Heating

Climate comfort
Heating Air conditioning Applied Systems Refrigeration

All seasons

Catalogue
Heating - Domestic hot water - Cooling
Durable & efficient energy solutions

for residential use

So, you and your customer realise it is time to switch to a
Energy efficient Economical Low CO2 emissions Low cost installation Family friendly
heating system that is energy efficient and produces low CO2 emissions. Daikin Altherma is a total domestic heating and hot water system based on air source heat pump technology. It represents a flexible and cost-effective alternative to a fossil fuel boiler and has a cooling option*. The inherent energy efficiency characteristics of Daikin Altherma make it an ideal solution for reduced energy consumption and low CO2 emissions and it achieves

optimal comfort through

its high and low temperature heating systems. The easy-to-install Daikin Altherma system uses highly energy-efficient, advanced compressor technology in its heat pumps to transform unutilised and inexhaustible heat from the surrounding air into usable heat for the system, either as part of the over all climate control system or as a stand alone source of domestic hot water.
* low temperature heating systems
Offer your clients the benefits of Daikin technology 6
See pages 10-11 for all systems & applications See pages 42-55 for all specifications
Top energy-efficient solutions for every application Heating, domestic hot water and cooling for new houses Split system: Outdoor + indoor unit Monobloc system: Outdoor unit only Domestic hot water tank Easy control Heat pump convector Solar connection Heating & domestic hot water for renovations Outdoor & indoor unit Domestic hot water tank Solar connection Easy control Heating, domestic hot water and cooling
for apartment buildings and collective housing 32
Two Daikin technologies combined Domestic hot water tank Easy control Heat pump convector selection software Selection and simulation software for new houses and renovations Selection and design software for apartment buildings and collective housing Technical specifications

Offer your clients

the benefits of Daikin technology
Energy efficient operation
The air to water heat pump from Daikin Altherma uses a sustainable energy source. In fact, it extracts heat from the outside air. The system consists of a closed circuit containing a refrigerant. A thermodynamic cycle is created through evaporation, condensation, compression and expansion. A heat pump pumps heat from a low to a higher temperature level. The heat raised is transferred to the water distribution system (under floor heating, low temperature radiators and/or fan coil units for low temperature heating systems and high temperature radiators for high temperature heating systems) in the home via a heat exchanger. Depending on the model and the conditions, a Daikin Altherma air to water heat pump delivers about 3kWh of usable heat for every kWh of electricity it uses. So this means that approximately 2/3 of the required heat is free!
TWO BASIC CONCEPTS OF HEAT PUMP TECHNOLOGY COP (Coefficient of Performance) or gain factor The COP indicates the amount of usable heat the heat pump delivers for every kWh electricity the heat pump uses. This number is dependent on the interior and exterior

2/3 kW

ambient temperature
temperature and is therefore only a snapshot indicator.

3/3 kW

energy
SPF (Seasonal Performance Factor) or performance factor of the heat pump system The SPF takes into consideration both the energy consumption of the heat pump system as well as the consumption by peripheral equipment, such as pumps, over the entire heating season.

1/3 kW

electricity
LESS ENERGY, PLEASANT WARMTH IN THE HOME Daikin Altherma heats up to 5 times more efficiently than a traditional heating system based on fossil fuels or electricity. By making use of the heat in the outside air, the system uses much less energy while your customer can still enjoy a stable and pleasant level of comfort. Also, maintenance requirements are minimal making the running cost low. Thanks to the inverter technology, the energy savings are even greater. 6
ECO-LABEL Daikin is the first manufacturer to receive the Eco-label for heat pumps! Daikin Altherma low temperature with under floor heating received the EU ECO-LABEL* because it has a higher energy efficiency and a lower global warming impact than other heat pump products in its class.
Please refer to http:// www.daikinaltherma.eu/eco-label.jsp for the certified products
AIR AS RENEWABLE ENERGY SOURCE The European RES directive* recognises air as a renewable energy source. One of the goals of this directive is that by 2020, 20% of the total energy production needs to be produced by a renewable energy source. As a result, several heat pump incentives are already available to homeowners.

* EU objective COM (2008) /30

DID YOU KNOW?

Daikin has set up a number of monitoring sites (in Scandinavia, Portugal, France, Belgium,.), where Daikin Altherma has been tested under totally different climate conditions. High satisfaction has been achieved with increased comfort, stable indoor temperature, low energy consumption and hot water always availablewhatever the weather conditions at the monitoring site.
RENEWABLE, INEXHAUSTIBLE ENERGY with solar collectors In combination with solar collectors, Daikin Altherma uses thermal energy from the sun which will keep up its good work for another five billion years. DAIKIN HEAT PUMP EXPERIENCE Daikin has more than 50 years of experience with heat pumps, and supplies more than one million of them to homes, shops and offices each year. This success is not just a quirk of fate: Daikin has always been at the cutting edge of technology and its goal is to provide you with turn-key comfort. Only a market leader can guarantee you this level of service and quality control!
Daikin Altherma: the economical alternative

Reduced operation costs

A Daikin Altherma heat pump works more efficiently than a traditional fossil-fuel boiler, generating 3kW of usable heat for every 1kW of electricity used. Talk about a good investment!

Fuel oil boiler 100%

Gas boiler 82%
Daikin Altherma heat pump
Conditions: Required annual heating energy: 20,000 kWh. Source: Energy prices based on EUROSTAT statistics [first semester 2007].

Low CO2 emissions

Average annual CO2 emissions
Daikin Altherma* 2660 Gas boiler 4344 Fuel oil boiler 6045
Daikin Altherma produces no direct CO2 emissions, so you personally contribute to a better environment. The pump does use electricity, but even without renewable electricity the CO2 emissions are still much lower than boilers that use fossil fuels.

kg/year

Calculation based on data from Eurelectric (organisation of European electricity producers), Eurelec Progam - 2001 for EU27 * Valid for Daikin Altherma low temperature split (small capacities)

Low installation cost

Daikin Altherma takes heat from the air. No digging or excavation works are required. Both the outdoor and indoor units are compact. The external unit can be located easily outside any building, including flats. Without flames or fumes, there is no need for a chimney or constant ventilation in the room where the Daikin Altherma unit is installed.

domestic hot water tank with a stainless steel finish is available in different sizes and capacities.

Heat pump convector p22

Although the Daikin Altherma system is compatible with all types of heat emitters such as under floor heating, radiators and fan coil units, the optimal solution is the heat pump convector which is much more than a fan coil unit or any other heat emitter. It can provide both heating and cooling if required and obtains optimal energy efficiency by approximately 25% when connected to a Daikin Altherma low temperature system in combination with under floor heating.
As for the domestic hot water, Daikin Altherma is just as clever. The water inside the storage tank is initially warmed up by thermal energy from the outside air, thanks to the connection with the indoor unit. The standard

easy control p21

With the wired or wireless room thermostat*, the ideal temperature can be easily, quickly and conveniently regulated. It allows for more precise measurement , thus allowing your customer to regulate the comfort levels optimally and more energy efficiently.
*EKRTW for wired wall mounted and EKRTR for the wireless type.
Daikin Altherma LOW TEMPERATURE for new houses
Daikin Altherma offers two low temperature systems including a domestic hot water system all of which connect to the same range of accessories.

Monobloc system

Everything combined in one outdoor unit
In addition to Daikin Altherma split systems, Daikin has introduced a monobloc version in which all hydraulic parts are located within the outdoor unit. In this system, the water pipes, rather than the refrigerant pipes, run indoors from the outdoor unit, making
and easier for the domestic installer.
installation much quicker
Available capacities for monobloc: 6, 8 kW and 11, 14, 16 kW Outdoor unit only

New extra small casing

Accessories for low temperature applications

Solar connection p23

Under floor heating
As Rotex is part of the Daikin group, all heating supplies can be offered. For more information, contact your local supplier.
To save even more energy on your domestic hot water production, the Daikin Altherma system can be connected to a solar system.The high-efficiency collectors transfer all the short-wave solar radiation into heat as a result of their highly selective coating. The collectors can be mounted on the roof tiles.
1 Split system: Outdoor + indoor unit

outdoor unit:

Standard to
>> >> >>

-20C outside temperature

compact, weather-resistant and easy to install contains an inverter controlled compressor for energy efficiency and precise temperature regulation heat pump operational range: heating and domestic hot water down to -20C outside temperature

HEAT EXCHANGER ANTI-CORROSION TREATMENT
As a standard, the heat exchanger in the outdoor group is provided with an anti-corrosion treatment. This treatment guarantees a noticeable increase in resistance against acid rain and salt corrosion.
Typical heat exchanger Hydrophilic layer Aluminium Corrosion-resistant acrylate resin
SUPER PERFORMANCE THANKS TO THE INVERTER PRINCIPLe
The coefficient of performance (COP) of the Daikin Altherma heat pump is also largely attributable to the Daikin inverter principle. An integrated frequency-convertor adjusts the rotational speed of the compressor to suit the heating demand. Therefore, the system seldom operates at full capacity and your customer only pays for the energy which he actually needs.

Heating operation:

Temperature / Power input Temperature remains stable

Slow start Set temp.

heat pump without Inverter heat pump with Inverter Time
HIGH EFFICIENCY COMPRESSORS
Daikin Altherma small capacity models (6 to 8 kW ) are equipped with a swingcompressor. Swing-compressors have been setting trends in the area of energy efficient performance for the past 10 years in thousands of outdoor units (leaks and friction are basically non-existent). The Daikin developed scroll-compressors provided in the Daikin Altherma large capacity models (11 to 16 kW) are designed as compact, robust, low-noise devices to guarantee optimal operational reliability (no valves and built-in swing-link coupling) and efficiency (through a low initial flow and a constant compression ratio). A technology already used in many Daikin heat pumps.

for cold climates to

-25C outside temperature
To operate down to -25C, several features have been added to the standard features to improve the performance in cold weather.

Hot gas pass:

hot gas runs through the bottom plate to keep its temperature positive and all drain holes open to ensure proper drainage.

Sub cool pass:

13. Knockout holes 14. Knockout holes
EKHWS EKHWE domestic hot water tank
1. Field supply 2. Hot water connection 3. Pressure relief valve connection 4. Pressure relief valve (field supply) 5. Electrical box 6. Electrical box lid 7. Recirculation hole 8. Thermistor socket 9. Flow inlet connection 10. Heat exchanger coil 11. Return outlet connection 12. Cold water inlet 13. Threaded thermistor hole for use with solar kit option. Refer to the Installation manual EKSOLHWAV1.
hygienic design in stainless steel (EKHWS) or enamelled steel (EKHWE). in combination with wall mounted and monobloc heating system available in 3 capacities: 150, 200 and 300 litres. 40 mm cfc-free insulation material (polyurethane) for stainless steel tanks and 50 mm enamelled steel tanks. contains 2 heating elements: a heat exchanger at the bottom where the hot water from the indoor unit circulates and an extra 3 kW electric heater at the top. a thermistor in the hot water tank controls a 3-way valve and/or booster heater via the indoor unit.

Easy control

system controller
Weather dependant floating set point
When the floating set point functionality is enabled, the set point for the leaving water temperature will be dependant on the outside ambient temperature. At low outside ambient temperatures, the leaving water temperature will increase to satisfy the increasing heating requirement of the building. At warmer temperatures the leaving water temperature will decrease to save energy.

Optional room thermostat

An external sensor (EKRTETS) can be placed between the under floor heating and the floor, as an option to the wireless room thermostat. The thermostat measures the room temperature and communicates directly to the user interface. The LCD screen of the room thermostat indicates all the necessary information regarding the setting of the Daikin Altherma system in the blink of an eye. The user can easily navigate between the different menus, the most common of which include:
Setting the temperature of the room based on measurements from the built-in or external sensor Cooling and heating mode Off function (with integrated frost-protection function) Holiday function mode Comfort and reduced function modes Time (day and month) Programmable week-timer with 2 user defined and 5 pre-set programmes, with up to 12 actions per day Keylock function Setting limits. The installer can change the upper and lower limits Floor temperature protection and protection against condensation for underfloor cooling *

* Data calculated taking into account Belgian conditions: SCOP of 3, average energy prices 2007-2010, CO2 emission factor for electricity production

Condensing gas

Daikin Altherma for apartment buildings and collective housing
120% 100% 80% 60% 68% 40% 20% 0% 100% 82%
140% 120% 100% 80% 60% 40% 20% 0% 120% 92%
120% 100% 100% 80% 89% 60% 40% 20% 0% 29% 73%

Running cost

Primary energy Efficiency

CO2 emissions

Daikin Altherma Flex Type For apartment buildings and collective housing
Under floor heating Radiators Heat pump convectors Fan coil units

Modular system

One or more inverter-controlled outdoor heat pump units can provide heating, cooling and domestic hot water to an apartment building, with 1 outdoor unit combined
with up to 10 indoor units. Outdoor units between
23 and 45 kW extract the heat from the outdoor air, raise it to an intermediate temperature and transfer this heat energy to the individual indoor units. A small footprint indoor unit is installed in each individual dwelling. It receives the heat energy from the central outdoor unit, raises the temperature further by means of a second (cascading) heat pump cycle and feeds heated or cooled water to emitters (under floor elements, heat pump convectors and/or radiators as needed). Two classes of indoor units are available (6 and 9 kW), ensuring optimum efficiency for any size apartment. Multiple outdoor units can be installed for larger applications.

3-in-1 system

Daikin Altherma Flex Type heats, cools, and produces Heating: leaving water temperatures up domestic hot water:
to 80 C Cooling: leaving water temperatures down to 5 C Domestic hot water: tank temperatures up to 75 C
Thanks to its heat recovery function, the system can heat up the domestic hot water tank up to 60C with rejected heat from cooling operation.
One or more outdoor units and several indoor units

1 apartment

9kW 22.4kW

Space heating

Daikin Altherma Flex Type makes use of the cascade technology to improve the efficiency of the spacing heating supplied because it has a number of significant advantages over single refrigerant heat pumps: it provides for a wide range of water temperatures (25 - 80C) which enables all types of heat emitters to be connected including under floor heating, convectors and radiators and it is compatible with existing radiator systems there is no drop in capacity with increasing water temperatures it delivers high capacities at low ambient temperatures right down to -20C No back-up electrical heater is required

Cooling

The second refrigerant cycle R-134a can be bypassed to offer efficient cooling. The R-410A refrigerant cycle is reversed, and the cool water circuit can be used to cool the rooms. High cooling capacities with water temperatures down to 5C, in combination with Daikin heat pump convector or Daikin fan coil units Under floor cooling is possible, with water temperatures down to 18 C Heat from cooling operation can be recovered to heat the domestic hot water tank

Symbolic graph

compressor
The Daikin heat pump convector operates at typical water temperatures of 45C, which can be efficiently produced thanks to the Daikin Altherma cascade technology. The heat pump convector is therefore the ideal heat emitter for apartment applications, providing high comfort levels:
Small dimensions compared to low temperature radiators: width is reduced with 2/3rd
Radiateur standard bassetemprature Radiateur standard basse temprature

2000mm

2000mm 2000mm
Standard low temperature radiator Daikin heat pump convector

600mm 600mm 600mm

600mm 600mm

Console Daikin

700mm 700mm
Low sound level down to 19 dB(A), optimal for bedroom applications High-capacity cooling with water temperatures down to 6 C

Control

Each Daikin heat pump convector has its own control and every room can be independently heated (or cooled) as required. The remote control has a built-in weekly timer for optimum flexibility and comfort. Operation of the unit can be adapted to individual requirements.
Infrared remote control (Standard) ARC452A15
Heating / Cooling operation

living room bedroom 1

Heating (45C) / Cooling (6C) bedroom 2

45C / 7C

All types of heat emitters can be connected to Daikin Altherma for apartment buildings and collective housing, thanks to its wide water temperature range and its ability to work with multiple set points, allowing a combination of different heat emitters operating at different water temperatures. The set point of the indoor unit is a function of the actual demand of the various heat emitters, ensuring optimum efficiency at all times and under all conditions.

4.36(1) 3.87(2) 6.84(1) 6.10(2) 8.79(1) 7.98(2) 4.82(1) 3.67(2) 8.16(1) 5.86(2) 8.50(1) 6.13(2) 1.58 (1) 1.95 (2) 2.78 (1) 2.59 (2) 4.34 (1) 3.13 (2) 2.94 (1) 2.26 (2) 735/825/-20~25 10~43 -20~43 1.48 20
4.36(1) 3.87(2) 8.43(1) 7.64(2) 9.58(1) 8.76(2) 4.82(1) 3.67(2) 8.37(1) 6.08(2) 8.91(1) 7.10(2) 2.08 (1) 2.54 (2) 2.97 (1) 2.75 (2) 4.05 (1) 3.00 (2) 2.82 (1) 2.21 (2)

11.2 (1) 10.98(2)

14.0 (1) 13.1 (2)

16.0 (1) 15.2 (2)

15.05 (1) 11.72 (2)

16.06 (1) 12.55 (2

16.76 (1) 13.12 (2)
2.41 (1) 2.96 (2) 4.44 (1) 4.22 (2) 4.66 (1) 3.48 (2) 3.39 (1) 2.78 (2)
3.14 (1) 3.98 (2) 5.33 (1) 5.00 (2) 4.46 (1) 3.29 (2) 3.01 (1) 2.51 (2) 1.345/900/-25~35 10.0~46.0 -20~35 3.4
3.72 (1) 4.62 (2) 6.06 (1) 5.65 (2) 4.30 (1) 3.29 (2) 2.76 (1) 2.32 (2)
Dimensions Weight Operation range Refrigerant Sound power level Sound pressure level Power supply Current
unit height/width/depth unit heating min.~max. cooling min.~max. domestic hot water min.~max. type charge heating nom. cooling nom. heating nom. cooling nom. name;phase;frequency;voltage recommended fuses
mm kg CWB CDB CDB kg dBA dBA dBA dBA Hz;V A

R-410A V3;1~;50;52 54

SPLIT SYSTEMWall mounted indoor unit - three phase
INDOOR UNITS colour material Dimensions unit Weight unit heating Operation range cooling Sound power level medium speed Casing Sound pressure level medium speed high speed
EKHBH016B RAL9010 Epoxy polyester painted galvanised steel 922/502/15~55 (6)
mm kg water side min.~max. C water side min.~max. C 0 esp dBA 0 esp dBA nominal flow dBA nominal flow dBA

height/width/depth

5~(3) / 29 (4) / 28 (5) 33 (3) / 33 (4) / 32 (5)
OUTDOOR UNITS Heating capacity nom. Cooling capacity Power input nom. heating cooling COP EER Dimensions Weight height/width/depth unit unit heating min.~max. Operation range cooling min.~max. domestic hot water min.~max. type Refrigerant charge heating nom. Sound power level cooling nom. heating nom. Sound pressure level cooling nom. Power supply name;phase;frequency;voltage Current recommended fuses nom. nom.
ERHQ011BW1 kw kw kw kw 11.32 (1) 10.98 (2) 15.05 (1) 11.72 (2) 2.54 (1) 3.15 (2) 4.44 (1) 4.22 (2) 4.46 (1) 3.48 (2) 3.39 (1) 2.78 (2) mm kg cwb cdb cdb kg dba dba dba dba hz;v a
ERHQ014BW1 14.50 (1) 13.57 (2) 16.06 (1) 12.55 (2) 3.33 (1) 4.12 (2) 5.33 (1) 5.00 (2) 4.35 (1) 3.29 (2) 3.01 (1) 2.51 (2) 1.345/900/-20~35 10~46 -20~43 R-410A 2.52 W1;3N~;50;400 20
ERHQ016BW1 16.05 (1) 15.11 (2) 16.76 (1) 13.12 (2) 3.73 (1) 4.60 (2) 6.06 (1) 5.65 (2) 4.30 (1) 3.29 (2) 2.76 (1) 2.32 (2)
OUTDOOR UNITS WITH BOTTOM PLATE HEATER Heating capacity nom.

Cooling capacity nom. Power input heating cooling COP EER Dimensions Weight Operation range unit height/width/ depth nom. nom.
ERLQ011CW1 11.20 (1) 10.98 (2) 15.05 (1) 11.72 (2) 2.41 (1) 3.15 (2) 4.44 (1) 4.22 (2) 4.66 (1) 3.48 (2) 3.39 (1) 2.78 (2)
ERLQ014CW1 14.00 (1) 13.57 (2) 16.06 (1) 12.55 (2) 3.14 (1) 4.12 (2) 5.33 (1) 5.00 (2) 4.46(1) 3.29 (2) 3.01(1) 2.51 (2)
1,345/900/-25~35 10~46 -20~35
ERLQ016CW1 16.00 (1) 15.20 (2) 16.76 (1) 13.12 (2) 3.72 (1) 4.60 (2) 6.06 (1) 5.65 (2) 4.30 (1) 3.29 (2) 2.76 (1) 2.32 (2)

mm kg CWB CDB CDB

Refrigerant Sound power level Sound pressure level Power supply Current
unit heating min.~max. cooling min.~max. domestic hot min.~max. water type charge heating nom. cooling nom. heating nom. nom. cooling name;phase;frequency;voltage recommended fuses
kg dBA dBA dBA dBA Hz;V A

R-410A 3.4

52 W1;3N~;50;54

SPLIT SYSTEM

floor standing indoor unit - single phase
EKHVH008B EKHVX008B EKHVH016B EKHVX016B Metallic grey Precoated sheet metal 705/600/15~50 (9) 30 (3) / 29 (4) / 29 (5) 32 (3) / 32 (4) / 31 (5) 31 (6) / 29 (7) / 28 (8) 33 (6) / 33 (7) / 32 (8) 15~50 (9) 5~22 15~55 (9) 15~55 (9) 5~22
mm kg water side min.~max. c water side min.~max. c 0 esp dba 0 esp dba nominal flow dba nominal flow dba
OUTDOOR UNITS min. Heating capacity nom. max. min. Cooling capacity nom. max. Power input COP EER Dimensions Weight unit height/width/depth unit heating min.~max. Operation range cooling min.~max. domestic hot water min.~max. type Refrigerant charge heating nom. Sound power level cooling nom. heating nom. Sound pressure level cooling nom. Power supply name;phase;frequency;voltage Current recommended fuses mm kg CWB CDB CDB kg dBA dBA dBA dBA Hz/V A heating cooling nom. nom. kW kW kW kW kW kW kW kW
ERHQ007BAV3 4.36(1) 3.87(2) 6.84(1) 6.10(2) 8.79(1) 7.98(2) 4.82(1) 3.67(2) 8.16(1) 5.86(2) 8.50(1) 6.13(2) 1.58 (1) 1.95 (2) 2.78 (1) 2.59 (2) 4.34 (1) 3.13 (2) 2.94 (1) 2.26 (2) 735/825/-20~25 10~43 1.48 20

ERHQ011BAV3

ERHQ014BAV3

ERHQ016BAV3

11.2 (1) 10.3 (2)

13.90 (1) 10.00 (2)

17.30 (1) 12.50 (2)

17.80 (1) 13.10 (2)

2.46 (1) 3.06 (2) 3.79 (1) 3.60 (2) 4.55 (1) 3.37 (2) 3.67 (1) 2.78 (2)
3.17 (1) 3.88 (2) 5.78 (1) 5.29 (2) 4.42 (1) 3.38 (2) 2.99 (1) 2.36 (2) 1,170/900/-20~35 -~3.32

11.20 (1) 10.87 (2) 2.47 (1) 3.22 (2) 4.54 (1) 3.37 (2)
EDLQ014BB6V3 EDHQ014BB6V3
14.00 (1) 13.10 (2) 3.20 (1) 3.91 (2) 4.37 (1) 3.35 (2)
EDLQ016BB6V3 EDHQ016BB6V3
16.00 (1) 15.06 (2) 3.79 (1) 4.62 (2) 4.22 (1) 3.26 (2)
1,418/1,435/6V3 1~/50/230 -15~35 15~55 -15~43 25~80 R-410A 2.V50 230
Domestic hot water Type Charge Sound power level Heating Sound pressure level Heating Compressor Main power component supply Refrigerant
monobloc SYSTEMheating only large capacity - three phase
With bottom plate heater Without bottom plate heater Heating capacity Nom. Power input COP Dimensions Weight Hydraulic component Operation range Heating Unit Unit Back-up heater current Heating Domestic hot water Refrigerant Sound power level Sound pressure level Compressor component Type Charge Heating Heating Main power supply Nom. Height/Width/ Depth Type Power supply
Phase/ Hz/V Frequency/ Voltage Ambient Min.~Max. CWB Min.~Max. C Water side Ambient Min.~Max. CDB Min.~Max. C Water side

kW kW mm kg

EDLQ011BB6W1 EDHQ011BB6W1 11.20 (1) 10.87 (2) 2.51 (1) 3.12 (2) 4.46 (1) 3.48 (2)
EDLQ014BB6W1 EDHQ014BB6W1 14.00 (1) 13.10 (2) 3.22 (1) 3.98 (2) 4.35 (1) 3.29 (2) 1,418/1,435/6W1 3~/50/400 -15~35 15~55 -15~43 25~80 R-410A 2.51 W1 3N 50 400
EDLQ016BB6W1 EDHQ016BB6W1 16.00 (1) 15.06 (2) 3.72 (1) 4.58 (2) 4.30 (1) 3.29 (2)
Nom. Nom. Name Phase Frequency Voltage

kg dBA dBA

monobloc SYSTEM
With bottom plate heater Without bottom plate heater Heating capacity Nom. Cooling capacity Power input Nom. Cooling Heating COP EER Dimensions Weight Hydraulic component Unit Unit Back-up heater current Height/Width/ Depth Type Power supply Nom. Nom.
reversible large capacity - single phase
EBLQ011BB6V3 EBHQ011BB6V3 11.20 (1) 10.87 (2) 12.85 (1) 10.00 3.78 (1) 3.60 (2) 2.47 (1) 3.22 (2) 4.54 (1) 3.37 (2) 3.39 (1) 2.78 (2) EBLQ014BB6V3 EBHQ014BB6V3 14.00 (1) 13.10 (2) 15.99 (1) 12.50 (2) 5.65 (1) 5.30 (2) 3.20 (1) 3.91 (2) 4.37 (1) 3.35 (2) 2.83 (1) 2.36 (2) 1,418/1,435/6V3 1~/50/230 -15~35 15~55 -15~43 25~80 R-410A 2.VEBLQ016BB6V3 EBHQ016BB6V3 16.00 (1) 15.06 (2) 16.73 (1) 13.10 (2) 6.28 (1) 5.85 (2) 3.79 (1) 4.62 (2) 4.22 (1) 3.26 (2) 2.66 (1) 2.24 (2)

Operation range

Domestic hot water Refrigerant Type Charge Sound power level Heating Cooling Sound pressure Heating level Cooling Compressor Main power component supply
Phase/ Hz/V Frequency/ Voltage Ambient Min.~Max. CWB Min.~Max. C Water side Ambient Min.~Max. CDB Min.~Max. C Water side kg dBA dBA dBA dBA
(1) cooling Ta 35C - LWE 18C (DT = 5C); heating Ta DB/WB 7C/6C - LWC 35C (DT = 5C) (2) cooling Ta 35C - LWE 7C ( DT = 5C); heating Ta DB/WB 7C/6C - LWC 45C ( DT = 5C )

reversible large capacity - three phase
EBLQ011BB6W1 EBHQ011BB6W1 11.20 (1) 10.87 (2) 12.85 (1) 10.00 (2) 3.78 (1) 3.60 (2) 2.51 (1) 3.12 (2) 4.46 (1) 3.48 (2) 3.39 (1) 2.78 (2) EBLQ014BB6W1 EBHQ014B6W1 14.00 (1) 13.10 (2) 15.99 (1) 12.50 (2) 5.32 (1) 4.98 (2) 3.22 (1) 3.98 (2) 4.35 (1) 3.29 (2) 3.01 (1) 2.51 (2) 1,418/1,435/6W1 3~/50/400 -15~35 15~55 -15~43 25~80 R-410A 2.52 W1 3N EBLQ016BB6W1 EBHQ016BB6W1 16.00 (1) 15.06 (2) 16.73 (1) 13.10 (2) 6.06 (1) 5.65 (2) 3.72 (1) 4.58 (2) 4.30 (1) 3.29 (2) 2.76 (1) 2.32 (2)
Stainless steel domestic hot water tank Casing Colour Material Weight Unit Empty Tank Water volume Material Maximum water temperature Heat exchanger Quantity Tube material Booster heater Capacity Power supply Phase/Frequency/Voltage Enameled steel domestic hot water tank Casing Colour Material Weight Unit Empty Tank Water volume Material Maximum water temperature Booster heater Capacity Power supply Phase/Frequency/Voltage EKHWS150B3V3 EKHWS200B3V3 EKHWS300B3V3 Neutral white Epoxy-coated mild steel Stainless steel (DIN 1.4521) Duplex steel LDX EKHWS200B3Z2 EKHWS300B3Z2

kg l C

37 150

45 200

59 300

kW Hz/V EKHWE150A3V3

1~/50/230 EKHWE200A3V3
2~/50/400 EKHWE300A3V3 EKHWE200A3Z2 EKHWE300A3Z2 RAL9010 Epoxy coated steel Enamel coated steel acc.DIN4753TL3.0 2~/50/400

kg l C kW Hz/V

80 150

104 200

1~/50/230

Room thermostat

Wired room thermostat Dimensions Unit Weight Ambient temperature Temperature setting range Unit Storage Operation Heating Cooling EKRTWA Height/Width/ Depth Min./Max. Min./Max. Min./Max. Min./Max. mm g C C C C 87/125/-20/60 0/50 4/37 4/37 Yes Proportional band Battery powered 3* AA-LR6 (alkaline) Wired
Clock Regulation function Power supply Voltage Connection Type
Wireless room thermostat Dimensions Thermostat Receiver Weight Ambient temperature Temperature setting range Thermostat Receiver Storage Operation Heating Cooling
EKRTR1 Height/Width/ Depth Height/Width/ Depth mm mm g g C C C C 87/125/34 170/50/125 -20/60 0/50 4/37 4/37 Yes Proportional band Battery powered 3x AA-LRG (alkaline) 1~ Wireless Wired approx.30m approx.100m
Min./Max. Min./Max. Min./Max. Min./Max.
Clock Regulation function Power supply Thermostat Receiver Frequency Phase Connection Thermostat Receiver Maximum distance Indoor to receiver Outdoor

Voltage Voltage

V V Hz
Solar connection Dimensions Weight Operation range Unit Unit Ambient temperature Nom. HeightxWidthxDepth Min.~Max. mm kg C dBA % Hz/V EKSOLHWAV1 770x305x1~1~/50/220-240 Indoor unit
Sound pressure level Thermal Zero loss collector efficiency 0 performance Power supply Phase/Frequency/Voltage Power supply intake

Accessory Mounting Dimensions Thermal performance Control Sensor
HeightxWidthxDepth Unit Zero loss collector efficiency 0 Type Power consumption Solar panel temperature sensor Storage tank sensor Return flow sensor Feed temperature and flow sensor Frequency;Voltage
EKSR3PA On wall 332x230x145 Digital temperature difference controller with plain text display 2 Pt1000 PTC PTC Voltage signal (3.5V DC) 50;230

Power supply

Solar collector Dimensions Weight Volume Surface Unit Unit Outer Aperture Absorber HeightxWidthxDepth mm kg l m m m EKSV26P 2,000x1,300x2.1 2.601 2.364 2.354 Micro-therm (absorption max.96%, Emission ca. 5% +/-2%) Harp-shaped copper pipe register with laser-welded highly selective coated aluminium plate Single pane safety glass, transmission +/- 92% 15~200 78.7 4,270 0.0070 6.5 0.94 Vertical Horizontal 1.7 EKSH26P 1,300x2,000x85
Coating Absorber Glazing Allowed roof angle Operating pressure Stand still temperature Thermal performance
Min.~Max. Max. Max. Zero loss collector efficiency 0 Heat loss coefficient a1 Temperature dependence of the heat loss coefficient a2 Thermal capacity Incident angle AM at 50 modifier

bar C % W/m.K W/m.K kJ/K

Installed position
Indoor units Heating capacity Cooling capacity
Power input Dimensions Weight Piping connections Sound pressure level Power supply
Total capacity Total capacity Sensible capacity Heating Cooling Unit
Nom. Nom. Nom. Nom. Nom. Height/Width/ Depth
kW kW kW kW kW mm kg mm/inch dBA dBA Hz/V
FWXV20AVEB 2.0 1.7 1.4 0.015 0.015 600/700/18/G 1/2/G 1/29 1~/50/60/220-240/220
FWXV15AVEB 1.5 1.2 0.98 0.013 0.013
Unit Drain/OD/Inlet/Outlet Heating Nom. Cooling Nom. Phase/Frequency/Voltage
(1)Cooling: indoor temp. 27CDB, 19CWB; entering water temp. 7C, water temperature rise 5K.(2)Heating: room temperature 20CDB and entering water temperature 45C, water temperature drop 5K.
(1) Cooling: indoor temp. 27CDB, 19CWB; entering water temp. 7C, water temperature rise 5K. | (2) Heating: room temperature 20CDB and entering water temperature 45C, water temperature drop 5K.
Daikin Altherma high temperature

Indoor units

Indoor units Heating capacity Nom. kW EKHBRD011ABV(1) 11 (2) 11 (3) 3.57 (1) 4.40 (2) 2.61 (3) 3.08 (1) 2.50 (2) 4.22 (3) EKHBRD014ABV(1) 14 (2) 14 (3) 4.66 (1) 5.65 (2) 3.55 (3) 3.00 (1) 2.48 (2) 3.94 (3) EKHBRD016ABV1 EKHBRD011ABY(1) 11 (1) 16 (2) 11 (2) 16 (3) 11 (3) 5.57 (1) 3.57 (1) 6.65 (2) 4.40 (2) 4.31 (3) 2.61 (3) 2.88 (1) 3.08 (1) 2.41 (2) 2.50 (2) 3.72 (3) 4.22 (3) Metallic grey Precoated sheet metal 705/600/695 144.25 -20~20 25~80 -20~35 25~80 R-134a 3.(1) 46 (2) 40 (1) 45 (1) 46 (2) 43 (1) V1 1~ Hz V A 50 220-380-46 (1) 46 (2) 45 (1) 43 (1) 46 (2) 40 (1) 45 (1) 46 (2) 43 (1) Y1 3~ 46 (1) 46 (2) 45 (1) 147.25 EKHBRD014ABY(1) 14 (2) 14 (3) 4.66 (1) 5.65 (2) 3.55 (3) 3.00 (1) 2.48 (2) 3.94 (3) EKHBRD016ABY(1) 16 (2) 16 (3) 5.57 (1) 6.65 (2) 4.31 (3) 2.88 (1) 2.41 (2) 3.72 (3)

ECPEN11-721A XXX 02/11 Copyright Daikin The present publication supersedes ECPEN11-721. Printed on non-chlorinated paper. Prepared by La Movida, Belgium Resp. Ed.: Daikin Europe N.V., Zandvoordestraat 300, B-8400 Oostende
Daikins unique position as a manufacturer of air conditioning equipment, compressors and refrigerants has led to its close involvement in environmental issues. For several years Daikin has had the intention to become a leader in the provision of products that have limited impact on the environment. This challenge demands the eco design and development of a wide range of products and an energy management system, resulting in energy conservation and a reduction of waste.
The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V. Daikin Europe N.V. has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin Europe N.V.

HIGH TEMPERATURE

Daikin Altherma HT Air Source Heat Pump
the energy efficient home heating system
Daikin Altherma is a highly flexible, energy efficient home heating system that extracts the heat from the outside air, raises this heat to a higher temperature and then distributes warmth around the home. At the heart of the system lies an air to water heat pump. Because of this advanced technology, three quarters of the heat generated by the Daikin Altherma system is from a renewable energy source, the air around us, and therefore absolutely free of charge! The Daikin Altherma air to water heat pump is todays answer to the current and future problems associated with conventional heating systems, such as, increasing primary energy costs and an unacceptably high environmental impact.
LESS ENERGY, PLEASANT WARMTH IN THE HOME Daikin Altherma operates 3 to 5 times more efficiently than a traditional heating system based on fossil fuels or electricity. By making use of the heat in the outside air, you use far less energy while still enjoying a stable and pleasant level of comfort. Also, maintenance requirements are minimal ensuring low running costs. Thanks to the inverter technology and in-built weather compensation control Daikin Altherma uses; energy savings are even greater than most other heat pump systems. HIGH PERFORMANCE Thanks to the cascade technology of Daikin Altherma HT, a temperature of 80oC can be reached without an additional electric heater. Daikin Altherma HT can be configured for use in both new and refurbishment applications, and connects to standard high temperature radiators. If you already have a heating system, there is no need to change your heat emitters. COMPLETE COMFORT FOR YOUR FAMILY Daikin Altherma satisfies all your heating and domestic hot water requirements right through the year even on the coldest days. With a fully integrated control system, Daikin Altherma will provide consistent comfort with optimum efficiency.
3 rop in replacement for existing boiler D 50% reduction in CO2 emissions ow running costs L 3 ow maintenance L 3 o groundwork i.e. trenches or boreholes N 3 o gas supply, flues or ventilation required N 3 o fuel storage tanks required N 3 omparable installation costs to gas fired boilers C 3 uitable for both apartments & houses S 3 ingle phase power supply with low starting current S 3 eather compensation built in as standard W 3 elps achieve 3 stars rating or higher in the code H for sustainable homes 3 educed VAT for domestic applications down to 5% R
Combination outdoor indoor OUTDOOR UNIT SINGLE PHASE Nominal capacity Nominal input COP Operation range

Sound power level

ERSQ011AAV1 Heating Heating Heating Domestic water Heating HxWxD R-410A kW kW C C dBA dBA mm kg kg A EKHBRD011AAV1 HxWxD mm kg C 11 3.57 3.08
ERSQ014AAV4.66 3.00 -20 to +20 -20 to +x 900 x 4.5 1~/230V/50Hz 32 EKHBRD014AAVx 600 x 695 144.25 25-80 without electrical heating Yes Precoated sheet metal

ERSQ016AAV5.57 2.88

Sound pressure level Heating
Dimensions Weight Refrigerant charge Power Supply Recommended fuses INDOOR UNIT

EKHBRD016AAV1

FUNCTION HEATING ONLY Dimensions Weight Leaving Water Temp Drain Valve/Fill Valve Material Measuring conditions - EW: 55C; LW: 65C; dT: 10C; ambient conditions: 7CDB/6CWB
Combination Table Indoor - Accessories Stainless steel DHW cylinder (unvented) Wired remote control Wireless remote control EKHTSU200AA EKHTSU260AA EKRTW EKRTR + EKRTETS

EKHBRD011AAV1

EKHBRD014AAV1

EKHBRD016AAV1

3 ighly efficient: CoPs of over 3 in H high temperature 3 ascade technology: 80C can be C reached without an additional electric heater 3 o loss of capacity in the UK climate N 3 etallic casing newly designed M

Radiators

3 nstallation benefits thanks to design I of hydrobox and hot water cylinder Hydraulic components already included 3 ast hot water cylinder recovery times F
Fan Coils Room Thermostat Outdoor Unit Indoor Unit and Hot Water Cylinder
Daikin products are distributed by:
The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin UK. Daikin UK has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin UK explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin UK.
Daikin units comply with the European regulations that guarantee the safety of the product.
Daikin Airconditioning UK Ltd The Heights, Brooklands, Weybridge, Surrey KT13 0NY Tel Fax 0845 6419009
UKEPLEN09-724 / 06.09 / Swim. Copyright 2009 Daikin. Printed in the UK on paper that is 50% recycled and 50% from sustainable sources.

www.altherma.co.uk

Visit www.microgenerationcertification.org for a list of the latest MCS certified Daikin heat pumps