Denon AVR-4308 A
Denon AVR 4308CI AV network receiver7.1 channel
The AVR-4308CI is taking surround receivers to the next level. In addition to many of the standard features you have come to enjoy from Denon receivers, custom integration capabilities to home networks and A/V systems has been expanded making this surround receiver the true heart of any high end home theater networked or non-networked. The AVR-4308CI also brings with it the new surround formats that HD has to offer, making the home A/V theater experience like none you have seen or heard before. ... Read more [ Report abuse or wrong photo | Share your Denon AVR-4308 A photo ]
Manual
Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Download
(French)Denon AVR-4308 A Home Cinema Amplifier, size: 12.0 MB |
Denon AVR-4308 A
Video review
Denon AVR 4308 HD Receiver Video Review
User reviews and opinions
| Funk |
1:43pm on Sunday, July 4th, 2010  |
| Immersive sound quality, great hdmi handling, amazing stereo hifi performance as well as the superb True HD Dolby and PCM for films. | |
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Documents
AVR-4308CI / 3808CI Firmware Update Instructions
Table of Contents
1. Before Updating - Requirements --------------------------------------------P1 - Recommendations -------------------------------------- P1 - Key Notes on Network Environment Configuraitons - P1 - About System Setup Memory --------------------------P1 - Check Your Firmware Version -------------------------- P2 -------------------------------------------------- P3 ---------------------------------------- P4 ---------------------------------------- P5 - P7 ---------------------------------------- P8
2. Reinitialize
3. Basic Operations 4. Firmware Update 5. Trouble Shooting
6. Getting Upgrade ID # --------------------------------------- P9
10/1/2008
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA TEL: 201-762-6500 usa.denon.com
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan
1. Before Updating
Requirements
- Broadband Internet Access - Cable/DSL Modem - Network Router or Hub
AVR-4308CI AVR-3808CI
- Proper configuration of the Denon A/V component to work on a particular Network Environment - Ethernet Straight Cable for Direct connection to the Network Environment
Recommentations
- If you did not install, or configure, the Denon A/V Component with your Network Environment, please contact your Network Installer/Integrator to assist. - If connecting the Denon A/V Component to your Network Environment for the first time, please read the following sections in the Instruction Manual provided with your component.
Network Audio : AVR-3808/4308CI Instruction Manual, page 20 Network Setup : AVR-3808CI Instruction Manual, page 32, AVR-4308CI Instruction Manual, pages 32-34 Denon does not recommend using Wi-Fi network connectivity when updating/upgrading the components. This is due to the higher possibility of errors in the update/upgrade process from decreased, and/or drop outs of Wi-Fi signals as well as interruption from other nearby Wi-Fi, or other Radio Frequency generating devices.
- Connect the Denon A/V Component directly to your Network Environment via an Ethernet Straight Cable.
- Once the Denon A/V Component is connected and configured properly to your Network Environment, please test that you can receive and listen to Internet Radio stations on the Net//USB input.
This will show you have, at a minimum, a good Internet connection to the component.
Be sure not to 'Power Off' the unit during the update/upgrade process as this will cause a failure in the process.
If this does occur and the unit will not respond normally, please contact Denon USA Customer Service at 1-800-497-8921.
Key Notes on Network Environment Configurations
- Denon A/V Components are not compatible with PPPoE (Point to Point Protocol over Ethernet).
Contact you Internet Service Provider (ISP) to assist in procuring a PPPoE Router.
- Denon A/V Components are not UPnP (Universal Plug and Play) compliant.
This could be an issue with some routers on the market (we have seen this on some NetGear products). You can disable UPnP in the routers setup configuration, however changing this setting can affect the normal operation of other devices on your Network. Contact your Router manufacturer for assistance.
- Some Firewall settings in your network router may not permit the Updating/Upgrading functionality of Denon A/V Components. Contact your Router manufacturer for assistance. - Be sure to disable "VPN" on any PC on your network environment. Company or office network connections will cause a failure in the process.
About System Setup Memory
- The Update Firmware will not reset the system setup configurations of your Denon A/V component.
Note that after downloading and installing the Upgrade Feature Pack (from October 1st, 2008), you will need to recalibrate your system using the Audyssey Room EQ in the component. This is required for you to get the best level of performance from the newly added Audyssey features of Dynamic Volume and Dynamic EQ.
Page 1
Check Your Firmware Version
- Press and hold "Status" key and "Return" key, and push "Power Switch" on - Press "Status" key twice, and front display will show "Main XX.XX" version information
Front Display
Power Switch Return Status
- Find your Main Processor version from list below, and go to next step Model AVR-3808CI Main Version Release Month Notes 01.95 01.73 01.69 01.68 01.57 01.28 01.03 Sep, 2008 Jul. 2008 Apr. 2008 Feb. 2008 Nov. 2007 Oct. 2007 Jul. 2007 Need Initialize first, and update Need Update Not necessary update
Page 9
- Getting Upgrade ID #
Page 5-9
- Firmware Update - Getting Upgrade ID #
Page 3-9
- Re-Initialize - Firmware Update - Getting Upgrade ID #
AVR-4308CI
01.95 01.72 01.69 01.57 01.28 AA.44
Sep. 2008 Jul. 2008 Feb. 2008 Nov. 2007 Sep. 2007 Jul. 2007
Not necessary update
Need Update
Need Initialize first, and update
Page 2
2. Re-Initialize
NOTICE
- Re-Initialize BEFORE Update is required only for the following customers AVR-3808CI Main Ver 01.03 AVR-4308CI Main Ver AA.44 - Note re-initialization will erase and reset the component to factory settings - After completion of the update, you will need to redo system settings
Initializing BEFORE Update
- Press and hold "Cursor UP" key and "Cursor DOWN" key, and push "Power Switch" on - Front display will show all indications, and Initialize will complete
Power Switch
Cursor Down
Cursor Up
> Go to Next Page
Page 3
3. Basic Operations
Basic Operations
Menu Icon
Highlight Cursor
Selectable Item
Text guidance
On-Screen Interactive Display
A/V Receiver (shown 4308CI)
'MENU Key' : Show On-Screen Interactive Display 'ENTER Key' : Select 'Cursor Keys' : Move Highlight Cursor
NOTE: Be sure 'AMP key' is flashing, and that the
Front Panel
Remote Control
remote is in "Main Zone" mode, see the following instruction manual section "Remote ControlUnit Operations". AVR-4308CI : page 61 AVR-3808CI : page 59
Page 4
4. Firmware Update (1/3)
(1) Select "Manual Setup"
- Press the Menu key on the remote control or on the Front Panel of the AVR. - Pressing the Down Cursor key, highlight the icon (shown as a pair of pliers, a screwdriver and a wrench) for Manual Setup - Press the Right Cursor key to enter Manual Setup
Front Panel Display
(2) Select "Option Setup"
- Pressing the Down Cursor key, highlight the icon (shown as a briefcase) for Option Setup - Press the Right Cursor key to enter Option Setup
(3) Select "Firmware Update"
- Pressing the Down Cursor key, highlight Firmware Update
Page 5
4. Firmware Update (2/3)
(4) Select "Check for Update"
- Press the Right Cursor key to highlight Check for Update - Press the 'Enter' key to start the "Check for Update"
(5) Checking for Available Firmware
(6) Available Firmware Information
- Press the Enter key to Execute the Update Process
Page 6
4. Firmware Update (3/3)
(7) Confirming to Run Update
- With the "Yes" button highlighted, press the 'Enter' key to execute the update. - If you do not wish to proceed with the update, press the 'Right Cursor' key to highlight the "No" button, then press the 'Enter' key to exit the update procedure.
(8) Start Update / In Progress
- On Screen Interface will show message "Please Wait", and the unit goes into update mode. (On Screen Interface goes off) - The 'Standby' power indicator will go "Red" and the On Screen Interface will turn off. - Update process information can be seen
on the Front Panel Display.
Power indicator will go RED
(9) Update Complete
- Unit will automatically complete process and repower itself 'On'. - The "Standby Power" indicator will turn
"Green".
Power indicator will go Green
Page 7
5. Trouble Shooting
Indication of FL Display Download failed Updating failed Login failed Connection failed Server is busy Regist failed
Update Error Messages and Trouble Shooting Tips
Reason for Failure Countermeasure Update is imperfect or fails Please turn Main power off, then on again, confirm procedure, and perform update again Internet Connection failure Confirm the unit is correctly connected to the Internet. Server is busy Try to update at a later time Failure to Register with the Please turn Main power off, then on again, confirm Server procedure, and perform update again
Support
If you have problem for updating, please contact Denon USA Customer Service
Customer Service hours of operation: 9:00 AM to 5:00 PM ET, M-F
1-800-497-8921
During peak call-in times or for after hours Tech and Operational self help support, please use our online FAQ database.
http://denon.custhelp.com/
Page 8
6. Getting Upgrade ID #
Important Notice
- The "Upgrade ID" number is required for the Upgrade Feature Pack registration. - When registering your Denon A/V Component for the Upgrade Feature Pack online, via the Denon USA web site (www.usa.denon.com), you will need the "Upgrade ID" number which was created by the firmware update released Sep. 2008.
> See Page 2 Check Your Firmware Version
- If you have not performed a firmware update since before that date, you must do so before proceeding further.
> See Page 5 - 7 Update Instructions
Getting Upgrade ID #
- Be sure unit is connected to network properly - Press "ON/STANDBY" button to power on, and indicator will turn to green. *Need few seconds to complete network connection for 3 seconds. *Be sure to select source other than NET/USB characters. - Front display will show 'Upgrade ID' with 12 digit - Press and keep "Status" key and "Right Cursor" key
Front Panel Display (ID shown above is sample)
MEMO : Upgrade ID
AVR-4308CI / 3808CI Upgrade New Feature Instructions
Table of Contents
1. Before Updating - Requirements --------------------------------------- P1 - Recommendations ------------------------------------- P1 - Key Notes on Network Environment Configuraitons - P1 - About System Setup Memory ------------------------- P1 ---------------------------------------- P2 ---------------------------------------- P3 - P5 ---------------------------------------- P6
2. Basic Operations 3. Install New Feature 4. After The Upgrade
10/1/2008
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA TEL: 201-762-6500 usa.denon.com
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan
1. Before Updating
Requirements
- Broadband Internet Access - Cable/DSL Modem - Network Router or Hub
AVR-4308CI AVR-3808CI
- Proper configuration of the Denon A/V component to work on a particular Network Environment - Ethernet Straight Cable for Direct connection to the Network Environment
Recommentations
- If you did not install, or configure, the Denon A/V Component with your Network Environment, please contact your Network Installer/Integrator to assist. - If connecting the Denon A/V Component to your Network Environment for the first time, please read the following sections in the Instruction Manual provided with your component.
Network Audio : AVR-3808/4308CI Instruction Manual, page 20 Network Setup : AVR-3808CI Instruction Manual, page 32, AVR-4308CI Instruction Manual, pages 32-34 Denon does not recommend using Wi-Fi network connectivity when updating/upgrading the components. This is due to the higher possibility of errors in the update/upgrade process from decreased, and/or drop outs of Wi-Fi signals as well as interruption from other nearby Wi-Fi, or other Radio Frequency generating devices.
- Connect the Denon A/V Component directly to your Network Environment via an Ethernet Straight Cable.
- Once the Denon A/V Component is connected and configured properly to your Network Environment, please test that you can receive and listen to Internet Radio stations on the Net//USB input.
This will show you have, at a minimum, a good Internet connection to the component.
Be sure not to 'Power Off' the unit during the update/upgrade process as this will cause a failure in the process.
If this does occur and the unit will not respond normally, please contact Denon USA Customer Service at 1-800-497-8921.
Key Notes on Network Environment Configurations
- Denon A/V Components are not compatible with PPPoE (Point to Point Protocol over Ethernet).
Contact you Internet Service Provider (ISP) to assist in procuring a PPPoE Router.
- Denon A/V Components are not UPnP (Universal Plug and Play) compliant.
This could be an issue with some routers on the market (we have seen this on some NetGear products). You can disable UPnP in the routers setup configuration, however changing this setting can affect the normal operation of other devices on your Network. Contact your Router manufacturer for assistance.
- Some Firewall settings in your network router may not permit the Updating/Upgrading functionality of Denon A/V Components. Contact your Router manufacturer for assistance. - Be sure to disable "VPN" on any PC on your network environment. Company or office network connections will cause a failure in the process.
About System Setup Memory
- The Update Firmware will not reset the system setup configurations of your Denon A/V component.
Note that after downloading and installing the Upgrade Feature Pack (from October 1st, 2008), you will need to recalibrate your system using the Audyssey Room EQ in the component. This is required for you to get the best level of performance from the newly added Audyssey features of Dynamic Volume and Dynamic EQ.
Page 1
2. Basic Operations
Basic Operations
Menu Icon
Highlight Cursor
Selectable Item
Text guidance
On-Screen Interactive Display
A/V Receiver (shown 4308CI)
'MENU Key' : Show On-Screen Interactive Display 'ENTER Key' : Select 'Cursor Keys' : Move Highlight Cursor
NOTE: Be sure 'AMP key' is flashing, and that the
Front Panel
Remote Control
remote is in "Main Zone" mode, see the following instruction manual section "Remote ControlUnit Operations". AVR-4308CI : page 61 AVR-3808CI : page 59
Page 2
3. Install New Feature (1/3)
1. Select "Manual Setup"
- Press the Menu key on the remote control or on the Front Panel of the AVR. - Pressing the Down Cursor key, highlight the icon (shown as a pair of pliers, a screwdriver and a wrench) for Manual Setup - Press the Right Cursor key to enter Manual Setup
Front Panel Display
2. Select "Option Setup"
- Pressing the Down Cursor key, highlight the icon (shown as a briefcase) for Option Setup - Press the Right Cursor key to enter Option Setup
3. Select "Add New Feature"
- Pressing the Up Cursor key, highlight Add New Feature
Page 3
3. Install New Feature (2/3)
4. Check "New Feature List"
- With the "Upgrade" button highlighted, press the Enter key to Execute the Upgrade Process
5. Confirming Upgrade
- With the "Yes" button highlighted, press the 'Enter' key to execute the update. - If you do not wish to proceed with the update, press the 'Right Cursor' key to highlight the "No" button, then press the 'Enter' key to exit the update procedure.
6. Start Upgrade
Page 4
3. Install New Feature (3/3)
7. Firmware Upgrade is In Progress
- Unit goes into update mode. - The 'Standby' power indicator will go "Red" and the On Screen Interface will turn off. - Update process information can be seen on the Front Panel Display.
Power indicator will go RED
8. Complete Upgrade
- Unit will automatically complete process and repower itself 'On'. - The "Standby Power" indicator will turn green.
Power indicator will go Green
9. Confirm Upgrade Status
- Pressing "Down Cursor" key, highlight Upgrade Status and press "Enter" key
- Upgrade Status page shows you the features added in the Upgrade Feature Pack
Page 5
4. After The Upgrade
Perform Audyssey MultEQ System Calibration
- Once the Upgrade Feature Pack has been successfully downloaded and installed, you will need to perform the Audyssey MultEQ System Calibration Setup again. - Previous calibration settings have been erased as part of the upgrade. This is required due to the new Audyssey Features (Dynamic Volume and EQ) that were added as part of the upgrade. - No other settings in your System Setup have been changed or deleted.
Support
If you have problem for updating, please contact Denon USA Customer Service
Customer Service hours of operation: 9:00 AM to 5:00 PM ET, M-F
1-800-497-8921
During peak call-in times or for after hours Tech and Operational self help support, please use our online FAQ database.
http://denon.custhelp.com/
Page 6
Technical specifications
Full description
The AVR-4308CI is taking surround receivers to the next level. In addition to many of the standard features you have come to enjoy from Denon receivers, custom integration capabilities to home networks and A/V systems has been expanded making this surround receiver the true heart of any high end home theater networked or non-networked. The AVR-4308CI also brings with it the new surround formats that HD has to offer, making the home A/V theater experience like none you have seen or heard before. Add to this the improved connectivity for portable devices for ease of use, and you will see why this receiver has already received awards for product of the year.
| General | |
| Product Type | AV network receiver |
| Width | 17.1 in |
| Depth | 17.9 in |
| Height | 7.7 in |
| Weight | 41.7 lbs |
| Audio System | |
| Sound Output Mode | Surround Sound |
| Built-in Decoders | Dolby Pro Logic, Dolby Pro Logic II, Dolby Digital Surround EX, DTS Neo:6, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, Dolby Digital, DTS decoder, Dolby Pro Logic IIx, Dolby Digital Plus, DTS-HD decoder, Dolby TrueHD |
| Audio D/A Converter | 24bit / 192kHz |
| Sound Effects | Cinema EQ |
| Equalizer | Yes |
| Digital Sound Processor (DSP) | Yes |
| DSP Presets | Jazz club, Matrix, Wide screen, Classic Concert, Mono Movie, Rock Arena, Virtual Surround, Video Game, 7ch stereo, Super Stadium |
| Surround System Class | 7.1 channel |
| Response Bandwidth | 10 - 100000 Hz |
| Signal-To-Noise Ratio | 102 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Total Harmonic Distortion | 0.005% |
| Amplifier Output Details | 140 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.05% - 7 channel(s) ( surround ) 170 Watt - 6 Ohm - at 1 kHz - THD 0.7% - 7 channel(s) ( surround ) |
| Bass Control | Yes |
| Treble Control | Yes |
| Built-in Display | Fluorescent |
| Display Dimmer | Yes |
| Additional Features | Digital signal format auto detection / auto switching, on-screen display, multi-room audio output, A/B/A+B speaker switch, source direct, in-line crossover, Auto Setup / Room EQ, iPod ready |
| Signal Processing Features | |
| Video Conversion/Scaling | Composite video to S-Video conversion, composite video to component video conversion, S-Video to component video conversion, analog to HDMI up conversion |
| Connectors | |
| Headphone Jack | Yes |
| Coaxial Digital Input | Yes |
| Optical Digital Input | Yes |
| Optical Digital Output | Yes |
| Equalizer | |
| Equalizer Type | Digital graphic |
| Equalizer Band Qty | 9 bands |
| Equalizer Center Frequencies | 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 2000 Hz, 4000 Hz, 8000 Hz, 16000 Hz |
| Radio | |
| Type | Radio / HD radio tuner - AM/FM - digital |
| Tuning Display | Fluorescent display |
| Preset Station Qty | 56 preset stations |
| Antenna Form Factor | Loop AM / wire FM |
| Auto Preset Memory | Yes |
| Additional Features | Station naming, XM satellite radio ready |
| Digital Player (Recorder) | |
| Type | Digital player |
| Supported Digital Audio Standards | WAV, WMA, AAC, MP3, FLAC |
| Supported Bit Rate | 32 - 320Kbps (MP3) / 48 - 192Kbps (WMA) |
| Network Player | |
| Type | Network audio player |
| Functionality | Digital audio playback, Internet radio playback |
| Supported Digital Audio Standards | WMA, MP3 |
| Connectivity | Wireless / wired |
| Connectivity Protocols | IEEE 802.11b (Wi-Fi), IEEE 802.11g, IEEE 802.3 (Ethernet), USB |
| Remote Control | |
| Type | Universal remote control - infrared |
| Features | Programmable, touch panel, learning, multi-brand compatibility, electro-luminescent touch display |
| Remote Control (2nd) | |
| Type | Remote control |
| Connections | |
| Connector Type | 1 x headphones - front 1 x S-Video input ( 4 pin mini-DIN ) - front 1 x composite video/audio input ( RCA phono x 3 ) - front 1 x SPDIF input ( TOSLINK ) - front 2 x HDMI output ( 19 pin HDMI Type A ) - rear 4 x HDMI input ( 19 pin HDMI Type A ) - rear 2 x trigger - rear 2 x remote control - rear 1 x AM antenna - rear 1 x FM antenna - rear 1 x XM antenna - rear 1 x turntable audio input ( RCA phono x 2 ) - rear 2 x SPDIF output ( TOSLINK ) - rear 3 x SPDIF input ( RCA phono ) - rear 3 x SPDIF input ( TOSLINK ) - rear 2 x audio line-out ( RCA phono x 2 ) - rear 7 x audio line-in ( RCA phono x 2 ) - rear 2 x composite video output ( RCA phono ) - rear 6 x composite video input ( RCA phono ) - rear 2 x S-Video output ( 4 pin mini-DIN ) - rear 6 x S-Video input ( 4 pin mini-DIN ) - rear 1 x monitor output ( 4 pin mini-DIN ) - rear 1 x monitor output ( RCA phono ) - rear 1 x 7.1 channel audio line-in ( RCA phono x 8 ) - rear 1 x 7.1 channel audio line-out ( RCA phono x 8 ) - rear 1 x composite video output (multi zone) ( RCA phono ) - rear 2 x audio line-out (multi zone) ( RCA phono x 2 ) - rear 3 x component video input ( RCA phono x 3 ) - rear 3 x component video output ( RCA phono x 3 ) - rear 1 x serial ( 9 pin D-Sub ) - rear 11 x speakers output ( banana/spade x 2 ) - rear 1 x network ( RJ-45 ) - rear 1 x DENON LINK - rear 1 x USB - rear 1 x USB - front |
| Miscellaneous | |
| Included Accessories | AM antenna, FM antenna, auto calibration microphone |
| Power | |
| Power Device | Power supply - internal |
| Universal Product Identifiers | |
| Brand | Denon |
| Part Number | AVR-4308CI |
| GTIN | 04560119537904, 00081757508087 |
Tags
Colour Motorazr V3I A Bois CD-01U PRO CE-5430 704 TV TC-20E II 4570 EX SPH-M330 Fantom-X 6 NVX-P1 TX-NR3007 RT25dass HV 3900 Smartphone DMC-GF1C Cardio CW Nikon SA-HT640 XM-504X IC-RP1510 EX-V8 AD-44 Glmv169 PD113P 14GX8310-75R Tourer Crystal 47PFL5604H 6280SL-T E2409HDS FW-C115 CW-29Z306T LN-T3232H DVP-NS433 HD80 2T CQ-C5400W HP 38G AJ300D-12 Dect 121 KX-F110 42PX4DV-EA Armxxl 129 EMP-760 KDL-40HX800 Aconda 9372 FLS479C Fr FR966-00S T2326 CDE-101R L1510S-lb500k-gl- VR668 FMN0960VM 22DC279-62 Polaroid A801 Espio 738 WM-EX405 PSR-172 16846-2 KX-FP145E VH6-II Nikon D70 Stylus T10 Takara GP39 YZ250-2001 GT-S7350 RBC30SET Server Esl 23 Preset 550 IR Compact Touran DCR-TRV720 S23 M796 SSC190 150MP TNT T100 Thinkpad A21M AH530 SF-608R DVR-310 Ideapad U460 Review MSL-15 EOB68713X Memory Belt FR-N7FX Ventaro AW1046F WGT624SC BDV-IT1000 DVD-S1800 DVD-SH854 FW630 Lancer 99 XI 5 JV-880 Mdx4600 Z 6100
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
Sitemap
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101