CAUTION: General Safety Instructions
Use the following safety guidelines to help ensure your own personal safety and to help protect your equipment and working environment from potential damage. NOTE: Additional user information for your printer may be available in the "Manuals" section at support.dell.com. IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient.

SAFETY: General Safety

When setting up the equipment for use: NOTE: Review the weight limits referenced in your computer documentation before placing a printer or other devices on top of your computer.
Place the equipment on a hard, level surface, and never in a closed-in wall unit, or on a sofa, rug or bed. Avoid placing loose papers underneath your device. Leave 10.2 cm (4 in) minimum of clearance on all vented sides of the computer to permit the airflow required for proper ventilation. Restricting airflow can damage the equipment or cause a fire. Do not stack equipment or place equipment so close together that it is subject to recirculated or preheated air Keep your device away from radiators and heat sources. Keep your equipment away from extremely hot or cold temperatures to ensure that it is used within the specified operating range. Do not push any objects into the air vents or openings of your equipment. Doing so can cause fire or electric shock by shorting out interior components. Ensure that nothing rests on your equipment's cables and that the cables are not located where they can be stepped on or tripped over.
When operating your equipment:
Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement. Do not use AC powered equipment during an electrical storm. Battery powered devices may be used if all cables have been disconnected. If your device includes an integrated or optional (PC card) modem, disconnect the modem cable if an electrical storm is approaching to avoid the remote risk of electric shock from lightning via the telephone line. If your device includes a modem, the cable used with the modem should be manufactured with a minimum wire size of 26 American wire gauge (AWG) and an FCC compliant RJ-11 modular plug.
This product may contain Optical Disk Drives (ODD), such as a CD-ROM, CDR/W, DVD drive, etc., which have built-in laser devices. To prevent any risk of exposure to laser radiation, do not disable or open any ODD assembly for any reason. These ODDs comply with safety requirements and are classified as Class 1 Laser Products, under the US DHHS Standard and IEC/EN60825-1 Laser Safety Standard. These ODD devices contain no user adjustments nor any user serviceable or replaceable parts. Do not spill food or liquids on your equipment. Before you clean your equipment, disconnect it from the electrical outlet. Clean your device with a soft cloth dampened with water. Do not use liquids or aerosol cleaners, which may contain flammable substances. Clean the Printer display with a soft, clean cloth and water. Apply the water to the cloth, then stroke the cloth across the display in one direction, moving from the top of the display to the bottom. Remove moisture from the display quickly and keep the display dry. Long-term exposure to moisture can damage the display. Do not use a commercial window cleaner to clean your display. CAUTION: Do not operate your equipment with any cover(s), including external or internal covers, bezels, filler brackets, front-panel inserts, etc., removed.
If your equipment does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

SAFETY: Laser Printer

Dell Laser Printers comply with safety requirements and are classified as Class 1 Laser Products, under the US DHHS Standard and IEC/EN60825-1 Laser Safety Standard. The radiation from the lasers emitted inside the printer is completely confined within protective housings and external covers, and the laser beam cannot escape during any phase of normal user operation. CAUTION: Using controls, making adjustments, or performing procedures other than those specified in your user documentation or in instructions provided to you by Dell may result in exposure to hazardous radiation.
SAFETY: When Working Inside Your Device
Do not attempt to service the equipment yourself, except as explained in your Dell documentation or in instructions otherwise provided to you by Dell. Always follow installation and service instructions closely.
To help avoid the potential hazard of electric shock, do not connect or disconnect any cables, or perform maintenance or reconfiguration of your equipment during an electrical storm. PC Cards may become very warm during normal operation. Use care when removing PC Cards after their continuous operation.
SAFETY: General Power Safety
Observe the following guidelines when connecting your equipment to a power source:
Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available power source. Also, ensure that your printer and attached devices are electrically rated to operate with the AC power available in your location. Do not plug the equipment power cables into an electrical outlet if the power cable is damaged. To prevent electric shock, plug the equipment power cables into properly grounded electrical outlets. If the equipment is provided with a 3-prong power cable, do not use adapter plugs that bypass the grounding feature, or remove the grounding feature from the plug or adapter. Norway and Sweden: If this product is provided with a 3-prong power cable, connect the power cable to a grounded electrical outlet only. If you use an extension power cable, ensure that the total ampere rating of the products plugged in to the extension power cable does not exceed the ampere rating of the extension cable. If you must use an extension cable or power strip, ensure the extension cable or power strip is connected to a wall power outlet and not to another extension cable or power strip. The extension cable or power strip must be designed for grounded plugs and plugged into a grounded wall outlet. If you are using a multiple-outlet power strip, use caution when plugging the power cable into the power strip. Some power strips may allow you to insert a plug incorrectly. Incorrect insertion of the power plug could result in permanent damage to your equipment, as well as risk of electric shock and/or fire. Ensure that the ground prong of the power plug is inserted into the mating ground contact of the power strip. Be sure to grasp the plug, not the cable, when disconnecting equipment from an electric socket.

If your equipment uses an AC adapter:
Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion. NOTE: Refer to your system rating label for information on the proper adapter model approved for use with your device.
Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter inside a carrying case. The AC adapter may become hot during normal operation of your printer. Use care when handling the adapter during or immediately after operation. It is recommended that you lay the adapter on the floor or desk so that the green light is visible. This will alert you if the adapter should accidentally go off due to external effects. If for any reason the green light goes off, disconnect the AC power cord from the wall for a period of ten seconds, and then reconnect the power cord.
SAFETY: If Your Device Gets Wet
CAUTION: Before you begin any of the procedures in this section, see the SAFETY: General Safety section of this document. CAUTION: Perform this procedure only after you are certain that it is safe to do so. If the printer is connected to an electrical outlet, turn off the AC power at the circuit breaker, if possible, before attempting to remove the power cables from the electrical outlet. Use the utmost caution when removing wet cables from a live power source. 1. Disconnect the AC adapter from the electrical outlet, and then, if possible, disconnect the AC adapter from the device. 2. Turn off any attached external devices, then disconnect them from their power sources, and then from the device. 3. Contact Dell support. See your User's Guide or Owner's Manual for the appropriate contact information. NOTE: See the Limited Warranties and Return Policy section of this document or separate paper warranty document that shipped with your monitor or computer for information on your warranty coverage.
SAFETY: If You Drop or Damage Your Printer
CAUTION: Before you begin any of the procedures in this section, see the SAFETY: General Safety and Power Safety sections of this document. CAUTION: If any internal components can be seen through damaged portions, or if smoke or unusual odors are detected, disconnect the device from the electrical outlet and contact Dell support. See your User's Guide or Owner's Manual for the appropriate contact. 1. Save and close any open files, exit any open programs, and shut down the computer. 2. Turn off the printer and disconnect from the power source, and then disconnect from the computer. 3. Turn off any attached external devices, and disconnect them from their power sources and then from the computer. 4. Connect the printer to the power source and turn on the printer. 5. If the device does not start, or if and smoke or unusual odors are detected, or you cannot identify the damaged components, contact Dell support. See your User's Guide or Owner's Manual for the appropriate contact information).

Protecting Against Electrostatic Discharge
CAUTION: Disconnect product from mains power source in accordance with productspecific safety information located on the Safety Information section of this website. Electrostatic discharge (ESD) events can harm electronic components inside your computer. Under certain conditions, ESD may build up on your body or an object, such as a peripheral, and then discharge into another object, such as your computer. To prevent ESD damage, you should discharge static electricity from your body before you interact with any of your computers internal electronic components, such as a memory module. You can protect against ESD and discharge static electricity from your body by touching a metal grounded object (such as an unpainted metal surface on your computers I/O panel) before you interact with anything electronic. When connecting a peripheral (including handheld digital assistants) to your computer, you should always ground both yourself and the peripheral before connecting it to the computer. In addition, as you work inside the computer, periodically touch a metal-grounded object to remove any static charge your body may have accumulated. You can also take the following steps to prevent damage from electrostatic discharge: When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component. Just before unwrapping the antistatic package, be sure to discharge static electricity from your body. When transporting a sensitive component, first place it in an antistatic container or packaging. Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic floor pads and work bench pads.

Worldwide Regulatory Compliance Engineering and Environmental Affairs
MARKETING NAME*: Dell Precision M4400, Dell Precision M4400n REGULATORY MODEL: PP30L REGULATORY TYPE: 07203 EFFECTIVE DATE: January 7, 2011

Dell Inc. www.dell.com

TABLE OF CONTENTS FOR PRODUCT SAFETY, EMC & ENVIRONMENTAL DATASHEET

Regulatory

I. II. III. IV. V. VI. VII. Product Safety Electromagnetic Compatibility Ergonomics, Acoustics, and Hygienics NFPA Conformity Statement Power Cords and User Documentation Datasheet Responsible Party Name and Address Trade Import/Export Compliance Data

Environmental

VIII. IX. X. XI. XII. XIII. XIV. XV. XVI. System Dimension and Weight Declarations and Certifications Performance Data Product Materials Information Packaging Batteries Design for Environment Recycling/End-of-Life Service Information Dell Corporate Environmental Information

PRODUCT SAFETY1

The product has been certified and bears the Mark, as applicable, of the Product Safety authorities as indicated below. Country/Region Authority or Mark
Argentina Australia Belarus Cambodia Canada China Croatia European Union Germany IECEE Israel Kazakhstan Kenya Mexico Moldova Nigeria Norway Russia Saudi Arabia Singapore South Africa South Korea Taiwan Ukraine United States United States Uzbekistan IRAM NATA BELLIS ISC SCC CNCA or CCC KONCAR CE TUV IECEE CB SII OTAN CKT KEBS NYCE or NOM INSM SONCAP NEMKO GOST KSA ICCP Safety Registration Scheme NRCS KETI (eK) BSMI UKRTEST or UKRSERTCOMPUTER NFPA NRTL STZ
* Notice: This product has been assigned a unique regulatory model and regulatory type that is imprinted on the product shipping invoice and product labeling to provide traceability to the regulatory approvals noted on this datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type including marketing names other than those listed on this datasheet. Requests for specific information on product regulatory approvals should reference the assigned product regulatory model and type. 1 The above-listed Product Safety certifications may vary depending upon the location of the Dell factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchasers country. Product Safety certification is specific to the AC Adapter only.
This model Dell notebook for use with the following adapters:
Flextronics: FA90PE0-.; FA90PE1-.; FA90PE2-.; FA90PE3-.; FA90PS0-00; FA90PS1-00; FA130PE1-.; FA65NE0-.; FA65NE1-., FA90PM10A-00; FA065LS1-.; LiteOn: LA90PE0-.; LA90PE1-.; LA90PS0-.; LA90PS1-.; LA65NE0-.; LA65NE1-.; LA65NS2-.; Delta: DA65NS3-00; DA90PE0-.; DA90PE1-., DA90PE3-xx,; DA90PS1-00; DA90PS2-00; DA130PE1-XX; Hipro/Chicony: HA90PE0-00, HA90PE1-00, HA65NE0-00, HA65NE1-00, HA65NS5-00 Astec: EA90PE1-xx
ELECTROMAGNETIC COMPATIBILITY2
The product has been certified and bears the Mark, as applicable, of the EMC authorities as indicated below. Country/Region Authority or Mark Class
Australia / New Zealand Belarus Bosnia & Herzegovina, Montenegro, Serbia Canada China Croatia European Union Israel Japan Kazakhstan Moldova Norway Russia South Africa South Korea Taiwan Ukraine United States Uzbekistan Vietnam ACMA or C-Tick BELLIS KVALITET ICES CNCA or CCC KONCAR CE SII VCCI OTAN CKT INSM NEMKO GOST SABS KCC BSMI UKRTEST or UKRSERTCOMPUTER FCC STZ ICT Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B Class B
ERGONOMICS, ACOUSTICS AND HYGIENICS3
The product has been certified and bears the Mark, as applicable, of the Ergonomics, Acoustics and Hygienics authorities as indicated below. Country/Region Authority or Mark

Germany Russia GS GOST

NFPA 99 Conformity Statement
All AC Adapters provided with Dell notebook computers comply with the chassis leakage current requirements as defined by clause 8.4.1.3.5 of National Fire Protection Association standard NFPA 99:2005leakage current equal to or less than 300uA @ 127 VAC/60 Hz.

The above-listed EMC certifications may vary depending upon the location of the Dell factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchasers country. 3 The above-listed Ergonomics, Acoustics and Hygienics certifications may vary depending upon the location of the Dell factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchasers country.
Product Safety, EMC & Environmental Datasheet Page 2
POWER CORDS AND USER DOCUMENTATION
Dell products are provided with the power cord and user documentation suitable for the intended country of delivery. Products that are relocated to other countries should use nationally certified power cords and plugs to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user documentation in other languages is available for your market.
DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS
Dell Inc. Department: Global Regulations and Standards MS: PS4-30 Round Rock, Texas 78682, USA 512-338-4400 Regulatory_Compliance@Dell.com
VII. TRADE (IMPORT/EXPORT) COMPLIANCE DATA
System US Harmonized Tariff System (USHTS) Number System US Export Control Classification Number (ECCN) 8471.30.0100
For additional questions regarding importing & exporting classification of Dell products, please send an e-mail to: US_Export_Classification@Dell.com
VIII. SYSTEM DIMENSION AND WEIGHT
Depth, cm 24.4 Width, cm 35.8 Height, cm 2.7 (Front) 3.1 (Back) Weight, kg 2.5 (May vary with additional options installed)
DECLARATIONS AND CERTIFICATIONS
This system received the following approvals and may be labeled with one or more of these marks depending on point of purchase: Yes / No / Approvals Certificate # N/A Energy Star 5.0 Capable N/A Yes Link below for Varies by * EPEAT registration status Country
* EPEAT registered where applicable/supported see product links for respective registration status by country: Desktops, Monitors, Notebooks, Workstation-Desktops, and Workstation-Notebooks. Information on Dells participation in various Eco-labels and Green Standards can be found here. Dell is a member of the Electronic Industry Citizenship Coalition (http://www.eicc.info/)

Product Safety, EMC & Environmental Datasheet Page 3
Through internal design controls and supply chain declarations, this system has been verified to comply with the EU RoHS Directive. For more details, see www.dell.com/rohsinfo. All Dell products shipping directly into China which are manufactured on or after March 1st, 2007, will be China RoHS compliant. For more details, see www.dell.com/chinarohs. All Dell products shipping to South Korea are compliant with South Korea RoHS requirements, declarations here. Information on Japan RoHS (J-MOSS) chemical disclosures is available here. REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Unions (EU) chemical substances regulatory framework. Dell complies with the REACH directive. For more details, see www.dell.com/REACH Dells Energy Star qualified products are listed on the EPA website here
PERFORMANCE DATA System Configuration
The Energy Consumption and Declared Noise Emissions data is based on a configuration including: Processor 1 2.8 GHz Intel Hard Drive(s) GB CD-ROM CD/RW/DVD Memory 8 GB

Energy Consumption4

Service Level *Maximum Minimum ACPI-S3 Standby Mode ACPI-S4 Hibernate Mode Off Low Power Mode Disabled Off Low Power Mode Enabled External Power Supply Energy Consumption (Wattage) 67.56 17.49 1.86 1.678 N/A N/A 0.306 BTU Calculation 231.0552 59.8158 6.3612 5.73876 N/A N/A 1.04652 Description of Service Level The system is running programs to maximize the power consumption. The system is tested in compliance to Energy Star 4.0 "idle" mode. The system is in a low-power sleep mode otherwise known as "Standby" or "Suspend to Ram". The system is in a low-power sleep mode otherwise known as "Hibernate" or "Suspend to Disk". System is turned off. If the Low power Mode feature is available, it is disabled via the BIOS. If not an option the unit is off. System is turned off with the Low power Mode feature (if available) is enabled via the BIOS. AC adapter is tested with no load attached.
*Maximum Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed above.
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
Product Safety, EMC & Environmental Datasheet Page 4

Energy consumption is tested at 230 Volts / 50 Hz. Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour. Off data is not meant to show compliance to US Executive Order 13221. When applicable, Dell product information related to US Executive Order 13221 may be obtained at: http://oahu.lbl.gov/index.html.
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Service Level Floppy Drive Accessing CD Drive Accessing Hard Drive Accessing Idle
(1 bel=10 decibels, re 10-12 Watts)
Sound Power (LWAd, bels) N/A 4.2.8
(LpAm, decibels) (re 2x10-5 Pa)
Sound Pressure Operator Position N/A 40.9 23.9 21.6
PRODUCT MATERIALS INFORMATION5 Restricted Substances
This Dell product does NOT contain any of the following substances (in concentrations exceeding legal threshold limits): Asbestos Azo dyes/colorants in components that come into direct contact with human skin Cadmium and its compounds (except for use in applications exempted by the EU RoHS Directive) Class I and Class II CFCs (chlorofluorocarbons) and HCFCs (hydrofluorocarbons) Chloroparaffins, short chained (10-13 carbon chain) Chromium VI and its compounds (except for use in applications exempted by the EU RoHS Directive) Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated dibenzofurans) Lead and its compounds (except for use in applications exempted by the EU RoHS Directive) Mercury (except for use in applications exempted by the EU RoHS Directive) Nickel and its compounds in components that are likely to result in prolonged skin exposure PCBs (polychlorobiphenyls) or PCTs (polychloroterphenyls) PBBs (polybromobiphenyls) or PBDEs (polybrominated diphenylethers) PVC (polyvinyl chloride) in plastic parts greater than 25 grams Polychlorinated naphthalenes (PCNs) Tributyl tin (TBT) and triphenyl tin (TPT) compounds For information on Japan RoHS (J-MOSS) chemical disclosures: www.dell.com/japan_rohs.
Additional Materials Information
The cables may use PVC as an insulating material to ensure product safety The case material is : >PC+ABS< Product may contain post-industrial recycled content (plastics, metal, glass)

Mercury Information

Number of bulbs 1 0
Average per bulb 3 mg for CCFL 0 mg for LED
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as listed above.

Product Safety, EMC & Environmental Datasheet Page 5
Flame Retardants Used in Mechanical Plastic Parts > 25 grams and Motherboards
Part Motherboard Mechanical Plastic Parts > 25 grams PC+ABS Mechanical Plastic Parts > 25 grams >PC< Flame Retardant TBBPA Organic Phosphorous Organic Phosphorous ISO 1043-4 FR(16) FR(40) FR(40)

XII. PACKAGING

No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging material. Chromium, lead, mercury, or cadmium are not intentionally added to packaging materials and are not present in a cumulative concentration greater than 100 ppm as incidental impurities. No halogenated plastics or polymers are used for packaging material. Dell complies with the EU Directive 94/62/EEC. Packaging Materials Outer Carton Anti-static Bag Pulp Mold Printed user documentation is bleached in a chlorine-free process. (Europe Only) Weight, kg 1.066 0.0145 0.15

XIII. BATTERIES

Batteries in this product are not based on mercury, lead or cadmium technologies. The batteries used in this product are in compliance with EU Directive 91/ 157/ EEC, EU Directive 93/ 86/ EEC, EU Directive 98/ 101/ EEC, and EU Battery Directive 2006/66/EC. The product documentation includes instructional information on the proper removal and disposal of the batteries used in this product. Below is a listing of batteries present in the product: Battery Description Internal Batteries Rechargeable 4, 6 or 9-cell 3-V CR2032 Coin Cell Battery Type Lithium Ion Lithium Ion
XIV. DESIGN FOR ENVIRONMENT Longevity and Upgrading
Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing. To extend the life of your system, you can install or upgrade certain system components (e.g., microprocessor, memory, expansion cards, and storage devices). Spare parts are available after the end of production for up to five years, or otherwise through the warranty period.

Recyclability

For recyclability, this system incorporates the following design guidelines: EU WEEE mark is applied to products sold in Europe, EU recycling information can be found at www.euro.dell.com/recycling Minimal use of non-separable connections, such as gluing and welding between different materials. Minimal use of composite structure materials. Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials.
Product Safety, EMC & Environmental Datasheet Page 6
XV. RECYCLING/ END-OF-LIFE SERVICE INFORMATION
Take back and recycling services are offered for this product in certain countries. If you want to dispose of system components, contact Dell for instructions by emailing recycling_emea@dell.com or visit www.dell.com/recyclingworldwide and select the relevant country.

XVI. DELL CORPORATE ENVIRONMENTAL INFORMATION
Information on Dells Environmental www.dell.com/environment. initiatives, policies, programs and goals can be found at
Product Safety, EMC and Environmental Datasheets for Dell products are located at: www.dell.com/regulatory_compliance_datasheets
Product Safety, EMC & Environmental Datasheet Page 7