AVR2807_E3.qxd

06.2.23 4:38 PM

Page 1

A/V Surround Receiver

AVR-2807

The AVR-2807 is Denon's latest addition of versatile A/V Receivers, which incorporate all current surround formats and enhanced installation flexibility, all with great simplicity of setup and operation.

Audio section

Full discrete 7-channel high power amplifier Front 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Center 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Surround 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Surround back 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Latest 32-bit floating point DSP for the decoder 24-bit/192-kHz D/A converter 96kHz A/D converter 'AL24 Processing Plus,' for high sound quality Digital interface receiver supporting 24-bit/192-kHz signals Large-output power amp section and power supply configuration, for stable high-power output Stable power supply for high-quality sound and picture playback Pure Direct mode, for the pure enjoyment of music in high-quality sound Supports the most advanced surround playback formats Dolby Digital EX Dolby Digital Dolby Pro Logic IIx DTS-ES DTS 96/24 DTS Neo:6 DTS Configurable surround back amplifiers Multi-zone system: a 5.1-channel theater in the main room and a stereo environment in a second room. "Bi-amp" system: Front (L/R) channels are bi-wired in a 5.1-channel theater to improve playback quality in the front for enhanced listening enjoyment.
Video Up/Down conversion capable of output to HDMI The AVR-2807 includes a video up/down conversion function that allows the unit to be connected to the video monitor via a single cable regardless of the video input signal's format as follows: 1) Composite video signals are converted to HDMI (*2), component video, & S-video; 2) S-video signals are converted to HDMI (*2), component video, & composite video; 3) Component video signals are converted to HDMI (*2), composite video (*3), & S-video (*3).
*2. I/P conversion from 480i/576i to 480p/576p *3. Down-conversion from component video to composite or S-video applies only to 480i input signals.
High-speed, high-accuracy 12-bit/216-MHz Video DAC I/P conversion from 480i to 480p ( When a 480i/576i signal is input from a Composite Video, S-Video, or Component terminal, it should be output from the HDMI terminal.) 3 Sets of Component Video Inputs High Definition Quality Video Switching Composite and S-video signal processing The AVR-2807 uses a time base corrector (TBC) in converting composite video & S-video signals to component video to suppress jitter in the video signal during playback.
Connectivity/ Expandability
Variable subwoofer crossover switching (40/60/80/90/100/110/120/150/200/250Hz) ASD-1R iPod Control Dock (option): Supports iPod playback when connected to the AVR-2807 iPod (*4) playback can be enjoyed through the AVR-2807 when the ASD-1R, Denon's original iPod Control Dock (sold separately), is connected to the dedicated control terminal of the AVR-2807. The iPod can also be controlled via the remote controller supplied with the AVR-2807.

Video section

HDMI digital video interface supporting high-quality video of 1080p (*1) The AVR-2807 has HDMI digital video interface terminals (2 inputs and 1 output) that can be switched for high-resolution 1080p video signal transmission. These HDMI terminals also support digital input of multi-channel audio signals.
*1) Version 1.1 compliant. Since HDCP is also supported, video cannot be viewed on a non-HDCP display connected to the AVR-2807; please connect a HDCP-compliant display when viewing video material.

Black version is also available.
*4) Supports 3rd-generation and later iPods equipped with a Dock connector. Some functions may not work depending on the generation of the iPod and the version of the software.
New Auto Set-up and Room EQ, featuring MultEQ from Audyssey, for overall listening area support using supplied microphone Room EQ Memory

Page 2

Assignable Room EQ Auto Surround Back Channels ON function, for auto-detection of supporting sources Auto Surround mode The AVR-2807 can automatically store the surround mode for any of three inputs signals: (1) Analog and PCM 2 channel, (2) Bit stream 2-channel (Dolby Digital, DTS) and (3) Bit stream multi-channel.If the type of input signal changes, the most appropriate surround mode is automatically selected for the signal. Audio Delay function (max. 6 frames or 200 msec) The Audio Delay function corrects slight lags between sound and picture that can occur when a video signal is processed,such as in a Progressive Scan DVD player or outboard video processor. 3 User Mode Buttons Night Mode for not disturbing others XM Satellite Radio Ready with optional 'Connect and Play' antenna* *Subscription to XM services also required. 8ch Analog EXT IN terminal
Input/Output Terminals For Every A/V System Audio Inputs 11 Sets Analog Inputs PHONO, CD, (TUNER), DVD, VDP, TV, DBS, VCR-1, VCR-2, CDR/TAPE, V.AUX (FRONT) 1 Set 8-ch Analog EXT. Input FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER 7 Sets Digital Input OPTICAL x 5 (including FRONT x 1) (Assignable) COAXIAL x 2 (Assignable) Audio Outputs 1 Set 8-ch Analog PRE Output FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER 3 Sets Analog REC Output VCR-1, VCR-2, CDR/TAPE 1 Set Analog Multi Zone LINE Output ZONE2 L/R 2 Digital Output OPTICAL x 2 Video Inputs 3 Sets Component Video Input VIDEO-1, VIDEO-2, VIDEO-Sets S-Video Input DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX (FRONT) 7 Sets Composite Input DVD, VDP, TV, DBS, VCR-1,VCR-2, V.AUX (FRONT) Video Outputs 2 Sets Component Video Output MONITOR1, MONITORSets S-Video Output VCR-1, VCR-2, ZONE2, MONITOR 3 Sets Composite Output VCR-1, VCR-2, ZONE2, MONITOR Specifications Power Amplifier Section Rated output *THD figures are power amp stage values. Front 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD) Center 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD) Surround 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD) Surround Back 110 W + 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD) Preamplifier Section Analog Input sensitivity / impedance 200mV/47kohms Frequency response 10Hz-100kHz (+0,-3dB direct mode) S/N 102dB (direct mode) Rated output 1.2V Digital D/A output 2.0V Phono Input sensitivity / impedance 2.5mV RIAA deviation +/-1dB (20Hz to 20kHz) Rated output 150mV Video Section Frequency response Composite video/S-video 5Hz-10MHz (+0,-3dB) Component video 5Hz-100MHz (+0,-3dB) FM Section Tuning frequency range 87.5 - 107.9 MHz Usable sensitivity 1.0 V (11.2 dBf) AM Section Tuning frequency range 520 - 1710 kHz Usable sensitivity 18 V General Power supply AC120V, 60Hz Power consumption 6.0 A (1W max at standby mode) Dimensions 434 (W) x 171 (H) x 429 (D) mm 17.1'' (W) x 6.7'' (H) x 16.9'' (D) Weight 14.0 kg, 30 lbs 14oz

A/B switching between front speakers

Other Functions

RS-232C terminal, for external 3rd party control systems and possible future upgrades Remote IN/OUT ports +12 V Trigger Output x 2 (Assignable) Muting level settings (/-40dB/-20dB) Personal Memory Plus Audio Level Memory, for correcting different signal levels from each input device Volume Level Limiter, for limiting the maximum volume value Power-ON Volume Level Memory On-screen Display Function Rename Setup Lock, for locking the system setup Pre-programmed learning remote controller with GLO-key Detachable AC Power Cord Frequency Synthesis Tuning 56-Station AM/FM Random Preset Memory Tuning Auto Preset Memory
* Design and specifications are subject to change without notice. * "Dolby", "Pro Logic", and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation, * "DTS", "DTS-ES" and "NEO:6" are trademarks of Digital Theater System, Inc. * HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. * "DCDi" is a trademark of Faroudja, a division of Genesis Microchip Inc. * Audyssey MultEQ XT is a trademark of Audyssey Laboratories. MultEQ and the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc. * NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc. * iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Denon Electronics (USA), LLC. 19C Chapin Road, Suite 205 Pine Brook, N.J. 07058-9385 USA TEL: 973-396-0810 usa.denon.com Denon Canada Inc. 505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1 TEL: 905-475-4085 ca.denon.com
Denon Brand Company D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kanagawa 210-8569, Japan www.denon.com