Professional CD Player

DNC680
The DN-C680 represents the best of CD player technology developed by Denon for studio and broadcast production applications.

*Index Search

The select knob can be used to perform an index search when the index button is on the LED on the index button lights up.

*Auto Space

During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the auto space button to on (the LED on the auto space button lights up).

*Auto Edit

This function automatically divides the total recorded time on the disc in half and rearranges the tracks so that they fit nearly onto the A and B sides of a cassette tape.
*Display of Playback Locations
A bar graph display indicates playback points on the track being played. Elapsed time and remaining time displays are switched using the time button.

*CD-R Reading Capability

DN-C680 reads CD-R discs with or without tables of contents (however, some CD-Rs without tables of contents might not be readable).
*19-Inch Rack Mountable (Height: 3U) *Large FL Display, Illuminated Rubber Buttons *Track Search Select Knob (Easy Track Selection) *Jog Dial/Shuttle Wheel
Perform searches to 1 MD frame precision using the jog dial and easy scans using the shuttle ring.
*Program Play (Maximum 25 Tracks)
1) When the play mode is set to single, the player stands by at the beginning of next track (at finish mode next ). 2) When the play mode is set to continuous, the playback is continued according to your programmed sequence.
*Play Mode and Finish Mode
1) Play mode 1-1 Continuous: Play a whole disc 1-2 Single: Play a track 1-3 A-B: Play an A-B loop 2) Finish mode (stop, next, recue) (only when single track play is selected) 2-1 Stop: Stops at the end of the track 2-2 Next: Standby at the beginning of the next track after when the selected track is played 2-3 Recue: After the selected track has played, the unit will standby at the beginning of that selected track.

*Auto Cue

After a track is selected, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track starts. The level at which sound is first detected can be set between -36 to -72 dB (7 steps).

*End Monitor

Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect outros. The point at which monitoring starts can be set within a range of 5 to 35 seconds (7 steps) prior to the trackend. s

*End of Message (EOM)

At the end of a track, the play/pause button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.
*Pitch Control (9.9%, 0.1% step) *Instant Start
Playback starts less than 0.01 seconds after the play button is pressed.
Rack mountable CD player 2 channels (playback: stereo/mono selectable) 18-bit 8-times oversampling digital Digital Filter filter Dual 18-bit linear D/A Converter 44.1 kHz Sampling Frequency Total Harmonic Distortion 0.003% 105 dB (A-weighted) S/N Ratio 100 dB Channel Separation 5 Hz kHz 1 dB 20 Frequency Response (1 kHz, 0 dB playback) Analog Output Balanced active, XLR connector *1 Transfer and Connector Unbalanced, RCA connector Balanced: +18 dBm (0.5 dBm), Output Level 600 ohm Unbalanced: 2 V, 10 kohm Output Level Adj. Range +22 dBs to -20 dBm (balanced) 20 mW (30 to 40 ohm) Headphone Output Digital Output Balanced active, XLR connector Transfer and Connector Unbalanced, RCA connector AES/EBU or IEC-958 Type 2 Signal Format or SPDIF Balanced: 3 Vp-p, 110 ohm Output Level Unbalanced: 0.5 Vp-p, 75 ohm RS-232C/RS-422A(switchable), Serial Remote D-sub 9-pin D-sub 25-pin Parallel Remote AC 230V, 50 Hz Power Supply 19 W Power Consumption 483 (W) x 132(H) x 297 (D) mm Dimensions 19 (W) x 8.8 (H) x 11.7 (D) inches 6.5 kg (14.3 lbs) Weight Type Audio Channel
Design and specifications are subject to change without notice.