New model information

PMA-510AE

Integrated Amplifier

Integrated amplifier with enhanced audio dynamics
The PMA-510AE features High-Current Single-Push-Pull circuitry to achieve both strength and detail in music playback, which is DENON's focus for its pure audio amplifiers. DENON's engineers have used their extensive knowledge of audio technology to create an integrated amplifier that is a step up in class from previous designs. For improved convenience, the remote control unit that comes with the PMA-510AE includes the main functions that control DENON CD players.

Premium Silver

Features
High quality sound igh Current (HC) Single-Push-Pull Circuit for musical detail and power H ide dynamic range, supporting high-grade audio sources W ain transformer with separate power supplies for analogue and M digital circuits icro-processor stop mode, for higher sound quality M ibration-resistant design with Direct Mechanical V Ground Construction uropean sound-tuned E Useful Functions ewly-designed system remote control N hono Equalizer Amp (MM), for connecting an analogue record player P eadphone jack H Others ess than 0.3 W in standby L luminium front panel, befitting of the elegance of a high-end A audio product esign matches the new DCD-510AE CD player D
High quality sound High Current (HC) Single-Push-Pull Circuit for musical detail and power The PMA-510AE incorporates HC transistors with 2 to 3 times the electrical current supply capability of conventional power transistors for audio. DENONs acclaimed HC Single-Push-Pull Circuit has been inherited from its high-end models which, together with a fully discrete amplifier design, produces a powerful sound filled with beautiful musical details. High-speed, high-capacity power supply circuit for HC Single-Push-Pull The PMA-510AEs power circuit uses a block capacitor that DENON engineers have jointly developed with a parts manufacturer and a Schottkybarrier diode that features low internal resistance for low loss, short recovery time, and negligible rectifying noise. This highly stable electrical current supply further brings out the expressive power of sound produced by the HC Single-Push-Pull Circuit. Wide dynamic range, supporting high-grade audio sources The PMA-510AEs tone control and power amplifier circuit have been carefully adjusted to secure a frequency response of up to 100 kHz during actual use. Also, improvements in the volume circuit suppress noise in the amplifier to achieve high sonic resolution. These features and others give the PMA-510AE plenty of latitude to handle the wide dynamic range of high-grade audio sources such as Super Audio CD and DVD-Audio. Main transformer with separate power supplies for analogue The coiled wire within the power transformer for the audio signal and control circuits has been separated to eliminate mutual interference and adverse inuences on sound quality. The PMA-510AE also has a separate transformer to minimize power consumption when in "standby". Ensuring a more environmentally friendly design. Micro-processor stop mode, for higher sound quality The Micro-processor Stop Mode automatically stops all operations of the micro-processor when it is not needed during playback. By stopping the oscillation of the micro-processors clock during normal listening, the audio signal is protected from noise and the quality of sound is improved. Vibration-resistant design with Direct Mechanical Ground Construction The power transformers, themselves a source of vibration, have been placed near the base of the unit and immediately above the insulators to allow direct dissipation of unwanted vibrations, minimizing propagation through the unit.
Signal Level Divided Construction The PMA-510AE employs DENONs Signal Level Divided Construction (SLDC) in which the circuits for small and large signals, the micro-processor, and other circuits are separated in an ideal manner to minimize mutual interference. "Source Direct" function for clean, pure audio reproduction (simple & straight signal) The PMA-510AE includes a Source Direct function that allows the audio signal to bypass the Bass, Treble, Loudness, and Balance control circuits and maintain its purity for optimum sound transparency during playback. This Source Direct function works for all inputs. Every detail of the design devoted to high-quality sound The relay switch used for CD and Phono input contains an inert gas to prevent the occurrence of noise that can negatively affect the signal. In addition, durable parts strictly selected for their contribution to sound quality, such as the large-capacity block capacitor for the power supply circuit, high-quality sound carbon resistors, and high-quality sound capacitors, are also used. Each individual part employed in configuring the circuits reflects this emphasis on high sound quality. Useful Features Newly-designed remote control unit The PMA-510AEs remote controls the main volume, function switching, muting, and remote power on/off (linked with an AC outlet). The system remote also controls DENON CD players and tuners. [CD player operations] - Numerical buttons - Program / direct play - Random play - Repeat playback - Play / pause - Stop - Reverse-skip - Forward-skip etc. [Tuner operations] - Preset selection Others Speaker A / B switches Front panel layout, designed for ease of use

Main Specifications Power amplifier section Rated output 45 W + 45 W (8 ohms, 20 Hz - 20 kHz, THD 0.07%) 70 W + 70 W (4 ohms, 1 kHz, THD 0.7%) Total harmonic 0.02% (8ohms, 1 kHz) distortion Preamplifier section Phono equalizer 150 mV (REC out terminal) rated output Input sensitivity / Impedance 100 mV/47 kohms Line (Source Direct: OFF) 100 mV/16 kohms (Source Direct: ON) Phono 2.5 mV/47 kohms RIAA deviation Phono 20 Hz - 20 kHz, 0.5 dB Signal-to-noise ratio (IHF A network) Line 105 dB (Source Direct: ON) Phono (MM) 84 dB (input terminals shorted, input signal 5 mV) Tone controls Bass 100 Hz, 8 dB Treble 10 kHz, 8 dB General Power supply Power consumption
AC 230 V, 50 Hz 185 W (Stand-by: less than 0.3 W) Dimensions (W x H x D) 434 x 121 x 307 mm Weight 6.5 kg Ports In

Out Other

Phono (MM) CD Tuner Line Recorder-1 (Playback) Recorder-2 (Playback) Recorder-1 (REC) Recorder-2 (REC) AC outlet
x1 x1 x1 x1 x1 x1 x1 x1 x1

Ideal completion

DP-200USB Fully automatic record player
*Design and specifications are subject to change without notice. DENON is a trademark or registered trademark of D&M Holdings, Inc.
TU-1500 FM-RDS/AM Radio Tuner

DCD-510AE CD-Player

DENON Deutschland Division of D&M Germany GmbH An der Landwehr Nettetal Germany Tel.: 02157-12080 Fax: 02157-120810 www.denon.de