West Lynn Massachusetts 01905 MA http://www.centralmasshomewarranty.com Air Cleaner Manuals Danby Air Cleaner Manuals Air Ionizer, Air Purifier, Electrostatic Air Cleaner, Furnace Air Filter, HEPA Air Purifier Danby Air Cleaner Manuals
Danby PORTABLE 3-IN-1 HOME COMFORT Model DHCC6020 OWNER'S MANUAL DHCC6020 Danby Air Cleaner Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Air Cleaner Manuals Air Ionizer, Air Purifier, Electrostatic Air Cleaner, Furnace Air Filter, HEPA Air Purifier Danby PORTABLE 3-IN-1 HOME COMFORT Model DHCC6020 OWNER'S MANUAL DHCC6020 Danby Air Cleaner Manuals

1. Power Button: Toggles the unit on/off. 2. Mode display area: Icon(s) represent the current mode of operation.
10. Set humidity display: Displays the set humidity level for the Dehumidifier or Humidifier. 11. Decrease button: Used to adjust Timer settings backwards (0.5 /1hr. increments). Used to adjust Humidity settings backward (5% increments).
3. Power Indicator light: Solid light signifies that
the unit is in operation.
4. Fan Speed Icons: Shows which fan speed is in

use (High/Low).

12. Timer Display: Shows the selected delayed

start or stop time.

Drainage Directe
Le fonctionnement de vidange directe est prvu pour les applications de tuyau de drainage au plancher seulement. Le fonctionnement de drainage direct ne devrait pas tre utilis en applications de tuyauterie surleve ou dvier.
5. Warning Indicator: Illuminates when the unit enters a fault mode. (see pg 13 for details) 6. Water level display: Shows the current water
level of the internal bucket.
13. Remote control sensor 14. Increase button: Used to adjust Timer settings
forwards (0.5 /1hr. increments). Used to adjust Humidity settings forward (5% increments).
7. Ambient Temperature and Humidity display:
Shows current room humidity and/or temperature conditions. Also displays error codes when the unit enters a fault mode.
8. Fan Speed Button: Alternate between High and Low fan speeds. Not used during humidification mode. 9. Timer Button: Used to initiate a delayed start
on time or delayed stop off time.
15. Mode selection button: This button is pressed to alternate between available operating modes. The symbol for the mode(s) selected will appear in the LED display (see Display icons. on pg 7 for details).
1. Retirer (dvisser) le bouchon (Grand) de vidange larrire. (Fig D) 2. Installer le boyau de vindage sur le raccord de vidange directe. 3. Placer lextrmit ouverte du boyau darrosage directement au-dessus du drain de plancher et mettre lappareil en marche. 4. Placer le dshumidificateur aussi prs que possible du drain de plancher. 5. Quand loption de drainage direct nest pas utilise, enlever le boyau de drainage et rinstaller le bouchon.

AUTO-TIMER

While the appliance is off (Auto-On):
While the appliance is on (Auto-Off);
1. Press the Timer button once and the adjacent Auto-Off O icon will illuminate. 2.Use the control cursors or to select a delayed Off time of up to 24 hours. 3. The time you selected will appear in the LED display
1. Press the Timer button and the Auto-On I icon adjacent to The Auto-Timer mode may the timer length will illuminate.
be activated on the control panel (of the unit) or with 2. Use the control cursors or to select a delayed On the Remote Control.
time of up to 24 hours. 3. Select the appropriate mode under which you want the unit to operate (HumidifyDehumidify or Air Purification) 4. Select the fan speed setting. 5. The time you selected will appear in the LED display.
The Timer may be cancelled at any time by turning the unit On/Off.
Operating Instructions Les Icnes D'Affichage

Remote Control

The remote control allows you to define all operational aspects of your Danby Home Comfort Center. CONTROL BUTTONS
Power Button: Toggles the unit on/off. MODE: Selects the operating mode (Dehumidifier, Humidifier, Air Purification Dehumidifier + Purification, Humidifier + Purification) Fan: Alternates the fan speed between High and Low. : Used to adjust Humidification and Dehumidification settings forward in increments of 5% RH.

8.8 Ventilateur

Ventilateur Haute
Humidificateur Signifie le mode 'humidification est en fonction. Dshumidificateur Signifie le mode dshumidification est en fonction. Purification D'Air Signifie le mode purification dair est en fonction. Remplacez le Cartouche de Dminralisation Rfrez la page 24 pour dtails Remplacez le Filtre de Purification D'Air Rfrez la page 24 pour des dtails

Ventilateur Basse

Niveau Deau Montre le niveau d'eau courant dans le rservoir interne. Minutrie Montre le temps choisi pour EN MARCHE AUTO 8.8 h ou ARRT AUTO. (voir ci-dessous pour des dtails).
: Used to reduce Humidification and
Dehumidification settings in increments of 5% RH. Timer: Allows you to initiate the auto-on or auto-off timer. Each subsequent depression of the Timer button with increase the timer length in increments or 0.5hrs up to 10 hours and by 1.0hr increments up to 24 hours. The AutoTimer setting may be cancelled at any time by pressing the remote control Power button. F/C: Alternates the display mode of the temperature between Fahrenheit and Celsius on the display panel of the unit (only)

To operate the hand held remote control you will require two AAA Alkaline batteries (included ). Batteries should be replaced when: a) No signal (beep) is heard when attempting to program the main unit. b) The main unit does not respond to a command issued by the remote control. Battery replacement: 1. Slide the lower front cover on the remote in the direction of the arrow. Continue pulling (gently) until the cover separates completely from the unit. 2. Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the battery chamber.(+/-) 3. Re-install the front cover. 4. If the remote control will not be used for extended periods of time (vacations etc.), batteries should be removed. Any obstruction between the receiver and remote may cause signal interference, limiting the ability to program the main unit.

MINUTRIE

Quand l'appareil est teint (En March Auto):
1. Appuyer sur la touche Minutrie et l'icne en marche auto I' adjecent au minutrie illuminera (voir ci-dessus). 2. Appuyer sur les touches ou pour choisir lheure de mise en marche (jusqua 24 heures). 3. Choisir le MODE appropri de fonctionnement dsir de lunit (Humid.Dshumid.Purification D'Air). 4. Choisir le rglage de la vitesse du ventillateur. 5. Le temps vous avez choisi apparatra sur l'affichage.
Quand l'appareil est en marche (Arrt Auto);
1. Appuyer sur la touche Minutrie et l'icne arrt auto O' adjecent au minutrie illuminera (voir cidessus) 2.Appuyer sur les touches ou pour choisir lheure de mise en service (jusqua 24 heures). 3. Le temps vous avez choisi apparatra sur l'affichage Pour annuler le programme simplement met lappareil en marche (annule arrt automatique), ou hors de service (annule en marche automatique).
Instructions de fonctionnement Commande de votre DHCC

Dehumidifier

The operating mode can be defined before the unit is switched On by depressing the Mode button (ensure the power cord is connected), and defining the desired operating mode while the control panel remains illuminated (approximately 5 seconds). 1) In high humidity conditions, in order to extend the period of uninterrupted use, ensure that the internal bucket is empty (Fig A) before starting the dehumidifying mode. 2) Depress the Mode button on the control panel until the Dehumidifier icon is displayed in the LCD screen (Fig B). 3) Select the desired humidity level from 35% RH ~ 80% RH by depressing either the increase ( ) or decrease ( ) buttons on the control panel. To select continuous instead of defining a specific humidity level, press the increase or decrease button until the - - symbol appears in the set humidity display portion of the LCD, as shown in Fig. C 4) Define the required fan speed (High/Low) by depressing the fan speed button. 5) Activate the power button to start the unit in Dehumidifier mode at your specified settings.

4. Position the dehumidifier as close While the unit is in dehumidifier mode and utilizing the direct drain as you can to the floor drain. application, if the drain hose cou5. When the direct drain feature pler becomes disconnected, the safety valve will close so that the is not in use,remove the drain water will accumulate in the hose and re-install cap. internal bucket. only.

Humidifier

The operating mode can be defined when the unit is On or in Standby. The following steps are provided assuming the unit is in standby mode. 1) Open the upper rear panel and locate the internal reservoir fill cap. Proceed to remove the fill cap (fig E.) from the reservoir. 2) Slowly fill the internal water reservoir with fresh clean water until the Water Level Display illuminates all four status bars to signify the tank is full (as shown in Fig G). 3) Replace the fill cap and close the upper rear panel. If you have removed the water tank during the fill process ensure that the handle on the internal reservoir has been returned to its original position - flat against the bucket. 4) Depress the Mode button on the control panel until the Humidifier icon is displayed in the LCD screen (Fig H). 5) Select the desired humidity level from 35% RH ~ 80% RH by depressing either the increase ( ) or decrease ( )buttons on the control panel. To select continuous as the mode of operation in lieu of defining a precise humidity level, press the increase or decrease button until see the - - in the set humidity display portion of the LCD, as shown in Fig. I. 6) Depress the power button to start the unit in Humidifier mode at your specified settings. Fill Cap

Identification des pices

5 1. Panneau Suprieure Fig H 2. Panneau De Commande lectronique 5. Roulettes 6. Rservoir Interne 7. Poigne Du Rservoir Interne 8. Bouchon de remplissage
Please note: During the Humidifier mode, the fan speed cannot be changed.
3. Poigne 4. Panneau de faade (amovible)
INFORMATIONS DE SCURIT IMPORTANTES INSTRUCTIONS DE MISE LA TERRE

AVERTISSEMENT

Une mauvaise utilisation de la mise la terre de la fiche constitue un danger dlectrocution.
Cet appareil doit tre mis la terre. Dans lventualit dun court-circuit, la mise la terre procure un chemin direct de contournement du courant pour prvenir llectrocution des manipulateurs de lappareil. Cet appareil est muni dun cordon comprenant une fiche et fil de mise la terre. La fiche doit tre branche
dans une prise correctement installe et mise la terre. Si les directives de mise la terre ne sont pas tout fait comprises ou en cas de tout doute relatif la mise la terre approprie de lappareil, faites appel un lectricien ou un technicien qualifi. Si la prise murale est une prise 2 branches, cest votre obligation, et la responsabilit vous en incombe, de la faire remplacer par une prise trois branches adquatement mise la terre. Pour un meilleur rendement et pour viter que les ampoules dclairage de la rsidence soient affectes dun affaissement de tension, ou que le fusible ou disjoncteur du circuit

ne grille ou ne se dclenche, ddiez un circuit individuel dalimentation la machine glaons (prise (double) unique sur le circuit). Sous aucun prtexte il est permis de couper ou denlever la troisime branche (mise la terre) de la fiche du cordon lectrique. Nutilisez pas dadaptateur de fiche avec cet appareil. Nutilisez pas de cordon de rallonge avec cet appareil. Si le cordon lectrique de lappareil ne rejoint pas la prise murale, faites installer une prise plus rapproche par un lectricien ou un technicien qualifi.

Air Purification

The Air Purification mode is used to increase air quality by reducing common household odors and allergens such as pollen, pet dander and dust. Air purification can operate individually or in conjunction with either the Dehumidifying or Humidifying modes. Fig J
Starting the Air Purification mode. 1) Depress the Mode button on the control panel until the Air Purification icon is displayed in the LCD screen (Fig J). 2) When required, you can operate the Air Purification mode simultaneously with the Dehumidifier or Humidifier by continually pressing the MODE button until the required combination of operating mode icons appear in the LCD display. For example, Air Purification/Dehumidifier (Fig K) or Air Purification/Humidifier (Fig L). 3) If you have selected the Air Purification mode to operate in conjunction with another mode, proceed to define the operating parameters for the selected operation. (Please refer to Dehumidifier on pg 9 or Humidifier on pg 10 for instructions). 4) Select the required fan speed (High/Low) by depressing the fan speed button. Please note: While operation the Air Purification mode simultaneously with another mode, the fan speed selection will be the same in all operating modes.
Spcifications de lappareil:
Capacit de dshumidification (Pintes/Litres) Capacit de humidification (Pintes/Litres) Alimentation lectrique Consommation dnergie Maximum (watts) Intensit nominale par mode Dshumidification Humidification Purification DAir Circulation dair Vitesse de ventilateur haute / basse (pi. cu. /min)(L/min) Capacit du rservoir deau -Dshumidificateur (litres / pintes) Capacit du rservoir deau -Humidificateur (litres / pintes) Niveau de bruit en fonctionnement (dB A) Poids net (kg/lb) 35 70,5 / 30,/ 12,/ 10,21,7 / 47,/ 28,/ 9,Volts / 60 Hz 815
5) Depress the power button to start the unit in Air Purification mode at your specified settings.
Do not attempt to operate the Air Purification mode in places such as a kitchen, garage, or work shed as airborn grease and oil particles are common in these environments and can damage the appliance. Do not attempt to run the Air Purification mode without the filter in place.
The Air Purification filter cannot be cleaned, and therefore must be replaced. The Air Purification filter should be replaced every 3 to 6 months depending upon usage and/or conditions. Replace the Air Purification filter only with one that was specifically designed for use with this appliance. Replacement filters are available from the retailer that the unit was purchased from, as well as any Danby authorized parts distibution center. Please call 1-800-263-2629 or visit www.Danby.com to find a location near you.

BOILER CHAMBER

WARNING - Do not attempt to clean the boiler chamber immediately after operating the unit in Humidification mode. 1. Open the top cover of the unit, and remove the internal tank with care. 2. Remove the Boiler cover and pull out the drain plug (Fig O) to allow any standing water to evacuate the chamber. 3. Clean the boiler chamber with a damp cloth.
4. Place a drip tray beneath the bottom drain and remove the small drain cap and plug located at the rear of the unit (Fig P) to drain out the remain ing water inside the appliance. 5. After completely drain ing the water from the unit replace the boiler chamber plug, drain plug and cap. 6. Replace the Boiler cover and internal water tank. * If Replace DMC Cartridge icon (pg. 7) is displayed: Press the Timer and Decrease button simultaneously on the control panel for 3 seconds to resume normal operation.
Boiler Cover Demineralizing Cartridge DMC

Boiler Chamber Plug

SAUVEGARDEZ CES INSTRUCTIONS

BIENVENUE

Bienvenue dans la famille Danby. Nous sommes fiers de nos produits de qualit et croyons au bien fond de fournir une assistance fiable nos clients. Vous le dcouvrirez par ce guide facile dutilisation et vous pourrez lentendre en provenance des voix amicales de notre service dassistance la clientle. Tl.: 1-800-26Mais, ce qui est encore mieux, vous pourrez bnficier de ces valeurs chaque utilisation de votre centre de confort. Ceci est important parce que votre nouvelle appareil fera partie de votre famille pour longtemps.
Trouble Shooting Before You Call For Service Problem Possible Cause
No power. A fuse in your home may be blown or the circuit breaker tripped. Power surge.

What to do

Replace fuse or reset circuit breaker.
Unplug the unit, wait a few seconds and then plug it back in. Make sure the 3-prong plug on the DHCC is fully inserted into the outlet Verify the current detected Humidity level as shown in the Ambient Temperature/Humidity display area and adjust your settings accordingly. Verify the current detected Humidity level as shown in the Ambient Temperature/Humidity display area and adjust your settings accordingly. Ensure the front grill is correctly installed on the chassis. Refer to page # for details on how to replace the HEPA filter Replace HEPA filter only the filter that was designed for your DHCC. Refer to page # for instructions on cleaning the air filter

TABLE DES MATIRES LIMITED WARRANTY
This quality product is warranted to be free from manufacturers defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
Informations de scurit importantes
Prcautions Instructions de mise la terre Spcifications de lappareil: 16
First Year Additional 48 Months
During the first twelve (12) months, any electrical parts of this product found to be defective, including any sealed system units, will be repaired or replaced, at warrantors option, at no charge to the ORIGINAL purchaser. During the next forty-eight (48) months any part of the sealed system found to be defective (consisting of compressor, condenser, evaporator, dryer and all related tubing) will be replaced without charge. The purchaser shall pay for all labor and return freight during this period for repair or replacement of any sealed system components. Any unit being diagnosed as non-functional due to sealed system failure and warranting an exchange will be subject to an appropriate depreciation or user fee, including any and all freight charges being levied against the consumer.
Identification des pices Commandes de votre DHCC Les Icnes D'Affichage Minutrie Tlcommande Dshumidificateur Drainage Directe Humidificateur Purification DAir 23

To obtain Service

It will be the consumers responsibility to transport the appliance (at their own expense) to the original retailer (point of purchase) or a
service depot for repair. Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial application, all obligations of Danby under this warranty shall be at an end.
EXCLUSIONS Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.), there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby Products Limited or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A), shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and save harmless Danby Products Limited from any claim for damages to persons or property caused by the unit. GENERAL PROVISIONS No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: 1) Power Failure. 2) Damage in transit or when moving the appliance. 3) Improper power supply such as low voltage, defective house wiring or inadequate fuses. 4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions, (extremely high or low room temperature). 5) Use for commercial or industrial purposes. 6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc. 7) Service calls resulting in customer education. Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.