M O D E L

I N F O R M A T I O N

A/V Surround Receiver

AVR-5800
Worlds First 7.1 Channel A/V Surround Receiver with DTS-ES 6.1 Discrete, DTS-ES 6.1 Matrix, DTS Neo:6 and THX Surround EX
s THX Ultra Certified 7-channel High Power Amp
Front. 170 W + 170 W 200 W + 200 W Center.. 170 W 200 W Surround. 170 W + 170 W 200 W + 200 W Surround back. 170 W + 170 W 200 W + 200 W
(8 ohms, 20Hz - 20kHz, 0.05 % THD) (6 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) (6 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) (6 ohms, 20Hz - 20kHz, 0.05 % THD) (8 ohms, 20Hz - 20kHz, 0.05 % THD) (6 ohms, 20Hz - 20kHz, 0.05 % THD)
s DDSC-Digital, for High-quality Sound Reproduction DDSC-Digital is a circuit configuration specially designed by DENON in which all the elements of the surround processor are optimized by the use of selected high performance discrete elements, including separate A/D and D/A conversion, with sophisticated dual DSP surround decoding.
The AVR-5800 features an equal power 7-channel amplifier section, with identical amplifier design on all 7 channels. The Front (L/R), Center, and Surround (L/R) channels are driven by 170 watts of power each, and the two Surround Back channels, used for 6.1-channel DTS-ES and THX Surround EX sources, are also each powered with 170 watts (all channels rated into 8 ohms, 20 Hz - 20 kHz). High current, low impedance drive-capable discrete power transistors are used for each channel, and the high power output of 170 watts per channel (into 8 ohms) ensures that the speakers are driven with ample foundation to reproduce movie and music soundtracks with superb fidelity and widest dynamic range. The AVR-5800s power section is configured with a 1200VA high current toroidal transformer and large high capacity electrolytic capacitors optimized for audio use to deliver a constantly stable, clean supply of power. The AVR-5800 proudly bears the THX Ultra logo, certifying that it satisfies the strict standards of Lucasfilm, Inc., governing performance, features, sound quality, power, stability into low impedance speaker loads (3.2 ohms and higher) and ease of operation. In addition, THX 5.1 and 4.0 post-processing enhancements enrich the motion picture soundtrack reproduction, providing timbre matching, re-equalization, precision time delay adjustments, dynamic decorrelation and superior bass management.
s Chassis construction focused on high-quality pure audio
1. 24 bit, 96 kHz A/D Converters The AVR-5800 uses highly accurate 24 bit, 96 kHz A/D converters to handle analog to digital conversion. Since the converted digital signals are at extremely high resolution, the resulting sound quality is far more faithful to the original source than with conventional designs. 2. Digital Interface Receiver Supporting 24 bit, 192 kHz Signals The AVR-5800 includes a Digital Interface Receiver (DIR) that distinguishes various types of digital input signals, including 24/192 and 24/96 stereo PCM signals, performs the appropriate signal processing, and transmits the information to the DSP block. 3. Analog Devices SHARC Dual 32-bit Floating Point DSPs Featuring the latest Analog Devices 32 bit floating point SHARC DSP devices, the AVR-5800 provides superb resolution and widest dynamic range of Dolby Digital, DTS and PCM audio signals. 4. 24 bit, 192 kHz All-channels Differential-mode D/A Conversion For optimum fidelity and transparency, the AVR-5800 features the latest Analog Devices high resolution AD-bit, 192 kHz DACs, in 16-DAC differential configuration (2 DAC channels per each audio channel).

s DENONs latest surround technology faithfully recreates the surround
sound produced at the dubbing stage. 1. DTS (Digital Theater System) 1-1) Featuring the Worlds First DTS-ES Extended Surround 6.1 Discrete & DTS-ES 6.1 Matrix Decoding The AVR-5800 is the worlds first AV component that is equipped with the DTSES (true discrete) 6.1 decoder, developed by DTS to provide dramatically improved surround sound panoramic reproduction and superior surround sound localization.
By positioning the power transformer at the center of the unit, the AVR-5800 is equipped with a chassis construction in which unwanted vibrations are suppressed and excess vented heat is minimized. The digital circuits have been placed in the lower center of the unit and are completely shielded in their own enclosure, and the power amp circuits are located on the left and right sides. In addition, the analog circuitry has been isolated from the video circuitry to completely eliminate any mutual interference. The total chassis design preserves the purity of the audio signal from input to output to give your home theater a clean yet powerful sound, alive with all the details of the original recording.
Like DTS 5.1-channel sound, the sound from the Surround Back channel of DTS-ES is also provided in a discrete configuration. The addition of a Surround Back channel to the 5.1-channel sound enables more faithful reproduction of the sound originally designed by film and music producers. When a 6.1-channel DTS ES discrete recording is played, the AVR-5800 automatically detects the signal and plays the source in 6.1 discrete mode. 1-2) Supports DTS-ES Extended Surround Matrix 6.1 ES Matrix processing, developed by DTS, produces the effect of 6.1-channel sound by extracting a Surround Back signal from the Surround Left and Surround Right channels, compatible with the growing number of movies released on DVD with DTS ES encoding. Unlike other decoders which use generic logic decoding to extract the sixth surround back channel, the AVR-5800 is the worlds first A/V component that features DTS 5.1 decoding combined with the DTS-developed matrix algorithm for optimum DTS ES 6.1 matrix decoding. 1-3) DTS Neo:6 Stereo-To-Surround Decoding Featuring the newest DTS matrix technology, the DTS NEO-6 function pro vides up to 6.1 channel surround sound from conventional stereo sources, and can be used with virtually any 2 channel source, such as CD, tape, FM, TV, or any other stereo source, analog or digital. 2. THX Surround EX Decoding 3. Dolby Digital Decoding

s Pure Direct Mode, to Deliver Pure Audio Quality
s Input/Output Terminals For Every A/V System Audio Inputs 13 Sets Analog Input. PHONO, CD, TUNER, DVD, VDP, TV, DBS/SAT, V-AUX, VCR-1, VCR-2, VCR-3, CDR/TAPE-1, MD/TAPE-Sets 8-ch Analog EXT. Input. FRONT L/R x 2, CENTER x 2, SURROUND L/R x 2, SURROUND BACK L/R x 2, SUBWOOFER x 2.. OPTICAL X Sets Digital (Optical) Input 3 Sets Digital (Coaxial) Input. COAXIAL X Sets Dolby Digital RF. RF Audio Outputs 8-ch Analog PRE Output.. FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER. VCR-1, VCR-2, VCR-3, CDR/TAPE-1, 5 Sets Analog REC Output MD/TAPE-Sets Analog Multi Zone Output. L/R x Sets Digital (Optical) Output. OPTICAL x 2 Video Inputs 3 Sets Component Video Input. DVD, TV, DBS/SAT 8 Sets Composite Input.. DVD, VDP, TV, DBS/SAT, V-AUX, VCR-1, VCR-2, VCR-Sets S-Video Input.. DVD, VDP, TV, DBS/SAT, V-AUX, VCR-1, VCR-2, VCR-3 Video Outputs 1 Set Component Video Output. MONITOR 5 Sets Composite Output.. VCR-1, VCR-2, VCR-3, MONITOR-1, MONITOR-Sets S-Video Output. VCR-1, VCR-2, VCR-3, MONITOR-1, MONITOR-2
In addition to surround sound playback, the AVR-5800 lets you enjoy pure 2-channel stereo sound as well through its Pure Direct mode. In Pure Direct mode, power to the video circuitry and the front panel display is turned off, and during analog input, power to the digital circuitry is also automatically turned off. Furthermore, during 2-channel linear PCM input, the D/A converter section is re-configured to 8 DAC dual-differential operation (4 DAC channels for each audio channel) to provide optimum D/A conversion of 2-channel PCM sound sources, such as CD with the highest transparency and widest dynamic range.

s AL 24 Processing

Specifications
s Power Amplifier Section
The AVR-5800 includes DENONs renowned 24 bit ALPHA processing technology that reproduces digital signals in a waveform with the smoothness of analog signals. This technology thoroughly suppresses annoying quantization distortion and faithfully reproduces the delicate musical details of low-level signals. AL 24 processing works in 2-channel Stereo, Direct, Pure Direct modes.
s Digital-to-Analog Recording
The AVR-5800 lets you make analog recordings of digital signal sources.

s RS-232C Port

The AVR-5800 includes an RS-232C port for connection to external whole-house control systems, from companies such as Crestron, Panja and others, and provides a software/firmware upgrade pathway.
s Supports IEEE 1394 Upgrade, via upgradeable DSP board and upgradeable

digital jack panel.

s Support for Multi Zone Configurations

The AVR-5800 provides a Multi Zone Output function and a Select function that let you output different sources to multiple zones. Sources can be selected for output to up to 2 additional zones, in addition to the main room. Multi-room Zone 1 can have variable pre-amp output along with composite video feed, and Multiroom Zone 2 can have fixed stereo audio pre-output. The AVR-5800s Power Amplifier Assign function lets you assign the 2 Surround Back (SB L/R) amplifier channels to instead drive the Multi-room Zone 2 powered speaker outputs, with 170 Watts per channel power output capability, while still providing 5 full amplifier channels to drive the main and surround speakers in the home theater room.
s Includes the Aktis RC-8000 remote control unit with
Rated output *THD figures are power amp stage values. Front.. 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD) Center. 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD) Surround.. 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD) Surround back. 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) 200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD) s Preamplifier Section Input sensitivity/impedance PHONO(MM).. 2.5 mV/47 kohms CD, DVD, VDP, TV, DBS/SAT, V-AUX, VCR-1 VCR-2, VCR-3, CDR/TAPE-1, MD/TAPE-2, FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK.. 200 mV/47 kohms SUBWOOFER.. 200 mV/15 kohms Output level/Load impedance FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER.. 1.2 V/10 kohms V-AUX, VCR-1 VCR-2, VCR-3, CDR/TAPE-1, MD/TAPE-2, MONITOR.. 200 mV/47 kohms Frequency response. 10 Hz - 100 kHz; +0, -3 dB (DIRECT MODE) RIAA deviation.. 1 dB (20 Hz - 20 kHz) Tone control.. Treble: 10 dB at 10 kHz, Bass: 10 dB at 100 Hz s FM Section Tuning frequency range. 87.5 - 107.9 MHz Usable sensitivity. 1.0 V (11.2 dBf) s AM Section Tuning frequency range. 520 - 1710 kHz Usable sensitivity. 18 V s General Power supply.. AC 120 V, 60 Hz Power consumption.. 11.0 A Dimensions.. 434 (W) x 216 (H) x 478 (D) mm 17.1 (W) x 8.5(H) x 18.8(D) Weight... 28.0 kg, 61.7 lbs
large LCD touch panel and the RC-8001st Charger/RF Base Station.
*Design and specifications are subject to change without notice. *THX is a registered trademark of Lucasfilm Ltd. * Lucasfilm Ltd. & TM. All Rights Reserved. Surround EX is a jointly developed technology of THX and Dolby Labs, Inc., and is a trademark of Dolby. Used under authorization. *Dolby, Dolby Digital, Pro Logic, and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation.
DENON ELECTRONICS DIVISION OF DENON CORPORATION (USA) 19 CHAPIN ROAD, P.O. BOX 867, PINE BROOK, NJ 07058-9777 USA TEL: 973-396-0810 http://www.del.denon.com DENON CANADA INC. 17 DENISON STREET, MARKHAM ONTARIO, CANADA L3R 1B5 TEL: 905-475-4085
NIPPON COLUMBIA CO., LTD. 14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN http://www.denon.co.jp

Cinepro Home Theater: Cinepro 3k6SE3 Gold 400Wx6 Channels, Balanced and Unbalanced Inputs $1,999: As Is, No Warranty, Used as Store Demo.
Digitally encoded movies require amplification that can maintain a wide dynamic range without distortion; and whereas dialogue normally requires an average of 5-10 watts, key action scenes (such as the White House explosion in "Independence Day") peaked close to 750 watts for brief bursts in Cinepro's extensive tests. To accommodate this range of levels, the 3K6se is capable of generating a peak output of 1 kilowatt per channel (4 ohms). The inputs and outputs are divided into three two-channel groups (front LR, center/sub, rear LR). Each group can also be converted from two to one channel (bridged mono). In the multi-channel mode, the 3K6se is rated at 375 watts per channel into 8 ohms (550 watts into 4 ohms). The mono configuration is rated at 1000 watts into 8 ohms (1200 into 4 ohms). __________________________________________________
NAD M25 Amp NAD Electronics: M25 7160Wx7 Channels, Balanced/Unbalanced Inputs $1,899: Private collection
Unlike most receivers and amplifiers, the M25 can deliver its full-rated power, free from distortion for hours on end. Custom designed heat sinks and temperature regulated, variable speed cooling fans work to keep the M25 running cool under the most severe operating conditions. The M25 is actually made up of seven individual mono block amplifiers with each channel using a balanced junction FET input stage to eliminate cross-talk, resulting in exceptionally low levels of noise and distortion. Additionally, NAD employs a unique electronic ground isolation circuit to prevent ground loop noise in the systema common problem with many complex multichannel systems. NAD's proprietary PowerDrive circuitry measures each channel's dynamic impedance individually and computes the optimum power supply voltage required to drive the output stage for maximum power and efficiency.
____________________________________________
Shanling T200A Tube CD http://www.shanling.com/ $1,299: Stunning design. Private collection
Line level output: 0 - 2.0 V Frequency Response: 5 Hz - 45 kHz 0.5 dB S/N Ratio: 118 dB Distortion: < 0.002 (@ 1 kHz) Dynamic Range: 115 dB Crosstalk: > 100 dB Power consumption: < 70 W L x W x H: 430 x 300 x 145 mm Weight: 14 kg
_____________________________________________
Classe SSP-75 Processor http://www.classeaudio.com/discontinued/images/SSP 75$799: Sweet sound, exemplary unit for the money. Private collection. Shanling STP80 Tube Amp http://www.shanling.com/
$1,799: Sweet sound, terrific value. Private collection. Comprised of 4x EL34 output tubes and 3x 6N3 tubes. Output Power: 2x 35W RMS Frequency Response: 18 Hz - 30 kHz ( 0.5 dB) S/N Ratio: > 95 dB Distortion: < 1% Input Sensitivity: 100 mV Inputs: 4x RCA switchable Output Impedance: 4 / 8 Ohm L x W x H: 455 x 310 x 175 mm Weight: 18.5 kg With Class's remarkable SSP-75 preamplifier/ surround sound processor, the true re-creation of a live performance is only the beginning. Indeed, the SSP-75 provides truly stunning reproduction of your favorite music with a two-channel signal path optimally balanced to provide both exceptional performance and longterm reliability. Left and Right Front balanced (XLR) inputs and outputs are standard. In fact, all six output channels (5.1) are balanced, erasing the problems with ground loops. The new world of multi-channel sound will delight you. The design of the SSP-75 takes you into the future and delivers the most up-to-date digital processing available. Class's design mandates have always included unusual degrees of flexibility, meticulous construction and simple, intuitive operation.

___________________________________________
Sunfire Theater Grand III Processor SUNFIRE: Luxury for all $699: Excellent processor. Used as store Demo
7.1 Channel Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS Neo:6, and Dolby Pro Logic II decoding Sunfire's Side-Axis outputs for 9.1 channels total playback Holographic Imaging Second zone can play sources independent of the main zone Preprogrammed and learning remote control with LCD Dynamic Tuner Noise Reduction circuit Three 100 MHz+ HDTV compatible wide-bandwidth component video inputs and two outputs Six audio/video inputs, each with audio, S-Video and composite video Three audio-only inputs, including Moving Magnet Phono input for LPs Eight channel analog audio input using RCA connectors for DVD-A, SACD, or other external multi-channel source
B&K 200.5 Amp B&K Components: High End Audio Equipment Manufacturer : Reference 200.5 $1499: Unbeatable amp and sound quality. Used as store Demo Designed for the ultimate home theater and/or multi-room applications, the B&K Reference 200.5 offers five channels of 200 watts each. Its pure B&K heritage makes it the ideal choice for audiophiles who want a home theater system, but demand the same level of audio reproduction that they have come to expect from B&K. Power Rating @ 8 Power Rating @ 4 Number of Channels Current Peak to Peak Dynamic Head Room 200 W 375 W Amps 1.2 dB
Total Harmonic Distortion (THD) 0.09% Signal to Noise (S/N) 95 dB __________________________________________________
Cambridge Audio T500 Tuner $99: Shines with a good FM antennae. Excellent value. http://www.cambridgeaudio.com/assets/documents/T 500Manual.pdf _____________________________________________
Music Hall MMF-5 Turntable with cartridge.:: music hall audio ::. $299: Astounding value and detail. Private collection.
The Music Hall mmf-5 turntable is a two speed belt driven audiophile turntable employing the unique dual plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Viso elastic cones separate the two platforms and provide vibration damping. The mmf-5 comes complete with cartridge mounted.

Martin Logan Script Speakers MartinLogan | Script $899/pair: Smooth sounding and excellent value. Private collection.
"Design a pure, flexible surround speaker".that's exactly what we've doneand more. This versatile wall mount and speaker excels as a stereo main, rear surround or in a multimedia configuration and can be driven to perfection by most AV receivers. We were stunned by the sound produced by the little Scripts! On all types of program material our latest creation reproduced sound with the superior immediacy and clarity that we have always demanded from alwa our electrostatic technology. Suddenly, we realized that this new creation could add high resolution electrostatic sound to any room or application. It is configured for single-wire single stereo operation. _________________________________________________ ______________________________________
Martin Logan Odyssey Speakers MartinLogan | Odyssey $2999/pair: Excellent Hybrid Electrostatic speakers. Private collection.
Odyssey leverages Martin Logans breakthrough hybrid speaker engineering into a unique design maintaining controlled dispersion and outstanding dynamic range while minimizing room interaction. Its unique bass control systemadapted from Prodigy's exclusive ForceForward adapted ForceForward consists of two proprietary dynamic drivers engineered to perfection. A 10-inch rear-firing driver provides powerful firing depth while conditioning and extending bass room response. A second 8-inch front-firing driver extends and resolves bass firing detail, resulting in clean powerful bass throughout the l listening room. Odyssey is both single and bi-wire capable wire capable. __________________________________________________
Sony DVP-CX995V 400 disc changer DVP-CX995V | $99: All your DVDs and CDs in one player. Store Demo. Velodyne Powered Sub Velodyne $399: Excellent sub for a medium sized room. Private collection. The DEQ-R Series subwoofers are the ideal combination of technology and an intuitive user interface, and they offer incredible value. Quickly and easily add a powerful, featurerich subwoofer to your entertainment system. Use the included remote control to maximize the bass in your room from any source, while a clearly visible front LED display instantly confirms your choice. The DEQ-R subwoofers deliver great bass.made easy. __________________________________________________ Simplify your life and manage your entire DVD and CD collection in one place with the DVP-CX995V mega-changer. This 400-disc DVD/CD/Super-Audio CD (SA-CD) changer is not only the perfect media storage device, it also provides excellent video and audio performance, with video upscaling to high definition (1080i/720p) resolution and high quality audio transmission through an HDMI connection. It features Precision Cinema Progressive circuitry, Dolby Digital and dts 5.1 channel outputs and compatibility with DVD-RW/R/+RW/+R, MP3, JPEG, CD-RW/-R, VCD and SVCD playback.

________________________________________________________________
Denon AVR 5800 Receiver/Processor Denon USA | A/V Receivers & Separates $899: Packed with features. Store Demo. Shanling MC3000 Music Center http://www.shanling.com/ $1199: Top notch performance for the price. Private collection. The Shanling MC-3000 Music Center is a superb all-in-one music entertainment system, simply add speakers! Perfect for living rooms, the lounge room, bedrooms, the kitchen and study; even in the office or as a basis for larger system, the MC-3000 can also be connected to extra amplifier or a subwoofer plus has connection for several external audio sources. (iPod is not included.) With a dedicated iPod dock and 60W of power, the MC3000 combines a high quality top-loading CD-player, FM tuner in a single unit. __________________________________________________ The world's most advanced Home Theater Receiver is Denon's claim for the AVR-5800. It's the world's first 7.1channel receiver with DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Neo: 6, THX surround EX, Dolby Digital 5.1, and Dolby Pro Logic. Power output: 170Wpc x7 @ 8ohms, 0Hz-20kHz, <0.05% THD, 2 channels driven; 200Wpc x7 @ 6ohms Inputs: 8 composite/S-video-equipped A/V inputs, including 3 video tape loops, 3 component-video inputs, plus MM phono, CD, and 2 analog audio tape loops Digital inputs: 1 AC3-RF RCA coax, 6 TosLink optical, 3 coax Digital outputs: 2 TosLink Video outputs: 2 S-video/composite, 1 composite (Zone 2), 1 component (frequency response DC-30MHz, +0/-3dB.
Rotel RQ970BX Phono Equalizer Home Theater System Surround Sound Amplifier DVD Player - Rotel PRODUCT ARCHIVES
$99: Big bang for small bucks. Private collection. The all-steel RQ-970BX measures 17.375" x 2.875" x 7.75" and weighs all of 6.8 lbs. The front panel has only a power switch and an accompanying LED indicator. The rear panel has a set of RCA inputs and outputs, a grounding screw, and a switch for choosing between moving coil (MC) and moving magnet (MM) cartridges. The MC section has an input sensitivity of 210 microvolts and an input impedance of 100 ohms. The MM section has an input sensitivity of 2.5 mV and an impedance of 47K ohms. The output sensitivity is 150 mV with an impedance of 100 ohms. S/N ratios are 70 dB for the MC section and 75dB for the MM section. __________________________________________________
Polk Audio XM Tuner XRt12 Reference Tuner Product Page : Reference XM Satellite Radio Home Tuner : Polk Audio $149.99: Excellent sound quality with video out. Previously used. The Polk Audio XRt12 tuner is the first component XM tuner and it is the performance reference standard for all XM tuners. You no longer have to remember to take your plug n' play XM tuner out of the car and hook it up to a huge home adapter. Set it up once and the XRt12 is ready to serve up true high fidelity XM programming in your home. Its component-standard 17-inch wide chassis looks right at home among your cherished audio gear. __________________________________________________

Harman Kardon HK 3385 Receiver Harman Kardon - Product Support - Select Your Product $199: Excellent for a small system. Private collection. 80 Watts x 2, both channels driven at full power at 8 ohms, 20Hz 20kHz, <0.07% THD; 160 watts total 100 Watts x 2, both channels driven at full power at 4 ohms, 20Hz 20kHz, <0.2% THD; 200 watts total High-current capability, ultrawide-bandwidth amplifier design with low negative feedback All-discrete amplifier circuitry __________________________________________________