Reviews & Opinions
Independent and trusted. Read before buy Denon AVR-3805!

Denon AVR-3805

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Denon AVR-3805 Home Cinema Amplifier, size: 7.7 MB
Related manuals
Denon AVR-3805 Autre Notice
Denon AVR-3805 Product Brochure
Denon AVR-3805 Install Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Denon AVR-3805Denon AVR 3805 AV receiver - Black

7.1 channel

D.D.S.C.-Digital is a circuit configuration specially designed by DENON in which all elements of the surround processor are optimized through the use of selected high performance discrete components, including separate A/D and D/A converters, with sophisticated DSP surround decoding. New D.D.S.C.-Digital incorporates the latest devices and also DENON LINK digital circuit. For decoding and processing various digital signals with the highest level of accuracy, DENON developed new 32bit floating po... Read more

 

[ Report abuse or wrong photo | Share your Denon AVR-3805 photo ]

Video review

DENON AVR 3806: 7.1 CH/5.1+2 CH Home Theater A ...

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
CarrickMendoza 5:53am on Wednesday, October 20th, 2010 
Faulty unit, very poor Denon customer service Read the reviews of other Denon Products and see how many agree...
vbenner 5:29am on Friday, September 10th, 2010 
a huge step up over the 500 crowd this justifies the extra outlay in stereo and multichannel listening, impossible to upset it. cd, dvd a, sacd, dvd. I use this in 5.0 (i.e no subwoofer) configuration driving Monitor Audio Silver 8i fronts and Silver 10i centre.
Achim 5:54pm on Thursday, June 3rd, 2010 
Paid over $1000 and expected that it will las...  Very nice AV Receiver I own it from 2005 and had to have in Service three times already. gr8 sound quality,ample features,roboust biuld needs solid speakers to shine
Gianluca Bardi 4:28am on Sunday, May 30th, 2010 
I recently decided to upgrade my Technics SA GX910 Dolby Pro Logic with the Denon 3805.
Miket 3:36pm on Monday, May 3rd, 2010 
I recently decided to upgrade my Technics SA GX910 Dolby Pro Logic with the Denon 3805.
IainA42 8:45am on Tuesday, April 6th, 2010 
Why would Amazon sell discontinued products? I bought this receiver a couple of months ago. I am generally satisfied with the quality albeit.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Use of the optional microphone for setup applications measures the presence of speakers, the distance to the speakers, and other information, and permits automatic setup. The characteristics of each speaker can also be corrected. Auto setup requires an optional microphone for setup use.
12.Dual Surround Speaker Mode Provides for the first time the ability to optimize surround sound reproduction using two different types of surround sound speakers as well as two different surround speaker positions: (1) Movie Surround Motion picture soundtracks use the surround channel(s) to provide the ambient elements of the acoustic environment they want the audience to realize. This is best accomplished by the use of specially-designed surround speakers that offer a wide diffusion pattern (bipolar dispersion) or by using surround speakers that provide broad dispersion with a minimum of onaxis localization (dipolar dispersion). Side wall mounting (closer to the ceiling) of the surround speakers provides the greatest envelopment, minimizing localization of direct sound from the speakers. (2) Music Surround With full range discrete surround channels, as well as three discrete full range front channels, digital formats such as Dolby and DTS offer thrilling surround sound music listening. Producers of multi-channel discrete digital music recordings almost always favor the use of direct radiating (monopolar) surround speakers, placed in the rear corners of the room, since that is how they configure their studios during the mixing/creation process. The DENON AVR-3805 provides the ability to connect two different sets of surround speakers, and place them in the appropriate locations in your AV theater room, so that you can enjoy both movie soundtracks and music listening, with optimum results and no compromise. 13.Multi Zone Music Entertainment System Multi Source Function: This units Multi Source function lets you select different audio sources for listening Different sources can thus be enjoyed in the main room (MAIN) and the subroom (ZONE2 and ZONE3) simultaneously.
Connection with a player that supports HDCD playback allows the features of HDCD to be extracted, namely the characteristics of high resolution and low distortion, and fusion with the digital technology that is contained in the AVR-3805 allows for the exhibition of the high sound quality of HDCD.

Turn clockwise to tighten, then insert the banana plug.
Connections When making connections, also refer to the operating instructions of the other components.
Connection jack for subwoofer with built-in amplifier (super woofer), etc.

FRONT SPEAKER SYSTEMS

CENTER SPEAKER SYSTEM
SURROUND SPEAKER SYSTEMS (A)
Precautions when connecting speakers If a speaker is placed near a TV or video monitor, the colors on the screen may be disturbed by the speakers magnetism. If this should happen, move the speaker away to a position where it does not have this effect.
NOTES: To use Surround back with one speaker, connect the speaker to SURR. BACK L CH. The settings must be changed to use this speaker for ZONE2/ZONE3. See page 45.
SURROUND BACK/MULTI ZONE SPEAKER SYSTEMS
SURROUND SPEAKER SYSTEMS (B)

Protector circuit

This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should this occur, please follow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or input cables, and wait for the unit to cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back on. If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center.
Note on speaker impedance
The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance (for example speakers with an impedance of lower than 4 /ohms) are connected. If the protector circuit is activated, the speaker output is cut off. Turn off the sets power, wait for the set to cool down, improve the ventilation around the set, then turn the power back on.

*Speaker Setup Speaker Config.
Display the speaker configuration screen as below.
Set whether speakers are connected or not and, if so, their size parameters. q Select the speaker

*Speaker FrontSp:

Config Large

Center Sp. Front Sp.

w Select the parameter
Subwoofer Surround Sp. A Surround back Sp. Surround Sp. B
ENTER the setting. The Speaker Setup Menu reappears.
NOTE: Select Large or Small not according to the actual size of the speaker but according to the speakers capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting. Parameters Large.Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. Small.Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover Frequency mode is sent to the subwoofer. None.Select this when no speakers are installed. Yes/No.Select Yes when a subwoofer is installed, No when a subwoofer is not installed. 2spkrs/1spkr.Set the number of speakers to be used for the surround back channel. If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when Small is set for the front, center and surround speakers.
2-2 Setting the Delay Time
Input the distance between the listening position and each speakers to set the delay time for the surround playback. The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between the listening position and the speakers (L1 to L5 on the diagram at the right). L1: Distance between center speaker and listening position L2: Distance between front speakers and listening position L3: Distance between surround speakers and listening position L4: Distance between surround back speakers and listening position L5: Distance between subwoofer and listening position

FL Center FR

SL SBL
Select Delay Time at the Speaker Setup Menu.
*Speaker Setup Delay Time
Display the Delay Time screen.

*Delay Meters

Time : Feet
Select the desired unit, meters or feet.
Example: When Feet is selected
Once Meters or Feet is selected in step 3, the Delay Time screen appears automatically.

*Delay FL :

Time 12.0ft
Select the speaker to be set. The picture of the speaker selected blinks.
Set the distance between the center speaker and listening position. The distance changes in units of 0.1 foot (0.03 meters) each time the button is pressed. Select the value closest to the measured distance.

Example: When the distance is set to 12 feet for the center speaker
If Yes is selected for Default, the settings are automatically reset to the default values. Please note that the difference of distance for every speaker should be 20 ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line. When Step is selected, you can select the unit of 1ft (0.1m) or 0.1ft (0.01m).
Enter the setting. The Speaker Setup Menu reappears. The AVR-3805 automatically sets the optimum surround delay time for the listening room.
NOTE: If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 20).
2-3 Setting the Channel Level
Use this setting to adjust so that the playback level between the different channels is equal. From the listening position, listen to the test tones produced from the speakers to adjust the level. The level can also be adjusted directly from the remote control unit. (For details, see page 72.) When both surround speakers A and B are used, their playback levels can be adjusted separately. Select Channel Level at the Speaker Setup Menu.
*Speaker Setup Channel Level
Display the Channel Level screen.
*Channel T.Tone: Level Auto
Select the mode. Select Auto or Manual.
*Channel Level T.Tone: Auto
Auto: Adjust the level while listening to the test tones produced automatically from each speaker. Example: When the Auto mode is selected Manual: Select the speaker from which you want to produce the test tone to adjust the level.
w Select the surround speaker(s) from which you want to produce the test tone (A, B or A+B). Surr. Sp.: A Adjusts the balance of the playback level between the channels when using surround speaker A. Surr. Sp.: B Adjusts the balance of the playback level between the channels when using surround speaker B. Surr. Sp.: A+B Adjusts the balance of the playback level between the channels when using surround speakers A and B at the same time. The Surr. Sp. can only be selected when both surround speakers A and B have been selected at the System Setup Menu (when both A and B have been set to Large or Small).

q Select Surr. Sp.

Select Test Tone Start.
*Channel Level Tone Start:Yes

Select Yes.

a. When the Auto mode is selected: Test tones are automatically emitted from each speaker. The test tones are emitted from each speaker in the following order, at 4-second intervals the first time and second time around, 2second intervals the third time around and on:

Selecting the external input (EXT. IN) mode Press the EXT. IN (on the EXT. IN button on the remote control unit) to switch the external input.
Selecting the AUTO, PCM and DTS modes The mode switches as shown below each time the INPUT MODE button is pressed. AUTO PCM DTS
Note on playing a source encoded with DTS Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode. If so, play in the DTS mode.
Select the play mode. Example: Stereo

Input mode display

Depending on the input signal.

In the AUTO mode

In the DIGITAL PCM mode
(Remote control unit) (Remote control unit) (Main unit)
Start playback on the selected component. For operating instructions, refer to the components manual. Adjust the volume.

MASTER VOLUME

In the DIGITAL DTS mode

In the ANALOG mode

In the EXT.IN mode
The volume level is displayed on the master volume level display.
Input signal display DOLBY DIGITAL
The volume can be adjusted within the range of 80 to 0 to 18 dB, in steps of 0.5 dB. However, when the channel level is set as described on page 34~36 or pages 72 and 73, if the volume for any channel is set at +0.5 dB or greater, the volume cannot be adjusted up to 18 dB. (In this case the maximum volume adjustment range is 18 dB (Maximum value of channel level).) Input mode when playing DTS sources Noise will be output if DTS-compatible CDs or LDs are played in the ANALOG or PCM mode. When playing DTS-compatible sources, be sure to connect the source component to the digital input jacks (OPTICAL/COAXIAL) and set the input mode to DTS.
The DSD indicator lights when the DENON LINK have been connected and the DSD signals have been inputted. (See page 14) Depending on the input signal. The HDCD indicator lights when digital signals are being input with a player that supports HDCD playback.
The DIG. indicator lights when digital signals are being input properly. If the DIG. indicator does not light, check whether the digital input component setup (page 39) and connections are correct and whether the components power is turned on. AL24 processing is activated when PCM signals are played while the surround mode is set to PURE DIRECT, DIRECT, STEREO, MULTI CH DIRECT or MULTI CH IN. NOTE: The DIG. indicator will light when playing CD-ROMs containing data other than audio signals, but no sound will be heard.
Playback using the external input (EXT. IN) jacks
Set the external input (EXT. IN) mode. Press the EXT. IN to switch the external input.

Press the ON button.

Press the ZONE2/3/REC button. The display switches as follows each time the button is pressed. ZONE2 (RECOUT) ZONE3

FUNCTION ZONE2 SOURCE

With ZONE2 SOURCE displayed, turn the FUNCTION knob and select the source you wish to output. The display switches the selected source.
Start playing the source to be output. For operating instructions, refer to the manuals of the respective components. ZONE3 can also be set with a method similar to the above.
NOTES: The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output jacks. Digital signals are not output from the ZONE3, audio (FIXEDOUT) output jacks and ZONE2 audio output jacks. Refer to page 69, 70 about the MULTI ZONE connections.
[2] Remote control unit operations during multi-source playback (selecting the input source) This operation is not possible in the REC OUT mode.
Select ZONE2 using the ZONE2/ZONE3 button.
Press the SOURCE ON button. To turn off the ZONE2 mode, press the ZONE2 SOURCE OFF button.
Press the input source button The ZONE2 source switches directly. The output level of the ZONE2 OUT terminals can be controlled using the VOLUME + and - buttons on the remote control unit. The output level of ZONE2 OUT can be controlled only if ZONE2 vol. level is set Variable at Zone2 Control in System Setup Menu. (see page 45,46)
DEFAULT SETTING (ZONE2 VOLUME LEVEL) : - - - dB (MINIMUM)
When the ZONE2 SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL + and - buttons on the remote control unit.
NOTE: The main zone output can be turn on and off SOURCE ON/OFFbutton (AMP mode)
ZONE 3 can also be set with a method similar to the above.

11 SURROUND

Before playing with the surround function
Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 34~35) or from the remote control unit, as described below. Adjusting with the remote control unit using the test tones is only possible in the Auto mode and only effective in the STANDARD (DOLBY/DTS SURROUND) modes. The adjusted levels for the different modes are automatically stored in the memory.
Press the TEST TONE button.
Test tones are output from the different speakers. Use the channel volume adjust buttons to adjust so that the volume of the test tones is the same for all the speakers.
After completing the adjustment, press the TEST TONE button again.
After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.

AFDM (Auto Flag Detect Mode): ON.This function only works with software on which a special identification signal is recorded. This software is scheduled to go on sale in the future. This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded in DTS-ES or in the normal 5.1-channel mode without using the surround back speakers when the software is not recorded in DTS-ES. OFF.Set the OFF mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the identification signal described below is not recorded.
SB CH OUT: (1) (Multi channel source) OFF.Playback is conducted without using the surround back speaker. NON MTRX.The same signals those of the surround channels are output from the surround back channels. MTRX ON.Surround back channel is reproduced using digital matrix processing. ES MTRX.When playing DTS signals, the surround back signals undergo digital matrix processing for playback. ES DSCRT.When a signal identifying the source as a discrete 6.1-channel source is included in the DTS signals, the surround back
signals included in the source are played.
PL IIx Cinema.Processing is performed with the Cinema mode of the PL IIx decoder and the Surround Back channel is reproduced. PL IIx Music.Processing is performed with the Music mode of the PL IIx decoder and the Surround Back channel is reproduced. (2) (2ch source) OFF..Playback is conducted without using the surround back speaker. ON.Playback is conducted using the surround back speaker. NOTE: This operation can be performed directly using the SURROUND BACK button on the main units panel.
Adjusting the Audio Delay
When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture. The audio delay setting is stored separately for each input source.
Press the SYSTEM SETUP button and display the System Setup Menu.
w Set the input mode to AUTO.

e Select the Dolby/DTS Surround.
Select Advanced Playback at the System Setup Menu.
r Play a program source (DVD, etc.).
Press the ENTER button and display the Advanced Playback Menu.
*Advanced Play Audio Delay

4, 6, 8 3, 5, 7

Select Audio Delay at the Advanced Playback Menu.
Switch to the Audio Delay adjustment screen.
Set the delay time. (0 ms ~ 200 ms)
With a movie source, for example, adjust so that the movement of the actors lips is synchronized with the sound.

4, 6, 8

3, 5, 7
Press the SYSTEM SETUP button to complete the setting.
NOTE: The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (TONE DEFEAT ON).
12 DSP SURROUND SIMULATION
The AVR-3805 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of ten preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound. These surround modes can also be used for program sources not recorded in Dolby Surround Pro Logic, Dolby Digital or DTS.
Surround modes and their features
1 WIDE SCREEN Select this to achieve an atmosphere like that of a movie theater with a large screen. In this mode, all signal sources are played in the 7.1-channel mode, including Dolby Pro Logic and Dolby Digital 5.1-channel sources. Effects simulating the multi surround speakers of movie theaters are added to the surround channels. Select this when watching baseball or soccer programs to achieve a sound as if you were actually at the stadium. This mode provides the longest reverberation signals. Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions. This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz a very vivid realism. Select this for the sound of a concert hall rich in reverberations.

Mode DIRECT / PURE DIRECT MULTI CH DIRECT STEREO EXTERNAL INPUT MULTI CH IN DOLBY PRO LOGIC II DOLBY PRO LOGIC II x DTS NEO:6 DOLBY DIGITAL SURROUND DTS SURROUND 5/7CH STEREO WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTUAL
FRONT L/R C C C C C C C C C C C C C C C C C C C C
CENTER E B E B B B B B B B B B B B B B B B B E
SURROUND SURROUND L/R BACK L/R E B E B B B B B B B B B B B B B B B B E E B E B B B B B B B B B B B B B B B B E
SUBWOOFER B B B B B B B B B B B B B B B B B B B B
C : Signal / Adjustable E : No signal B : Turned on or off by speaker configuration setting
C : Able E : Unable * : Only for 2 ch contents
Signals and adjustability in the different modes Parameter (default values are shown in parentheses) When playing Dolby Digital and DTS signals
Mode DIRECT / PURE DIRECT MULTI CH DIRECT STEREO EXTERNAL INPUT MULTI CH IN PRO LOGIC II DOLBY PRO LOGIC II x DTS NEO:6 DOLBY DIGITAL SURROUND DTS SURROUND 5/7CH STEREO WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTUAL D. COMP C (OFF) E C (OFF) E E C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) C : Able E : Unable LFE C (0dB) C (0dB) C (0dB) E C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) AFDM E E E E E C C C C C E E E E E E E E E E SB CH OUT (MODE) E C E E C C C C C C C C C C C C C C C E TONE CONTROL E E C (0dB) E C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (Note1) C (Note2) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) C (0dB) CINEMA EQ. E E E E E C (OFF) C (OFF) C (OFF) C (OFF) C (OFF) E E E E E E E E E E MODE E E E E E C C C E E E E E E E E E E E E
C : Adjustable E : Not adjustable Note1 : BASS +6 dB, TREBLE 0 dB Note2 : BASS +6 dB, TREBLE 4 dB
Signals and adjustability in the different modes
SURROUND PARAMETER PRO LOGIC II / II x ONLY Mode DIRECT / PURE DIRECT MULTI CH DIRECT STEREO EXTERNAL INPUT MULTI CH IN PRO LOGIC II DOLBY PRO LOGIC II x DTS NEO:6 DOLBY DIGITAL SURROUND DTS SURROUND 5/7CH STEREO WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTUAL ROOM SIZE E E E E E E E E E E E E C (Medium) C (Medium) C (Medium) C (Medium) C (Medium) C (Medium) E E C : Adjustable E : Not adjustable EFFECT ON/OFF E E E E E E E E E E E C (ON) E E E E E E E E EFFECT LEVEL E E E E E E E E E E E C (10) C (10) C (10) C (10) C (10) C (10) C (10) E E DELAY TIME E E E E E E E E E E E E E E E E E E C (30ms) E SUBWOOFER ON/OFF C (OFF) E E E E E E E E E E E E E E E E E E E PANORAMA E E E E E C (OFF) C (OFF) E E E E E E E E E E E E E DIMENSION E E E E E C (3) C (3) E E E E E E E E E E E E E CENTER WIDTH E E E E E C (3) C (3) E E E E E E E E E E E E E NEO:6 MUSIC CENTER IMAGE E E E E E E E C (0.3) E E E E E E E E E E E E EXT.IN SW ATT E E E C E E E E E E E E E E E E E E E E

17 ADDITIONAL INFORMATION
Optimum surround sound for different sources
There are currently various types of multi-channel signals (signals or formats with more than two channels).
2 Types of multi-channel signals
Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPEG multichannel audio, etc. Source here does not refer to the type of signal (format) but the recorded content. Sources can be divided into two major categories.

2 Types of sources

Movie audio
Signals created to be played in movie theaters. In general sound is recorded to be played in movie theaters equipped with multiple surround speakers, regardless of the format (Dolby Digital, DTS, etc.).
Movie theater sound field

FL SW C FR

Listening room sound field SR
In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels. To do so, in some cases the number of surround speakers is increased (to four or eight) or speakers with bipolar or dipolar properties are used. SL: Surround L channel SR: Surround R channel SB: Surround back channel
SB Multiple surround speakers (For 6.1-channel system)
Other types of audio These signals are designed to recreate a 360 sound field using three to five speakers.
In this case the speakers should surround the listener from all sides to create a uniform sound field from 360. Ideally the surround speakers should function as point sound sources in the same way as the front speakers.
These two types of sources thus have different properties, and different speaker settings, particularly for the surround speakers, are required in order to achieve the ideal sound. The AVR-3805 is equipped the function of surround speakers selection that makes it possible to change the settings according to the combination of surround speakers being used and the surrounding environment in order to achieve the ideal surround sound for all sources. This means that you can connect a pair of bipolar or dipolar surround speakers (mounted on either side of the prime listening position), as well as a separate pair of direct radiating (monopolar) speakers placed at the rear corners of the listening room.

Surround speakers A Surround back speaker Front speaker to 90 cm

Point slightly downwards

Surround back speakers (A) Surround speakers B As seen from the side As seen from above

Surround speakers B

2. When not using surround back speakers

Monitor Subwoofer 60

Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible. Set the center speaker between the front left and right speakers and no further from the listening position than the front speakers. Consult the owners manual for your subwoofer for advice on placing the subwoofer within the listening room. If the surround speakers are direct-radiating (monopolar) then place them slightly behind and at an angle to the listening position and parallel to the walls at a position 60 to 90 centimeters (2 to 3 feet) above ear level at the prime listening position. Connect the surround speakers to the surround speaker A jacks on the AVR-3805 and set all settings on the setup menu to A. (This is the factory default setting. For details, see page 38.)
Surround speaker Front speaker

60 to 90 cm

As seen from the side
120 Surround speakers As seen from above
The AVR-3805 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to 5.1 channels - front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects (the Low Frequency Effects LFE channel, also called the.1 channel, containing bass frequencies of up to 120 Hz). Unlike the analog Dolby Pro Logic format, Dolby Digitals main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.
2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems No. recorded channels (elements) No. playback channels Playback channels (max.) Audio processing Dolby Digital 5.1 ch 5.1 ch L, R, C, SL, SR, SW Digital discrete processing Dolby Digital encoding/decoding Dolby Pro Logic 2 ch 4 ch L, R, C, S (SW - recommended) Analog matrix processing Dolby Surround

Sources recorded in Dolby Surround These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology. Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and Video cassettes to be played on stereo VCRs, as well as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV. Decoding these signals with Dolby Pro Logic II makes it possible to achieve multi-channel surround playback. The signals can also be played on ordinary stereo equipment, in which case they provide normal stereo sound. There are two types of DVD Dolby surround recording signals. q 2-channel PCM stereo signals w 2-channel Dolby Digital signals When either of these signals is input to the AVR-3805, the surround mode is automatically set to Dolby Pro Logic II when the DOLBY/DTS SURROUND mode is selected.
Sources recorded in Dolby Surround are indicated with the logo mark shown below. Dolby Surround support mark:
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

DTS Digital Surround

Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems. DTS offers the same 5.1 playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well as the stereo 2-channel mode. The signals for the different channels are fully independent, eliminating the risk of deterioration of sound quality due to interference between signals, crosstalk, etc. DTS features a relatively higher bit rate as compared to Dolby Digital (1234 kbps for CDs and LDs, 1536 kbps for DVDs) so it operates with a relatively low compression rate. Because of this the amount of data is great, and when DTS playback is used in movie theaters, a separate CDROM synchronized with the film is played. With LDs and DVDs, there is of course no need for an extra disc; the pictures and sound can be recorded simultaneously on the same disc, so the discs can be handled in the same way as discs with other formats. There are also music CDs recorded in DTS. These CDs include 5.1-channel surround signals (compared to two channels on current CDs). They do not include picture data, but they offer surround playback on CD players that are equipped with digital outputs (PCM type digital output required). DTS surround track playback offers the same intricate, grand sound as in a movie theater, right in your own listening room.

Digital input: Phono equalizer (PHONO input REC OUT) Input sensitivity: 2.5 mV RIAA deviation: 1 dB (20 Hz to 20 kHz) Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 8 V Distortion factor: 0.03% (1 kHz, 3 V) Video section Standard video jacks Input / output level and impedance: 1 Vp-p, 75 /ohms Frequency response: 5 Hz ~ 10 MHz +0, 3 dB S-video jacks Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms C (color) signal 0.286 Vp-p, 75 /ohms Frequency response: 5 Hz ~ 10 MHz +0, 3 dB Color component video jacks Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms PB/CB signal 0.7 Vp-p, 75 /ohms PR/CR signal 0.7Vp-p, 75 /ohms Frequency response: DC ~ 100 MHz +0, 3 dB Tuner section [FM] (note: V at 75 /ohms, 0 dBf=1 x 1015 W) [AM] Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 V (11.2 dBf) 18 V 50 dB Quieting Sensitivity: MONO 1.6 V (15.3 dBf) STEREO 23 V (38.5 dBf) S/N (IHF-A): MONO 77 dB STEREO 72 dB Total Harmonic Distortion (at 1 kHz): MONO 0.15% STEREO 0.3% General Power supply: AC 120 V, 60 Hz Power consumption: 7.1 A 1 W Max (Standby) Maximum external dimensions: 434 (W) x 171 (H) x 429 (D) mm (17-3/32 x 6-47/64 x 16-57/64) Mass: 17 kg (37 lbs 8 oz) Remote control unit (RC-969) Batteries: R03/AAA Type (four batteries) External dimensions: 72 (W) x 238 (H) x 25.5 (D) mm (2-53/64 x 9-3/8 x 1-0) Mass: 225 g (Approx. 8 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.

MEMO :

16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321

Printed in Japan 003

doc1

M O D E L

I N F O R M A T I O N

AVR-3805
Latest DSP technology employed in DENON's critically acclaimed D.D.S.C-Digital circuitry for the finest in multi-channel audio performance
D.D.S.C-Digital (Dynamic Discrete Surround Circuit) is a circuit configuration designed by DENON in which all elements of the Surround Processor are optimized to the highest standards by the use of selected high performance and discrete components, particularly the A/D and D/A converters and the sophisticated DSP surround decoder. DENON has developed with Analog Devices, a new 32-bit Floating Point DSP processor for decoding and processing the various digital signals with the highest level of accuracy, so this new D.D.S.C-Digital circuit will provide the ultimate in multi-channel performance.

A/V Surround Receiver

The AVR-3805 incorporates DENON LINK 3rd Edition*, this new edition now allows the input of uncompressed Super Audio CD digital signals as well as DVD-Video/Audio. To transfer high resolution, multi-channel digital audio signals, DENON has developed a unique digital transmission technology, known as DENON LINK. This digitally balanced transfer technology permits jitter-less data transfer and ultra-low noise. The AVR-3805 incorporates this latest digital audio interface, so the end user will experience the absolute finest in audio playback between the AVR-3805 and a DENON LINK featured DVD player.
*The 3rd Edition for DVD/Super Audio CD output for DVD players is currently awaiting verification.
DENON LINK multi channel digital audio input
New EL Backlight Touch Panel Remote
The AVR-3805's remote controller is a completely new design, focusing heavily on ease of use. It features Electro-Luminescence technology which offers sophisticated design and extraordinary control. This remote will automatically activate the backlighting when the user picks the remote up.
Component Video Conversion
High-grade Up Conversion This video transcoding technology lets you enjoy highest picture quality from all video gear connected to the AVR-3805. Since composite and S-video signals are converted up to component video signals and output to the monitor, all you need to do is connect a monitor that can display component video images. 3 Sets of Component Video Inputs The AVR-3805 is equipped with 3 sets of assignable, component video inputs and 1set of monitor outputs (all RCA terminals) High Definition Quality Video Switching The high-performance relay that is used to switch component video signals, features an extended bandwidth range up to 100 MHz. Auto Setup and Room EQ Function with Optional Microphone The AVR-3805 is equipped with an Auto Setup and Room Equalization function, to achieve the most ideal sound field for your room. With the optional microphone placed at your listening position, the powerful new 32bit floating point DSP automatically and accurately analyzes, adjusts and sets the speaker configurations of your system. Also, the AVR-3805 analyzes and adjusts the frequency response of the speakers to the room with an 8 band parametric equalizer. The optional microphone (DM-S305) is a specially designed, high performance unit with a heavy duty base to suppress vibrations for accurate analyzing. Pure Direct and AL24 Processing Plus DENON's Pure Direct mode was designed for those who want the ultimate in sonic quality from their audio sources. Depending on input signal type, Pure Direct will turn off any unneeded circuitry of the AVR-3805. When listening to PCM based sources, DENON's waveform technology AL24 Processing Plus brings out all the delicate nuances of the source material.

DVD Player Commands

AVR Commands
Fully Discrete, Equal Power Seven Amplifier Channels, 120 Watts Each
Front Center Surround Surround back

120 W + 120 W 120 W 120 W + 120 W 120 W + 120 W
(8 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD)
The AVR-3805 features an equal power 7-channel amplifier section, with identical amplifier design featuring high current discrete output devices on all 7 channels. Each of the 7 amplifier channels is rated at 120 watts, into 8 ohms, from 20 Hz - 20 kHz with no more than 0.05% THD.
Designed for high sound quality
Hefty Power Transformer for Stable Supply of Power A huge power transformer has been connected in the power section where it is combined with a rectifier diode and an oversized block capacitor to ensure a large, stable supply of electrical current. Accordingly, this design allows the AVR-3805 to achieve high output power of 120 W for each of the 7 channels.
Block Capacitor A large-capacity block capacitor was developed for the AVR-3805 to ensure a rock stable supply of power. Detachable AC Power Cord
Frequency Synthesis Tuning 56-Station AM/FM Random Preset Memory Tuning Auto Preset Memory
Support for Multi Zone Configurations
The AVR-3805 provides a Multi Zone Output function and a Select function that let you output different sources to multiple zones. Sources can be selected for output to an additional zones, in addition to the main room. Multi-room Zone 2 can have variable pre-amp output along with a composite video feed. And an independently selected audio source can be output to Multi-room Zone 3 with a fixed pre-amp output. The AVR-3805's Power Amplifier Assign function lets you assign the 2 Surround Back (SB L/R) amplifier channels when the system is not configured for 7.1, to instead drive the Multi-room Zone 2, or 3, speakers, with 120 Watts per channel output power, while still providing 5 discrete amplifier channels to drive all speakers in a 5.1 configured home theater room. +12 V Trigger Output x2 (Assignable) Remote In/Out Ports RS232C Control Port to support an AMX, Crestron integrated control system Surround Sound Produced at the Dubbing Stage. DTS 96/24 Decoding for DVD-Video DTS-ES Discrete 6.1 and Matrix 6.1 DTS NEO:6 Dolby Digital EX Dolby Pro Logic IIx Auto Surround The AVR-3805 can automatically store the surround mode for any of four inputs signals: (1) Analog and PCM 2 channel, (2) Bit stream 2-channel (Dolby Digital, DTS) and (3) Bit stream multi-channel and (4) DENON LINK multichannel. If the type of input signal changes, the most appropriate surround mode is automatically selected for the signal.

Other Features That Enhance Operating Ease DENON's Latest Surround Technology Faithfully Recreates the
Input/Output Terminals For Every A/V System

Audio Inputs

11 Analog Input.. PHONO, CD, (Tuner), DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX(FRONT), CDR/TAPE 8-ch Analog EXT. Input. FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER 5 Digital (Optical) Input.. OPTICAL x 5 (FRONT x 1) (Assignable) 2 Digital (Coaxial) Input. COAXIAL x 2 (Assignable) 1 Denon Link.. Denon Link (Assignable) Audio Outputs 8 Analog PRE Output.. FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER 3 Analog REC Output. VCR-1, VCR-2, CDR/TAPE 1 Analog Multi Zone PRE Output. ZONE 2 L/R 1 Analog Multi Zone Output.. ZONE 3 L/R 2 Digital (Optical) Output. OPTICAL x 2 Video Inputs 3 Component Video Input. VIDEO-1, VIDEO-2, VIDEO-Composite Input. DVD, VDP, TV, DBS, VCR1, VCR2, V.AUX(FRONT) 7 S-Video Input.. DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX(FRONT) Video Outputs 1 Component Video Output.. MONITOR 3 Composite Output.. VCR-1, VCR-2, MONITOR 3 S-Video Output. VCR-1, VCR-2, MONITOR 1 Multi Zone Composite Video output.. ZONE 2 VIDEO x1 Specifications Power Amplifier Section Rated output *THD figures are power amp stage values. Front.. 120 W + 120 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 160 W + 160 W (6 ohms, 1 kHz, 0.7 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) Center.. 120 W 160 W (6 ohms, 1 kHz, 0.7 % THD) Surround.. 120 W + 120 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 160 W + 160 W (6 ohms, 1 kHz, 0.7 % THD) Surround back. 120 W + 120 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 160 W + 160 W (6 ohms, 1 kHz, 0.7 % THD) Preamplifier Section Input sensitivity/impedance PHONO(MM).. 2.5 mV/47 kohms CD, DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX, CDR/TAPE.. 200 mV/47 kohms FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER. 200 mV/15 kohms Output level/Load impedance FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUB WOOFER MULTI ZONE L/R. 1.2 V/10 kohms VCR-1, VCR-2, CDR/TAPE. 200 mV/47 kohms Frequency response.. 10 Hz - 100 kHz; +0, -3 dB Signal-to-noise ratio.. 102 dB RIAA deviation. 1 dB (20 Hz - 20 kHz) Tone control.. Treble: 6 dB, Bass: 6 dB FM Section Tuning frequency range.. 87.5 - 107.9 MHz Usable sensitivity.. 1.0 V (11.2 dBf) AM Section Tuning frequency range.. 520 - 1710 kHz Usable sensitivity.. 18 V General Power supply.. AC 120 V, 60 Hz Power consumption.. 7.1 A Dimensions. 434 (W) x 171 (H) x 429 (D) mm 17.1 (W) x 6.7 (H) x 16.9 (D) Weight.. 17.0 kg, 37 lbs 8 oz

1 Set of 8-Channel External Analog Inputs New Front Panel Design with Trap Door Larger display area is now capable of displaying a broad range of information including character icons for an intuitive recognition of input signal channels and output speaker channels. All settings can now be made using the controls on the main unit.
Audio Delay Function The Audio Delay function corrects slight lags between sound and picture that can occur when a video signal is processed, such as in a Progressive Scan DVD player or outboard video processor. Variable Gain Volume S/N in the useable area has been improved. Finer adjustments are also possible in 0.5 dB steps across the extended range of 80 dB to +18 dB. Adjustable Cross-Over Switching The AVR-3805 supports subwoofer cross-over switching with a choice of 8 cross-over frequencies: 40, 60, 80, 100, 120, 150, 200 and 250 Hz. This lets you more accurately match the performance characteristics of the subwoofer to the main speaker system. A/B switching between surround speakers
*Black version is available.
*Design and specifications are subject to change without notice. *Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories. *DTS, DTS-ES Extended Surround and Neo:6 are trademarks of Digital Theater System, Inc. *HDCD, High Definition Compatible Digital and Microsoft are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
DENON ELECTRONICS (USA), LLC. 19 CHAPIN ROAD,BLDG#C, PINE BROOK, NJ 07058-9777 USA TEL: 973-396-0810 www.usa.denon.com DENON CANADA INC. 505 APPLE CREEK BLVD. UNIT 5 MARKHAM, ONTARIO L3R 5B1 CANADA TEL: 905-475-4085 www.denon.ca
DENON, LTD. 3-16-11 YUSHIMA, BUNKYO-KU, TOKYO 113-0034 JAPAN

13440204 A

 

Technical specifications

Full description

D.D.S.C.-Digital is a circuit configuration specially designed by DENON in which all elements of the surround processor are optimized through the use of selected high performance discrete components, including separate A/D and D/A converters, with sophisticated DSP surround decoding. New D.D.S.C.-Digital incorporates the latest devices and also DENON LINK digital circuit. For decoding and processing various digital signals with the highest level of accuracy, DENON developed new 32bit floating point DSP for the AVR-3805, so this new D.D.S.C-Digital circuit provide the ultimate in multi-channel performance. DENON LINK has just been upgraded to the 3rd edition. The new edition now allows the input of Super Audio CD digital signals as well as DVD-Video/Audio. To transfer audio signals, DENON has developed a unique digital transmission technology, known as DENON LINK. This digitally balanced transfer technology permits jitter-less data transfer and low noise. The AVR-3805 incorporates this latest digital audio interface, so the end user will experience absolute finest in audio playback between AVR-3805 and DENON LINK featured DVD player. This video transcoding to component signals, letting you enjoy high picture quality from all video gear connected to the AVR-3805. Since composite and S-video signals are also converted into component video signals and output to the monitor, all you need to do is connect a monitor that can display component video images. The AVR-3805 is equipped with auto set up and room equalizing capability to achieve the ideal sound field for your room. With the microphone placed on your listening position, the powerful new 32bit floating point DSP analyzes accurately and automatically adjusts and sets the speaker configurations for your listening room. Also AVR-3805 analyzes the frequency response with 8 band parametric equalizer and adjust to optimum sound field. The microphone is equipped high performance microphone unit and heavy duty base to suppress the vibration for accurate analyzing. Pure direct function is designed for audiophiles to enjoy the audio sources. This function turns off the video circuit and FL display and also digital circuit while the analog playback. While you playback PCM source, DENON's waveform technology AL24 plus processing is worked and bring out all the delicate nuances of the music. The AVR-3805's remote controller is completely new designed for easy to use. It is featured EL technology, and it gives you a sophisticated design and control. The AVR-3805 features an equal power 7-channel amplifier section, with identical amplifier design on all 7 channels, with high current discrete output devices on all channels. Each of the 7 amplifier channels is rated at 120 watts, into 8 ohms, from 20 Hz - 20 kHz with no more than 0.05% THD. A huge power transformer has been connected in the power section where it is combined with a rectifier diode and a large block capacitor to ensure a large, stable supply of electrical current. Accordingly, the AVR-3805 boasts high output power of 120 W for each of the 7 channels. A large-capacity block capacitor was developed for the AVR-3805 to ensure a rock stable supply of power. The AVR-3805 provides a Multi Zone Output function and a Select function that let you output different sources to multiple zones. Sources can be selected for output to an additional zone, in addition to the main room. Multi-room Zone 2 can have variable pre-amp output along with composite video feed. And an independently selected source can be output to Multiroom Zone 3 as a fixed output. The AVR-3805's Power Amplifier Assign function lets you assign the 2 or 3 Surround Back (SB L/R) amplifier channels when the system is not configured for 7.1, to instead drive the Multi-room Zone 2 speakers, with 120 Watts per channel output power, while still providing 5 discrete amplifier channels to drive all speakers in a 5.1 configured home theater room.

General
Product TypeAV receiver
Width17.1 in
Depth16.9 in
Height6.7 in
Weight37.5 lbs
Enclosure ColorBlack
Audio System
Built-in DecodersDolby Pro Logic II, Dolby Digital Surround EX, DTS Neo:6, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS 96/24, DTS decoder, Dolby Pro Logic IIx
Audio D/A Converter24bit / 192kHz
EqualizerYes
Digital Sound Processor (DSP)Yes
DSP PresetsJazz club, Matrix, Wide screen, Classic Concert, Mono Movie, Rock Arena, Virtual Surround, Video Game, Super Stadium, 5/7 Channel Stereo
Surround System Class7.1 channel
Response Bandwidth10 - 100000 Hz
Signal-To-Noise Ratio102 dB
Output Power / Total770 Watt
Input Impedance47 kOhm
Input Sensitivity200 mV
Amplifier Output Details120 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.05% - 2 channel(s) ( front ) 120 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.05% - 1 channel(s) ( center ) 120 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.05% - 2 channel(s) ( surround ) 120 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.05% - 2 channel(s) ( surround back ) 160 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( front ) 160 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 1 channel(s) ( center ) 160 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( surround ) 160 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 2 channel(s) ( surround back )
Bass ControlYes
Treble ControlYes
Built-in DisplayFluorescent
Additional FeaturesDigital signal format auto detection / auto switching, on-screen display, Super Audio CD compatible, multi-room audio output, A/B/A+B speaker switch, pink noise generator, source direct, Auto Setup / Room EQ
Signal Processing Features
Video Conversion/ScalingComposite video to S-Video conversion, composite video to component video conversion, S-Video to component video conversion
Connectors
Headphone JackYes
Coaxial Digital InputYes
Optical Digital InputYes
Optical Digital OutputYes
Equalizer
Equalizer TypeDigital graphic
Equalizer Band Qty8 bands
Equalizer Center Frequencies63 Hz, 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 2000 Hz, 4000 Hz, 8000 Hz
Radio
TypeRadio tuner - AM/FM - digital
Tuning DisplayFluorescent display
Preset Station Qty56 preset stations
Antenna Form FactorLoop AM / wire FM
Signal-To-Noise Ratio77 dB
Total Harmonic DistortionMono: 0.15%, stereo: 0.3%
Auto Preset MemoryYes
Remote Control
TypeUniversal remote control - infrared
Supported DevicesLD player, MD recorder, CD recorder, TV, VCR, satellite TV system, cassette deck, DVD player, CD player
FeaturesLCD backlight, LCD display, touch panel, learning, multi-brand compatibility
Connections
Connector Type1 x headphones ( phone stereo 6.3 mm ) - front 1 x composite video/audio input ( RCA phono x 3 ) - front 1 x S-Video input ( 4 pin mini-DIN ) - front 1 x SPDIF input ( TOSLINK ) - front 1 x 7.1 channel audio line-in ( RCA phono x 8 ) - rear 1 x 7.1 channel audio line-out ( RCA phono x 8 ) - rear 2 x SPDIF input ( RCA phono ) - rear 3 x SPDIF input ( TOSLINK ) - rear 2 x SPDIF output ( TOSLINK ) - rear 2 x trigger ( mini-phone 3.5 mm ) - rear 1 x remote control ( mini-phone 3.5 mm ) - rear 2 x audio line-out (multi zone) ( RCA phono x 2 ) - rear 1 x monitor output ( 4 pin mini-DIN ) - rear 1 x monitor output ( RCA phono ) - rear 3 x component video input ( RCA phono x 3 ) - rear 1 x component video output ( RCA phono x 3 ) - rear 1 x composite video output (multi zone) ( RCA phono ) - rear 1 x turntable audio input ( RCA phono x 2 ) - rear 2 x audio line-in ( RCA phono x 2 ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 6 x composite video/audio input ( RCA phono x 3 ) - rear 2 x composite video/audio output ( RCA phono x 3 ) - rear 6 x S-Video input ( 4 pin mini-DIN ) - rear 2 x S-Video output ( 4 pin mini-DIN ) - rear 9 x speakers output ( banana/spade x 2 ) - rear 1 x serial ( 9 pin D-Sub ) - rear 1 x DENON LINK - rear
Miscellaneous
Included AccessoriesAM antenna, FM antenna
Power
Power DevicePower supply - internal
Power Outlets2 AC outlets
Universal Product Identifiers
BrandDenon
Part NumbersAVR-3805, AVR-3805BK
GTIN00081757505987, 00081757505994

 

Tags

Philips 755 C28W440N Quantum 9920 RX-V596RDS MYV-76 Price SM1960 Gpsmap60CSX ICD-SX40 Nikkor P1270 Palm Zire Decker 200 KDC-MP6090R MX9000 PEG-T665C PN42A400c2D LCM1042TV Toolbox HBH-DS970 DMC 1E 300 RC Mindprint Trio 29 L Hdmi Binatone Zest VPC-X1420 PRO 412 Composio RTS PCS-TL50 Aingel 3201 Black Casio 3206 RL33sbms KDC-MP532U Playstation 3 CM100 UN22C4000PD SMS-2P CT-S530 Coupe VSX-D811s-K CAW-canun1 TX-SV343 SLV-N50 Mypal A716 AV-32WFX1eu-av-32wfx1 DB356MP A-502R GR-B207dxza Phone SA-HT670 DP351-N Dell 1700 GM-X574 Receiver IP1000 SC-PM41 82333 WD-65638 AT3235 EL-327S DEH-2920MP AL140 SA-VE155 ERB3500X Edition EL-738 TX-32PG50 42LB1DR Specifications BDP-83 XVS125-2004 Katalyx Adapter Workstation Remote Xwnav1-K Veriton M461 F-250 Taxi 2 HAP 220 Ameriphone JV35 BAR933HG KD-G311 Intuos2 L U VR330 6260VF W7610 Wintv-PVR For Sale LX3000D-22S NP-X1 LE26A450c2 JH1-JH3 T5720 Review Officejet D145 SGH-E530 AU-999 DPX-440 FEC-11D Plus 9 8A3 Canon DC19 BD-P1620 50-2005 SE255

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101