DVD2930CI_E3.qxd

06.7.21 10:25 PM

Page 1
DVD Audio-VIdeo / Super Audio CD Player

DVD-2930CI

TENTATIVE
DVD-Audio/Video & Super Audio CD Player with Full 10bit HD Video Circuit
Video Section s Latest I/P converter from Silicon Optix, Inc. The DVD-2930CI uses the latest 10-bit I/P converter developed through a joint development effort that merged image processing algorithms of Silicon Optix, Inc., and Denon video technology on the foundation of an image processing device from Teranex, a manufacturer of video processing for broadcast use in the United States. This 10-bit processing offers high conversion performance and dramatically improves motion detection capability. Multi-Directional Diagonal Filter (MDDF) technology, used for the first time in the DVD-5910, which accurately detects and corrects the directionality of lines on a per-pixel level to avoid "jaggies" that easily appear when video sources are I/P converted, ensuring smooth picture playback. s Denon Pixel Image Correction (DPIC) The Denon Pixel Image Correction feature that incorporates original Denon enhancement technology and makes high-definition video correction possible, has been advanced to even greater heights in the DVD-2930CI. Denon Pixel Image Correction performs detection and correction through 10-bit processing to significantly improve contour correction. This new contour correction circuit uses enhancement processing technology that also considers the influence of pixels surrounding the target pixels. It uses new algorithms to sample and analyze a total of 9 pixels of video data around, and including, each target pixel. Video images are detected and processed in vertical, horizontal, and diagonal directions at a highly detailed per-pixel level to produce contours that are visually more natural. Luminance and chroma signals are also processed with the same algorithms to suppress ringing noise and other artifacts that easily occur during enhancement. By performing the type of processing that is most effective for the current video image, the picture is free of degradation and appears more natural. s High-performance video scaler capable of 1080p output for HDMI The DVD-2930CI includes the latest high-performance video scaler. This high-precision 10-bit scaler works with HDMI digital video output signals. This scaler executes optimum conversion to suit the output to the independent HDMI transmitters. Users can enjoy the best picture quality for their particular applications. Also this scaler can output PC resolution VGA/XGA/WXGA and SXGA.
s Newly-developed Dual Discrete Video Circuit (DDVC) The DVD-2930CI's video circuit features Denon's own DDVC technology designed to enhance the quality of video signals. The use of dedicated circuits one independent block for composite and S-video signals, another block for component signals, and a dual DAC configuration with built-in video encoder has made it possible to reproduce detailed video images with greater precision. In order to bring out the maximum quality from both video and audio signals, the DVD-2930CI has a discrete configuration in which the video, audio, and digital blocks that comprise this universal player are all completely isolated from each another in terms of their circuit configuration, boards, and power supplies. Denon engineers have used the expertise gained from their development of earlier universal players to design a configuration that thoroughly suppresses mutual interference among the circuits and prevents noise from affecting the video and audio signals. s High-speed, high-precision 12-bit 216-MHz video DAC To ensure that high-grade video signals from the latest high-performance I/P converter are reproduced with utmost fidelity to the original images, the DVD-2930CI has an extremely fast and accurate 12-bit, 216-MHz video DAC. Oversampling of 8x for Progressive and 16x for Interlaced signals results in sharp, detailed pictures. Composite, S-video and component signals each have their own dedicated video DAC, a design that enhances the reproduction of low-level video signals and reproduces high-definition images that are faithful to the original. In addition, Noise Shaped Video (NSV) technology is used to improve the S/N of video signals and further boost their linearity. s Supports fine picture quality adjustments Besides the DPIC feature, a total of 12 picture quality adjustments are possible, including contrast, sharpness, white level, chroma level, noise reduction settings, and gamma. Up to five combinations of settings can also be stored in memory, giving the user freedom to adjust picture quality in considerable detail according to individual preferences. s Custom Integrated RS232C serial command control Remote in/out IR command control Discrete Power on/off command

*1) Version 1.1 compliant. HDMI audio output capacity is dependent on the monitor being used. *2) HDMI and DVI outputs are HDCP compliant. Video cannot be viewed if connected to a monitor that does not support HDCP; video can be viewed only on HDCP-compliant monitors.

Page 2

s Others Simultaneous output possible for all video signals Supports PAL and NTSC
Output Terminals For Every A/V System Video outputs HDMI: 1 Component: 1 set Composite: 2 S-Video: 2 Audio outputs Optical digital: 1 Coaxial digital: 1 DENON Link: 1 Analog (L/R): 1 set 5.1-channel (FL/FR/C/SL/SR/SW): 1 set Specifications Video Section Signal system NTSC Disc played DVD Audio/Video, Music CD, SuperAudioCD, CD-R/RW(audio/MP3/WMA/JPEG), Video CD, DVD-R/RW(Video mode), DVD+R/RWPicture CD Video outputs Composite Video Output 1.0 Vp-p (with 75 ohms load) S-Video Output Y; 1.0 Vp-p (with 75 ohms load), C; 0.286 Vp-p Component Video Output Y, Pb/Cb, Pr/Cr: Y; 1.0 Vp-p (with 75 ohms load), Pb/Cb; 0.648 Vp-p (with 75 ohms load), Pr/Cr; 0.648 Vp-p (with 75 ohms load) Audio Section Frequency response DVD 2 Hz - 88 kHz (192 kHz sampling), 2 Hz - 44 kHz (96 kHz sampling), 2 Hz - 22 kHz (48 kHz sampling) Super Audio CD 2 Hz - 100 kHz CD, VCD 2 Hz - 20 kHz Signal-to-noise ratio 118 dB Dynamic range 106 dB Total harmonic distortion 0.0008% General Power supply AC 120 V, 60 Hz Power Consumption 80 W Dimensions 17.1(W) x 4.0 (H) x 15.2(D), 434 (W) x 102 (H) x 386 (D) mm Weight 16.8 lbs, 7.6 kg
Audio Section s AL24 processing plus, original DENON technology for high-quality audio The DVD-2930CI employs Advanced AL24 Processing, the ultimate analog waveform reproduction technology developed by Denon, for use during PCM signal input (during stereo signal processing). In addition to the data expansion of existing AL24 Processing Plus technology, algorithms developed by Denon for use in large-capacity calculation processors such as DSPs and FPGAs are used to interpolate data along the time axis and up-converted sampling is used to achieve natural interpolation without losing original data. Greater optimization in digital filtering has also been achieved for ringing-free pulse response and for pulsive music data and attack sounds. This results in more natural reproduction of spatial information such as the delicate nuances in the music, the locations of the performers, and the breadth, height and depth of the concert hall. For multi-channel linear PCM audio playback, AL24 Processing Plus technology works to faithfully reproduce the original sound of recordings. s All channel equal 24-bit, 192kHz Audio D/A Converter The DVD-2910 uses a 24-bit, 192-kHz audio D/A converter that is well protected from noise caused by fluctuations in current from the power supply. Since the level of quantization noise within the frequency range is uniform for all frequencies, this D/A converter ensures that all the sound you hear is as clear and noise-free as possible. s s s s Pure Direct mode, for greater purity in the audio signal DENON Link 3rd, for high-grade audio transmission HDMI output, for multi-channel audio Bass management function tailored for home theater environments

Construction s Construction designed to thoroughly suppress vibration and mutual interference among circuit blocks Three-box layout to isolate circuits and minimize mutual interference Thorough vibration-resistant construction s DENON original high-accuracy drive mechanism Other Features s Supports playback of a wide variety of discs s Playback frequency ranges of Super Audio CDs are switchable (50 kHz / 100 kHz) s Independent bass management for analog audio output and HDMI audio signals s Remote controller with backlight keys s Wide pitch pin terminal
* Design and specifications are subject to change without notice. * Dolby, Dolby Digital, Pro Logic, and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation. * DTS and DTS Digital Surround are registered trademarks of DTS Technology. * WMA (Windows Media Audio) is a audio codec developed by Microsoft. in the United States of America. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. * NSV and Super Sub Alias Filter are registered trademarks of Analog Devices, Inc. * HDCD, High Definition Compatible Digital and Microsoft are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. * KODAK is a trade mark of Eastman Kodak Company. * Super Audio CD is a registered trademark of Sony.
Denon Electronics (USA), LLC. 100 Corporate Drive Mahwah, New Jersey 07430 USA TEL: 201-762-6500 www.usa.denon.com Denon Canada Inc. 505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1 TEL: 905-475-4085 ca.denon.com
Denon Brand Company D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com