Product Description

The Denon RC-680 wired remote control is specifically designed for use with the Denon DN-C680 professional CD Player. The remote control supports all functions available in the DN-C680's remote control connector. The RC-680 remote control can also be used with other model Denon CD players such as the DN-650F, DN-951 FA and DN-961 FA ( See below function descriptions for functional exceptions and details of use with other models ). A DB-25, male to female control cable is furnished with each RC-680 remote control. NOTE: CD players that can use this remote control may have machine software "PRESET" selections that can have an effect on remote control functions. These preset selections can be set to select that all remote control commands can be inhibited. Other settings can disable or modify certain remote commands once the "play" command has been issued. Please consult the manual for your unit before connecting this remote control for the appropriate menu settings to avoid operating difficulties. RC-680 DB-25 connector
1- Chassis Gnd. 2- Play function 3- Pause function 4- Standby / cue function 5- Track > function 6- Track < function 7- Search > function 8- Search < function 9- Fader Start 10- nc 11- nc 12- nc 13- nc 14- Play tally 15- Pause tally 16- Standby / cue tally 17- Index 2 / 3 tally 18- nc 19- nc 20- nc 21- nc 22- + 5 vdc @ 80 ma. Max 23- Command common 24- EOM tally 25- nc

Installation

With power to the CD player turned off, connect the male end of the supplied DB-25 cable assembly to the remote control connector on the rear of the CD player to be controlled. Connect the other end to the the RC-680 remote control unit. Turn on power to the CD player. Installation is now complete. Consult your machines operators manual for detailed instructions regarding "preset modes" and machine operation. Make sure that the "remote inhibit mode" is not activated.

Pause 470

Standby/cue Index 2 / EOM 12

Standby/cue

Compact Disc Remote Functions
The remote control functions and tally indications supported by the RC680 are only those that are made available at the parallel remote control connector of the DN-C680 or other Denon CD player to which the remote control is connected. The EOM and INDEX indicators may not be available on some model CD players. Furthermore, EOM and INDEX tally functions may be combined on some models. Please note that most Denon CD players have machine software preset menu functions. These preset selections must be set properly selected prior to using the RC-680 remote control. PRESET features include "Play Lock " which is a preset which can be set to disable certain buttons' functions once the "play" command has been issued. "Tally Flash " preset can decide to flash or not to flash the remote control's tally LEDs. The "EOM Indicator" can be activated to flash the EOM led when a pre-selected amount of time remains on the current cut being played. When "EOM" is active, the Play LED will also begin to flash when the EOM preset time has been reached. The RC-680 remote control has an individual yellow PAUSE button. The PAUSE function is a alternate function combined on many CD player front panels with the PLAY function. The PAUSE button will halt playback at the point at which it is pressed. Pressing the PLAY button will resume playback at the point at which the PAUSE command was issued. Pressing STANDBY-CUE will return to the beginning of the selected cut.

Track >

Track <

Search >

Search <

RC-680 Schematic

Department of THEATER & DANCE
Office of the TECHNICAL DIRECTOR
Strider Control System Specs
file last updated: 6.10.2009 (JDE)
STRIDER THEATER - COLBY COLLEGE - WATERVILLE, MAINE
LIGHTING CONTROL ETC Insight 2X (software version 3.1) computer assisted control w/option to use Emphasis server 500-512 Control Channels (dimmers may not be controlled by more than one channel simultaneously) 1080 Submasters (10 pages of 108 available at a time) 256 Circuits (Each circuit is hard-wired to a 20 amp/2.4 kilowatt dimmer. Some positions have two input receptacles per circuit. Under no circumstances shall the capacity of a dimmer be exceeded.) Cues can be loaded into memory using a keypad and/or the 108 channel sliders on the lighting console Remote Focus Unit for programming from house etc. offers complete control of all board functions MIDI communication with sound control (transmit and receive) Cueing can be event based, time-code based, or a combination of the two Two-scene preset operation is NOT POSSIBLE with this lighting console SOUND CONTROL Soundcraft Spirit Live 4 manually operated analog mixer 16 input channels with 3-band graphic EQ (Mid & LF have adjustable center-points) 4 stereo input channels with 2-band graphic EQ 6 master outputs (feeding six amplifiers/speaker zones) 5 auxiliary outputs Playback Devices Denon DN-C620 CD deck Denon DN-C680 CD deck Denon DN-M1050R minidisc deck with hot start (20 tracks) function Numark iDEC iPOD deck Digital Performer (Mac based) digital audio workstation Roland VS-1680 hard disk recorder (additional devices available per consultation with the Technical Director) SFX computer assisted audio playback, level control, and show control Unlimited asynchronous playback tracks, each with 8 discreet output channels (All sound files must be either.wav or.mp3 format) MIDI control of digital audio workstation, hard disk recorder, & digital effects processor MIDI communication with lighting control (transmit and receive) Cueing can be event based, time-code based, or a combination of the two Sound can be operated either manually and/or with SFX computer assistance COMMUNICATION SYSTEM Clear-com single channel party-line system with 13 corded, single-channel headsets capable of being connected to any of 19 locations around the theater building (virtually anywhere is possible). Headsets may be daisy-chained for multiple stations at one connection location.