WARRANTY

Datalogic warranties this product against defects in workmanship and materials, for a period of 5 years from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering.

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: PRODUCTS Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: - VisualSetup a Windows-based utility program allowing device configuration using a PC. It provides RS232 interface configuration as well as configuration barcode printing. SERVICES & SUPPORT - Datalogic Services - Warranty Extensions and Maintenance Agreements - Authorised Repair Centres CONTACT US E-mail form and listing of Datalogic Subsidiaries

INTRODUCTION

GRYPHON D432/D432E DESCRIPTION
The Gryphon D432/D432E reader is an omni-directional barcode scanner having the following characteristics: Plug and Play The Gryphon D432/D432E is very ergonomic and userfriendly for intuitive operation and is equipped with plug-andplay enhanced Multistandard Architecture. It can be connected to a Host PC through a USB, RS232 or Wedge emulation cable. To read a symbol or capture an image, you simply aim the reader and pull the trigger. Since Gryphon D432/D432E is a powerful omni-directional reader, the orientation of the symbol is not important. Thanks to powerful algorithms, Gryphon D432/D432E reliably decodes all major 1D (linear) barcodes, 2D stacked codes (such as PDF417), 2D matrix symbols (such as DataMatrix), postal codes (such as POSTNET, PLANET). The data stream acquired from decoding a symbol is rapidly sent to the host. The reader is immediately available to read another symbol. The string of a decoded code may be processed according to either a simple or advanced data formatting and be concatenated to other codes (up to 4 different codes). Gryphon D432/D432E can also function as a camera by capturing entire images or image portions of labels, signatures, and other items. Two different control modes are available for managing the camera exposure and calibration. An autoscan command causes the reader to scan continuously and to monitor the central zone of its reading area. Flash technology allows to upgrade the Gryphon D432/D432E reader as new symbologies are supported or as improved decoding algorithms become available.

AOAPFLHMHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKEBFHIK AKCBPJCJGIIJCMCFHLOAKOPLLK AEFBJLBGMHPLNOGLHKFNAIFGGK AAPHBAJJCGAIDDFGBAAPENIBDK AHKFAIOJGDGOEIJPHNGOGKIILK DDLLLDLDLDLLLLLDLLDDDLDLLL

KEYBOARD NATIONALITY

This parameter default value is restored through the Interface Selection code and not Restore Default. Belgian
AOAPCOGMHNGNENEIEPANHOGOCK AHHPMJIMDKEOFMHMLJAKFFAHIK AKCBPJCJGIIJCMCEHIJFLFPNPK AEFBJLBGMHPLMLHCHGLKEBCFGK AAPHBAJJDECOEEAFHDAPIFOFDK AHLFAKJGEAHOKMOLCCDMAIBLKK DDLLLDLDLDLLLLLDDDLDDLDLLL

English

AOAPCOHMHNGNENEIEPANHOGOCK AHHPEJAMDKEOFMHMLJAKFHDHIK AKCBPJCJGIIJCMCFHOLALHANNK AEFBJLBGMHPKNMBNBAOPGAAHGK AAPHBAJJDEENOKPFEHEHOGPPDK AFKFAIKNBNHCIHKEKNKACHIKLK DLLLLDLDDDDLLLLDLLLDDLDLLL

French

AOAPCOHMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKEGEEIK AKCBPJCJGIIJCMCEHNLKFOILPK AEFBJLBGMHPKNIFAFLCFLINEGK AAPHBAJICADLHAGDGAMCHONBHK AFLFAKLAHMBAEDPAOIGIGABILK DLDLLDLDDDDLLLLDDLDDDLDLDL

German

AOAPCOHMHNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJALECDFIK AKCBPJCJGIIJCMCEGIPLDFPPJK AEFBJLBGMHPLMMGJMCHHCMJFGK AAPHBAJICAAFOPBHBIFGAPABHK AGKFALMOEEECOKOMHKMAGCHKKK DLLLLDLDDDDLLLLDDLLDDLDLLL

Italian

AOAPCOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFDEGIK AKCBPJCJGIIJCMCFGLPBNMHJLK AEFBJLBGMHPLMICEIJLNPEEGGK AAPHBAJJDEHDHFIBDPNDJHCPDK AGLFAJNDCFCACOLIDPAICFOIKK DLDLLDLDDDDLLLLDLLDDDLDLDL

Japanese

AOAPCOGMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALEAAFIK AKCBPJCJGIIJCMCFGONODHAPLK AEFBJLBGMHPKNLAGKECCANLHGK AAPHBAJICAGGEBOHCMBOGMBLHK AELFAJPFBJEOMBKDPFFMENOLLK DDLLLDLDLDLLLLLDLDLDDLDLLL

Spanish

AOAPCOHMHNGNENEIEPANHOGOCK AHHPEBAMDKEOFMHMLJALEEBGIK AKCBPJCJGIIJCMCEHJMHJKEBPK AEFBJLBGMHPLMLBNDHALIKCEGK AAPHBAJIDDECLGLIPFBKGHGDBK AHKFAONHICHEEAKJNPLMOLALIK DLLLLDLDDDDLLLLDLLLDDLDLLL

Swedish

AOAPCOHMHNGNENEIEPANHOGOCK AHHPEBIMDKEOFMHMLJAKFBBEIK AKCBPJCJGIIJCMCFGPIMBILDLK AEFBJLBGMHPKNLGJOFJDMGLGGK AAPHBAJJCHAKLDFKKKALIOJNFK AEKFANLENLEECNOBAINMKOPLJK DLLLLDLDDDDLLLLDDLLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFFGFIK AKCBPJCJGIIJCMCFHKMNHDMHNK AEFBJLBGMHPLMPFAHMMBFCPHGK AAPHBAJJCHDECMCONCJPPPENFK AHLFAMMKODBGIEPNJKHEKMJJIK DLDLLDLDDDDLLLLDDLDDDLDLDL

KEYBOARD SPEED

This parameter default value is restored through the Interface Selection code and not Restore Default. Normal
AOAPBPGMFNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJALEBGHIK AKCBPJCJGIIJCMCEGJIEPKNDJK AEFBJLBGMHPLNNDGIDBCOOAEGK AAPHBAJJDEHOFMOFDGMGKIAJFK AFLFAJNANAPEGCNKPFNGOKFKLK DDDLLDLDLDDLLLLDLDLDDLDLLL

AOCOCOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFBAFIK AKCBPJCJGIIJCMCFGPONKMOFPK AEFBJLBGMHPKNPDOMLPMCNGFGK AAPHBAJJDHDLODLCEMFNHJEFDK AGKFAONMBEOIGALLJIBMMPIJKK DDLLLLLDLDLLLLLDDDDDDLDLLL
AOCOCOGMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALECEGIK AKCBPJCJGIIJCMCFGKMCEHJDPK AEFBJLBGMHPLMMBMOGGDNEJEGK AAPHBAJICDCONHNEFPJAICHBHK AEKFAOPKCIIGIPKAFCEIKHIKLK DLDLLLLDDDDLLLLDDLLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK AHHPEBAMDKEOFMHMLJALEGFFIK AKCBPJCJGIIJCMCEHNNLOKNNLK AEFBJLBGMHPKNMAHHFEKFDAHGK AAPHBAJIDAAKCAILIGJEIJAJBK AHLFAJNILDLMAOKKHIKIABGKIK DDDLLLLDLDLLLLLDDDLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK AHHPEBIMDKEOFMHMLJAKFDFHIK AKCBPJCJGIIJCMCFGLJAGICPPK AEFBJLBGMHPLMMHDKHNCBPJFGK AAPHBAJJCEECCFGJNJIFGAPHFK AELFAKLLOKIMGDOCKPMIEEJKJK DDDLLLLDLDLLLLLDLDLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFHCGIK AKCBPJCJGIIJCMCFHONBADFLJK AEFBJLBGMHPKNIEKDOIAILNEGK AAPHBAJJCEHMLKBNKBBBBBCHFK AHKFALMFNCNOMKPODNGAEGPIIK DDLLLLLDLDLLLLLDLDDDDLDLLL

KEYBOARD SETTING

The values set by this procedure are not effected by the Restore Default code but will be lost if the Interface Selection code is read.

Set Alphanumeric Keys

AOCOBLHMHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKEFHEIK AKCBPJCJGIIJCMCFHKIFCIDNNK AEFBJLBGMHPKNOEFDMIDAIKGGK AAPHBAJJDBGBFEFKLAHODLCLBK AELFAONNHNGEOMLLCMDAAFDLLK DDLLLLLDLLLLLLLDDDLDDLDLLL
The reader can be used with terminals or PCs with various keyboard types and nationalities through a simple keyboard setting procedure. Keyboard setting consists of communicating to the reader how to send data corresponding to the keyboard used in the application. The keys must be set in a specific order. Press and release a key to set it. Some characters may require more than one key pressed simultaneously during normal use (refer to the manual of your PC or terminal for keyboard use). The exact sequence must be indicated to the reader in this case pressing and releasing the different keys. Example: If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the character "$" to the video, to set the "$", press and release "Shift" then press and release "4". Each pressed and released key must generate an acoustic signal on the reader, otherwise repress the key. Never press more than one key at the same time, even if this corresponds to the normal use of your keyboard. Press "Backspace" to correct a wrong key entry. In this case the reader emits a wrong beep. Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for each character and cannot be substituted by "CAPS LOCK". 1. 2. Read the "Set Alphanumeric Keys" code. Press the keys shown in the following table according to their numerical order:

The extended Header/Terminator keys for Wedge Interface users can be customized by defining them through a simple keyboard setting procedure. For example, the Numeric Keypad keys can be set for use as Headers or Terminators by substituting the default extended keys during this procedure. Press and release a key to set it. Some characters may require more than one key pressed simultaneously during normal use (refer to the manual of your PC or terminal for keyboard use). The exact sequence must be indicated to the reader in this case pressing and releasing the different keys. Example: If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the character "$" to the video, to set the "$", press and release "Shift" then press and release "4". Each pressed and released key must generate an acoustic signal on the reader, otherwise repress the key. Never press more than one key at the same time, even if this corresponds to the normal use of your keyboard. Press "Backspace" to correct a wrong key entry. In this case the reader emits a wrong beep. Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for each character and cannot be substituted by "CAPS LOCK". 1. 2. 3. Read the "Set Extended Keys" code. Press the first 4 keys indicated in the following table. Define all keys from 5 to 28 in the following table.
WEDGE If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your keyboard, you can only substitute them with keys not used, or substitute them with each other. The reader signals the end of the procedure with 3 beeps indicating the keys have been registered.
CUSTOM EXTENDED KEYBOARD SETTING TABLE Custom Order HEX 89 8A 8B 8C 8D 8E 8F 9A KEY Shift Alt Ctrl Backspace

DATA FORMAT

The Data Format parameters can be restored to their default values using the following methods: 1) the general Restore Default code restores all the configuration parameter groups including Data Format to their default values, with the exception of the Symbology Independent Header and Terminator selections; 2) the Data Format Default code restores all the Data Format configuration parameters to their default values, with the exception of the Symbology Independent Header and Terminator selections; 3) the Symbology Independent Header and Terminator parameters are set to their default values when reading the interface selection code; 4) the Symbology Specific Format Default code restores only the configuration parameters of the specific symbology indicated by the Code Identifier code in Appendix C.

DATA FORMAT DEFAULT

Data Format Default
AOCPBLDKFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKEGAFIK AKCBPJCJGIIJCMCEHJKCFFCHPK AEFBJLBGMHPKMNAJGLEGHEGGGK AAPHBAJJCHEKKKMBGNHELADBDK AEKFAPJMLGFOAIOEJLKOMMCJLK DDDLDDLLLLLLLLLDDDLDDLDLDL

SET TERMINATORS

Set Terminators
AOCLBPHMHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKFAHGIK AKCBPJCJGIIJCMCEGKMBDAFBPK AEFBJLBGMHPLNOFGDKLPFPNFGK AAPHBAJICHAICAAEDMENDAINBK AFKFAMKDELFIIOFHBCGIKDELJK DDLLLLLDLLLLLLLDLLDDDLDLLL

TERMINATORS

AOCLCOHMFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKFFEGIK AKCBPJCJGIIJCMCEHKLELKAHNK AEFBJLBGMHPLNKBGLDCKOBJEGK AAPHBAJJCHCPAIDNLMACJGJNDK AGKFANLKPPMAGGDPBJKIIGKLJK DLDLLLLDLLDLLLLDDDDDDLDLDL
AOCLCOHMFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKFDGFIK AKCBPJCJGIIJCMCEGLIIBFLJLK AEFBJLBGMHPLNNGCEGFGEHCFGK AAPHBAJJDEGIFBJCFBEOPOPPFK AHKFAIKDDJPGMMHKLMNEAPNKLK DLDLLLLDLLDLLLLDLDDDDLDLDL
Symbology Dependent Parameters
The Symbology Specific Format Default code on page 46 allows restoring the symbology dependent parameters related to a specific code family to the default values.
SYMBOLOGY SPECIFIC FORMAT
Symbology Specific Format
AOCLCIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKEGHGIK AKCBPJCJGIIJCMCFHLNMJCGPLK AEFBJLBGMHPLMMGPEPDOAPMGGK AAPHBAJJDCFMDNCMBONAPKCNHK AGKFALICLLGKIBEJGFOCKENJLK DLLLLLDLLLDLLLLDDLDDDLDLLL
Select a Datalogic Standard Code Identifier from the Code Identifier Table in Appendix C. Formatting: 0 = select all - Stop 1 = select right - followed by Step = select left - followed by Step = select middle - followed by a number in the range 000-999 for the starting character and then, by Step = discard right - followed by Step = discard left - followed by Step = discard middle - followed by a number in the range 000-999 for the starting character and then, by Step 3 Set the number of characters to select/discard in the range 000-999.

SYMBOLOGY HEADERS

Symbology Headers
AOCPFPHMHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALFEGEIK AKCBPJCJGIIJCMCEGJLCJPHBPK AEFBJLBGMHPKNNDHOGJCJDBFGK AAPHBAJICDAIOGPCAEKBELJJBK AFLFANMIJICKAJMIONHKIJOLLK DDLLLDLDDDDLLLLDDLLDDLDLLL
Select a Datalogic Standard Code Identifier from the Code Identifier Table in Appendix C. Set the number of characters in the range 0-5. Read the corresponding characters as Hex values from the Hex/Numeric table. Valid values are in the range: 00-7F for RS232, USB BULK, USB COM, USB Generic HID 00-9B for Wedge and USB Keyboard Read the following code to enable the configuration you have set.

Headers

AOCPFPHMFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALEBGEIK AKCBPJCJGIIJCMCFHKPEEAKDLK AEFBJLBGMHPKNPAPMMGMNIIHGK AAPHBAJIDDEICPPPODIOCPCPHK AELFANOCPAJCGLHLEJKOEMJJLK DLLLLDLDLLDLLLLDLLDDDLDLLL

Enable Medium

APCKFLGMHNGNENEIEPANHOGOCK AHHPMJIMDKEOFMHMLJALEFEGIK AKCBPJCJGIIJCMCEGINBCKIJLK AEFBJLBGMHPLNJAPGMAJKHBFGK AAPHBAJIDBHNKGELMAIFHFDFBK AELFAPMHJPMCMMEILGIGILILIK DLLLLDLDLLLLLLLDLLLDDLDLLL

Enable Long

APCKFLGMHNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJAKEHBEIK AKCBPJCJGIIJCMCEGMKMOOEDLK AEFBJLBGMHPKMKECAACHJFOFGK AAPHBAJICCAEGAJAFFFNGMIHHK AGKFALKAGBKGMPBBIBFCAAJILK DLDLLDLDLLLLLLLDDLDDDLDLDL

GOOD READ SPOT

APCOCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFHFHIK AKCBPJCJGIIJCMCFGKKAEDJHLK AEFBJLBGMHPLMNBODJGILAEEGK AAPHBAJICBEKCEPPLMKNKJGFFK AHKFAILCIGOKGPMMHEJCKLILIK DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFBHEIK AKCBPJCJGIIJCMCFHLJMOMCJNK AEFBJLBGMHPLMKGKMMBEBGPFGK AAPHBAJIDCANHNFAFBOBMBAHDK AGKFANKLEANMMFIJNBOOCCPKKK DLDLLDLDLDDLLLLDLDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKEEHGIK AKCBPJCJGIIJCMCEGNNHGONLJK AEFBJLBGMHPKNKBOBOIMFKGHGK AAPHBAJJCGEFHILCAOPACIPJHK AFKFAOMIBJOMKIMBAGIOGHAKLK DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJALEAAHIK AKCBPJCJGIIJCMCEHIJGAFKPPK AEFBJLBGMHPLMOCHIHNOMOCGGK AAPHBAJJCGHLOHMGHGGEFJCJHK AGLFAPLGCBLOABNNJECGGFGIKK DLLLLDLDLDDLLLLDDDLDDLDLLL

User Defined Beeper

USER DEFINED BEEPER TONE
APDNCKFOFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKFFGGIK AKCBPJCJGIIJCMCFHJNMMMPPLK AEFBJLBGMHPLMNAINJLLMGBGGK AAPHBAJJDAEBELGEKFDGBNGFDK AELFALOOKJCEGIBDMEMEOCPJJK DDDLLLLDLDDLLLLDDDLDDLDLLL
APDNCKFOFNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJALEAGEIK AKCBPJCJGIIJCMCEGPJHEOANPK AEFBJLBGMHPKNNHMALCDIKIEGK AAPHBAJICEAJEOIGPKCHPEJLHK AHLFAIINPABEAFFLBDKEKHAJIK DDDLLLLDLDDLLLLDLDLDDLDLLL
APDNCKFOFNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJAKEEBFIK AKCBPJCJGIIJCMCEHKNGCFHJJK AEFBJLBGMHPLMJEFJCHBBOMFGK AAPHBAJICEDHNBPCICLDIFELHK AEKFAJPDMIEGKMEHIBAMKFGLJK DDLLLLLDLDDLLLLDLDDDDLDLDL
APDNCKFOFNGNENEIEPANHOGOCK AHHPEJAMDKEOFMHMLJALFBBHIK AKCBPJCJGIIJCMCFGMJNKHILNK AEFBJLBGMHPKNJDBEAOJFCFHGK AAPHBAJJDAHPNEBANNKCGMLFDK AHKFAKJAJBHGMBAPFGGMOAJLIK DDLLLLLDLDDLLLLDDDDDDLDLDL
USER DEFINED BEEPER VOLUME
APDNCKFMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALEFEEIK AKCBPJCJGIIJCMCFGPMIEHNPPK AEFBJLBGMHPLMLAILLLFJCFHGK AAPHBAJICHEKELAACOKAEILHBK AELFAMPJJGEMILJBJIEAEKFLKK DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALEDGHIK AKCBPJCJGIIJCMCFHOPEOIGBJK AEFBJLBGMHPLMMHMEOMJDEOGGK AAPHBAJIDEANBCKPMDOMCANFHK AFLFAJOAFAHKCBNEDNDMMDCKIK DLDLLLLDDLLLLLLDDLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKFGGFIK AKCBPJCJGIIJCMCEGILPGKJDNK AEFBJLBGMHPKNMAIJMFBHIHEGK AAPHBAJJCAEFBHENJMPNMJCLDK AGLFAKIDAJEKEMJMOKFMIGNKJK DLDLLLLDDLLLLLLDLLLDDLDLDL

APDNCKFMHNGNENEIEPANHOGOCK AHHPEJIMDKEOFMHMLJALFCBEIK AKCBPJCJGIIJCMCEHNPOABOHLK AEFBJLBGMHPLMIDBAFADOMDFGK AAPHBAJJCAHLIIDJOEGJLIPLDK AFKFALPNDBBIOFIAHIPEIELIIK DLLLLLLDDLLLLLLDLLDDDLDLLL
USER DEFINED BEEPER DURATION

Set Duration

APDNBLFMFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALEAHEIK AKCBPJCJGIIJCMCFHPLNMNIJNK AEFBJLBGMHPLMPEIDCCACMBGGK AAPHBAJJCHGNGDDJKOOPOOKHDK AHLFANOACCNEGDPJJDIAGPLLKK DDLLLLLDDLDLLLLDDDLDDLDLLL
Read a number in the range 01-99, which corresponds to a max 990 ms duration.

TEST USER DEFINED BEEPER

Test User Defined Beeper
AMHOHNGODNGNENEIEPANHOGOCK AHPHKJIMDKEOFMHMLJAKFEFGJK AKCBPJCJGIIJCMCEGLLMFFCNLK AEFBJLBGMHPLMKFGLMPMEBIEGK AAPHBAJIDFHCJCKKJOFFLOMLDK AHKFAOLIHAMCMHFJDPCCOPEKKK DDDLLLLDLLLLLLLDDLDDDLDLDL
See par. 9.1.2 for details.
Code Ordering and Selection

CODES PER SCAN

One Code per Scan
APCKGOHMFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKEGEFIK AKCBPJCJGIIJCMCEHKJFDDGFPK AEFBJLBGMHPKMMEHMPLLDHBGGK AAPHBAJIDFAKCLAEGDGOLGMHDK AGLFAJPDDNCAIKOACPFEEEFJKK DDDLLLLDLDLLLLLDDDDDDLDLDL

All Codes per Scan

APCKGOHMFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKEAGGIK AKCBPJCJGIIJCMCEGLKJJMNLJK AEFBJLBGMHPKMLDDDKMHJBKHGK AAPHBAJICGENHCKLIOCCNOKFFK AHLFAMOKPLBGCAKFIKCIMNCIIK DDDLLLLDLDLLLLLDLDDDDLDLDL
CENTRAL CODE TRANSMISSION
The following command is available when working in "one code per scan".
APBPCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALEHGEIK AKCBPJCJGIIJCMCEGNNCGFELLK AEFBJLBGMHPKMIBIIDEEJMGEGK AAPHBAJICCEGCICHCIIKAKHBBK AGKFAKIIPDMIAKGAKBKGGBCIJK DLDLLLLDDDDLLLLDLLLDDLDLLL
APBPCOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALEBEHIK AKCBPJCJGIIJCMCEHMOOMKPFNK AEFBJLBGMHPKMPGMHGDIDKNFGK AAPHBAJIDBABHBIIMFMGGCBDHK AHKFAPJBDFPOKACFAENKOIFJLK DLDLLLLDDDDLLLLDDLLDDLDLLL
See par. 3.6 for details.

ORDER BY CODE LENGTH

The following command is available when working in "all codes per scan".
APBPCOHMFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFCGEIK AKCBPJCJGIIJCMCFHOJELKJJPK AEFBJLBGMHPKMKCAKJLKNHPGGK AAPHBAJIDCAGOBCKMPKFGOMHHK AHKFAKKCJLHAGINDAFHCKEFKJK DDDLLLLDLLDLLLLDDLDDDLDLLL
Enabled - Increasing Order
APBPCOHMFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFEEHIK AKCBPJCJGIIJCMCFGPKIBFCHJK AEFBJLBGMHPKMNFEFMMGHBEHGK AAPHBAJICBEBLIIFCCOJAGKFBK AGKFAPLLFNEGMCJGKAAOCNCLLK DDDLLLLDLLDLLLLDLLDDDLDLLL
Enabled - Decreasing Order
APBPCOHMFNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKEBEFIK AKCBPJCJGIIJCMCEHJODJHNFNK AEFBJLBGMHPLNNCAIOFODNNFGK AAPHBAJJDFAJLNGHHNPIOPFLFK AFKFAMNIAEHGKPNOHHGOGINLKK DDDLLLLDLLDLLLLDDLDDDLDLLL

ORDER BY CODE SYMBOLOGY

Set Order

APBPBPFOHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKEEAHIK AKCBPJCJGIIJCMCFGPKMGNENLK AEFBJLBGMHPKNJGKFLAALGHHGK AAPHBAJJCFCGFDNNCBIJALKDHK AGLFALNLKIAEAMIJIJEICMAIIK DLLLLLLDLDDLLLLDLDLDDLDLLL
Select the number of codes in the range 0-9. Select the Datalogic Standard Code Identifier for each above defined code from the table in Appendix C.

Autoscan

AUTOSCAN MODE
APCOCKHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALECAEIK AKCBPJCJGIIJCMCEGPNABHKFLK AEFBJLBGMHPLNJHNAJCHKOEEGK AAPHBAJICFAOBPKAGOMHCEGBBK AFLFAPPLOJIOMMBKLFDGKJIJKK DLDLLLLDDLDLLLLDLDLDDLDLLL

Enabled in Normal Mode

APCOCKHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALEECHIK AKCBPJCJGIIJCMCEHOOMLIBLNK AEFBJLBGMHPLNOAJPMFLAIPFGK AAPHBAJIDGEJEGAPIDILEMADHK AELFAKOCCPLIGGFPBAEKCAPIIK DLDLLLLDDLDLLLLDDDLDDLDLLL

Enabled in Pattern Mode

APCOCKHMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKFBCFIK AKCBPJCJGIIJCMCFGIKHDKOJJK AEFBJLBGMHPKMOHNCOMDEEGHGK AAPHBAJJCCABEDONNMJKKFPNDK AHLFAJIBHGIIALBHMHCKGFAIJK DLDLLLLDDLDLLLLDLDLDDLDLLL
See par. 3.4 for details.

AUTOSCAN AIMING SYSTEM

APCOCKHMFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFHAEIK AKCBPJCJGIIJCMCFHMJGMIHHPK AEFBJLBGMHPLNLEFCDNJOFNGGK AAPHBAJIDFEONGKNIJOIEANHHK AELFAPNBIBDGKOKJBBOCGMPLKK DDDLLLLDLDDLLLLDDDDDDLDLLL
APCOCKHMFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFBCHIK AKCBPJCJGIIJCMCFGNKKGHMJJK AEFBJLBGMHPLNMDBNGKFEDGHGK AAPHBAJICGAJIPACGEKECILFBK AFLFAKMIEHAAAEOMLEJOOFIKIK DDDLLLLDLDDLLLLDLDDDDLDLLL
AUTOSCAN HARDWARE TRIGGER
APCOCKFOHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKFBFHIK AKCBPJCJGIIJCMCEGOJNEKCHNK AEFBJLBGMHPLMOHHHCAIHBIEGK AAPHBAJIDCAJIFGOAAKEOHBFDK AHKFAPJLGOGCEACIDCMMAEDLLK DLDLLLLDDDLLLLLDLDDDDLDLDL
APCOCKFOHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKFHHEIK AKCBPJCJGIIJCMCEHPKBOFJJLK AEFBJLBGMHPLMJADIHHENHDFGK AAPHBAJICBEONMMBONOIIPHHFK AGKFAKICKIFEOKGNJHLAINEKJK DLDLLLLDDDLLLLLDDDDDDLDLDL
AUTOSCAN ILLUMINATION SYSTEM
APCOCKFOFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKEEFHIK AKCBPJCJGIIJCMCFHNNLJFPFJK AEFBJLBGMHPLMMEPFIPGDKBGGK AAPHBAJICCEJEMGDOHILIDKDFK AGKFAPLBAGNKCCJLJGBIMBEJLK DDDLLLLDLLLLLLLDDDLDDLDLDL
APCOCKFOFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKECHEIK AKCBPJCJGIIJCMCFGMOHDKELPK AEFBJLBGMHPLMLDLKNIKJMKHGK AAPHBAJIDBAOBFMMAKMHOLMBDK AHKFAKKIMAOMIINODDGEEIDIJK DDDLLLLDLLLLLLLDLDLDDLDLDL
The following commands can be activated only when One Code per Scan is enabled.

SAFETY TIME

APCOGOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFBDHIK AKCBPJCJGIIJCMCFGPNJLFMNJK AEFBJLBGMHPLNKCKDNPHGJJHGK AAPHBAJIDFGLNFMAGPFCDBKFHK AEKFAJIJKJCIIFOLICNICOFJIK DDLLLDLDDLLLLLLDDDLDDLDLLL
APCOGOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFHBEIK AKCBPJCJGIIJCMCFHOOFBKHDPK AEFBJLBGMHPLNNFOMIILMPCGGK AAPHBAJICGCMIMGPICBOFJMHBK AFKFAMJAGPBOCPKOCHKEKHCIKK DDLLLDLDDLLLLLLDLDLDDLDLLL

Valid only with software trigger or autoscan enabled. See par. 6.4.1 for details.

SAFETY TIME DURATION

APCOFPHMFNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALFEAHIK AKCBPJCJGIIJCMCFHPKMDPJLLK AEFBJLBGMHPLNOGKLEGCNHNGGK AAPHBAJJDFEMPNPJOPBNJHLFFK AHKFAIJABNLAGNIDIJBIALLJIK DLDLLDLDDLDLLLLDLLLDDLDLDL
Read a number in the range 01-99, where 01 corresponds to 100 ms and 99 to 9.9 seconds.

STAND AUTOSCAN MODE

APCOCKFMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJALFCFGIK AKCBPJCJGIIJCMCFHKPDLBGLLK AEFBJLBGMHPLMNDLMPIEMIOGGK AAPHBAJJCGAFBFKIIBFBLOBDBK AHKFANLPPPIEGLFMGPOAOAJKKK DLDLLLLDDDDLLLLDDLLDDLDLLL

Normal

APCOCKFMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJALFEHFIK AKCBPJCJGIIJCMCFGLMPBONFNK AEFBJLBGMHPLMKEPDKPIGOFHGK AAPHBAJJDFECEMAHGMBNNGHBHK AGKFAIKGDJLCMBBJMKJMGJOLIK DLDLLLLDDDDLLLLDLLLDDLDLLL

Pattern

APCOCKFMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJAKEBHHIK AKCBPJCJGIIJCMCEHNIEJMCHJK AEFBJLBGMHPKNKDLOIGACCMFGK AAPHBAJICBAKEJOFDDAMDPIPDK AFKFALMFGAICKMFBBNPMCMBLJK DLDLLLLDDDDLLLLDDLLDDLDLLL
Enter Cradle Configuration
AOAIGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFAGHIK AKCBPJCJGIIJCMCEGMNGOBKBJK AEFBJLBGMHPLMPEEEJKEBPIHGK AAPHBAJJCHEGKKELMEFNPDJFFK AHLFBINLDNIMKHJDEHLCADAJLK DDDDLDDLLDDLLLLDDDDDDLDLDL
Exit and Save Cradle Configuration
AOAICMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFGAHIK AKCBPJCJGIIJCMCEGJKPBHPLLK AEFBJLBGMHPLNIHAENDLMGFEGK AAPHBAJJDDGHFLHEBHKCGLFFHK AELFBJOABCEOENLELBPIIGNLLK DLLDLDDLDLLLLLLDDDLDDLDLLL

CAPTURE IMAGE

In order to capture an image, you should read one of these codes (for further details see par. 3.3), then point at the image subject and pull the trigger. The image will be captured and sent to the host PC according to the Preset Configuration.
Capture Image using Preset 1
AMHOHNBOHNGNENEIEPANHOGOCK AHLLMBIMDKEOFMHMLJAKEAGHJK AKCBPJCJGIIJCMCFGNOHPCPFPK AEFBJLBGMHPKMJAIMKEHDCDFGK AAPHBAJICFDBLOPJLLLDINFJHK AGLFAMIDGOMEEPCBGGNAIGCKIK DLDLLLLLDDLLLLLDLLDDDLDLLL
Capture Image using Preset 2
AMHOHNBOHNGNENEIEPANHOGOCK AHLJOBIMDKEOFMHMLJALEBAHJK AKCBPJCJGIIJCMCEGKLDJDCHNK AEFBJLBGMHPLMMDJHFAKOIPGGK AAPHBAJIDEFNILIMEJKHDCCJHK AEKFAPIEJAFCCKBLOMCOGKEJLK DDDLLLLLDLDLLLLDDDDDDLDLDL
Capture Image using Preset 3
AMHOHNBOHNGNENEIEPANHOGOCK AHLJMBIMDKEOFMHMLJAKEEHGJK AKCBPJCJGIIJCMCEHMJAAMGPPK AEFBJLBGMHPLNJAFIAEKDLGHGK AAPHBAJIDBCENNFBMABFEPANDK AHLFAPLLBHMECODCDJBCENMLLK DLDLLLLLDLLLLLLDDLDDDLDLDL
Capture Image using Preset 4
AMHOHNBOHNGNENEIEPANHOGOCK AHJLOBIMDKEOFMHMLJALEHAFJK AKCBPJCJGIIJCMCEGMPKJGGNLK AEFBJLBGMHPLNMCMJLMHOEAGGK AAPHBAJJDCFDMMNDJIGDNFCBDK AHKFAPPKGLEEMKLOEBLAEPPKIK DDLLLLLLDDLLLLLDLDDDDLDLDL

ADVANCED IMAGE CAPTURE

Image Preset 1

Basic Configuration

IMAGE FORMAT PRESET 1

Bitmap Format

APCNCOHMHNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKEFAEIK AKCBPJCJGIIJCMCEHOOCMJLDJK AEFBJLBGMHPLMNCFCEBDHHFHGK AAPHBAJICBHPNEJAFAJAHHBBFK AGKFAPKDLHDGKLOGIOPCIANLIK DDDLLLLDLDLLLLLDLLDDDLDLLL

JPEG Format

APCNCOHMHNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKEDCHIK AKCBPJCJGIIJCMCEGPNOGGANPK AEFBJLBGMHPLMKFBNBGPNBOGGK AAPHBAJIDCDIINDPLNNMBPHDDK AHKFAKLKHBAAABKDCLIOAJKKKK DDDLLLLDLDLLLLLDDLDDDLDLLL

TIFF Format

APCNCOHMHNGNENEIEPANHOGOCK AHHPMBAMDKEOFMHMLJALFGCFIK AKCBPJCJGIIJCMCFHJJFOEPPLK AEFBJLBGMHPKNKCFADPHJNHEGK AAPHBAJJCGHAIINNOCMNPGINHK AEKFAJNJCIDAGMOLPMOOEMFKLK DDDLLLLDLDLLLLLDLLDDDLDLLL

RESOLUTION PRESET 1

Full Resolution (640 x 480)
APCNCOHMFNGNENEIEPANHOGOCK AHHPMJAMDKEOFMHMLJAKFAAEIK AKCBPJCJGIIJCMCFGNKEBGGBNK AEFBJLBGMHPLMPBNAOONDMMFGK AAPHBAJIDBDPBNJNLHLPBDKHDK AHKFAPIJNPIOMJFFCKCGEFKJIK DLDLLLLDDLLLLLLDDLLDDLDLLL
Quarter Resolution (320 x 240)
APCNCOHMFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKFGCHIK AKCBPJCJGIIJCMCFHMJILJNPLK AEFBJLBGMHPLMIGJPLJBJKHEGK AAPHBAJICCHIEEDCFKPDHLMFFK AGKFAKJABJLIGDBAIPFKMMNIKK DLDLLLLDDLLLLLLDLLLDDLDLLL
JPEG QUALITY FACTOR PRESET 1

JPEG Quality Factor

APCNBPFOHNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALEGGHIK AKCBPJCJGIIJCMCFHMJMMBLFJK AEFBJLBGMHPLNMFHPMFHFNEEGK AAPHBAJJCGBPKPGKFJJDHGMDDK AGLFAOPAOMPKKNAPKGBMMNPLJK DDLLLLLDDDLLLLLDLDDDDLDLLL
Set the JPEG compression level in the range 000-100.

Advanced Configuration

WINDOW DIMENSIONS PRESET 1

Origin along X Axis

APCNBPHMDNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALFABEIK AKCBPJCJGIIJCMCEHMOIOMKPJK AEFBJLBGMHPKNMHOODCOCLGHGK AAPHBAJJDBGKJFDCLNJFBCJPFK AFKFAKNMANLECGFAIKPKIBHLKK DDLLLLLDLLDLLLLDDDLDDLDLDL
Read a number in the range 0-630

Origin along Y Axis

APCNBPFOBNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJAKFGEHIK AKCBPJCJGIIJCMCFGOODGOPPLK AEFBJLBGMHPKMJEMLCPPLPDFGK AAPHBAJJDGCNMGPBDENJLFFNBK AGLFAKJGOCOAMINBKJNEOJLLLK DLLLLLLDDLLLLLLDLDLDDLDLLL
Read a number in the range 0-470
APCNBPFMDNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALEAEGIK AKCBPJCJGIIJCMCFGJMLEKGBJK AEFBJLBGMHPKMIDICFINENMFGK AAPHBAJIDCGBJPDKFCADIIONFK AHLFAIJIBLLOIBBGFACMMIGIKK DDLLLLLDLDDLLLLDLLLDDLDLDL
Read a number in the range 10-640

Height

APCNBPFMBNGNENEIEPANHOGOCK AHPNIJAMDKEOFMHMLJALFFEGIK AKCBPJCJGIIJCMCEHKINJFLDNK AEFBJLBGMHPKMKAAAPHDAGFHGK AAPHBAJICCCBFGDHLFCMOMFLDK AGLFAILCHDAGODKFPEPIANBKKK DLLLLLLDDLDLLLLDDLDDDLDLDL
Read a number in the range 10-480

BRIGHTNESS PRESET 1

Increase

APAKHMFKFNGNENEIEPANHOGOCK AHJLJFGOPKEOFMHMLJAKEDHGKK AOJDPBCJGIIJCMCEGOLKBIGLCK AIFBJLBGMHPLNKFOPDLBPKNKOK AAPHBAJICGBMGPOCHHEBNAMFHK AHLFAKKFLHGOGEAFKMLMANFIKK DDLLDLLDLLDLLLLDLDLDDLDLLL
String Substitution Procedure End Selection Add String Character(s)
Add New String End String End Format
ANGKCIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFDGGIK AKCBPJCJGIIJCMCEHIIJCDNNLK AEFBJLBGMHPLMJHPNALEBLNEGK AAPHBAJJDECDIMLOHFEABEPBDK AHLFBJKMHHIKGLHMLAGMAEELLK DLLDDDDLLLDLLLLDDLLDDLDLDL
Output message: <43D7T7LOGICproduct43>
String Substitution Procedure a)

Substitute String

Define String to be Substituted
Read the Hex value from the Hex/Numeric table identifying the characters of the string to be substituted. Valid values are in the range 00-7F.

Substituting String

Define Substituting String
Read the Hex value from the Hex/Numeric table identifying the characters of the substituting string. Valid values are in the range 00-7F.

FIELD DELETION

NO Delete Field Delete Add new String YES Add NO End Format Definition Add String? Add
Example Decoded code: <DATALOGICproduct> Formatting procedure: Delete First Field + Delete Second Field + Add New String.
Field Deletion Procedure Delete
AMHLGLEKHNGNENEIEPANHOGOCK AHHPEBIMDKEOFMHMLJALEAHEIK AKCBPJCJGIIJCMCEHILFPJABJK AEFBJLBGMHPKNIFAMGIDOBPFGK AAPHBAJIDBDPFCPCBLBBIHELFK AGLFAMKAJEOIKHFKIGKEMGNILK DDLLLLLDLLLLLLLDDLDDDLDLLL
1st Field Starting Character
1st Field Ending Character

+ 41 +

Field Deletion Procedure 2nd Field Starting Character

+ 4C + 4F +

AMGNGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALEABEIK AKCBPJCJGIIJCMCFHJINBKHDLK AEFBJLBGMHPKNMAOENDIPHLFGK AAPHBAJIDBCEANCBBFLCKCCPBK AGLEBJMGIGHAKOKOCOEIAEIKIK DDLLLLDDDLDLLLLDLLDDDLDLDL

+ 70 + 72 +

Field Deletion Procedure End Selection Add String Character(s)
ANGKGKCKFNGNENEIEPANHOGOCK AHHPEBAMDKEOFMHMLJALEDCEIK AKCBPJCJGIIJCMCFGNKOLDHPNK AEFBJLBGMHPKNNBLBIKDNOPEGK AAPHBAJICGHGMLMOIAGMOMCHFK AELFBKMIOONGGOJPDEMGAAGJKK DLLDLDLLDLDLLLLDLDDDDLDLDL AMHNGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFCGEIK AKCBPJCJGIIJCMCEHKODEMDDPK AEFBJLBGMHPKMOBCLFFFACLGGK AAPHBAJIDBGAJHMKPCBLOPFBFK AHKEBMPDMCJKIFABFMGICEEIJK DLDLLLDDDLLLLLLDLLLDDLDLDL ANGOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCDGIK AKCBPJCJGIIJCMCEHJLONAJLLK AEFBJLBGMHPLMJGBFHKLALDGGK AAPHBAJJDECHGDKMOEDDMEBJBK AHLEBNKAODJIMPLGJNNKMCKJIK DDDLLLDDDLDLLLLDLDDDDLDLDL

This parameter can be used to automatically end data reception from the Host after the specific period of time. If no character is received from Host, after the timeout expires, any incomplete string (any string not terminated by <CR>) is flushed from the device buffer.

6.2 6.2.1

USB KEYBOARD Keyboard Speed
This parameter manages the transmission speed of characters to the Host. A fast Keyboard Speed allows rapid transmission of a great amount of characters (for example 2D codes), but it might not be compatible with slower systems.

6.3 6.3.1

CODE SELECTION Issue Identical Codes
This parameter manages the code transmission when more than one code containing the same information is detected in a single scan. All identical codes are transmitted to the Host when the parameter is enabled; if disabled, only one of the identical codes is sent.

6.4 6.4.1

READING PARAMETERS Safety Time
Safety time prevents the device from immediately decoding the same code more than once. A timeout can be set up to 9.9 seconds before the decoder will accept the same code. Reading is immediate if the code changes. The safety time parameter is not applicable when all codes per scan is enabled or when setting one read per cycle in normal (hardware) trigger operating mode.
CONFIGURATION EDITING COMMANDS
The following commands carry out their specific function and do not require reading the Enter or Exit and Save Configuration codes.

Command

Description Restore Gryphon D432/D432E reader default configuration:
AMHKGPBOFNGNENEIEPANHOGOCK AHHPMBIMDKEOFMHMLJAKECBEIK AKCBPJCJGIIJCMCEGNOKAKPHJK AEFBJLBGMHPKMKEPKAKIOABEGK AAPHBAJICFGFIBIPPOECDKIJBK AFKFBMIKBFKGOMKNNGLKGNNIKK DLLDLDLLDDLLLLLDDLDDDLDLLL
Transmit the Gryphon D432/D432E reader Software release.
AMHOGPBOFNGNENEIEPANHOGOCK AHHPEBAMDKEOFMHMLJAKEACHIK AKCBPJCJGIIJCMCEGNLFCLIPJK AEFBJLBGMHPKMKFLEFBNBOKHGK AAPHBAJIDGHLDGOMCOHJGAAFDK AGKFALIMCNPOKGIEIBDIOGHIKK DLLLLLLLDDDLLLLDLLLDDLDLDL
Transmit the Gryphon D432/D432E current configuration in ASCII format to Host.
AMHOHMEMHNGNENEIEPANHOGOCK AHPBIBAMDKEOFMHMLJALFHGFJK AKCBPJCJGIIJCMCEHJIPFPFLNK AEFBJLBGMHPLNOBPKFGHKGAGGK AAPHBAJIDBEDNCGFJDBLCCBHFK AELFAJJEFKLIMPLCLLEIOMIJLK DDDLLLLDLDLLLLLDDDLDDLDLDL
Transmit the Gryphon D432/D432E current data format configuration in ASCII format to Host.

TEST CODE SYMBOLS

Use these 1D and 2D test symbols to check that the reader is imaging and decoding properly, according to your configuration.

52637 48509

EAN-13

000992

Code 39 (Standard)

DataMatrix (Normal)

DataMatrix (Inverse)

MAINTENANCE

You do not need to perform regular preventative maintenance on the Gryphon D432/D432E reader. Do not try to open the case, because you might damage the interior electronic components and such action voids the warranty. You can keep your reader in good operating condition by: periodically cleaning the reading window using water or a mild detergent solution and a soft cloth or tissue. watching for any damage to the housing.

During the format definition the decoded string represented by #DS does not change.
Using Format Output in Format Definition
The input used by the above functions to define the code formatting usually corresponds to the decoded code (#DS). Actually, the formatting expression of each function can also format the result (output) produced by a preceding code formatting. The format output is represented as follow: #F<n>, where: <n> = format number in the range 1-4 #F = format output Being Format 5 not included in other format expression, the format number is in the range 1-4. Furthermore, since a format expression operates upon the output of the preceding formats, the expression defining Format 1 will never contain the result of another format. Example The following expression is used to define Format 3: #DS + FSTR<#F2, 6173 , 6263 , 0> The expression input consists of the decoded code and the result produced by Format 2 (#F2). The FSTR function searches for a defined substring within the #F2 result; then, it concatenates this substring and the decoded code. The result corresponds to #F3 output.

CODE IDENTIFIER TABLE

EAN/UPC
APCPCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKEGBHIK AKCBPJCJGIIJCMCEGOMAPFDLJK AEFBJLBGMHPLMNBJDBAMFHOEGK AAPHBAJJCCDBJLHEJOHAEJBBFK AEKFAMIOGAHEOFFNJLAMEFIJKK DLDLLLDLDLDLLLLDLDDDDLDLDL

CODABAR

APCPCIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALEEHFIK AKCBPJCJGIIJCMCFGJKHILNJLK AEFBJLBGMHPLMNGOJAGECBEFGK AAPHBAJICHELJEAHOIHPKBLLFK AFLFAIKFBDOOEJMDCFEIOGNIJK DLLLLLDLLLLLLLLDDLDDDLDLLL

CODE 128

APCLGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFFDEIK AKCBPJCJGIIJCMCEGPKEHAMLLK AEFBJLBGMHPKNKGMHMAGPDIFGK AAPHBAJICHAPGJKOACPJFHKLBK AHLFAOIHKPPIGNIKBLPOMOHKJK DLLLLLDLLLDLLLLDDLDDDLDLDL
APCPGMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFHEGIK AKCBPJCJGIIJCMCEGJKOCJLBJK AEFBJLBGMHPLMODJKELEOGJGGK AAPHBAJIDHCOFOGHOJOKLEHPDK AEKFAONHFDEIAADCBCKGGBAILK DDDLLDDLLLDLLLLDLLDDDLDLLL

CODE 93

APCLGIHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFHFGIK AKCBPJCJGIIJCMCFGIMDAOCJJK AEFBJLBGMHPKNKBLNNGOIFCEGK AAPHBAJJCCHFGGNNHEPGLPABBK AGKFAKKMNMGCMBBEKFLKGNCLKK DLDLLLDLDLLLLLLDLDDDDLDLLL

CODE 32

APCPCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFBCGIK AKCBPJCJGIIJCMCEGMNHNPOLLK AEFBJLBGMHPLNJANKACLDPEFGK AAPHBAJICDAPKPFIDKBFCMLPBK AHKFAPOMHMIKOKBFOEOMOENKLK DLLLLDDLDDLLLLLDLLLDDLDLDL

CODE 39

APCLCMHOFNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFDFEIK AKCBPJCJGIIJCMCEGKNNIGJBJK AEFBJLBGMHPKMNFIHIJJCKFGGK AAPHBAJIDDCOJIJBNBAGMPGLDK AELFAPLMIADKIHKNONLEELKIJK DDDLLLDLDDLLLLLDDLLDDLDLLL