Fort Pierce Florida 34948 FL http://www.centralmasshomewarranty.com Air Cleaner Manuals Danby Air Cleaner Manuals Air Ionizer, Air Purifier, Electrostatic Air Cleaner, Furnace Air Filter, HEPA Air Purifier Danby Air Cleaner Manuals
Silhouette Portable 3-in-1 HOME COMFORT OWNER'S MANUAL DDR556RH Danby Air Cleaner Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Air Cleaner Manuals Air Ionizer, Air Purifier, Electrostatic Air Cleaner, Furnace Air Filter, HEPA Air Purifier Silhouette Portable 3-in-1 HOME COMFORT OWNER'S MANUAL DDR556RH Danby Air Cleaner Manuals

Danby Products Limited PO Box 1778, 5070 Whitelaw Road, Guelph, Ontario, Canada N1H 6Z9 Tlphone : (519) 837-0920 Tlcopieur : (519) 837-0449 1
Danby Products Inc. PO Box 669, 101 Bentley Court, Findlay, Ohio, U.S.A. 45839-0669 Tlphone : (419) 425-8627 Tlcopieur : (419) 425-8629

GUIDE DE DPANNAGE

Frquemment, des problmes mineurs peuvent survenir et un appel de service pourrait ne pas tre ncessaire. Utiliser ce guide de dpannage pour identifier les problmes qui pourraient se manifester. Si lappareil ne fonctionne toujours pas correctement, appeler votre centre de service DanbyMD local ou composer le 1-800-26-DANBY (1-800-263-2629) pour assistance.

Introduction

Thank you for choosing this Danby appliance to provide you and your family with all of the Home Comfort requirements for your home, cottage or office. This Owners Manual will provide you with valuable information necessary for the proper usage, care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation. Please take a few moments and read the instructions thoroughly and familiarize yourself with all of the operational aspects of this appliance. This unit can be conveniently moved from room to room within your home and set-up in just minutes. For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along with the following information which is located on the manufacturers nameplate located on the rear wall of the water tank compartment. Model Number: ___________________________________________________ Serial Number: ___________________________________________________

PROBLME

Lappareil ne fonctionne pas.

CAUSE POSSIBLE

Vrifier le branchement du cordon dalimentation. Vrifier lalimentation de la prise de courant (fusible grill?). Dterminer si le rservoir deau est plein (vider). Vrifier que le rservoir deau est correctement install dans lappareil.
Capacit de dshumidification (limination de lhumidit) insuffisante.
Temprature ambiante trop basse (infrieure 6C / 42.8 F) Circulation dair mdiocre / obstruction de la grille avant. Humidit relative ambiante trs basse.
Date of Purchase: _________________________________________________ Dealers Name and Address: ________________________________________ ________________________________________
Le niveau dhumidit relative choisi nest pas atteint aprs une longue priode de fonctionnement.
Vrifier que toutes les portes et fentres sont fermes. La pice est trop grande pour la capacit de lappareil.
This information will be required if your unit requires servicing and/or for general inquiries. To contact a Customer Service Representative, telephone
1-800-26-DANBY (1-800-263-2629)
Keep these instructions for future reference.
This symbol denotes a caution or warning

CAUTION

Do not leave this unit unattended or operate in an area where people or animals may not be able to react quickly. A failed unit may cause over-heating reaulting in personal injury or property damage.
WARNING - IMPORTANT NOTICES
Drainage direct (Mode dshumidification SEULEMENT) :

Soins et entretien

MISE EN GARDE : Avant de nettoyer ou de faire le service sur cette unit, il est recommand de dbrancher le cordon dalimentation de la prise de courant lectrique. 1. NE PAS UTILISER dessence, de benzne, de diluant ou tous autres produits chimiques pour nettoyer cette unit. Ces substances pourraient causer des dommages au fini et une dformation des pices en plastique. Ne jamais tenter de nettoyer lunit en versant de leau directement sur lune ou lautre des surfaces car ceci causera une dtrioration des pices lectriques et de lisolation des fils. Utiliser uniquement de leau tide, un dtergent vaisselle et un chiffon doux pour essuyer compltement les surfaces externes de lappareil et le scher soigneusement.
NOTE: The WARNING instructions issued in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors that cannot be built into all appliances. These factors must be supplied by the person(s) installing, maintaining, or operating the appliance. Failure to install, maintain, and/or operate the equipment according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. Contact your dealer, service agent or the manufacturer about any problems or conditions you do not fully understand. (For Danby Customer Service call 26 DANBY / 263 2629)
Cet appareil comporte une caractristique de drainage direct situe au ct gauche infrieur, larrire du cabinet. REMARQUE : Le boyau de drainage avec raccordement est fourni avec lappareil. Cette fonction de drainage est destin lusage dans les sous-sols quips dun drain de plancher seulement. NOTE: Ne pas tenter de raccorder la sortie de drainage direct une tuyauterie dvacuation installe au-dessus du niveau du sol.
ORIFICE DE DRAINAGE DIRECT
FOR YOUR SAFETY - To reduce the risk of fire or explosion, do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

Remisage

ELECTRICAL SERVICE INFORMATION - To reduce the risk of fire, electric shock or personal injury, all wiring
and grounding must conform with the latest edition of Local and National Electrical Codes It is the customer's responsibility to have the wiring and fuses checked by a qualified electrician to make sure adequate electrical power is available. This appliance is designed to operate on a separate branch, polarized, three-wire, effectively grounded, 120 Volt 60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fusetron or circuit breaker. The three-prong grounding plug on the power cord should be plugged directly into a polarized three slot effectively grounded receptacle rated 110/120 V.A.C.

Quand cet appareil nest pas utilis pour des priodes prolonges, sil vous plat observer les directives suivantes. 1. Dbrancher le cordon dalimentation de la prise de courant. 2. Vider le rservoir deau, essuyer soigneusement les surfaces. 3. Nettoyer soigneusement le filtre air.

(Vue arrire)

RACCORDEMENT POUR DRAINAGE DIRECT : 1. Dvisser le bouchon du raccord de drainage direct larrire de lunit. 2. Couper un boyau de drainage la longueur approprie selon vos besoins. Raccorder le boyau darrosage directement sur le drain direct et resserrer. 3. Placer lextrmit ouverte du boyau darrosage directement au-dessus du drain de plancher et mettre lappareil en marche. 4. Placer le dshumidificateur aussi prs que possible du drain de plancher. 5. Quand loption de drainage direct nest pas utilise, enlever le boyau de drainage et rinstaller le bouchon.
4. Remettre lappareil dans son emballage dorigine. 5. Remiser lappareil verticalement, dans un endroit sec.
GROUNDING INSTRUCTIONS - Improper connection of the equipment-grounding conductor can result in a risk of
electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your appliance outlets are properly grounded. This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord having an equipment-grounding conductor and 3 prong grounding plug. The plug must be connected into an outlet that is properly installed and grounded in the accordance with all local codes and ordinances. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. If the household electrical supply does not meet the above specifications, or if you are not sure your home has an effective ground, have a qualified electrician or your local electrical utility company check it and correct any problems.

I/O Button : Each time this button is pressed turns the unit On/Off. Fan Button: Each time this button is pressed the fan speed will alternate between HIGH FAN & LOW FAN. IMPORTANT : Ne jamais modifier ou tenter de contourner le mcanisme dinterrupteur du flotteur. (Ceci causerait le dbordement du rservoir.) Rglage implicite de lusine : Quand lappareil est branche pour la premire fois, la carte du circuit lectronique adoptera automatiquement par dfaut, les rglages implicites de lusine suivants. Mode : Dshumidification Valeur dhumidit : 60% Vitesse du ventilateur: Basse REMARQUE : En cas de panne de courant, tous les rglages antrieurs sont automatiquement effacs/annuls. Si le rglage tait diffrent de celui utilis par dfaut (dcrit ci-dessus), il sera ncessaire de reprogrammer lappareil. Si lappareil est mis hors de service manuellement et quil est remis en service (en utilisant la touche on/off du clavier) lunit reviendra toujours au dernier rglage de programme choisi. Timer Button: Used to initiate a delayed start on time and/or delayed off stop time. Pressing the button while the unit is off will allow you to set the delayed start on timer. Pressing the button while the unit is on will allow you to set the delayed stop off timer. This button allows you to decrease the timer length, relative humidity or temperature settings. Each time the button is pressed during; TIMER: the timer value will decrease by 0.5hrs from10 hrs down to 0.5 hrs. then 1.0 hr increments from 24 hrs. down to 10 hrs. DRY MODE: the SET RH% value will decrease by 5%. (adjustable values between 80% ~30%) HEAT MODE: the temperature value will decrease by 1 Celcius or Fehrenheit. (32C/90F ~ 18C/ 64F) This button allows you to increase the timer length, relative humidity or temperature settings. Each time the button is pressed during; Rglage implicite modifi par utilisateur: Quand vous modifiez un ou tous les arrangements de dfaut d'usine, vos nouveaux arrangements deviennent les arrangements de dfaut courants. Quand l'unit est mis hors de service manuellement ou en cas d'une panne de courant, tous vos arrangements modifi sont maintenus et puis reconstitus une fois quelalimentation de courant est rtablie ou l'unit est manuellement mise en service. TIMER: the timer value will increase by 0.5hrs up to 10 hrs. then 1.0 hr increments from 10hrs. up to 24hrs. DRY MODE: the SET RH% value will increase by 5%. (adjustable values between 30% ~80%) HEAT MODE: the temperature value will increase by 1 Celcius or Fehrenheit. (18C/64F~32C/90F)
Mode Button: Each time this button is pressed will alternate between dehumidifier, heat and fan mode. The symbol for the mode selected will appear in the LED display LED READOUT: The LED displays the following information: 1. ROOM AIR = Room Ambient RH% or Temperature Conditions 2. SET AIR = The Set Operating RH% or Temperature Value. 3. MODE: = The selected operating mode;

DRY HIGH ON

FAN LOW OFF
4. FAN SPEED = The selected fan speed. 5. TIMER = The selected delayed start on/stop off time.

0.0 TIMER

LENGTH
Caractristiques de tlcommande
Indicator Light Function:
Arrow Symbols (Operation - Blue Light): This light illuminates and remains illuminated as long as the unit is operational. Bucket Symbol (Water Full - Red Light): This light illuminates under the following conditions; 1. When the internal water tank is not properly installed inside the cabinet. 2. When the internal water tank is full. Water tank must be emptied and replaced back in the cabinet before normal operating conditions can resume. Water Tank Operation: Proper installation of the water tank is crucial in maintaining reliable dehumidifier operation. The water tank holds accumulated condensed water routed from the evaporator (cooling) coil during dehumidifier operation.The water level inside the tank is controlled by a float switch mechanism that automatically stops dehumidifier operation when the water level reaches a predetermined level. When the water tank is full and /or incorrectly positioned inside the cabinet, the (water full) red light flashes and a signal (beep) sounds for 10 seconds.This condition results in the immediate shut down of the dehumidifying system. (compressor cycle terminated, however the fan motor will continue to operate) The water tank must be emptied and/or correctly re-positioned before dehumidifier operation can resume NOTE: It may take several minutes before operating conditions resume. This is normal. IMPORTANT: Never tamper with or attempt to defeat the float switch mechanism. (as this will result in flooding) Factory Default Setting: When the unit is first connected to a power supply, the electronic circuit board will automatically default to the following factory settings; Mode: Dehumidification Humidity SET AIR Value: 60% Fan Speed: Low Custom Default Setting: When you modify any or all of the factory default settings , your new settings become the current default settings. When the unit is switched "Off or in the event of a power failure, all your custom settings are retained and then restored once the power is switched On/resumes.
La manette de tlcommande vous permet de contrler toutes les fonctions de votre dshumidificateur partir de votre fauteuil favori. Voici quelques informations utiles pour lutilisation de votre tlcommande.

Boutons de contrle

I/O Commutateur de courant (En marche / Arrt) MODE Utilis pour choisir le mode de fonctionnement (dshumidification / ventilateur /chauffage). Utilis pour choisir la vitesse du ventilateur (HAUTE / BASSE). chaque fois que le bouton est press, laffichage alternera entre VENTILATEUR HAUTE ou BASSE. Est utilis pour rduire les rglages. (Voir la page 6 pour des dtails). Est utilis pour augmenter les rglages (Voir la page 6 pour des dtails). Utilis pour amorcer une mise en service et/ou une mise hors de service temporise. Deux piles alcalines AAA (1,5 volts) sont requises pour le fonctionnement de la tlcommande (incluses).

Touche Mode : chaque fois que cette commande est presse, le mode de fonctionnement alternera entre dshumidificateur, ventilateut et chauffage. Le symbole pour la mode choisi apparatra sur lcran daffichage diodes. AFFICHAGE DIODES : Lcran daffichage indique linformation suivante : 1. Conditions actuelles ambiantes du % dhumidit ou temprature relative de la pice. 2. La valeur de fonctionnement rgle du % dhumidit ou temprature relative. 3. Le mode de fonctionnement choisi;
Used to adjust (decrease) setting values. (See page 6. for details) Used to adjust (increase) setting values. (See page 6. for details) Used to initiate a delayed start on time and/or delayed stop off time.
F / C Used to switch temperature readings (LED
To operate the hand held remote control will require two AAA(1.5 volt) Alkaline batteries (included ). Batteries should be replaced when: a) No signal (beep) is heard from the main unit when pressing the buttons on the remote control while attempting to program the main unit. b) The main unit does not respond to the any of the commands issued by the remote control unit. Battery replacement: 1. Open the rear cover on the backside of the remote control unit in the direction of the arrow. Continue pulling (gently) until the cover separates completely from the unit. 2. Replace the (2) batteries AAA (1.5 volts) following the same orientation (polarity) as depicted inside the battery chamber.(+/-) 3. Re-install lower cover. 4. If the remote control will not be used for extended periods of time (vacations etc.), batteries should be removed. The remote operates within a range of 7 meters (23 ft.) from the receiver located inside the main unit. Any obstruction between the receiver and remote may cause signal interference, limiting the ability to program the main unit.

Sec Haute

Ventilateur Basse

Chauffage

4. La vitesse du ventilateur choisi;
readout display) from Celsius to Fahrenheit. Each time button is pressed will alternate between both temperature scales.
5. Lheure choisie de la mise en service / hors de service temporise;

En Marche

Rglage du Minutrie
Location: Select a suitable location, making sure you have easy access to an electrical outlet. (avoid the use of extension cords) If it is absolutely necessary to use an extension cord, use an approved "air conditioner heavy duty extension cord only. (available at most local hardware stores) Select a suitable location making sure there are no obstructions restricting airflow through the front air intake grill. Maintain a minimum clearance of a least 20cm (8) between adjacent walls and the back of the unit to allow for proper air circulation and maximum efficiency. To obtain maximum operating efficiency from your dehumidifier, the recommended (room ambient) operating temperatures should be between 6C / 42.8F ~ 35C / 95F. It is important to remember the efficiency of a dehumidifier will be effected /influenced by the rate at which new humid air (moisture) is allowed to infiltrate the same space/area. To maintain efficiency, the dehumidifier must be operated in an enclosed area. Keep all doors and windows closed.

CARACTRISTIQUES

Clavier de commande tactile (lectronique) (illumin) Affichage diodes (LED) Auto-dtection de lhumidit relative et temprature ambiante. Rglage selon lhumidit relative ambiante (35% - 80% constante). Rglage s du temprature ambiante (18C/64F ~ 32C/90F). Ventilateur 2 vitesses (haute/basse) Protection de mise en marche temporise - (compresseur) Auto-dgivrage Redmarrage automatique (En cas de panne de courant) Fonctionnement basse temprature Homologu Energy Star Afficheur rservoir deau plein et signal sonore Roulettes pivotantes Easy Roll (4) Rservoir deau mont lavant (amovible) Option de drainage direct (boyau non compris) Style europen Fonctionnement silencieux Filtre air amovible

Pices de lappareil

Tableau de commande
Poigne Entre dair Panneau latral

Panneau de faade

Rservoir deau avant
Roulettes pivotantes Easy Roll
Circuit dalimentation lectrique - Spcifications

Operating Instructions

Factory Default Setting: When the unit is first connected to a power supply, the electronic circuit board will automatically default to the following factory settings; Mode: Dehumidifier Humidity Set Air Value:60% RH Fan Speed: = Low NOTE: In the event of a power failure or the unit is switched Off, the most recent settings are retained and restored once the power is switched On/resumed. IMPORTANT NOTE: Depending on the ambient humidity or temperature conditions (subject to the last operating mode), when power is restored or switched On the dehumidifier or heater may not start automatically under the factory or custom (see page 7) default setting. This is an indication that the ambient temperature or RH% level of the surrounding environment is lower than the current default setting and it may be necessary to select a lower set temperature or RH% value. DRY OR HEAT MODE SELECTION: 1. The unit does not have to be switched on (operational) to select/set a program. All programs can be selected with the unit in the off position. FAN ONLY MODE SELECTION: 1. Press the MODE button until the fan blade symbol is shown in the mode area of the display. 2. Press the "Fan symbol on the keypad. Each time the button is pressed, the mode selection will alternate between "High Fan" and "Low Fan" speed options. 3. When all settings are complete, press the on/off button to start fan mode operation and the blue operation light will illuminate. AIR FILTER: Your dehumidifier features a removable Air Filter. This filter is located at the front of the unit (behind the front air intake grill) The air filter plays an important role in helping to reduce (minimize) dust/dirt particles from the surrounding environment. A blocked/clogged air filter reduces air flow impacting negatively on operating efficiency. To maintain maximum operating efficiency; The filter must be checked and cleaned regularly. (every 2 weeks) More frequent cleaning may be required depending upon indoor air quality. IMPORTANT: Never operate the unit without the air filter in place. AIR FILTER REMOVAL: 1. Locate the air filter (handle) tab on the upper right side of the front air intake grill and slide-out the filter to the right. 2. Clean the filter thoroughly using a vacuum cleaner or wash using luke warm water and mild detergent. Dry thoroughly before re-installing. 3. To re-install the air filter, slide the filter back inside the tracks until it snaps (locks) into position.

MISE EN GARDE

Ne jamais laisser cet appareil en marche dans un endroit ferm o des personnes ou animaux qui ne peuvent pas ragir une dfectuosit de lappareil se trouvent. Un appareil en panne peut occasionner la surchauffe extrme de cet appareil et causer des blessures corporelles ou des dommages la proprit.

Table des matires

LIMITED PRODUCT WARRANTY
This quality product is warranted to be free from manufacturers defects in material and workmanship, provided that the unit is used under normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY Plastic parts are warranted for thirty (30) days only from purchase date, with no extensions provided.

First Two Years

Third Through Fifth Year
To obtain Service (Carry-In Service)
During the first two years (2), any electrical part(s) of this product found to be defective, including any sealed system units, will be repaired or replaced, at warrantors option, at no charge to the ORIGINAL purchaser. Consumable parts (ie. light bulbs when applicable) are not warranted or guaranteed for any length of time. During the next three years (3) any part of the sealed system found to be defective (consisting of compressor, condenser, evaporator, dryer and all related tubing) will be replaced without charge, however, all labour charges associated with the replacement of the sealed system componets will be the sole responisbilty of the purchaser. The purchaser shall pay for all labour and return freight during this period for repair or replacement of any sealed system components. Any unit being diagnosed as non-repairable due to sealed system failure and warranting an exchange will be subject to an appropriate depreciation or user fee, including any and all freight charges being levied against the purchaser. It will be the customers responsibility to transport the appliance to the closest Authorized Service Depot at their own expense. Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service must be per formed by a qualified service technician. If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial application, all obligations of Danby under this warranty shall be at an end.
Introduction. Avertissement - Avis importants. Spcifications de l'appareil. Caractristiques et pices de l'appareil. Fonctions des touches du tableau de commande lectronique. Tlcommande. Choix de l'emplacement et instructions d'installation. Instructions d'utilisation / retrait du filtre. Soins et entretien. Drainage direct. Remisage. Guide de dpannage. Garantie.

EXCLUSIONS Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.), there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby Products or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A), shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and save harmless Danby Products Limited from any claim for damages to persons or property caused by the unit. GENERAL PROVISIONS No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: 1) Power Failure. 2) Damage in transit or when moving the appliance. 3) Improper power supply such as low voltage, defective house wiring or inadequate fuses. 4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions, (extremely high or low room temperature). 5) Use for commercial or industrial purposes. 6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc. 7) Service calls resulting in customer education. Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.
Danby Products Limited PO Box 1778, 5070 Whitelaw Road, Guelph, Ontario, Canada N1H 6Z9 Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc. PO Box 669, 101 Bentley Court, Findlay, Ohio, U.S.A. 45839-0669 Telephone: (419) 425-8627 FAX: (419) 425-8629 14