high environmental impact.
LESS ENERGY, PLEASANT WARMTH IN THE HOME Daikin Altherma operates 3 to 5 times more efficiently than a traditional heating system based on fossil fuels or electricity. By making use of the heat in the outside air, you use far less energy while still enjoying a stable and pleasant level of comfort. Also, maintenance requirements are minimal ensuring low running costs. Thanks to the inverter technology and in-built weather compensation control Daikin Altherma uses; energy savings are even greater than most other heat pump systems. COMPLETE COMFORT FOR YOUR FAMILY Daikin Altherma satisfies all your heating and domestic hot water requirements right through the year even on the coldest days. With a fully integrated control system, Daikin Altherma will provide consistent comfort with optimum efficiencyand for those long hot summer days Daikin Altherma even comes with a cooling option. RENEWABLE, INEXHAUSTIBLE ENERGY WITH SOLAR PANELS Daikin Altherma has an option to be connected to, and to work in conjunction with solar panels. The integrated control system will maximise the renewable heat available, be it from the air, via the heat pump, or direct sunlight from the solar panel.
3 imple installation water connections only S 50% reduction in CO2 emissions ow running costs L 3 ow maintenance L 3 ow noise unobtrusive and quiet L 3 o groundwork i.e. trenches or boreholes N 3 o gas supply, flues or ventilation required N 3 omparable installation costs to gas fired boilers C 3 uitable for both apartments & houses S 3 lexible, can be connected to underfloor heating, F low temperature radiators or fan coils 3 elps achieve 3 stars rating and higher in the code H for sustainable homes 3 educed VAT for domestic applications down to 5% R 3 o refrigerant handling required N 3 ntifreeze function eliminates need for glycol A
Outdoor Unit SINGLE PHASE Nominal capacity Nominal input COP EER Operation range Heating Cooling Domestic water

Sound power level

Heating only EDHQ011A6V3 Heating Cooling Heating Cooling kW kW kW kW 4.54 C C C dBA dBA dBA dBA mm kg R-410A kg A 1418 x 1435 x 2.95 1~/230V/50Hz 64 -20~50 4.37 -15~35(1) 4.22 2.47 3.20 3.79 11.20 EDHQ014A6V3 14.00 EDHQ016A6V3 16.00 EBHQ011A6V3 11.20 10.00 2.47 3.60 4.54 2.78
Reversible EBHQ014A6V3 14.00 12.50 3.20 5.30 4.37 2.36 -15~35(1) 10~46 -20~x 1435 x 2.95 1~/230V/50Hz 54 EBHQ016A6V3 16.00 13.10 3.79 5.85 4.22 2.24

Heating Cooling

Sound pressure level Heating
Cooling Dimensions Weight Refrigerant charge Power Supply Recommended fuses HxWxD
Measuring conditions: Heating Ta DB/WB 7C/6C - LWC 35C (DT=5C) - Cooling Ta 35C - LWE7C (DT=5C) (1) E(D/B)L* models can reach -20C
Heating only Combination Table - Accessories Stainless steel DHW cylinder (unvented) EKHWSU150B3V3 EKHWSU200B3V3 EKHWSU300B3V3 Solar enabling kit Wired remote control Wireless remote control EKSOLHWAV1 EKRTW EKRTR + EKRTETS EDHQ011A6V3 EDHQ014A6V3 EDHQ016A6V3 EBHQ011A6V3
Reversible EBHQ014A6V3 EBHQ016A6V3

3 reeze protection of hydraulic parts, F by insulation provided for all hydraulic components 3 pecialised software to activate the S pump and back up heater if necessary, to prevent the water temperature from dropping below freezing 3 eather compensation built in W as standard 3 ingle phase power supply S 3 o fuel storage tank required N
Daikin products are distributed by:
The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin UK. Daikin UK has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin UK explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin UK.
Daikin units comply with the European regulations that guarantee the safety of the product.
Daikin Europe N.V. participates in the Eurovent Certification Programme for Air Conditioners (AC), Liquid Chilling Packages (LCP) and Fan Coil Units (FC); the certified data of certified models are listed in the Eurovent Directory. Multi units are Eurovent certified for combinations up to 2 indoor units.
Daikin Airconditioning UK Ltd The Heights, Brooklands, Weybridge, Surrey KT13 0NY Tel Fax 0845 6419009
UKEPLEN09-723 / 06.09 / Swim. Copyright 2009 Daikin. Printed in the UK on paper that is 50% recycled and 50% from sustainable sources.

www.altherma.co.uk

Visit www.microgenerationcertification.org for a list of the latest MCS certified Daikin heat pumps