Multimedia Player Lecteur Multimedia
Quickstart Guide Guide de prise en main
Download User Manual on www.danedigital.com
Packaging Content* Contenu de lemballage
1- So G-Stream 2- Remote Control 3- A/C Adapter 4- Audio/Video cable 5- Antenna 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Tlcommande 3- Bloc dalimentation 4- Cable Audio/Video 5- Antenne 6- Guide dinstallation 7- CD-ROM 1- So G-Stream 2- Mand a distancia 3- Adaptator de alimentaci 4- Cable Audio/Video 5- Antena 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Fembiedienung 3- Ernhrungsadapte 4- Audio/Video Kabel 5- Antenne 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Afstandbediening 3- Voedingsadapter 4- Audio/Video kabel 5- Antenne 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Telecomando 3- Adattatore di alimentazione 4- Cavo Ausio/Video 5- Antenna 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Telecomando 3- Adaptador de alimentao 4- Cabo Audio/Video 5- Antena 6- Quick Start Guide 7- CD-ROM 1- So G-Stream 2- Fjernbetjening 3- Strmforsyning 4- Audio/Video kabel 5- Antenne 6- HDMI kabel 7- CD-ROM
*Photos are given as guidelines and may change without notice.
Front, Back and Side Panel Vue de Face, Arrire et Cot

Power LED

Infra Red Receiver

Power input HDMI output

Composite video and audio output Optical

Wifi USB Host

USB Host Memory Card Reader 3 in 1 SDHC
Remote control Tlcommande
BUTTON POWER MUTE TV SYSTEM FUNCTION Turn on and off in the stand by mode Turn on or shut audio output Press to switch between NTSC (480p), PAL (576p), 480P 576P 720P 50HZ, 720P 60HZ, 1080I , , 50HZ and 1080I 60HZ Press to input digital Press to play the video at the chapter after setting schedule Press to select option bar. To rename or cancel the file Press to fast rewind from current play and again to select the speed Press to fast forward from current play and again to select the speed Return to the previous menu Enter the menu Press shortly to move cursor left Press shortly to move cursor right Press shortly to move cursor up Press shortly to move cursor down ENTER PREW NEXT VOLVOL+ PLAY STOP PAUSE/STEP REPEAT COPY SELECT Press to confirm Press to return to previous file Press to go to next file Press to decrease the volume Press to increase the volume Press to play file. Or play recording file under time shift mode Press to stop play/recording Press to pause play/recording, and again for step playing Press to set repeat option: chapter, Title or off Enter the copy mode No role for the time being
0-9 GOTO OPTION FR FF RETURN SETUP
CONFIRM DISPLAY SUBTITLE SLOW AUDIO ZOOM
No role for the time being Press to display time, title, information of chapter when play video and photo Switch the subtitle if the file supported Press to have slow motion: 3/4,1/2, 1/4, 1/8, 1/16X. Press PLAY to resume regular play mode. Switch audio track. Press to zoom when playing back photos or Video programs. Photo zoom levels:2X,4X,8X,16X Video zoom levels:2X,3X,4X,8X Presses this key, show all files Presses this key, show all audio files Presses this key, show all picture files Presses this key, show all video files

ALL MUSIC PHOTO MOVIES

Change the language Changez la langue
1. Select SETUP on the remote control 2. Select System on the screen 3. Select Menu Language
4. Select the language you want to choose : ex : French 5. "Enter" 6. Select SETUP button on the remote control to save the new setting.

Outupts / Sorties

Audio/Video :

Red White Yellow

AUDIO-R AUDIO-L CVBS
HDMI (cable not included):

Connect the So G-STream

The SO G-Stream detect automatically the video out connected. Change Video Mode : Mode by defaut AV

Audio/Video

Download User Manual on www.danedigital.com Download User Manual on www.danedigital.com
Connect to the Network Connecter au rseau
1. Plug the LAN Cable. 2. Select SETUP on the remote control. 3. Select "NET" on the screen, then "ENTER". 4. The So G-Stream detect automatically the network. 5. Press "ENTER" to continue.

Wired : via RJ45, 10/100 LAN

Wireless : via WIFI (1)

Select DHCP IP (Auto) "ENTER" YES, "ENTER" YES, "ENTER"
"ENTER" Select modify "ENTER" Select "Ap", "ENTER" Select "Auto", "ENTER"

Wireless : via WIFI (2)

Select your Access Point in the list: Ex : Dane-Elec Guest with the remote control Then push "ENTER" "Auto" "ENTER"
Select Wireless Security : Ex : I WPA/WPA2 Key "ENTER" Enter your password then "OK", "ENTER", Save setting, "ENTER" "Testing Screen" Now its OK Push left arrow of the remote control to exit. NB : Dont choose wired or wireless network both in the same time

To see datas from:

USB external HDD or USB Pendrive: Connect your USB external HDD to So G-Stream. Select USB DEVICE on the screen, wait 10 sec. ENTER
Select the file you want to see, when you see the preview, select ENTER to see the movie in full screen. Memory Flash Card:
Plug your Memory Flash Card to So G-Stream. Select CARD READER on the screen, wait 10 sec. ENTER
Select the file you want to see, when you see the preview, select ENTER to see the movie in full screen. Network: Select NETWORK on the screen. ENTER Select WORKGROUP ENTER
Select the machine you want to stream on:
Select the file you want to see, when you see the preview, select ENTER to see the movie in full screen.

Warranty

All rights reserved, Dane-Elec, So G-Stream and logo Dane-Elec and So G-Stream are either registered trademarks or trademarks of Dane-Elec Memory in Europe, USA or other countries. Certain other product names, brand names and company names may be trademarks or designations of their respective owners.
R&TTE Certification esky [Czech] : Dane-Elec tmto prohlauje, e tento So G-Stream je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk [Danish] : Undertegnede Dane-Elec erklrer herved, at flgende udstyr So G-Stream overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch [German] : Hiermit erklrt Dane-Elec dass sich das Gert So G-Stream in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] : Kesolevaga kinnitab Dane-Elec seadme So G-Stream vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English : Hereby, Dane-Elec, declares that this So Smart is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol [Spanish] : Por medio de la presente Dane-Elec declara que el So G-Stream cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. [Greek] : Dane-Elec So G-Stream 1999/5/. Franais [French] : Par la prsente Dane-Elec dclare que lappareil So G-Stream est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] : Con la presente Dane-Elec dichiara che questo So G-Stream conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] : Ar o Dane-Elec deklar, ka So Smart atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi [Lithuanian] : iuo Dane-Elec deklaruoja, kad is So G-Stream atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] : Hierbij verklaart Dane-Elec dat het toestel So G-Stream in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] : Hawnhekk, Dane-Elec, jiddikjara li dan So G-Stream jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] : Alulrott, Dane-Elec nyilatkozom, hogy a So G-Stream megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski [Polish] : Niniejszym Dane-Elec owiadcza, e So G-Stream jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus [Portuguese] : Dane-Elec declara que este So G-Stream est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko [Slovenian] : Dane-Elec izjavlja, da je ta So G-Stream v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky [Slovak] : Dane-Elec tmto vyhlasuje, e So G-Stream spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Svenska [Swedish] : Hrmed intygar Dane-Elec att denna So G-Stream str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. slenska [Icelandic] : Hr me lsir Dane-Elec yfir v a So G-Stream er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. Norsk [Norwegian] : Dane-Elec erklrer herved at utstyret So G-Stream er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. [Isral] : 1999/5/ CE So G-Stream -

GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright 1989, 1991, 1997 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation>s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author>s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors> reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone>s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program>s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program,

the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients> exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs. If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. <one line to give the program>s name and a brief idea of what it does.> Copyright (C) 19yy <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w>. This is free software, and you are welcome to redistribute it under certain conditions; type `show c> for details. The hypothetical commands `show w> and `show c> should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w> and `show c>; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision> (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice. This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. ---------------------------------------------------------------------------------------------------------------------------------------------NB : Portions of this code contains Linux 2.6.12 kernel, MTD,Samba,WPA,uClibC,gdb,nand_yaffs,dosfstools,dosfsck, Scripts to compile and many others. ---------------------------------------------------------------------------------------------------------------------------------NB : Source code is freely available upon written request to: Dane Elec Memory Legal Department 159 avenue Gallieni 93171 Bagnolet France A fee of 10 will be requested for CDROM duplication and delivery fees only.

Multimedia Reader for External Hard Disk HDMI & WIFI 802.11g

User Manual

CATALOGUE BRIEF INTRODUCTION PRODUCT DETAILS BASIC OPERATION OPERATION OF FILE SHARING UNDER WINDOWS XP OPERATION OF FILE SHARING UNDER WINDOWS VISTA OPERATION OF PRODUCT USAGE SETUP MENU MAINTENANCE NOTICE 20 22
BRIEF INTRODUCTION Feature The So G-Stream is a new kind of multimedia player product. The So G-Stream can provide good watching. Meanwhile, it can also play many kinds of video files. The So G-Stream, which facilitated with many port and HDMI, can show you picture and video with high definition. It is really your desirable entertainment products. Specification USB host USB port Network connection video output Audio output Audio Video Subtitle Picture Picture play mode Power adapter Dimension Weight Support multiple USB storage USB 2.0 high speed port RJ45 10/100M connect Composite video /component video/HDMI Stereo/digital HDMI/Optical Format: MP3, WMA, WAV, AAC, OGG (no DRM), AC3, MP4 Speed: MP3 32kbps / 320kbps WMA 32kbps / 192kbps Video decode : MPEG 1/2/4, DivX, Xvid Format : VOB, DAT, AVI, MPG, MPEG-2 TS, IFO, HD DivX, MKV SSA, SMI, SRT, SUB, SMI, SAMI Multi-Languages, IDX JPG/BMP, JPEG (720p/1080i) Slide show AC input : 100V~220V, 50/60HZ DC output : 5V, 2A 19019027mm About 628.g
Note : Up to the improvement, the appearance and specification will be changed accordingly without notice.
PRODUCT DETAILS Packing list Check the accessories after receive the So G-Stream. If there are some missing, please contact immediately with your supplier to insure your consumers right. No. Name Media player Power Adapter Remote Controller AV cable User Manual Batteries Antenna CD ROM So Util Quantity 1 pcs 1 pcs 1 pcs 1pcs 1 pcs 2 pcs 1 pcs 1 pcs
Note: Up to the model and specification of the products, some of the below accessories may not appeared in your packing, please take note. Or can consult your supplier. Front view
Button definition: 1 Definition IR Instruction Remote control receiver

Left view

2 Definition USB HOST 3 in 1 card port
2 Instruction Outside USB port Can read data from SD, MMC, MS

Back view

9 Remote control BUTTON POWER MUTE TV SYSTEM 0-9 GOTO OPTION FR FF RETURN SETUP
Port DC IN HDMI AV Optical LAN USB HOST WIFI
Port definition Power port High definition port Composite video and audio output port Audio output port Network port Outside USB port Antenna port
FUNCTION Turn on and off in the stand by mode Turn on or shut audio output Press to switch between NTSC(480p), PAL (576p), 480P, 576P, 720P 50HZ, 720P 60HZ, 1080I 50HZ and 1080I 60HZ Press to input digital Press to play the video at the chapter after setting schedule Press to select option bar. To rename or cancel the file Press to fast rewind from current play and again to select the speed Press to fast forward from current play and again to select the speed Return to the previous menu Enter the menu Press shortly to move cursor left Press shortly to move cursor right Press shortly to move cursor up Press shortly to move cursor down Press to confirm Press to return to previous file Press to go to next file Press to decrease the volume

ENTER PREW NEXT VOL-

VOL+ PLAY STOP PAUSE/STEP REPEAT COPY SELECT CONFIRM DISPLAY SUBTITLE SLOW AUDIO ZOOM
Press to increase the volume Press to play file. Or play recording file under time shift mode Press to stop play/recording Press to pause play/recording, and again for step playing Press to set repeat option: chapter, Title or off Enter the copy mode No role for the time being No role for the time being Press to display time, title, information of chapter when play video and photo Switch the subtitle if the file supported Press to have slow motion: 3/4, 1/2, 1/4, 1/8, 1/16X Press PLAY to resume regular play mode. Switch audio track Press to zoom when playing back photos or Video programs Photo zoom levels:2X,4X,8X,16X Video zoom levels:2X,3X,4X,8X Presses this key, show all files Presses this key, show all audio files Presses this key, show all picture files Presses this key, show all video files
ALL MUSIC PHOTO MOVIES BASIC OPERATION
1) Power connection Take out power adapter from the package and connect it. 2) Connection of TV audio output The So G-Stream is designed with multi-output, including composite (AV), component (YPbPr) and HDMI. Individuals can select different interface according various need. The So G-Stream can detect video output automatically, making the operation friendly and convenient. Please refer to the following instruction for connection to avoid any problem.
Composite output connection

Red White Yellow

AUDIO-R AUDIO-L CVBS
Composite output mode: Plug the yellow connector into the AV output of So G-Stream and AV input of TV, and plug the red and white connector into the audio input of TV or HIFI. Turn on the TV and select AV mode. Turn on the So G-Stream and TV displays the interface of initiation. NB: By default the So G-Stream is parameter in PAL 576p (standard definition). To have a image in High Definition you have to use the HDMI cable and follow the instructions below. Optical output connection (optical cable not included):

Optical output: connect the So G-Stream Optical connector with the other one from video or audio device by Optical cable. Then enter the So G-Streams audio interface, select the Digital Output option SPDIF LPCM or SPDIF RAW. It is available to enjoy 5.1 high quality sounds through a multi channel decoder/ amplifier with optical input. HDMI output connection HDMI output connection HDMI output connection (HDMI cable not included):
HDMI output mode: HDMI is an output with best audio and video effect which outputs digital video and audio composited at the same time. Connect HDMI cable to output of So G-Stream and display device with HDMI input. Select HDMI mode in TV until it displays the interface of initiation. Step 1: TV configuration: - Turn on you TV - On your TV setup select HDMI input (for that read you TV User Manual) - Validate Step 2: So G-Stream configuration: - Turn on the So G-Stream - Select setup button on the remote control - On the screen select Video with the arrow button ( , ) - Use arrow down button ( ) to select TV System option - Select ENTER on the remote control - Use arrow down to select the resolution you want PAL : 720p 50 Hz or PAL : 1080i 50 Hz - Select ENTER button then Setup to activate the modification NB: 1) To turn on the So G-Stream: - Select power button on the remote control ( ) - The power led turn from red to orange (or red to blue depending of the version) - The front power led turn on orange or in blue (depending on version) Red or blue = Standby Red or Orange = In function 2) To turn off the So G-Stream: ) - Click on power button ( - Wait 15 seconds - The So G-Stream is in stand by when the power led go from orange (or blue) to red and front power led go from orange (or blue) to black.
3) Connection and setup of network The So G-Stream can play the files stored in the PC directly through network. Please connect the RJ45 cable according to the following illustration. The network connects well when the LED of network status and W/R blinks.
Connect one end of the RJ45 cable to the So G-Stream like the PC does and connect the video output. Press setup key or select setup menu in the initiation interface. Select Network option in the setup window and press ENTER to confirm. It is available for both automatic and manual IP setup. Press setup key again to exist after setup. Before access the PC through network by the So G-Stream, the media files must be shared in the network. OPERATION OF FILE SHARING UNDER WINDOWS XP Two conditions are necessary for a successful play of network connection: 1. Folder sharing and safety setup. 2. Set the same gateway and subnet mark address. Procedure of file sharing under Windows XP: 1. Select the folder need to be shared, right click mouse and select the option Sharing and safety, lift click the mouse.
2. Select sharing in the property option and select share this folder on the network and click Apply for confirming to exist.

3. Open Control panel- Management tool-Computer management-Local users and groups and click Users option. Right click Guest and select Properties.
4. Select users can not change your password and password never expires. Keep the other checkboxes unchecked.
5. Open Control panel- Network connection, and select Local Area connection and right click to select Properties.
6. In the Pop-up window, select Internet protocol (TCP/IP)
7. Set up the relevant IP address, subnet mask and gateway can also choose to automatically design. 8. Completion of Windows XP network sharing. 9. Finally, please close the Windows Network Connection Firewall. Operation of file sharing under Windows Vista 1. Please make sure that the Vista operating system is installed as Administrator supper user. 2. From the desktop select start- setup-control panel-select user account. 3. Open User account and select open a new account and name it Guest. 4. Select the folder need to share and right click the mouse, then select the sharing option. 5. Open the shared folder and add guest account to the list. 6. Give the right to all the users after adding the Guest into the list. 7. Select sharing, and then the folder is shared. 8. Finish sharing. 9. Operate the device as the same as operate in XP system. Playback function With this player, individual can browse movie, photo and music files stored in HDD, USB and net work. Please select the media and press ENTER button to enter. It is available to preview the selected media and press ENTER button to play.
How to share a folder under Windows Vista SP1 ? Step 1 : - Click on Start - Select computer - Right click on mouse - Select Manage services
- In manage services double click on Server
- In start type select with scroll down arrow Automatic selection - Click on apply - Then click on start button
After this manipulation, Server service start and take in consideration the folder files sharing.
Step 2 : To share a folder - Click right mouse button on Start - Select Explorer with left mousse button
- Select the folder you want to share - Click on the right mouse button a windows appear - Select with the left mouse button share
- Click on scroll down arrow - Select everybody in the list - Click on add - Then click on share

- Click on finish

You can access now to all the folder and files you have select before and used them by streaming for you computer to your So G Stream connected to you TV LCD Screen (cf. Quick Start Guide).
Operation of product usage Browse and play the media files. Power on the HDD Player, the system shows guide menu after a few seconds. There will be four function options. Note: While connect the power supply for the first time, the device will power on automatically and appear the menu: With these function, individuals can browse movie, photo and music files stored in USB DEVICE, CARD READER and NETWORK by pressing the navigation buttons to choose the source devices and and press ENTER button to confirm. File Range function To make file browsing and playing easier, there is a function to range all files into different folders named and All, Music, Photo and Movie, individuals can switch to any folder by pressing the navigation button. File Edit menu Select the file or folder by pressing the navigation buttons and press OPTION button on the remote control, individual can rename and delete files, press ENTER button to confirm. Return Rename Select to return the first menu Please refer to following procedure to rename file 1.select Rename. 2.The edit window appears after press ENTER key. 3. Use the navigation arrows to select letters and numbers. CAPS to toggle between uppercase and lowercase letters. Press <- to delete, -> to insert a space, ENTER to confirm. 4. Once you finish the new name input, select ENTER to confirm. If you want to cancel the naming during the process, press ENTER to return. Please refer to follow procedure to delete title to select the Delete tab. and 1. Press 2. Press ENTER to confirm and delete the file. 3. Confirmation message will appear. Press and select ENTER. or 4. Press ENTER to confirm the delete. Select return to cancel delete.

Delete

NB: If you want to create a slide show with music: - Select ALL red button on the remote control to have access to all data. If you want only music select music, photo select photo, video select video, the icone change on the top left screen corner each time you use a button. - Select the source from where you want to read the photos and music - Select the first photo - Enter - Please dont forget to put in the same folder photos and music in MP3 format.

Network

My shortcut Select a PC in the menu or add one available IP address, individuals can access the media files in network through My_Shortcuts. File Copy The File Copy allows individuals to copy files between HDD, USB, NET. Select COPY on the remote control. It is very easy to copy files between various devices. Press COPY button on the remote control, then individuals can copy files from LOCAL HDD, USB DEVICE, NETWORK from a media to another. NB: HDD and Flash Memory Card must be formatted in FAT 32 if you need to write on these devices. Copying operation Step 1: Select Source Device Press to select the device which need to copy at first after entering the File copy interface. and to select Destination Device, press to return. Then press Step 2: Select Destination Device to select the device of the Destination after go to Destination sector. Then press and Press to return. next step, and press
Step 3: Select copy files or folders At Source sector, press to select and press PLAY to select file or folders which need to copy. and to next step, and press to return.appears at right side of selected file or folder. Then press Step 4: Select the folders of Destination to select a target folder at the destination sector. Then press and Press to return.

to next step, and press

Step 5: Copy Status At top menu, select ENTER to copy, select No to cancel. After copy finishing, the system will display File Copy is completed!, or will display File Copy failed!.Select ENTER to browse the copied files, or select No to return to Video.
Setup Menu Directly press Setup button on the remote controller to enter the setup menu. It is possible to configure Photo, Audio, Video, Network and System. Select any option by pressing on the remote controller, and press ENTER to confirm or press and RETURN to exit. Press SETUP button again on remote control to exit from setup menu. Changing Photos Settings Slide Show Transition Effect Background Music Changing Audio Settings There are On off and Comfort modes. In comfort mode, it restrict the volume automatically so that it would not affect the people rest or working. There are HDMI LPCM,HDMI RAW,SPDIF LPCM and SPDIF RAW Set time interval of slide show. There are many types of playback options the music must be in the same folder, choose background music position by the navigation

Night Mode Digital output Changing Video Settings

Screen Ratio

Brightness Contrast TV System Changing HDMI settings
Pan Scan 4:3, Display a wide picture on the entire screen and cuts off the redundant portions when a standard 4:3 TV is connected. Letter Box 4:3, Display a wide picture with two black borders on top and bottom of 4:3 screen when a standard 4:3 TV is connected. 16:9: Compress the image to convert the whole image when a 16:9 TV is connected. Select to set brightness levels. Select to set contrast levels. Select to adjust TV system. As NTSC, PAL, 480P, 576P, 720P 50HZ, 720P 60HZ, 1080I 50HZ, 1080I 60HZ.
Connect the HDMI cable before usage, adjust TV mode to HDMI, then video appears on TV screen. Please refer to changing audio settings and changing video settings if you want to change HDMI settings.
Changing Network Settings Check the following items before use this function: Connection between product and network Network protocol is available PC firewall must be shut down Wired Lan Setup and Wireless Files are shared Lan Setup Auto: Automatically set IP address Manual : select IP address, subnet mark address and default gateway. It is available through navigation and numeric key and press enter for confirming Wired Lan Setup Wired : via RJ45, 10/100 LAN: Select DHCP IP (Auto) ENTER YES, ENTER YES, ENTER

Wireless Setup

Wireless : via WIFI
ENTER Select modify ENTER Select Ap, ENTER Select Auto, ENTER
Select your Access Point in the list: Ex : Dane-Elec Guest with the remote control Then push ENTER Auto ENTER
Select Wireless Security : Ex : I WPA/WPA2 Key ENTER Enter your password then OK, ENTER, Save setting, ENTER Testing Screen Now its OK Push left arrow of the remote control to exit.
NB : Dont choose wired or wireless network both in the same time Changing System Settings Menu Language Text Encoding Restore Default Maintenance notice: To protect the normal use of all accessories, please kindly make sure understand and pay attention to following points. Rating power input voltage 100V~220 ; output 5V. Please notice the voltage of the connection terminal Under normal working status, power adapter will keep warming, but body temperature of 60 degree or under is normal. Please be sure of aeration under normal working status, do not put the device in bed, sofa, or similar area where cooling effect is no good. Please do not teardown personally, but send it back to the pointed service agent, or there will be danger of electronic shock. Please pull out the cable and shut the device immediately when cable is cut or liquid in, and send to pointed agent for repair. FAQ: Q: Can it be turned off when connect to PC? A: No, it cant. Q: Can it copy between the USB peripheral device through USB? A: No, it cant. Others The accessories of products may be different for this series products are various according different series and models. Please refer to packing list or contact your agent for information. Please understand no advance notice for further product improvement, outloENTER design and specification update. The illustration may be a little different from the real product. Select to choose the OSD (On Screen Display) language. Change the system language. To reset the language and network.