E5H01UD_V4_EN.book Page 1 Wednesday, October 15, 2008 10:37 AM
BLU-RAY DISC / DVD VIDEO TRANSPORT

DVD-2500BTCI

OPERATING INSTRUCTIONS MODE DEMPLOI INSTRUCCIONES DE FUNCIONAMIENTO
E5H01UD_V4_EN.book Page I Wednesday, October 15, 2008 10:37 AM

ENGLISH

FRANAIS

ESPAOL

Introduction

Safety Precautions

SAFETY INSTRUCTIONS
1. 2. Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. 9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE

NEC - NATIONAL ELECTRICAL CODE
GROUND CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
E5H01UD_V4_EN.book Page II Wednesday, October 15, 2008 10:37 AM
FCC INFORMATION (For US customers)

1. PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Note on use / Observations relatives a lutilisation / Notas sobre el uso
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.

3. NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.
Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. Eviter des tempratures leves Tenir compte dune dispersion de chaleur suffisante lors de linstallation sur une tagre. Evite altas temperaturas Permite la suficiente dispersin del calor cuando est instalado en la consola.
Keep the apparatus free from moisture, water, and dust. Protger lappareil contre lhumidit, leau et lapoussire. Mantenga el equipo libre de humedad, agua y polvo.
Do not let foreign objects into the apparatus. Ne pas laisser des objets trangers dans lappareil. No deje objetos extraos dentro del equipo.

E5H01UD_V4_EN.book Page 2 Wednesday, October 15, 2008 10:37 AM
On-Screen Display Information about the current operation can be displayed on a screen, allowing you to confirm the currently active functions (such as program playback) using the remote control. Dimmer The brightness of the front panel display can be adjusted. Screen Saver The screen saver program starts if there is no activity at the unit or its remote for more than 5 minutes. The brightness of the display is darken by 75%. The program is deactivated when there is any activity. Picture Control Picture control adjusts the picture quality of the specific display. Search Chapter search: Search for a desired chapter. Title search: Search for a desired title. Track search: Search for a desired track/file. Time search: Search for a desired time point or a title or a track/ file. Repeat Chapter: Repeated playback of a chapter of the disc. Title: Repeated playback of a title of the disc. Track: Repeated playback of a track/file of the disc. All: Repeated playback of the entire disc. (not available for BD, DVD-video) A-B: Repeated playback of a part between two points. Group: Repeated playback of a folder of the MP3/JPEG/ Windows Media Audio/DivX disc being played back is possible. Zoom x1.2, x1.5, x2.0, x4.0 magnified image can be displayed. (not available for BD) Marker Electric reference points designated by user can be called back. Resume Playback User can resume playback from the point at which the playback has been stopped even if the power is turned off. Bit Rate Indication The bit rate (the amount of video data currently being read) can be displayed during the playback of video contents. (not available for BD) DRC (Dynamic Range Control) Use this procedure to set the dynamic range of the output signals when playing back DVD/BD recorded in Dolby Digital/ Dolby Digital Plus/Dolby TrueHD. Displaying a JPEG picture Kodak Picture CD can be played back. Still images stored in JPEG format on DVD-RW/-R, CD-RW/-R or SD Memory Card can also be played back.
Playing Back Windows Media Audio File You can enjoy Windows Media Audio files which are recorded on DVD-RW/-R, CD-RW/-R or SD Memory Card. Playing Back an MP3 File You can enjoy MP3 files which are recorded on DVD-RW/-R, CD-RW/-R or SD Memory Card. Playing Back DivX File You can enjoy DivX files which are recorded on DVD-RW/-R or CD-RW/-R. Official DivX Certified product Plays all versions of DivX video (including DivX 6) with standard playback of DivX media files. Playing Back the Contents in SD Memory Card You can playback MP3, Windows Media Audio, or JPEG stored in an SD Memory Card. You can store picture-in-picture commentary, subtitles or other extras for BD-ROM Profile 1.1 files in a SD Memory Card and playback with the BD-ROM. BD-J Application With some BD that supports Java applications (BD-J), you can enjoy interactive function (e.g., game).

miniSD Card Adapter miniSD Card microSD Card Adapter microSD Card

CD-DA (audio CD)

is a trademark of DVD Format/Logo Licensing Corporation. CD-RW is trademark of Eastman Kodak Company.
About Discs Disc Handling
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. Always store the disc in its protective case when it is not used. Note that discs with special shapes cannot be played on this product. Do not attempt to play back such discs, as they may damage the unit.
CD-R Kodak Picture CD DTS - CD (5.1 Music Disc) Playable files MP3 Windows Media Audio JPEG DivX
Media DVD-RW/-R CD-RW/-R SD Memory Card (including SDHC) miniSD Card microSD Card DVD-RW/-R CD-RW/-R

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Portions of this product are protected under copyright law and are provided under license by ARIS/SOLANA/4C.

Playable Discs and Files

This unit is compatible to play back the following discs. To play back a BD or DVD, make sure that it meets the requirements for region codes and color systems as described on page 5.
E5H01UD_V4_EN.book Page 5 Wednesday, October 15, 2008 10:37 AM

Unplayable Discs

The following discs will not play back on this unit. BD-RE Ver.1.0 (BD-disc with cartridge) BD-RE (Ver.2.0) (Recorded in BDAV format) BD-R (Ver.1.0) (Recorded in BDAV format) BD contains MP3/ Windows Media Audio/ JPEG/ DivX files BD/DVD hybrid disc (e.g., Total Hi Def hybrid disc) BD-video that does not include "A" on its region code. DVD-video that does not include either "1" nor "ALL" on its region code. DVD-ROM/RAM (For DVD-ROM discs, data files in DivX 3.11, 4.x, 5.x and 6 can be played) DVD-RW/-R recorded in non-compatible recording format CD-ROM (Data files in DivX 3.11, 4.x, 5.x and 6 can be played) CDV (Only the audio part can be played) CD-G (Only the audio signals can be output) CompactDisc-Interactive (CD-I) Video Single Disc (VSD) Video CD, Super Video CD Super audio CD (Only the sound on the CD layer can be heard. The sound on the high-density super audio CD layer cannot be heard.) DVD-audio HD DVD Disc with recording area less than 55mm in diameter Unauthorized disc (Pirated disc) Unfinalized disc

Audio signals output from HDMI OUT
Disc type Audio recording format Dolby Digital HDMI Audio Out setting HDMI Multi(Normal) HDMI Multi(LPCM) HDMI 2ch Multi LPCM 2ch Downmix LPCM Dolby Digital*1 Multi LPCM*2 Multi LPCM* Multi LPCM

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet. AC outlet
Dolby Digital Plus Dolby Digital Plus*1 Dolby TrueHD Dolby TrueHD*1 DTS DTS-HD DTS*1 DTS-HD*1 Multi LPCM Dolby Digital DTS Multi LPCM Dolby Digital 2ch LPCM 2ch LPCM DTS
2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM 2ch LPCM 2ch LPCM 2ch Downmix LPCM
LPCM Dolby Digital DVD-video DTS LPCM Dolby Digital DivX MP3/MP2 audio CD/ MP3/Windows Media Audio DTS-CD
Multi LPCM*4 Multi LPCM Multi LPCM Multi LPCM Multi LPCM Multi LPCM 2ch LPCM 2ch LPCM Multi LPCM

AC 120 V, 60 Hz AC cord

STRAIGHT CABLE
OUT IN ROOM TO ROOM REMOTE CONTROL
Supplied cables used in this connection are as follows: AC cord x 1
*1If BD Audio Mode is set to Mix Audio Output audio will be output as multi LPCM. Refer to page 22. *2Outputs audio signals decoded from independent substream. *3Outputs audio signals decoded from Dolby Digital stream. *4Outputs audio signals decoded from DTS core stream. Insert the plugs securely. Incomplete connections will result in the generation of noise.
E5H01UD_V4_EN.book Page 12 Wednesday, October 15, 2008 10:37 AM

Direct Playback

BD-V DVD-V DVD-VR
may appear at the top-right on the screen when the operation is prohibited by the disc or this unit. During the playback of 2-layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. The operation may vary when you play back BD/DVD with disc menu. Refer to the manual accompanying the disc for details.

<ON/STANDBY>

[POWER ON]
Press <ON/STANDBY> or [POWER ON].
Turn on the display device and select the HDMI input on the device. Press A to open the disc tray.
Place the disc on the disc tray with its label side facing up.
Align the disc to the disc tray guide.

[ENTER]

Press A to close the disc tray.
It may take a while to load the disc.
Some discs may start playback automatically. Press B to start playback. For many of BD-video and DVD-video, a menu screen may appear. In this case, use [ / / / ] to select the desired item, then press [ENTER]. Press C once to stop playback temporarily. Refer to Resume Playback on page 14. To eject the disc: Press A to open the disc tray, then remove the disc before turning off the unit.

5) To return to the marker later, call the marker setting by pressing [SEARCH MODE] repeatedly during playback or in stop mode, and use [ / ] to choose a desired marker, then press [ENTER].

On-Screen Display

You can check information about the current disc by pressing [DISPLAY]. To call the On-Screen Display, press [DISPLAY] during playback. Each time you press [DISPLAY], the information changes. Depending on the media, available information varies.
Opening the disc tray, turning off the power or selecting AC at step 2 and pressing [ENTER] will erase all markers. To clear a marker, use [ / ] to select the marker number to be cleared and press [CLEAR]. You can mark up to 9 points. For BD-video, marker search between different titles is not available. For BD, you can return to the maker only during playback.
OFF A Title/Chapter information A Title information(elapsed time) A Title information(remaining time) A HDMI information A OFF
OFF A Chapter information (elapsed time) A Chapter information (remaining time) A Title information (elapsed time) A Title information (remaining time) A Bit rate information A HDMI information A OFF
During program and random playback, search functions are not available except the search using H / G. Time search function is available only in the same track, file or title. For some DivX files, time search may not function. For BD, chapter and time search are available only during playback.
OFF A Track information (elapsed time) A Track information (remaining time) A Disc information* (elapsed time) A Disc information* (remaining time) A HDMI information A OFF (*not available during the program/random playback)

Marker search

This feature allows you to assign a specific point on a title or track to be called back later. 1) During playback, press [SEARCH MODE] repeatedly until marker setting appears. 2) Use [ / ] to select a marker number (1-9).

-- --:--:--

OFF A File name information A File information (elapsed time*) A HDMI information A OFF (*not available for JPEG)
OFF A File name information A Tag information (title name) A Tag information (artist name) A File information (elapsed time) A HDMI information A OFF
3) When the disc reaches the point you want to set a marker, press [ENTER]. The title or track and elapsed playback time will appear on the screen. 4) Press [SEARCH MODE] or [RETURN] to exit.

1) During playback, press [SUBTITLE]. 2) Use [ / ] to select Primary Subtitle, Secondary Subtitle or Subtitle Style, then press [ENTER].
Primary Subtitle Secondary Subtitle Subtitle Style 2.ENG/255 2.ENG/255 2/25
2) Use [ / ] to select a item to be adjusted, then use [ to adjust the setting 3) Press [RETURN] repeatedly to exit. Item Contrast Brightness Sharpness Description Adjusts the difference between the bright and dark parts of the picture Adjusts the brightness of the picture.

[TOP MENU] [ / / / ]

[POP UP MENU / MENU] [ENTER] [RETURN]
Primary Subtitle: Sets the subtitle for the main picture. Secondary Subtitle: Sets the subtitle for the sub-picture. Subtitle Style: Sets style of the subtitle. 3) Use [ / ] to select your desired subtitle. 4) Press [SUBTITLE] to exit.
Adjustment range (*:default) -7 to +7 (0*) 0 to +15 (0*)

DVD-V DivX

1) During playback, press [SUBTITLE]. 2) Use [ / ] to select your desired subtitle.

1 ENG /3

Adjusts the sharpness of the -6 to +6 (0*) picture.
[SUBTITLE] [MODE] [PURE DIRECT]
3) Press [SUBTITLE] to exit.
Changes the amount of gamma correction to adjust Gamma 0 to +5 (0*) overall brightness of a Correction picture. Make dark/bright section easier to see Color Adjusts the balance -7 to +7 (0*) between the green and red.
Some discs will only allow you to change the subtitle from the disc menu. Press [TOP MENU] or [POP UP MENU / MENU] to display the disc menu. If 4 digit language code appears in the subtitle menu, refer to the Language Code on page 35. If the disc has no subtitle language or subtitle style, Not Available will be displayed. For DivX, the screen only displays the number of subtitle languages. About the button names in this explanation < >: Buttons on the main unit [ ] : Buttons on the remote control Button name only: Buttons on the main unit and remote control
E5H01UD_V4_EN.book Page 22 Wednesday, October 15, 2008 10:37 AM

Description

Adjustment range (*:default) Off* +1: Execute MPEG noise reduction witch reduce the block noise and mosquito noise on the subtitle on movie.

Virtual Surround

Setting the BD Audio Mode
You can enjoy stereo phonic virtual space through your existing 2-channel stereo system. 1) In stop mode, press [MODE] repeatedly until the virtual surround setting appears.
BD audio mode is to choose between two ways; you could output the secondary and interactive audio accompanied by the primary audio or you could output the primary audio only. Depending on the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, or DTS-HD output changes between multi LPCM and bitstream. 1) In stop mode with BD inserted, press [MODE]. 2) Use [ / ] to select desired setting. BD Audio Mode Mix Audio Output : The Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD or DTS-HD format will be converted to Multi LPCM. If it is available, secondary and interactive audio it will be output with primary audio. HD Audio Output : Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, or DTS-HD will be output in a full stream. Please refer to page 11 for output audio signals. In this mode secondary or interactive audio will not be output. The secondary audio is the audio for the sub picture (Director's comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.). 3) Press [RETURN] to exit. You can also set the BD Audio Mode from the setup menu. Refer to page 30.

Noise Reduction

Reduces the noise of the playback picture.
+2: Execute 3D noise reduction witch detect and delete the noise by comparing each picture frames. +3: Execute both MPEG noise reduction and 3D noise reduction.
2) Use [ / ] to select 1 (Natural effect), 2 (Emphasized effect) or Off. 3) Press [RETURN] to exit.
Select virtual surround Off or lower the volume if the sound is distorted. This function cannot be used during dialog speed (refer to page 15). For the virtual surround, audio signal will always be 2-channel LPCM.
The setting remains even you turn off the unit. You cannot adjust the setting during the dialog speed playback. For BD, noise reduction is not effective.

Note for DivX

Even if the file has an extension of either.avi and.divx, this unit cannot play it back if it is recorded in the format other than DivX. It may take a while for audio and images to be output after you inserted a disc and pressed B. When playing back the files recorded in high bit rates, the images can be interrupted in some occasions. Although DivX logo has been obtained for this unit, it may not be able to play back some data, depending on the characteristics, bit rates, or audio format settings, etc. A DivX file whose file size exceeds 2 GB cannot be played back. If a large-sized DivX file is selected, it may take awhile to start the playback (over 20 seconds sometimes). If you try to playback the DivX file that has the screen resolution which this unit does not support, the playback will be stopped and error message will appear. Some DivX files cannot be played back on this unit due to the configuration and characteristics of the disc, or due to the condition of recording and authoring software. Multi-session burn DivX DVD cannot be played back on this unit.
This player is not authorized to play this video. Please push MENU.
Please select the media to play back. Video Audio & Picture
Resolution Error This player does not support this video format. Please push MENU.

Note for DivX Subtitle

To utilize this function, the following conditions must meet. - DivX Subtitle must be activated in Language setting. (Refer to DivX Subtitle on page 28.) - Playback file and the subtitle file must have the same name. - Playback file and the subtitle file must locate in the same folder. - Only the subtitle files with the following extensions are supported;.smi (.SMI),.srt (.SRT),.sub (.SUB),.ass (.ASS),.ssa (.SSA),.txt (.TXT). (.sub (.SUB) and.txt (.TXT) files may not be recognized.) - The subtitles that exceeds the playback time of the DivX file will not be displayed.
Press [TOP MENU] to call up the playback media selection screen in stop mode.
E5H01UD_V4_EN.book Page 25 Wednesday, October 15, 2008 10:37 AM

Kodak Picture CD

Reading the SD Memory Card
This unit can also run JPEG files stored on Kodak Picture CD. You can enjoy picture images on the television set by playing back the Picture CD. This unit confirms to ver.7.0 of Kodak Picture CD. For details of Kodak Picture CD, contact a shop that provides developing service of Kodak Inc. When Kodak Picture CD is inserted in this unit, Kodak Picture CD menu appear automatically on the screen.
You can play back the MP3, Windows Media Audio and JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM Profile 1.1 which can be downloaded from the internet. You can store the contents on an SD Memory Card via computer and play them back with the BD-video. For more information about the special additional contents, please refer to the instruction book that came with the disc.

Picture1

Picture2

Picture3

Picture4

Picture5

Picture6

Setting the media mode

[POP UP MENU / MENU] [ [SETUP] [ANGLE] [MODE] C B / / / ]
1. Current track number/the total number of tracks 2. Indication of previous/next page In stop mode, press [POP UP MENU / MENU] to call Kodak Picture CD menu.
Use [ / / / ] to select a desired track to be played back, then press B or [ENTER]. An image will be played back from the selected track and go to the next one in turn. Press C to stop playback.
Tips for JPEG/Kodak Picture Playback
Every press on [ANGLE] will turn the image clockwise by 90 degrees when an image is displayed. To change the visual effect for switching the playback image, press [MODE] once, then use [ / ] or [ENTER] to switch between Cut In/Out and Fade In/Out. The size change may have no effect on some files (e.g. files with a small picture size). To change the size of the playback image, during the JPEG/ Kodak Picture playback. Press [MODE] twice, then use [ / / / ] or [ENTER] to switch between Normal (100%) and Small (93%). The size change may have no effect on some files (e.g. files with a small picture size).
Press [SETUP] in stop mode.

] to select

, then press [ENTER].
] to select Media Select.
Press [ENTER] repeatedly to select SD Memory.
Remote Control Setting DENON1 Media Select SD Memory
This will set the unit to SD Memory mode. To play back the contents in any discs, exit SD Memory mode by selecting Disc.

Press [SETUP] to exit.

E5H01UD_V4_EN.book Page 26 Wednesday, October 15, 2008 10:37 AM
Inserting the SD Memory Card and playback
Insert an SD Memory Card into the SD CARD slot until it clicks with the label facing up. File list will appear.

SD Memory Card

Follow the step 2 in Playing Back an MP3, Windows Media Audio, JPEG and DivX File on page 23.
Removing the SD Memory Card
In stop mode, push the SD Memory Card and then slowly remove your finger. Grasp the card and pull it out from the SD CARD slot.

Compatible Cards:

SD Memory Card (8MB - 2GB) SDHC Memory Card (4GB) miniSD Card (8MB - 2GB) microSD Card (8MB - 2GB) For miniSD Card and microSD Card, adapter will be required.

16:9 Wide YCbCr Normal Max Auto Auto Auto

Still Mode Wallpaper

Auto Picture
For how to select the setting items and options, refer to the Custom on page 27. Setting items Dialog Sets the language for audio. Options Original*/English/French/Spanish/German/Italian/ Swedish/Dutch/Russian/Chinese/Japanese/Korean/ Danish/Finnish/Norwegian/Icelandic/Hungarian/ Romanian/Turkish/Greek/Irish/Portuguese/Polish/ Czech/Slovak/Bulgarian/Other Off*/English/French/Spanish/German/Italian/Swedish/ Dutch/Russian/Chinese/Japanese/Korean/Danish/ Finnish/Norwegian/Icelandic/Hungarian/Romanian/ Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/ Bulgarian/Other English*/French/Spanish/German/Italian/Swedish/ Dutch/Russian/Chinese/Japanese/Korean/Danish/ Finnish/Norwegian/Icelandic/Hungarian/Romanian/ Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/ Bulgarian/Other English*/Franais/Espaol
For how to select the setting items and options, refer to the Custom on page 27. Setting items TV Aspect Sets a picture size according to aspect ratio of the connected display device. Options 16:9 Wide*: Select this when a wide-screen TV is connected. Disc recorded in wide screen format is played over the entire screen. 4:3 Pan & Scan: Select this to play back the disc recorded in wide screen format with 4:3 TV in the pan & scan mode (with the sides of the picture cut off). Discs which pan & scan is not specified are played in the letter box mode. 4:3 Letter Box: Select this to play back the disc recorded in wide screen format with 4:3 TV in the letter box mode. (with black strips at the top and bottom). 4:3 Squeeze Auto: When playing 4:3 images, the picture is displayed in the center of the 16:9 screen with a 4:3 aspect ratio. 4:3 Squeeze On: The picture is displayed in the center of the 16:9 TV screen with a 4:3 aspect ratio, regardless of the original image size. YCbCr*: Component format video signals and audio signals are output from the HDMI OUT. RGB: RGB format video signals and audio signals are output from the HDMI OUT.
Subtitle Sets the language for subtitle.
Disc Menu Sets the language for disc menu.
OSD Language Sets the language for OSD (on-screen display). DivX Subtitle Sets the language for DivX Subtitle.

Settings with (*) are the default. Quick menu consists of the setting menus frequently used, and they are accompanied with mark. The default of the BD Audio Mode is Mix Audio Output. If you want to output only the high quality primary audio, set BD Audio Mode to HD Audio Output.
E5H01UD_V4_EN.book Page 31 Wednesday, October 15, 2008 10:37 AM

Speaker Setting

This unit allows you to enjoy multi-channel surround sound such as 5.1-channel / 7.1-channel surround. <Example of basic layout with 7.1ch surround system>
Menu Speaker Configuration Select the desired speaker to set. Then change the setting appropriately by referring to the descriptions.

Setting items Front

Options Large* Small

Center

Large* Small
Front speaker (left) Center speaker Subwoofer

Front speaker (right)

Subwoofer Surround

On* Large* Small

Surround Back
Descriptions Large: For the large speakers with strong low frequency reproduction capabilities. Small: For the small speakers which do not provide strong bass sound You cannot change the setting of Subwoofer. If connected device is not compatible with subwoofer, Subwoofer will be displayed in gray. Select Off to deactivate the Test Tone feature. Select Manual, then press [ENTER] to manually set the volume for the desired speaker. Select Auto,then press [ENTER] to automatically output the test tone from each speakers. If you have selected Manual in Test Tone, select the desired speaker to set and adjust the volume for the selected speaker. If you have selected Auto in Test Tone, adjust the volume while the desired speaker is outputting the test tone.

Surround speaker (left)

Surround speaker (right)
Channel Level Test or set the volume for each speakers.
Surround back speaker (left)
Surround back speaker (right)
Test Tone: Test Tone is the test tone which can be out put from the speakers so that you can adjust the volume for each speaker.

Manual

To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available in Setup A Quick A HDMI Audio Out A HDMI Multi(LPCM) or Setup A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM). How to navigate through the HDMI Multi(LPCM) setting 1) Use [ / ] to select the menu item. 2) Use [ / ] to select setting items. Use [RETURN] to go back to the previous screen. 3) Use [ / ] to select desired options.(Except for Test Tone and Default.) For Test Tone: Use [ / ] to select Manual or Auto, then press [ENTER]. The test tone will be output. If you select Manual, use [ / ] to select desired speaker, then use [ / ] to adjust the volume. If you select Auto, use [ / ] to adjust the volume of the speaker that output the test tone. If you want to stop the test tone, press [RETURN]. For Default: Press [ENTER] to reset the Delay Time setting to the default. 4) Press [SETUP] to exit.

Distorted picture Completely distorted picture or black/white picture with BD/DVD No sound or distorted sound
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating Instructions for details on correct operations. Some functions are prohibited on some discs.
Picture freezes momentarily during playback Disc cannot be played back
- Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. - Clean the disc. Clean the disc. Ensure the disc label is facing up. Check if the disc is defective by trying another disc. Cancel the ratings control or change the control level. Insert a correct disc that can be played back on this unit.
SD Memory Card cannot be read. No return to start-up screen when disc is removed The unit does not respond to the remote control
- The format of the card does not match to this unit or the card is not compatible. - Reset this unit by turning it off, then on again. - Aim the remote control directly at infrared sensor window on the front of the unit. - Reduce the distance to infrared sensor window. - Replace the batteries in the remote control. - Re-insert the batteries with their polarities (+/- signs) as indicated. - Make the signal code of the remote control match to the signal code of the unit. - To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
Buttons do not work or the unit stops responding
E5H01UD_V4_EN.book Page 35 Wednesday, October 15, 2008 10:37 AM

Others Others

Language Code
Language A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian [BUL] Burmese Byelorussian C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Code 5160 Language Esperanto Estonian F-H Faroese Fiji Finnish [FIN] French [FRE] Frisian Galician Georgian German [GER] Greek [GRE] Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian [HUN] I-K Icelandic [ICE] Indonesian Interlingua Interlingue Inupiak Irish [IRI] Italian [ITA] Japanese [JPN] Javanese Kannada Kashmiri Kazakh Code Language Kinyarwanda Kirghiz Kirundi Korean [KOR] Kurdish L-N Laothian Latin Latvian;Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian [NOR] O-R Occitan Oriya Oromo(Afan) Panjabi Pashto;Pushto Persian Polish [POL] Portuguese [POR] Code Language Quechua Rhaeto-Romance Romanian [RUM] Russian [RUS] S Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak [SLO] Slovenian Somali Spanish [SPA] Sundanese Swahili Swedish [SWE] T Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Code Language Tigrinya Tonga Tsonga Turkish [TUR] Turkmen Twi U-Z Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 7267

New model information

DVD-2500BTCI

Blu-ray Disc Transport

New-generation HD Bitstream Output Support. New Blu-ray Disc Transport.
Bullet points Advanced Features
BD Transport for faithful transmission of Full HD video and HD audio signal 1080/24p output, to bring out the full quality of film HDMI output for HD video and audio signal transmission (Ver.1.3a with Deep Color, High Bit-Rate Audio Output) High-grade I/P conversion and scaling up to 1080p.

User Friendly

Plays a wealth of media formats Supports DivX file playback (Ver. 6) Supported memory cards and playback files Supports extended functions for BD-Video(*3) Includes easy-to-use remote control unit

Construction

Separate blocks to suppress interference between circuits Precision Drive Mechanism, a Denon original

Advanced Features

BD Transport for faithful transmission of Full HD video and HD audio signals
The DVD-2500BTCI is a Blu-ray disc transport that outputs video and digital audio signals (*1) via an HDMI port. When connected to a Denon A/V surround amp such as the recently-released AVR-4308CI equipped with an HD-format decoder, the DVD-2500BTCI's transport features can be used on their own to enjoy high-quality video and audio.
*1) Dolby TrueHD bitstream, Dolby Digital Plus bitstream, Dolby Digital bitstream, DTS-HD bitstream, DTS bitstream, LPCM (2-ch)
Precision Drive Mechanism, a Denon original
The DVD-2500BTCI features a unique drive mechanism that Denon newly developed for use with Blu-ray discs. To further protect the internal disc space from magnetic influences, dust, and external noise, Denon improved its mechanism unit from previous DVD players by adding a shield to the bottom and top of the unit to create an ideal playback environment inside. In addition, Denon incorporated its critically-acclaimed Suppress Vibration Hybrid (S.V.H.) loader constructed with a combination of different materials to ensure stable disc rotation and greater accuracy in reading the disc.
Supported memory cards and playback files
Plays MP3, WMA, and JPEG files on SD, SDHC, miniSD and microSD(*2) cards.
*2: A dedicated adaptor (sold separately) is required for miniSD and microSD cards.
Supports extended functions for BD-Video(*3)
Sub-video data (director's comments, etc.) recorded with movies on BD-Video discs can be enjoyed in a sub-screen along with the main screen.
*3: As of October 2007, there were no BD-Video discs that supported extended functions.
1080/24p output, to bring out the full quality of film
The DVD-2500BTCI includes 1080/24p HDMI output to faithfully reproduce video images recorded on the Blu-ray disc. When connected to a 1080/24p display, movie buffs c a n e n j o y t h e r e m a r k a ble video performance of Blu-ray that brings out the full character of film material.
Includes easy-to-use remote control unit
Video & Audio HDMI output Control RS-232C Remote control x1 x1 IN x 1, OUT x 1
HDMI output for HD video and audio signal transmission (Ver.1.3a with Deep Color, High Bit-Rate Audio Output) High-grade I/P conversion and scaling up to 1080p.

Main Specifications

Signal system Power supply Power consumption NTSC 120V, 60 Hz 30W (Standby: 0.8W) Dimensions W x H x D (incl. protrusions) 17-2/16" x 5-8/16" x 15-7/16" 434 x 139 x 391 mm
Plays a wealth of media formats
BD-ROM (BD Video), DVD-Video, DVD+R/RW , DVD-R, DVD-RW (VR mode supported), CD, CD-R/RW, and PC formats such as MP3, WMA, and JPEG written onto CD-R/RW discs.
Separate blocks to suppress interference between circuits
The video and power circuits have been separated into two independent blocks within the chassis, and to thoroughly eliminate signal degradation caused by interference between circuits, each circuit has been mounted on its own board. In addition, the top cover features a two-layered construction and the chassis bottom is constructed of three layers to protect the circuits from vibration.

Weight

20.3 lbs 9.2 kg

*Conditional.

Note: Some discs may not be playable if content has been poorly written.
Supports DivX file playback (Ver. 6)
Files recorded in the DivX moving picture compression format on DVD-R/RW, CD-R/RW or other media can be played.

HD Video decoder

HDMI Amplier

HD Audio decoder

9.1 or 7.1 AV Receiver
*Design and specifications are subject to change without notice. *"Dolby" and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation. *DTS and DTS Digital Surround are registered trademarks of DTS Technology. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. *"Blu-ray Disc" and Blu-ray Disc logo are trademarks. *Java and all other trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries. *Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. *"KODAK" is trademark of Eastman Kodak Company.