SUBWOOFERS

Power Handling 2000 watts RMS / 2500 watts Peak Industrial design marries traditional HCCA styling cues with cutting edge technology Massive proprietary die-cast basket supports integrated Dual Gap motor assembly Ultra-rigid heat-hardened aluminum cone and tough NBR surround 3" two layer copper voice coil on aluminum former Proprietary AngleLock wiring terminals Die-cast mounting clamps integrated into tooled wrap-gasket Dual 2 or dual 4 ohm models in 10", 12", and 15" Winner of CES Innovations Award
SUBWOOFER POWER Fs.2 Fs.4 Qts.2 Qts.4 Vas.2 Vas.4 SENSITIVITY LINEAR EXCURSION DIMENSIONS ______________________________________________________________________________________________________
ENCLOSURE POWER SERIES SIZE IMPEDANCE FREQ. RESPONSE EFF DIMENSIONS ______________________________________________________________________________________________________
SPEAKER POWER NOMINAL IMPEDANCE FEATURES FREQ. RESPONSE SENSITIVITY DEPTH ______________________________________________________________________________________________________
Power Handling 200 watts RMS / 400 watts Peak Heavy Gauge Steel Basket Non-resonant Poly cone and synthetic rubber surround Poly-cotton Blend Spider Extended Vented Pole Piece Gold-plated Strain Relief Terminals Dual 2 or dual 4 ohm models in 10" and 12"

2.3/8 / 59mm

2 3/16 / 56mm

3 1/8 / 80mm

2 1/4 / 57mm

2 7/8 / 73mm

9.25 / 7.5

14 / 9.25

11.25 / 8

_________________

C-SERIES

COMPONENTS

features
Power Handling 50 watts RMS / 100 watts Peak for C5.2 and 75 watts RMS / 125 watts Peak for C6.2 Ideal for Upgrading Any Sound System Steel Baskets Fit Standard OEM Applications Euro-compatible Design 19mm Ceramic Dome Tweeters Swivel, Flush and Surface Mount Harness Offboard Passive 12 dB/Octave Crossovers

125 watts

8.75 / 5

11 / 7

3 / 76mm

9 / 6.5

11 / 6

2 3/4 / 71mm

32 x 21 x 14.5

30 x 19 x 13.5

60Hz 20kHz

55Hz 20kHz

80Hz 20kHz

85Hz 20kHz

H2 10.2

2.99 cu ft

1.24 cu ft

0.45 cu ft

1.79 cu ft

0.62 cu ft

4.42 cu ft
Low impedance to provide 33% more power.
19mm ceramic dome tweeters.

Parallel to 1 ohm

Power Handling 500 watts RMS / 1000 watts Peak Machined Custom Die-Cast Basket Open Loop Motor Design Metallized Poly Cone and Medium Roll NBR Surround Tight Small Sealed Box Performance Custom Tooled Reversible Wrap Gasket and Protective Magnet Boot Heavy Gauge Wire Terminals 2.5 Inch Voice Coil on Aluminum Former
Dual 10 and watt vented pre-loaded enclosures Custom-tuned vented enclosures providing punishing bass output levels Features hot new HP-series Open Loop subwoofers Value-add badging makes drop-in sales easy

COAXIALS

Ideal for upgrading any Sound System 3 ohm voive coils for maximum output from your radio Steel Baskets Fit Standard OEM Applications Euro-compatible Design 19mm Ceramic Dome Tweeters Swivel, Flush and Surface Mount Harness Offboard Passive 12 dB/Octave Crossovers

27.75Hz

9mm ceramic dome tweeters.

ENCLOSURES

50 watts

75 watts

1.32 cu ft

2500 watts

H2 12.2

H2 15.2

C2 102/104

400 watts

C2 122/124
1 titanium dome tweeter. Surface, angled, and flush mounting hardware Included.

1.78 cu ft

0.56 cu ft

1.63 cu ft

45Hz 20kHz

87 / 85dB

85 / 83dB

87 / 86dB

75Hz 20kHz

91 / 89dB

90Hz 20kHz
Power Handling 125 watts RMS / 175 watts Peak Proprietary Orion Tooled Die-Cast Baskets Aluminum Vapor Deposit Injection-molded Poly Cone 6mm Linear One-way Excursion for Up-front Bass Tough Santoprene Surround for Enhanced Low Frequency Response One Inch Vapor Deposit Titanium Dome Tweeter Biampable 18 dB/Octave Crossover Tweeter Level and Polarity Switches

SPEAKER SPECIFICATIONS SPEAKER SPECIFICATIONS

P-SERIES

29.46Hz

2 x 12

40 watts

______________

2000 watts continuous / 2500 watts peak
500 watts continuous / 1000 watts peak
200 watts continuous / 400 watts peak

4 ohms

3 ohms

BP-HP10D4

1000 watts peak x 2

2000 watts

125 / 175 watts

75 / 125 watts

50 / 100 watts

40 / 80 watts

BP-HP12D4

HP-10D2 / 4

HP-12D2 / 4

HP 10D2/10D4

1000 watts

HP 12D2/12D4

C/ 104

C/ 124

Orion HP

2 x 10

22.8 x 10.2 x 2.4 (580mm x 260mm x 61mm)
12.6 x 10.2 x 2.4 (320mm x 260mm x 61mm)
7.9 x 10.2 x 2.4 (200mm x 260mm x 61mm)
9.8 x 10.2 x 2.4 (250mm x 260mm x 61mm)
7.0 x 10.2 x 2.4 (180mm x 260mm x 61mm)
AMPLIFIER POWER OUTPUT SIGNAL PROCESSING FUSE SIZE DIMENSIONS __________________________________________________________________________________________________________________
11 x 10.2 x 2.4 (280mm x 260mm x 61mm)
6.3 x 10.2 x 2.4 (160mm x 260mm x 61mm)

ATTITUDE

THE WORLDS LEADING HIGH PERFORMANCE CAR AUDIO BRAND GETS SOME AWESOME NEW UPGRADES IN 2006 Hardcore Attitude
Since the beginning, Orion has been all about High Performance Car Audio and Hardcore Attitude. Attitude thats hammered into the DNA of every piece of industrial-strength Orion Car Audio equipment, and the players who use and abuse it, the bass-heads and boulevard bullies who will testify that the baddest car and the loudest system ride on the same chassistheirs! SPL competitors, world champions, hot-rodders and urban cruisers alike are motivated to roll with the bulletproof performance and legendary muscle that is Orion Car Audio.

HARD-CORE

HIGH CURRENT COMPETITION CLASS D AMPLIFIERS
HIGH PERFORMANCE PURE MOSFET AMPLIFIERS features
Variable low-pass 50Hz to 500kHz, variable high-pass with INTELLi Q 50Hz to 500kHz, 10dB of boost with INTELLi Q, remote gain capable, selectable AUX out
Variable low-pass 30Hz to 250Hz, variable high-pass with INTELLi Q 20Hz to 150Hz, 10dB of boost with INTELLi Q, remote gain capable, selectable AUX out
Proprietary Orion Industrial Design with illuminated badging Directeds patent pending ESP (except model HCCA-D600) Massive loosely-regulated MOSFET power supply IntelliQ Bass Optimization Circuit and RemoteGain Control Heavy Gauge Direct-wire High Current Power and Speaker Terminals 18dB/octave Low-pass Filter

Proprietary Orion Industrial Design with illuminated badging Directeds patent pending ESP (models HP-2800, HP-4800) Massive loosely-regulated MOSFET power supply All new pure MOSFET output stage design Intelli-Bass Equalization Circuit and Remote Gain Option (remote bass optional on models HP-2800, HP-4800) Heavy Gauge Direct-wire High Current Power and Speaker Terminals 12dB/octave High- and Low-pass Filter

MPLIFIER SPECIFICATION

HCCA HPAMPLIFIERS AMPLIFIERS
DIRECTED AUDIO ESSENTIALS ARE ENGINEERED TO OPTIMIZE THE PERFORMANCE OF YOUR ORION AUDIO COMPONENTS, AND RECOMMENDED FOR USE WITH ALL OTHER BRANDS OF FINE MOBILE AUDIO PRODUCTS.
Get the winning performance you expect by matching it with the nest power

(2) 30 ATC

(1) 40 ATC

(2) 20 ATC

(2) 40 ATC

(3) 40 ATC

(2) 15 ATC

(1) 20 ATC

delivery components, cabling and noise-free signal cables available: Directed Audio Essentials! These super-premium audio accessories deliver pure, free-owing sound by utilizing only the highest quality materials and precision machined black chrome-plated components for maximum signal transfer. Oxygen-free copper cabling ensures that nothing is lost or added as the music ows unimpeded from source to destination! Your ampliers will deliver every watt of audio power available when they rely on unbeatable Directed Audio Essentials Power Capacitors and professional grade battery adapters, heavy-duty terminals, fuses and fuse holders. Our award-winning audio adapters offer seamless integration of aftermarket audio systems with original equipment radios. Unwanted vehicle resonance
DIRECTEDS PATENT PENDING ESP
Anti-theft protection and valet mode renders your amp useless to thieves or parking attendants Built-in self-diagnostics allows installer to recall shutdown historyavoids time-consuming service visits Digitally programmed input voltage for fast, accurate system setup Input sensitivity lock-out modelock the tweakers out! Digital control over cooling fan operation, turn-on delay
Variable low-pass 30Hz to 250Hz, variable high-pass with Infrasonic 20Hz to 150Hz, 18dB of boost with INTELLi Bass, remote gain capable

Variable low-pass 50Hz to 500kHz, variable high-pass from 50Hz to 500kHz, 16dB of boost with INTELLi Bass

AMPLIFIER SPECIFICATIONS

Variable low-pass 50Hz to 500kHz, variable high-pass from 50Hz to 500kHz, 10dB of boost with INTELLi Q
and noise is easily tamed with Sound Off damping material. Directed Audio Essentials gives your system the edge
Variable high-pass / low-pass crossover from 50Hz to 500kHz, 16dB of boost with INTELLi Bass

HCCA-D5000

HP-2300
it needs to win in the competition lanes and on the highways!

Orion Technology

Every Orion amp, sub and speaker is designed from the ground up by audio engineers and product specialists dedicated to the heritage, attitude and raw hardcore power of Orion. Never anything off the shelfonly off-the-hook outrageous performance from carefully designed and engineered components, manufactured from pure metals and mil-spec components and to exacting specications. The 2006 Orion Car Audio lineup proudly continues the Orion Industries legacy, standing up once again as the best and the strongest in a market overowing with wanna-bes and chrome-plated posers.

HP-2400

HCCA-D600

HP-2600

100 watts

YOUR AUTHORIZED DEALER

HCCA-D1200

250 watts

YOUR DEALER

HP-4600

1 x 1000 @ 4 ohms / 1 x 1600 @ 2 ohms / 1 x 2500 @ 1 ohm
1 x 425 @ 4 ohms / 1 x 800 @ 2 ohms / 1 x 1200 @ 1 ohm
1 x 250 @ 4 ohms / 1 x 400 @ 2 ohms / 1 x 600 @ 1 ohm
2 x 125 @ 4 ohms / 2 x 200 @ 2 ohms / 1 x 400 @ 4 ohms
2 x 100 @ 4 ohms / 2 x 180 @ 2 ohms / 1 x 300 @ 4 ohms
1 x 125 @ 4 ohms / 1 x 225 @ 2 ohms / 1 x 300 @ 1 ohm
2 x 75 @ 4 ohms / 2 x 130 @ 2 ohms / 1 x 225 @ 4 ohms

HCCA-D2400

425 watts
2 x 50 @ 4 ohms / 2 x 100 @ 2 ohms / 1 x 200 @ 4 ohms
4 x 65 @ 4 ohms / 4 x 100 @ 2 ohms / 2 x 200 @ 4 ohms
4 x 50 @ 4 ohms / 4 x 75 @ 2 ohms / 2 x 150 @ 4 ohms

HP-4800

DIRECTED IS A PROUD MEMBER OF

65 watts

W W W.ORIONCAR AUDIO.COM
Designed and Engineered in USA by

HP-2800

HP-RB1 Remote Bass Control
_ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2006 Directed Electronics. All Rights Reserved. 903F 04.06